Trouble with panning modes, volume levels the same on mixdown...

First of all, I don't think the explanation in the manual is comprehensive, I get what they're saying but it seems there's some quirks. Maybe someone can help me sort this out.
Left/Right Cut (logarithmic) Vs. -3dB Center
Stereo Panning Mode
Select Left/Right Cut (logarithmic) to pan left by reducing the volume of the right channel, and pan right by reducing the left channel volume. The channel being panned to doesn’t increase in volume as panning gets closer to 100%. Or select Equal‑Power Sinusoidal to pan left and right channels with equal power, so that a hard pan left has the same loudness as both channels together.
^I understand that, however, I have some questions and it could also be a setting issue on my end or a software malfunction.
Previously when mixing, Switching between these modes under preferences>multitrack before mixdown used to make one mixdown louder/softer then the other, this no longer occurs, the mixdown volume is the same even if I switch modes then make a new selection and re-select the clips for mixdown. It is supposed change the volume of the mixdown, correct? Or am I wrong?
Secondly, under "advanced session properties" the settings: Left/Right Cut (logarithmic) Vs. -3dB Center seem to have the opposite effect as with the mixdown settings, in "advanced session properties" the -3dB settings makes the session have less amplitude.
Where as, before the mixdown setting stopped working, I do believe that -3dB made the mixdown louder and the Left/Right Cut Logarithmic made it less loud, is this right?
Maybe I'm just confused, anytype of clarification would be greatly appreciated as I don't feel the manual is that clear on this issue.

I think that most of your confusion is probably caused by not restarting Audition (yes, the whole thing) after you've changed the setting each time - if you don't do this, it gets very confusing, and doesn't work.
If you want to see exactly what's happening in each case, then the best way to do it is to record some -3dB tone, and pan that in both modes. It's then very clear...

Similar Messages

Several of us have a iPhone 6s and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Several of us have a iPhone 6plus and are having trouble with hearing and speaking at the same time when using the phone. ? The speakers seem to be too far apart? Are others having this issue? Solutions?

Not having the problem, don't personally know anyone who is.

Is there any "mechanical" helper to get my volume levels the same?

I create playlists from ratings,(and comments),- and albums have different volume levels. As I always use my ipod to go to sleep, it is very destructive, to not be able to hear my music one minute, and then have it much too loud the next.
Is there ANYTHING, free or chargeable, physical or software, that can help me get my itunes library to all the same volume level. My problem is agrivated by the fact that I do have some shared downloads, and also someone put my vynils onto cd for me, but at a lower volume.
I might add, that I'm still a learner on the computer. I have been told to change the soundcheck -playback -preferences -itunes. I have tried it, ticked and unticked - it doesn't make any difference.
I'd be very gratefull for some advice. Please HELP, this has been going on for ages. Thank you, in anticipation.

I'm SO very grateful for your help! Have downloaded it, and have started to use it, but havn't listened to results yet.(just about to) THANKYOU SO MUCH.
Thankyou so much again, this could be the end of a long (negative) era!
A bit later: have listened to a little, seems a huge amount better. will update when used properley.
I'm anticipating some being way out. Though it says it can overcome old changed volume levels, is it best in your opinion, to put them back to original setting?
Many Best Wishes Vonnie

ITunes: Is there a setting to keep the volume level the same?

Anyone know whether there is a way to adjust playback volume when making a mixed playlist? Very annoying to have to always turn the volume up and down when listening.

iTunes has this feature called Sound Check. It basically puts all the music in similar volume so everything will have the same loudness. Go to iTunes>Preferences>Playback. Check "Sound Check."

Troubles with multiple ESLL-SRVPOS in the same outline agreement line item!

Hi all,
Currently have an issue where the same service master is being used multiple times in a single outline agreement line item (set up with different groups in the service specifications with different rates).
This is causing issues with drawing services into purchase orders.
Eg: In ME57 when creating a PO from a PR, in the include LMLSPF5J /SEARCH_SRVPOS_CONT/ the system is checking if ESLL-KNT_INTROW is empty (which in my case it is, and message SE361 is displayed).
The main thing thats happening is that ESLL_KNT_PACKNO and ESLL_KNT_INTROW, which hold the reference data to the outline agreement in the PO should get filled with the packno and introw from the oa service line but it isnt happening.
I'm thinking of creating a validation so that the same service service number (ESLL-SRVPOS) CANNOT be used in the same outline agreement line item.
Wondering if anyone has had this same issue and what path they went down to resolve it.
Any ideas would be appreciated.
Tim

hi
u cannot do this because different line items cannot be in same cell as they are variable and only one field can be there ata atime in one column while creating field catalog
<b>u can do one thing. corresponding to sales order u can display its line items ion the secondary list and would make more sense also. for this make ur sales order number as HOTPOT on click of which will display its corres line items </b>
regards
ravish
<b>reward if useful</b>
Message was edited by:
ravish goyal

When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

When im facetiming with someone and im watching a youtube video at the same time, the volume for the youtube video is lowered and the facetime volume stays the same, how can i change that?

