Truncate record length with sqlloader?
I'm trying to figure it out, but sqlloader documentation does not mention this...
I'm loading my data from the delimited file, the records are not fixed length, so I can't use "position" instruction. Here is the error:
Record 63: Rejected - Error on table ACCESSTEST, column REFERER
ORA-02359: Field in data file exceeded maximum specified length
Question: how do I tell sqlloader to truncate the record that does not fit?
Thank you in advance!
try using substring within your controlfile
example:
memo CHAR(250) "SUBSTR(:memo,1,250)"
using this substring within your control file, you will only get the first 250 characters of the memo field.
hope this helps.
Similar Messages
-
Fixed record length with GUI_DOWNLOAD
Hi All,
In our current system we set global variables GLOBAL_FIXLEN_* by calling form SET_FIXLEN(SAPLGRAP). This allows us to create ASCII download files using function module WS_DOWNLOAD that have a fixed record length of 160 as required by the bank.
We are now going to a unicode system and WS_DOWNLOAD is being replaced by GUI_DOWNLOAD. How can I continue to create a fixed record length of 160 using this function module? I cannot find any similar GLOBAL_FIXLEN* variables in GUI_DOWNLOAD.
Thanks in advance for suggestions,
KirstenHi,
Kirsten,
I find form "set_trail_blanks" also not available in GUI_DOWNLOAD.
FYI
aRs -
How to load unicode data files with fixed records lengths?
Hi!
To load unicode data files with fixed records lengths (in terms of charachters and not of bytes!) using SQL*Loader manually, I found two ways:
Alternative 1: one record per row
SQL*Loader control file example (without POSITION, since POSITION always refers to bytes!)<br>
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode.dat
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001111112234444
01NormalDExZWEI
02ÄÜÖßêÊûÛxöööö
03ÄÜÖßêÊûÛxöööö
04üüüüüüÖÄxµôÔµ Alternative2: variable length records
LOAD DATA
CHARACTERSET UTF8
LENGTH SEMANTICS CHAR
INFILE unicode_var.dat "VAR 4"
INTO TABLE STG_UNICODE
TRUNCATE
A CHAR(2) ,
B CHAR(6) ,
C CHAR(2) ,
D CHAR(1) ,
E CHAR(4)
) Datafile:
001501NormalDExZWEI002702ÄÜÖßêÊûÛxöööö002604üuüüüüÖÄxµôÔµ Problems
Implementing these two alternatives in OWB, I encounter the following problems:
* How to specify LENGTH SEMANTICS CHAR?
* How to suppress the POSITION definition?
* How to define a flat file with variable length and how to specify the number of bytes containing the length definition?
Or is there another way that can be implemented using OWB?
Any help is appreciated!
Thanks,
Carsten.Hi Carsten
If you need to support the LENGTH SEMANTICS CHAR clause in an external table then one option is to use the unbound external table and capture the access parameters manually. To create an unbound external table you can skip the selection of a base file in the external table wizard. Then when the external table is edited you will get an Access Parameters tab where you can define the parameters. In 11gR2 the File to Oracle external table can also add this clause via an option.
Cheers
David -
Transfer records to UNIX with different record length
Hi all,
I have the following problem. I have to transfer records to a UNIX file. The maximum length of a record is 2000. The records are TAB seperated. I also have records which have a length less then 2000. When i look at the file in Excel the last field is always very large. Isn't there a way to only transfer the real length of the record. I have tried to transfer the record in Binary an Text mode. I used the Length statement, but nothing worked for me.
Hope anyone can help me.
Greetings MaartenHi Maarten,
"Transfer" with "length" option should work. I am not sure what you passed as length to the "transfer" command. Did you used a fixed length of 2000 or did you actually found out the record length of each record and passed that value?
Scenario 1.
Here in this scenario, you will always have the last field set to maximum length.
loop at itab.
transfer itab-record to file length 2000.
endloop.
Scenario 2.
In this second scenario, you should have your excel's last field set to the maximum occupied length of that field.
loop at itab.
v_len = strlen( itab-record ).
transfer itab-record to file length v_len.
endloop.
Hope this helps.
Srinivas -
PXI 5105 - min record length varies with number of initialized channels
Hello everyone,
I'm having a hard time with this issue. Why the record length I acquire with "niScope Multi Fetch Cluster" varies, depending on how many channels I initialize? I.E., I want to fetch 20k data points per channel. If I configure and acquire from 1, 2, 4 or 8 channels, the record length of all signals is 20k points. However, If I configure 3, 5, 6 or 7 channels, the record length is 19934 points. Always 66 points less than the desired value, doesn't metter the configured record length, its always 66 points less. Doesn't metters which channels I initialize, only the amount of channels (it seems to be 2^n). And this is the record length immediately after the data acquisition block. To make things worse, the block "niScope Actual Record Length" returns the desired amount of points, and not the amount I'm actually reading.
