Troubles using MIGO TCode

Hi to all!
I'm trying to enter data into the system using <b>MIGO</b>. There I select "goods receipt" and "others". 'Init.entry of stBal.' is being set to 561. In Material , Qty and Wk I set all the required data(Material tab - material, Qty - it's quantity and measure, Wk - plant and storage location). After pressing Enter the line which contains entered data is added to the table. But after pressing "Check" button this message appears:
"<b>Account determination for entry <Ch. of accts. name> GBB ____ BSA 3002 not possible</b>" - Message no. M8 147
what is the problem?
Thanks!

Hi Drabkov
In transaction OMWD, ensure entry of valuation grouping code (may be 0001 or 0002) for your valuation area.
In the error message u received "Account determination for entry <Ch. of accts. name> GBB ____ BSA 3002 not possible", the ____ is the valuation grouping code.
warm regards
sairam akundi

Similar Messages

  • What is the use of tcode mb1c

    hi
    what is the use of tcode mb1c
    pls reply
    thanks in advance

    Hi Ashok,
    The transaction MB1C is used to add the no. of stock to a material.In MIGO transaction you can post all or some of these stock of the material.

  • DMS object link to MIGO tcode - attach to GRN

    Hi,
    Our scenario requires us to link documents with specific GRN number via MIGO tcode. This is a non-std object and the logic
    1.Program two screens for the following module pools for the SAP object that is to be linked additionally:
    u2013 SAPLCV00
    u2013 SAPLCVIN.......
    is not helpful at all and incomplete.
    Could anyone please let know what needs to be done from GRN object side to enable documents to be attacvhed.
    Archivelink is not an option because several documents need to follow life ctycle and versioninG.

    Hello,
    It is a two step process:
    1. Screen activation in SAP DMS
    2. Screen activation in SAP Object
    Please follow below steps:
    1. Configuration of screens as per SAP suggestion & Maintenance of Standard Structure MCDOKOB
    Material document number filed MBLNR need to be included in the standard structure.
    2. For t code MIGO, following function module needs to be maintained - OBJECT_CHECK_MSEG
    3. Maintenance Key Fields
    MSEG MIGO MBLNR MBN
    4. Maintain Object link
    MSEG Material Document Screen Number (enter the screen number which you have configured)
    Use the above created object link in your document type.
    5. Implementation of BADI - MB_MIGO_BADI, this is to activate the sceen of documents in MIGO
    I have not done this. So it is possible that i would have missed some step.
    But I am sure, it will help you a lot.
    Thanks & Regards,
    Mihir Popat

  • Runtime Error SYNTAX_ERROR with MIGO tcode

    Hi Gurus,
    I got a new issue now. while executing MIGO tcode getting SYNTAX_ERROR dump, please check below dump details..
    Category               ABAP Programming Error
    Runtime Errors         SYNTAX_ERROR
    ABAP Program           SAPLVBDOCUBATCH_DM
    Application Component  LO-BM
    Date and Time          09.01.2012 16:27:51
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLMIGO" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
        The following syntax error occurred in program "SAPLVBDOCUBATCH_DM " in include
         "LVBDOCUBATCH_DM$39 " in
        line 8:
        ""RL034" must be a flat structure. You cannot use internal tables, stri"
        "ngs, references, or structures as components."
        The include has been created and last changed by:
        Created by: "SAP "
        Last changed by: "SAP "
        Error in the ABAP Application Program
        The current ABAP program "SAPLMIGO" had to be terminated because it has
        come across a statement that unfortunately cannot be executed.
    Error analysis
        The following syntax error was found in the program SAPLVBDOCUBATCH_DM :
        ""RL034" must be a flat structure. You cannot use internal tables, stri"
        "ngs, references, or structures as components."
    i have tried to check syntax of program SAPLVBDOCUBATCH_DM and it is giving error, please help me solve this issue.
    Additional Information:ECC6.0 EHP5(recently upgraded from ECC6.0) nd DB:Oracle 10.2.0.2 OS:windows
    Thanks,
    Venkat

    Hello Team,
    This is Solved..
    As per dump when we go n check table RL034 through SE11 there one Object type is wrong so with Abaper help it got corrected then the problem was solved.
    Thanks all for your time.
    Venkat

  • How to restrict movement type field in MIGO Tcode

    Hello there,
    I want to restrict the users for 103 movement type through MIGO tcode.
    I have searched for the objects and assigned the value 103 in the movement type field, but it is not solving my problem.
    Is there any other way?
    Thanks in advance.
    Regards,
    Priya.

