Trouble writing to /dev/pf using dlpi
I have a user-mode program running on Solaris 8 that uses the dlpi interface to the fddi device, /dev/pf. The progam is unable to successfully transmit a message.
When I use write(2), the message appears numerous times, perhaps 26, 320, 231, etc. I use snoop(1M) to identify the behavior and confirm the message content. The number of copies of the message varies with each single call to write(). If I call write() twice with the same message, I get a different number of copies of the message each time. This use of write() works on /dev/hme, though. How do I diagnose the problem?
Alternatively, if I use putmsg(2), I get no error, but the message doesn't appear from fddi. I am most suspect of the address specified in the unitdata request. The documentation says to use the address provided from an info request. I have used that address, but it didn't work. I am concerned because that address is 0:0:0:0:0:0, sap=1. I can find no sample code example that shows how to build a unitdata request from known (non-argument) values.
With both methods, the program successfully opened, attached and bound. An info request confirms the stream is in the DL_IDLE state.
uname -a --> SunOS gbsa01 5.8 Generic_108528-06 sun4u sparc SUNW,Ultra-Enterprise
I type this into the terminal:
+$ echo "01Z0002AAHello World_02" > /dev/cu.usbserial0+
Just guessing, but I would try different line endings and maybe a couple of each:
<pre style="padding-left: .75ex; padding-top: .25em; padding-bottom: .25em; margin-top: .5em; margin-bottom: .5em; margin-left: 1ex; max-width: 80ex; overflow: auto; font-size: 10px; font-family: Monaco, 'Courier New', Courier, monospace; color: #444; background: #eee; line-height: normal">printf "_01Z00_02AAHello World_02\r\n" > /dev/cu.usbserial0
printf "_01Z00_02AAHello World_02\r\n\r\n" > /dev/cu.usbserial0
printf "_01Z00_02AAHello World_02\r" > /dev/cu.usbserial0
printf "_01Z00_02AAHello World_02\r\r" > /dev/cu.usbserial0
printf "_01Z00_02AAHello World_02\n\n" > /dev/cu.usbserial0
</pre>
Cole
Similar Messages
-
Trouble writing pixel array back to gif file
Hi everyone. I am in the middle of constructing a steganography api for a final year group project. I have taken out the pixels into an array from a gif file. I am having trouble writing it back to a gif file. Here is my code:
import javaSteg.stegoLibrary.*;
import java.awt.*;
import java.awt.image.*;
import java.io.*;
import Acme.*;
import Acme.JPM.Encoders.*;
public class Gif extends Canvas{
public void encodeGif(byte[] imageData){
//create toolkit obarrayPointerect
Toolkit t = Toolkit.getDefaultToolkit();
MediaTracker tracker = new MediaTracker(this);
//decode specified Gif cover
Image img = t.createImage(imageData);
tracker.addImage(img,0);
try{
tracker.waitForAll();
catch(InterruptedException e){
System.out.println("Tracker interrupted.");
//retrive picture from image
int[] pix = new int[img.getWidth(this) * img.getHeight(this)];
PixelGrabber pg = new PixelGrabber(img, 0, 0, img.getWidth(this), img.getHeight(this), pix, 0, img.getWidth(this));
try{ pg.grabPixels();
} catch (InterruptedException ioe) {
System.err.println("Interrupted");
if ((pg.getStatus() & ImageObserver.ABORT) != 0) {
System.err.println("image fetch aborted or errored");
return;
//put into byte array
byte[] pixels = new byte[img.getWidth(this) * img.getHeight(this)];
for(int arrayPointer=0;arrayPointer<pix.length;arrayPointer++){
pixels[arrayPointer] = new Integer(pix[arrayPointer]).byteValue();
//edit pixels not implemented yet
//assign edited pixels to an image
img = t.createImage(pixels);
// Now encode the image using ACME free GIF encoder (www.acme.com)
try{
FileOutputStream fos = new FileOutputStream("D:\\result.gif");
GifEncoder encoder = new GifEncoder(img, fos);
encoder.encode();
fos.close();
}catch(IOException e) {
System.out.println("FATAL IOException "+e);
From this i get a single pixel in my output gif file. Is there a way of swapping out the edited pixels with the origonal pixels in the image file? or an alternative way to write back the complete file.