Have you ever even used skype on an iphone or ipod? We tried it and there is no way to type to each other while you are video chatting. You can do the typing during the video on a COMPUTER, but not on an iphone or ipod.

I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords

I have been having trouble with my iphone 4 for the past day . i tried to update it to 7.0.4 then the screen went blank and it keeps telling me to connect to itunes . I have connected it to 2 computers , using different cords and it doesnt recognize it . It says it is in recovery mode and i need to restore . after clicking restore it says that my iphone cannot be restored . I am very frustrated because i have been online searching for solutions all day and nothing seems to work . As soon as i turn on my phone it goes to the apple logo for about 2 seconds then the connect to itunes screen . SOMEBODY PLEASE HELP ! my phone is my life and i need it back on .

Connect the device to iTunes and restore from the most current backup.
If the issue continues, restore as new.

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device

I have a production mobile Flex app that uses RemoteObject calls for all data access, and it's working well, except for a new remote call I just added that only fails when running with a release build. The same call works fine when running on the device (iPhone) using debug build. When running with a release build, the result handler is never called (nor is the fault handler called). Viewing the BlazeDS logs in debug mode, the call is received and send back with data. I've narrowed it down to what seems to be a data size issue.
I have targeted one specific data call that returns in the String value a string length of 44kb, which fails in the release build (result or fault handler never called), but the result handler is called as expected in debug build. When I do not populate the String value (in server side Java code) on the object (just set it empty string), the result handler is then called, and the object is returned (release build).
The custom object being returned in the call is a very a simple object, with getters/setters for simple types boolean, int, String, and one org.23c.dom.Document type. This same object type is used on other other RemoteObject calls (different data) and works fine (release and debug builds). I originally was returning as a Document, but, just to make sure this wasn't the problem, changed the value to be returned to a String, just to rule out XML/Dom issues in serialization.
I don't understand 1) why the release build vs. debug build behavior is different for a RemoteObject call, 2) why the calls work in debug build when sending over a somewhat large (but, not unreasonable) amount of data in a String object, but not in release build.
I have't tried to find out exactly where the failure point in size is, but, not sure that's even relevant, since 44kb isn't an unreasonable size to expect.
By turning on the Debug mode in BlazeDS, I can see the object and it's attributes being serialized and everything looks good there. The calls are received and processed appropriately in BlazeDS for both debug and release build testing.
Anyone have an idea on other things to try to debug/resolve this?
Platform testing is BlazeDS 4, Flashbuilder 4.7, Websphere 8 server, iPhone (iOS 7.1.2). Tried using multiple Flex SDK's 4.12 to the latest 4.13, with no change in behavior.
Thanks!

After a week's worth of debugging, I found the issue.
The Java type returned from the call was defined as ArrayList. Changing it to List resolved the problem.
I'm not sure why ArrayList isn't a valid return type, I've been looking at the Adobe docs, and still can't see why this isn't valid. And, why it works in Debug mode and not in Release build is even stranger. Maybe someone can shed some light on the logic here to me.

Can I transfer my CC 6 apps to a new Volume on the same iMac? I would much rather disable and downlo

Can I transfer my CC 6 apps to a new Volume on the same iMac? I would much rather disable and download to new Volume. I couldn't use Adobe CC6 or CS 6 at all because my iMac was so messed up?

Romeobot if you faced difficulties with your previous computer then I would recommend you reinstall the software on the new computer. In fact you may want to install the Adobe applications prior to migrating or transferring any files to your new computer. For information on how to install your Adobe Creative applications please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html.

Keep the zoom level the same when scrolling through photos

To decide which is the best photo that i’ve got, i usually compares the details by zooming and switching through photos back and forth, but keep the zoom level the same..
The problem is, in iPhoto 11 i can’t do this..
Because everytime i scroll to another photo, it always zoomed out by itself..
Does anybody know how to retain the zoom level when scrolling through images?