    If all your users are need to be blocked from using 103 movement type then go to OMJJ@Movement type 103@Allowed transaction@here remove  the assignment of 103 with MIGO
    If you want to do it through authorization then try out with your BASIS person M_BEFU_ALL for all authorizations in Inventory Management
    Regards,
    Indranil

  • Goods Receive for Outbound Delivery Without Reference using MIGO

    Dear Colleague ...
    We might need your insight on the case below related to Goods Receive of Outbound Delivery without Reference using MIGO:
    (1) In the current SAP Enjoy screen of MIGO, we are allowed to select the reference document (e.g. = PO, Material Document, Inbound Document, Outbound Document, etc.)
    (2) We did 3 (three) kind of test set: GR for Inbound Delivery, GR for Outbound Delivery with STO and GR for Outbound Delivery without reference.
    (3) The first 2 (two) cases work just find with MIGO.  We believe it is because the receiving plant is pretty much determined in the reference document, which is PO (case 1) or STO (case 3)
    (4) However, the last case came up with the error message "Goods receipt not possible for delivery 8000610236: error code 5".  We believe that this is the standard design of SAP, that the receiving plant is required and it is not defined explicitly in the delivery document.
    (5) Moreover, we also believe that that's the reason why SAP (via the Logistic Execution module) provide the Handling Unit and Shipment, which can be used to perform such receive function, which will imply the MM posting (goods issue and goods receive) IF there is stock transfer involved.
    Appreciate for any thoughts or input on the above.  Many thanks,
    Alvon Sibarani

    use transaction mb0a it will work for the scenario.

  • Use of tcode file

    what is the use of tcode file????
    what is platform independent file name????

    Platform Independent File path: The actual (Physical) file name/path is always dependent on hardware and OS of the system. Now In this transaction define a Logical name of a file and map it to your specific system specific actual path.
    Now in your coding you can use the logical name. When you use the same come in a different system you need not change the logical name to everywhere you have coded. The Logical name will be same, only in FILE transaction you will change the mapping of Logical File name to actual file path.
    Check the following Link :
    http://help.sap.com/saphelp_erp2005/helpdata/EN/8d/3e4edc462a11d189000000e8323d3a/frameset.htm
    Example:
    Suppose in your application server you created a file and give a logical name as AIRS_PATH. But when you want to access the file you need to know the actual physical path to it. That path may be ‘c:\temp\<FILENAME>’. Now in FILE transaction you mapped AIRS_PATH to c:\temp\<FILENAME>.
    So whenever you try to access AIRS_PATH, the system know that you want to access the c:\temp\<FILENAME>.
    Now may be you want to run your code in a different system and different hardwre. And the file is stored there in ‘c:\temp\temp1\<FILENAME>’ path. So then in that system you need to map AIRS_PATH with ‘c:\temp\temp1\<FILENAME’.
    Now while coding you are not actually familiar or bother the actual file path. You will do your coding based on AIRS_PATH. And that is same in all the system only the mapping need to change. Thus you can achieve the system independence.

  • Return under Warranty (Tracking Line only) Should we use MIGO - Goods Issue

    Return under Warranty (Tracking Line only) Should we use MIGO - Goods Issue when sending out Materials for repair or exchange under Warranty (Free)?

    Please post it in SD/MM forum.

  • McAfee SiteAdvisor is no longer working with my Safari 8.0.  I never had trouble using it with Safari before this latest version.  Has anyone else had this problem?

    McAfee SiteAdvisor is no longer working with my Safari 8.0.  I never had trouble using it with Safari before this latest version.  Has anyone else had this problem?  I contacted McAfee support and they said nobody else is reporting this issue.