Thanks a lot
MickyTive managed to solve it. For those who come across this thread and want to know the solution i needed to use MemoryImageSource with the pixels inorder to pass them to the createImage method :o)
-
Trouble writing PDF out of Framemaker 7.1
Hello,
I have an old version of Framemaker, 7.1, and I'm having trouble writing a pdf. Our office is all Windows based. On two machines, when I write the pdf, I can't get it to create crop marks and I lose chucks of text, indents are changed and spacing between paragraphs are changed. On a third machine, I get the pdf to render just fine with the crop marks. The settings we use on all three machines is the same. The problem I have is, the good PC is leaving next week when the owner goes traveling on buisness.
Can anyone offer me any suggestions, please? Thank you.
JeffMy first suggestion would be to provide us with some more info. ;- )
Your OS, exact version of FM(from Help > About -- the p number), version of Acrobat, and anything else that seems relevant.
Or to cut to the chase, you could confirm that you have the highest patch levels of FM and Acrobat, and if you have XP, that you're also fully patched there -- including the Microsoft HotFix for PS printers (such as Acrobat) -- http://support.microsoft.com/?id=952909 -- it applies to all PS printers, including the logical PDF you're using, and one of the fixes is the missing text you mentioned.
Cheers,
Art -
Trouble Writing Large Files to Time Capsule - Windows 7
Hi
I'm having some trouble with my Time Capsule. I can access it and read files from it fine. However, I have trouble writing files to it. Small files ( say multiple word docs) write fine. However, with medium size files (say 120 mb) it crashes. I have noticed that no matter how large the file is, it writes up to 10% of the file very quickly but then crashes. It fails with the error message that 'the network location specified is no longer available'. Sometimes, when it crashes, it essentially crashes my Time Capsule network. I.E I am still connected to the internet but I can access the Time Capsule.
I used to be able to write files (when I was using Vista) no problem. I still have 250gb left.
What can I do to fix this?
For details:
500gb Time Capsule
Windows 7 64bit Home Premiumanyone know how to help?
-
I'm having trouble writing a polynomial code.
I'm having trouble with a polynomial code I'm supposed to conjour it. It's simply a code that adds, subtracts, and multiplies polynomials. However, there are a few methods I do not know how to come up with (I left them blank), and when I test the code write now, it doesn't work. Here's the code -- can anyone help?
public class Polynomial implements Cloneable {
private int m_degree;
private double[] m_coefficient;
// This is the default constructor
public Polynomial() {
super();
m_degree = 0;
m_coefficient = new double[5];
// This allows the user to build a polynomial by putting a constant in
public Polynomial(double constant) {
this();
m_coefficient[0] = constant;
public Polynomial(Polynomial source) {
// These are the getters
public double getCoefficient(int degree) {
return m_coefficient[degree];
public int getDegree() {
return m_degree;
// These are the setters
public void addToCoefficient(double amount, int degree) {
m_coefficient[degree] += amount;
public void assignCoefficient(double newCoefficient, int degree) {
m_coefficient[degree] = newCoefficient;
public void clear() {
for (int i = 0; i < m_coefficient.length; i++) {
m_coefficient[i] = 0;
public void reserve(int degree) {
// These are other, useful methods
public int nextTerm(int k) {
int value = 0;
return value;
public double eval(double x) {
double value = 0;
// This goes through all the exponents in the polynomial
for (int i = 0; i < getDegree(); i++) {
// += allows you to add instead of overriding the next term
value += getCoefficient(i) * Math.pow(x, i);
return value;
// Here is our addition method
public static Polynomial add(Polynomial p1, Polynomial p2) {
Polynomial newPolynomial = new Polynomial();
// We have to find the bigger polynomial so we know how to set the loop
if (p1.getDegree() >= p2.getDegree()) {
for (int i = 0; i < p1.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
+ p2.getCoefficient(i), i);
} else {