How hare you zooming? When I double click on a photo to bring up its full sized image and use the keyboards arrow keys to scroll thu the size stays the same? Is that how you're doing it?
Have you tried using the Full Screen mode?
OT

I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-

Hi, everyone.
I'm Having trouble with OWA and Certs after the Rollup 7 for SP3 installation. any idea? update 2961522-
after running get-OWAVirtualDirectory or test-OWAConnectivity i'm getting a message that says "OWA it's Orphan, No Metadata information can be found."
I only have the OWA users impacted.- anywhere users, and ActiveSync are working well.-
Thanks,
Fabian Alberto Campo
MCT-MCSA 2012-MCITP365-MCTS
Fabián A. Campo H. Consultor tecnico @ IXO Ltda. MCT MCP MCTS MCSA HP-APS Cra. 67 No. 167 – 61 of 303 Bogotá, Colombia

Hi Fabian,
Is there any error code when user access their mailbox on OWA. Please confirm if there is no results returned in EMS when you run Get-OWAVirtualDirectory cmdlet. Also check whether there is any Event Logs related to OWA in Exchange.
In IIS manager, make sure the OWA virtual directory is listed in the Default Web Site. In EMC, we can navigate to Server Configuration > Client Access, select server and turn to Outlook Web App tab. Then we can click Reset Virtual Directory in the right
Actions pane to reset OWA virtual directory.
Additionally, please restart IIS service by running iisreset /noforce from a Command Prompt window.
Regards,
Winnie Liang
TechNet Community Support

Cannot sync my iphone with itunes as it says it is already synced with another itunes library on the same computer.

On connecting my iphone 4S to itunes I am unable to add any music from my itunes library and get a message saying it is already synced with another itunes library on the same computer. As far as I am aware I only have one itunes library on the computer. Does anyone know how to fix this error please?
iPhone and iTunes software fully up to date.
Thanks!

iOS: Device not recognized in iTunes for OS X - Apple Support

Apple TV with Multiple Mac's in the same house & a PC

Question--
I recently got a used Apple TV for christmas. I successfully synched it with my Macbook but I haven't tried to synch the content from my iMac or PC. I'm wondering if I can synch content from two seperate mac's & my PC and not have the content from the first Mac erased. The Apple TV has a 150 GB Hard drive so I figure i can use it as a mass media storage device for all of my computers.
So I am curious if all of my computers can play nice with my Apple TV at the same time without having content erased automatically. I would have already tried it but it takes so long to synch all of my content that I don't want to risk it especially if it doesn't work.
What codecs does the Apple TV support? Can I put Divx and Xvid movies in my iTunes Movies folder and have them play? Or do I need to convert them to an Apple friendly file.
Thank You

OK
Important things first:
1 - there is no way (short of hacking/dismantling) AppleTV to get media off it
2 - therefore you MUST NOT use it as a mass storage/backup device
3 - you must keep copies of files synced (copied) to it in a single iTunes library
4 - if you delete those files and sync again they will go from AppleTV too
You can only sync a single library, but you can stream up to 5.
Codecs are limited to MP4/h264, see here:
http://www.apple.com/uk/appletv/specs.html
Anything else needs to be converted.
AC

Can 2 different users with 2 different Iphones use the same itunes to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

can 2 different users with 2 different Iphones use the same itune program to backup each phone separately? if not how can I have a backup for 2 different iphones on the same laptop?

Here is your answer:
http://support.apple.com/kb/HT1495

How can I edit multiple clips with different frame rates on the same timeline

how can I edit multiple clips with different frame rates on the same timeline

You do not want to edit material from different frame rates on one timeline. You CAN do this, but it is a very bad idea - and this is why.
Once you establish the sequence frame rate - lets say it is PAL material at 25fps, any material that you drop into the sequence other than 25 fps will have to be changed to play at 25 fps. If the material you add is NTSC (29.97), FCP will DROP 5 frames per sec to bring the frame rate down to 25 fps. Which 5 get thrown away? Every 6th one. This yields a funky cadence that becomes even more complex as as there are also interlaced fields (DV/NTSC is an interlaced format). Oh, and by the way, the image sizes are different as well. DV/PAL has 576 lines of resolution and DV/NTSC has 480. FCP has to scale up the NTSC to fit the PAL frame.
You do not want FCP adjusting these things on the fly. You want to do a thoughtful (and time consuming) conversion so that you end up with all your material in one format with the best possible image from the conversion process. Compressor can do an adequate job with Frame Controls turned on. The Natress Standards Conversion FCP plugin is another way to go. A third option is to find a post house that can do the conversion for you using a hardware based process.
The good news is, once everything is in the same format, editing it will be painless and the output process very quick.
Whatever frame rate/ image size you select, I'd suggest using ProRes for the codec. It is 4:2:2 color and will withstand color correction and composting with much more grace than any variant of DV based codecs.
Have fun.
x

Trouble with panning modes, volume levels the same on mixdown...

Similar Messages

Maybe you are looking for