    Wow, life is certainly tough for you.
    S***t happens.  That's why there's a warranty.

  • To Update Custom field in mch1 table through MIGO Tcode

    Dear champs,
    I have added one custom field in mch1 table ( date ).
    Now , In MIGO Tcode when i am doing posting, MCH1 table is also updated.
    I want to know how to update my custom field in mch1 table at the time of posting.
    Please tell me where to write logic to update mch1 table.
    Regards,
    Satyen Trivedi

    Hi Satyen,
           what data has to be update in MCH1 table new field, for this did you added any screen or you want to implement your own custom logic.
    1) if you implemented the screen , then you have to write logic there itself.
    2) If you want to update through custom logic , then you takeup with the  Enhancements or BADI.
    Regards,
    Krishna

  • Adding new tab in MIGO Tcode at item leveli

    HI all,
    My requirement is to create a new tab at item level in MIGO Tcode. In that tab I have to add some z-fields, here the point to be noted is these custom fields data needs to be saved into a Z-table along with the goods receipt number which is generated whenever we post the GR. So I searched for screen exits for this. I was not able to found this.
    But I was able to find out a BADI "MB_MIGO_BADI". Is this the right BADI, if so could you let me know in which method I could be able to get the saved GRN number for that posted document. How could I call my custom tab in this BADI.
    If there is any alternate method also, could you please let me know.
    Thanks and regards,
    Srinivas.
    Edited by: Vinod Kumar on Jul 7, 2011 10:30 PM

    Hi gvsastry,
    Thanks for your prompt response, I should save ztable data along with the GRN number which is generated when we post data.
    means if the GR posting fails the Z-table data should not be saved. So is that method which you said, will be triggred after the GR posting itself.
    Regards,
    Srinivas.

  • What is the use of tcode lbwq

    Hi all,
    can u please explain me the use of tcode lbwq in lo-cockpit extractions.
    Thanks in advance.......

    Dear Rakesh,
    Whenever you are working with LO extraction , and if your  Update Mode for Delta is Queued Delta,then all the records that are being changed or created for a particular Application for a successful initialization ,sits in a Queue ( Extraction Queue or Outbound Queue ) in the form of LUW's . These needs to be transferred to the Delta Queue , as the Delta is always accepted by BW only if it passes through the Delta Queue ( RSA7) , for this we schedule a Backgrd job ,which we call as V3 Collective Update Run ,which transfers the records ( LUW's per Datasource ) from Outbound Queue to the Delta Queue .
    Hope it helps.
    Thanks,
    Krish
    *Assigning points is way of saying thanks in SDN

  • What is the use of TCode: OOSE

    Hi,
    Can i know what is the use of TCode: OOSE
    Where i can see a list of entries, let me know what is the use of these option.
    When we would be using it.
    Regards
    Rajesh

    Hi Rafiqh,
    Thanks for your quick response.
    What do you mean by switch, if you can provide me with some example it would be gr8.
    Appreciate your early response.
    Regards
    Rajesh

  • What is the use of Tcode: SM35

    Hi Experts,
    What is the use of Tcode: SM35
    If some one can brief me in detail it would be great help.
    Appreciate your early response.
    Regards
    Rajesh

    Hi Rajesh,
    SM35 is used to run Batch input sessions.
    These sessions can be created via LSMW or any batch-input ABAP program.
    To run a session, select the session and press "Process".
    You can either process foreground (as if you are entering the data), display errors only (runs in background as far as there is no error), background (you need to check the errors when the session is over).
    Regards,
    Dilek
    Edited by: Dilek Ersoz Adak on Dec 16, 2009 4:19 PM

  • What is the use of tcode mrrl

    Dear Experts,
    what is the use of tcode mrrl
    Pls give a solution...
    Kind Regards
    Sajid

    Hi Shaik
    When you want to do the automatic settlement.....using ERS
    you will use the MRRL transaction code to settle the invoice.... it will generate the credit note in background.
    In Automatic settlement you wont receive the Invoice from the vendor....
    REgards
    anand

Maybe you are looking for