for (int i = 0; i < p2.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
+ p2.getCoefficient(i), i);
return newPolynomial;
// Here is our subtraction method
public static Polynomial subtract(Polynomial p1, Polynomial p2) {
Polynomial newPolynomial = new Polynomial();
// We have to find the bigger polynomial so we know how to set the loop
if (p1.getDegree() >= p2.getDegree()) {
for (int i = 0; i < p1.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
- p2.getCoefficient(i), i);
} else {
for (int i = 0; i < p2.getDegree(); i++) {
// The order is important with subtraction so they cannot be
// switched
// The equation is allowed to be negative, but the exponent
// cannot be
newPolynomial.addToCoefficient(p1.getCoefficient(i)
- p2.getCoefficient(i), i);
return newPolynomial;
// Here is our multiplication method
public static Polynomial multiply(Polynomial p1, Polynomial p2) {
Polynomial newPolynomial = new Polynomial();
if (p1.getDegree() >= p2.getDegree()) {
for (int i = 0; i < p1.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
* p2.getCoefficient(i), i);
} else {
for (int i = 0; i < p2.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
* p2.getCoefficient(i), i);
return newPolynomial;
// Here is our clone method
public Polynomial clone() {
Polynomial poly;
try {
poly = (Polynomial) super.clone();
} catch (CloneNotSupportedException e) {
throw new RuntimeException(
"Class does not implement cloneable interface");
return poly;
}We've been working with arrays, and we have to write a code that adds, subtracts, and multiplies polynomials. I'm having trouble with a few of the methods. I've assigned m_degree and m_coefficient as the fields I need to use.
Right now, as my code stands, when I test it with a polynomial in main, it doesn't work. So right now, there's a mistake preventing what I have so far from properly functioning.
I am also having trouble writing the following methods:
reserve: We have to allocate memory to the polynomial every time it changes so we make sure we always have enough space to work with it.
nextTerm: We need this to jump to the next term in the polynomial, but I'm not quite sure how to do it. I didn't even realize it was possible.
I'm horrible at commenting and explaining my code, but if you read over it just a little bit, you may be able to get the gist of what I'm trying to do. Thanks for any help, and sorry if I can't explain well.
public class Polynomial implements Cloneable {
private int m_degree;
private double[] m_coefficient;
// This is the default constructor
public Polynomial() {
super();
m_degree = 0;
m_coefficient = new double[5];
// This allows the user to build a polynomial by putting a constant in
public Polynomial(double constant) {
this();
m_coefficient[0] = constant;
public Polynomial(Polynomial source) {
// These are the getters
public double getCoefficient(int degree) {
return m_coefficient[degree];
public int getDegree() {
return m_degree;
// These are the setters
public void addToCoefficient(double amount, int degree) {
m_coefficient[degree] += amount;
public void assignCoefficient(double newCoefficient, int degree) {
m_coefficient[degree] = newCoefficient;
public void clear() {
for (int i = 0; i < m_coefficient.length; i++) {
m_coefficient[i] = 0;
public void reserve(int degree) {
// These are other, useful methods
public int nextTerm(int k) {
int value = 0;
return value;
public double eval(double x) {
double value = 0;
// This goes through all the exponents in the polynomial
for (int i = 0; i < getDegree(); i++) {
// += allows you to add instead of overriding the next term
value += getCoefficient(i) * Math.pow(x, i);
return value;
// Here is our addition method
public static Polynomial add(Polynomial p1, Polynomial p2) {
Polynomial newPolynomial = new Polynomial();
// We have to find the bigger polynomial so we know how to set the loop
if (p1.getDegree() >= p2.getDegree()) {
for (int i = 0; i < p1.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
+ p2.getCoefficient(i), i);
} else {
for (int i = 0; i < p2.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
+ p2.getCoefficient(i), i);
return newPolynomial;
// Here is our subtraction method
public static Polynomial subtract(Polynomial p1, Polynomial p2) {
Polynomial newPolynomial = new Polynomial();
// We have to find the bigger polynomial so we know how to set the loop
if (p1.getDegree() >= p2.getDegree()) {
for (int i = 0; i < p1.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
- p2.getCoefficient(i), i);
} else {
for (int i = 0; i < p2.getDegree(); i++) {
// The order is important with subtraction so they cannot be
// switched
// The equation is allowed to be negative, but the exponent
// cannot be
newPolynomial.addToCoefficient(p1.getCoefficient(i)
- p2.getCoefficient(i), i);
return newPolynomial;
// Here is our multiplication method
public static Polynomial multiply(Polynomial p1, Polynomial p2) {
Polynomial newPolynomial = new Polynomial();
if (p1.getDegree() >= p2.getDegree()) {
for (int i = 0; i < p1.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
* p2.getCoefficient(i), i);
} else {
for (int i = 0; i < p2.getDegree(); i++) {
newPolynomial.addToCoefficient(p1.getCoefficient(i)
* p2.getCoefficient(i), i);
return newPolynomial;
// Here is our clone method
public Polynomial clone() {
Polynomial poly;
try {
poly = (Polynomial) super.clone();
} catch (CloneNotSupportedException e) {
throw new RuntimeException(
"Class does not implement cloneable interface");
return poly;
} -
Having trouble connecting column to column using niSwitch on a PXI 2530
Having trouble connecting column to column using niSwitch vi on a PXI 2530 matrix module. I have configured my switch using Switch Executive, have identified aliases, and verified routes and route groups. When I use LabVIEW to connect column to column I get an error reading "cannot find connection between c0 and c1". c0 and c1 are example columns I want to connect. Any help is appreciated.
You can find NISE VIs in the function pallete in LV if you have installed LabVIEW support when you installed NISE (this is selected by default in the installer if you had LV installed before installing NISE).
Also, choose between niSwitch and NISE based on your need - if all you ever do is connect two channels in your application, then configuring a NISE virtual device is probably an overkill (and so is using a switch in this case:-) . However, if you are going to manage multiple routes, then using NISE configuration will let you create named routes and route groups, which you can then invoke (connect/disconnect) in your application and have the configuration part managed outside your application. The code would then concentrate solely on establishing a necessary connection(s) via connecting a route or a route group, while if you were to use niSwitch for this purpose, you would have to keep the logic of connecting inside your application, together with the list of channels that need to be connected.
Start with using NISE, and see if you like it.
http://www.ni.com/pdf/products/us/3msw112-113.pdf
Srdan Zirojevic -
HI I'm having real trouble opening my word documents (using Office:Mac 2008) Have tried repair disk options as I saw this advice on another blog, seemed to work for a while now its stared happening again. Any help MUCH appreciated
http://answers.microsoft.com/en-us/mac
-
Hi, While writing an email online using Firefox 3.6.3, I was using one of the "CTRL+left or right arrow" to move the cursor along the text. I must have pressed some other key because the display has become huge - and I can't scroll vertically or horizontally, which makes using the Mail pages of Hotmail impossible. I have since logged in using MSFT Explorer and it works fine. This problem occurs only on the Mail page of Hotmail Live not on the home page or others.
Could you please let me know if this is a problem with Firefox, or if you have any advice on how to reset the appearance of Hotmail in Firefox?
== This happened ==
Just once or twice
== While I was compiling an email in Hotmail LiveWow, lightning fast and absolutely right!
Thank you so much! -
Trouble writing Query for Pivoting data from a table
I am having a little trouble writing a query for converting the below table data into a pivot data. I am trying to write a query for which if I give a single valid report_week date as input it should give me the data for that week and also provide two extra columns, one which gives the data of last week for the same countries and the second column which gives the difference of numbers in both the columns(i.e. COUNT - COUNT_LAST_WEEK).
REPORT_WEEK DIVISION COUNT
9/26/2009 country1 81
9/26/2009 country2 97
9/26/2009 country3 12
9/26/2009 country4 26
9/26/2009 country5 101
10/3/2009 country1 85
10/3/2009 country2 98
10/3/2009 country3 10
10/3/2009 country4 24
10/3/2009 country5 101
10/10/2009 country1 84
10/10/2009 country2 98
10/10/2009 country3 10
10/10/2009 country4 25
10/10/2009 country5 102
For example, if I give input as 10/10/2009, the output should be as give below.
REPORT_WEEK DIVISION COUNT COUNT_LAST_WEEK DIFFERENCE
10/10/2009 country1 84 85 -1
10/10/2009 country2 98 98 0
10/10/2009 country3 10 10 0
10/10/2009 country4 25 24 1
10/10/2009 country5 102 101 1
For example, if I give input as 10/3/2009, the output should be as give below.
REPORT_WEEK DIVISION COUNT COUNT_LAST_WEEK DIFFERENCE
10/3/2009 country1 85 81 4
10/3/2009 country2 98 97 1
10/3/2009 country3 10 12 -2
10/3/2009 country4 24 26 -2
10/3/2009 country5 101 101 0
Can anyone please shed some light on Query building for the above scenarios.
Thank you
SKP
Edited by: user11343284 on Oct 10, 2009 7:53 AM
Edited by: user11343284 on Oct 10, 2009 8:28 AMI assume there is no gap in report weeks. If so:
SQL> variable report_week varchar2(10)
SQL> exec :report_week := '10/10/2009'
PL/SQL procedure successfully completed.
with t as (
select to_date('9/26/2009','mm/dd/yyyy') report_week,'country1' division,81 cnt from dual union all
select to_date('9/26/2009','mm/dd/yyyy'),'country2',97 from dual union all
select to_date('9/26/2009','mm/dd/yyyy'),'country3',12 from dual union all
select to_date('9/26/2009','mm/dd/yyyy'),'country4',26 from dual union all
select to_date('9/26/2009','mm/dd/yyyy'),'country5',101 from dual union all
select to_date('10/3/2009','mm/dd/yyyy'),'country1',85 from dual union all
select to_date('10/3/2009','mm/dd/yyyy'),'country2',98 from dual union all
select to_date('10/3/2009','mm/dd/yyyy'),'country3',10 from dual union all
select to_date('10/3/2009','mm/dd/yyyy'),'country4',24 from dual union all
select to_date('10/3/2009','mm/dd/yyyy'),'country5',101 from dual union all
select to_date('10/10/2009','mm/dd/yyyy'),'country1',84 from dual union all
select to_date('10/10/2009','mm/dd/yyyy'),'country2',98 from dual union all
select to_date('10/10/2009','mm/dd/yyyy'),'country3',10 from dual union all
select to_date('10/10/2009','mm/dd/yyyy'),'country4',25 from dual union all
select to_date('10/10/2009','mm/dd/yyyy'),'country5',102 from dual
select max(report_week) report_week,
division,
max(cnt) keep(dense_rank last order by report_week) cnt_this_week,
max(cnt) keep(dense_rank first order by report_week) cnt_last_week,
max(cnt) keep(dense_rank last order by report_week) - max(cnt) keep(dense_rank first order by report_week) difference
from t
where report_week in (to_date(:report_week,'mm/dd/yyyy'),to_date(:report_week,'mm/dd/yyyy') - 7)
group by division
order by division
REPORT_WE DIVISION CNT_THIS_WEEK CNT_LAST_WEEK DIFFERENCE
10-OCT-09 country1 84 85 -1
10-OCT-09 country2 98 98 0
10-OCT-09 country3 10 10 0
10-OCT-09 country4 25 24 1
10-OCT-09 country5 102 101 1
SQL> exec :report_week := '10/3/2009'
PL/SQL procedure successfully completed.
SQL> /
REPORT_WE DIVISION CNT_THIS_WEEK CNT_LAST_WEEK DIFFERENCE
03-OCT-09 country1 85 81 4
03-OCT-09 country2 98 97 1
03-OCT-09 country3 10 12 -2
03-OCT-09 country4 24 26 -2
03-OCT-09 country5 101 101 0
SQL> SY. -
Trouble deploying a J2EE application using the J2EE 6.20 Deploy Tool
I am having trouble deploying a J2EE application using the J2EE 6.20 Deploy Tool.
I successfully create the WAR/EAR files, I then select deploy and the deploy process gets to 100% before displaying an error message.
Can anybody help?
Please see Deploy Tool log entry:
01:39 - **********************************************************
05/01/17 10:19:16 - Applying user role management mappings.
05/01/17 10:19:16 - Start updating EAR-file...D:\SAP_J2EEngine6.20_Cluster\deploying\carmodeller\carmodeller.ear
05/01/17 10:19:27 - Temp files deleted...
05/01/17 10:19:27 - Ear-file updated successfully for 11375ms.
05/01/17 10:19:27 - Start deploying ...
05/01/17 10:20:15 - Ear-file uploaded to server for 47297ms.
05/01/17 10:21:47 - ERROR: ID90506: NOT Deployed. ERROR returned from deploy service :
com.inqmy.services.deploy.container.DeploymentException: Can't init application carmodeller. com.inqmy.services.servlets_jsp.server.WebApplicationException: ID17110: Error in starting application carmodeller.java.lang.NullPointerException
at com.inqmy.services.servlets_jsp.server.ServletsAndJspImpl.deploy(ServletsAndJspImpl.java:482)
at com.inqmy.services.servlets_jsp.server.WebContainer.commitDeploy(WebContainer.java:256)
at com.inqmy.services.deploy.server.DeployServiceImpl.commit(DeployServiceImpl.java:2848)
at com.inqmy.services.deploy.server.DeployServiceImpl.deploy1(DeployServiceImpl.java:512)
at com.inqmy.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:140)
at com.inqmy.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:184)
at com.inqmy.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:157)
at com.inqmy.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:108)
at com.inqmy.core.service.context.container.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:36)
at com.inqmy.core.cluster.impl5.ParserRunner.run(ParserRunner.java:55)
at com.inqmy.core.thread.impl0.ActionObject.run(ActionObject.java:46)
at java.security.AccessController.doPrivileged(Native Method)
at com.inqmy.core.thread.impl0.SingleThread.run(SingleThread.java:153)
05/01/17 10:21:47 - **********************************************************Hi, it looks like the app has trouble starting up:
05/01/17 10:21:47 - ERROR: ID90506: NOT Deployed. ERROR returned from deploy service :
com.inqmy.services.deploy.container.DeploymentException: Can't init application carmodeller. com.inqmy.services.servlets_jsp.server.WebApplicationException: ID17110: Error in starting application carmodeller.java.lang.NullPointerException
Did you have any errors on the compile of the code?
You also want to check if the app is deployed (if so you may want to remove it before re-deploying it) -
Error: The Boot Camp partition "/dev/disk0s3" used by Hard Disk 1 is not supported.
I installed Lion a couple of weeks ago, and had Parallels 5 installed, but it would no longer run. Unfortunately, I spent the money to upgrade to Parallels 6 prior to seeing the advice to get Lion to run with 5. Oh well. But now, it won't run with 6 either. What to do?
Here;s the error again:
The Boot Camp partition "/dev/disk0s3" used by Hard Disk 1 is not supported.You should be able to do this using the Boot Camp Assistant app. There is an option to "Restore the startup disk to a single volume". That should eliminate the Boot Camp partition without harming your Mac OS partition. Even so, make sure you back up your Mac OS X partition data before you do this, just to be safe.
Lance -
Trouble writing large Quicktime file to DVD
I'm having trouble writing a large (2.4G) Quicktime mov. file to DVD. If I burn it as a video it comes out fine, but when I try to write it as a file the end product is jerky and staggered and can't be easily transferred to another computer. I'm wondering if it has anything to do with the size of the file and if there is another way of transferring this file uncompressed, short of carrying my hard drive across town.
The trouble is caused by the speed (data rate) that can be achieved when playing from DVD media via QuickTime Player.
If you burn the DVD as a "data file" you should then copy it (temporarily) to the HD of the viewing machine. Drag the file from the DVD to the Desktop on the viewing machine and then open it with a double click.
When you "burn" it as DVD media you are actually converting the file to MPEG-2 format and the DVD Player can handle these lower data rates.
Does this make sense to you? -
I am having trouble with comcast e mail using safari
I am having trouble with xfinity e mail using browser, SAFARI
I too had this issue. I was recently an employee and user of Comcast and they do not support Safari. Some functions work, many don't. I used Firefox and had no issues. I also set up my mail using MAC MAIL and didn't have any issues with that.
-
I just updated to Pages 5.0 and I am writing a document that uses both, Spanish and English...I used to use the inspector to change spelling and languages. How do I do that in this new version?...HELP!!!
jedimaster Master wrote:
how do I do both?
By choosing SET UP for the "automatic" item at the bottom of the list I referred you to earlier -
I am having trouble logoin when i am using muse to upload ftp host and its saying invalid login or
i am having trouble logoin when i am using muse to upload ftp host and its saying invalid login or password using different hosting provider?
Hi!
I'm having the same problem, and the login and password is 100% correct.
The FTP is propely configured, but Muse are having problem with it. I can login throught a FTP session from a terminal session, and it also works perfectly with FileZilla or another FTP-client.
I have made some traces througth Wireshark, and it's clear the Muse made a sucessful login. But, fter the login Muse sends a request for UTF8 and gets an answer from the FTP-server that UTF8 is always enabled, and there is no need to send this command. Then Muse sends a TCP ACK, and the packet after Muse sends FIN, ACK. See a snip from the trace below...
220-/**********************************************************
220-*
220-* This is the FTP server of ############.
220-*
220-***********************************************************/
220-
220----------------------- Begin Notice ------------------------------
220--
220-- Be aware that all traffic are logged and unauthorized
220-- login attempts will result in permanent banning.
220--
220 ------------------------ End Notice ------------------------------
USER ##########
331 Password required for ##########
PASS ########
230 Logged on
OPTS UTF8 ON
202 UTF8 mode is always enabled. No need to send this command.
Muse -> [ACK]
Muse -> [FIN][ACK]
FTP-Server <- [ACK]
FTP-Server <- [FIN][ACK]
This means that Muse disconnects AFTER a sucessful login, but give the user a faulty message saying "Invalid login or password" and not that Muse has disconnected because of another reason.
Looking forward for an answer.
Best regards
//Leffe
Maybe you are looking for
-
Have to restore before I can use my phone?
I backed-up my iPhone 4 (iOS 5) to my computer using the cord one last time before turning on the Wi-Fi sync option. I then backed it up again using the cloud. Since doing this, iTunes continually tells me that "This computer has previously been sy
-
Does derived table use where clause fillters inside
dear all. Table "A" has two cols aid and col1 , aid is pk. Table "B" has two cols bid , aid , and colb . followin query can be formulated in other ways ,but i wanted to ask something about query processing. select aid,aa.ca,aa.cb from A left join (s
-
As above question. Has never happened before.
-
Libreoffice Crashing on Save again
Several months ago I noticed that there was a bug in which Libreoffice would crash while in the "save as" dialog. I simply waited it out for a while, and then a new version of Libreoffice fixed it. In retrospect, I believe it was the same issue as de
-
Why can't I get my screen back when it goes to sleep?
I Have my 17" Macbook Pro (mid-2011) set to have the screen and backlit keyboard turn off after 15 minutes of inactivity, however at least half the time when I come back to use it again and I hit the trackpad or a random key to "wake it up", the back