Why is this happening?
If this rule is correct, I can figure out a solution.
Best Regards,Hello Giovanno,
Please, to this question,contact the technical support in your country so that engineers will help you.
Thank You.
Rita Souza
Engenharia de Aplicações
National Instruments Brazil -
Writing Datalog Files with record length
How do I write a Datalog File with a record length of 128 int16s?
Each I16 number in LabVIEW that you write uses 2 bytes because 8 bits equals 1 byte. If you write 128 numbers, the file will be 256 bytes long. You can modify the VI to write I32 (4 bytes) or I8 (1 byte) just by changing the representation of the number. You also need to change the subVI that does the actual writing (Write File+ [I16].vi). Be sure to rename the VIs that you change. I would think that your Fortran program would work as long as the data types match.
-
PDF file contains truncated records
Hi ppl,
I have created a report program where I am displaying my data using dynamic internal table concept.
The next part of the requirement is that the output should be converted to PDF and sent as an e-mail attachment to the e-mail ID mentioned on the selection screen.
For this, I am using the below mentioned logic:
1. The program should be executed in background only for spool generation.
2. I am getting the spool ID at runtime and converting the spool in PDF using FM 'CONVERT_ABAPSPOOLJOB_2_PDF'.
3. Sending this PDF via email as an attachment using the FM 'SO_DOCUMENT_SEND_API1'.
The program gets executed without any error; I am even getting e-mails with the PDF document.
But, as my output record size is dynamic in nature, even in the spool, I sometimes don't see the complete record displayed.
So, the PDF file which I receive also shows truncated records.
I need the full record to be seen in the PDF irrespective of the record length.
Please let me know how to resolve this issue.
Regards,
Dawood.Check if changing the line-size parameter in the report statement helps. Else you might have to choose a output type which can hold more number of columns.
report zreport line-size 1023.
Vikranth -
Post Author: anand.kolipakkam
CA Forum: Data Connectivity and SQL
hi all,
I moved Transoft USQL Database from one server to another, even though i am able to validate the server with usql client but my crystal reports is giving errors while trying to open up some of the reports.
Unfortunately doesnt happens for all the reports, it happens for only for the reports which prompts for values in preview screen.
This is the error i get
first error screen....Failed to open a rowset....
second error screen
Failed to open a rowset
Details:HY000:[Transoft][TSODBC][MF](log: 3816-175022)offset and/or length of column exceeds maxium record length of 0
Thats it i get a blank crystal report screen.
I would appreciate if experts would help me out..Don't use localhost as your server name. It's a reserved name and should not be used in code.
Try this also [Kbase |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533353333333433363339%7D.do] SAP Note 1553469 - How to enable Database logging in Crystal Reports for Visual Studio 2010
Edited by: Don Williams on Jan 30, 2011 6:02 AM -
Hi,
running SQL*Loader (Release 8.1.7.2.1) causes an error "SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]". This error occurs when SQLLoader is trying to load several thousand records into a database table. Each record is less than 250 bytes in length.
Any idea what could cause the problem?
Thanks in advance!
Ingo
And here's an extract from the log file generated by SQLLoader :
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 1360 rows, maximum of 10485760 bytes
Continuation: none specified
Path used: Conventional
Table "SYSTEM"."BASICPROFILE$1", loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
UUID FIRST * O(X07) CHARACTER
DOMAINID NEXT * O(X07) CHARACTER
LASTMODIFIED NEXT * O(X07) DATE DD/MM/YYYY HH24:MI:SS
ANNIVERSARY NEXT * O(X07) CHARACTER
BIRTHDAY NEXT * O(X07) CHARACTER
COMPANYNAME NEXT * O(X07) CHARACTER
DESCRIPTION NEXT * O(X07) CHARACTER
FIRSTNAME NEXT * O(X07) CHARACTER
COMPANYNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
FIRSTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
GENDER NEXT * O(X07) CHARACTER
HOBBIES NEXT * O(X07) CHARACTER
HONORIFIC NEXT * O(X07) CHARACTER
JOBTITLE NEXT * O(X07) CHARACTER
KEYWORDS NEXT * O(X07) CHARACTER
LASTNAME NEXT * O(X07) CHARACTER
LASTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
NICKNAME NEXT * O(X07) CHARACTER
PREFERREDLOCALE NEXT * O(X07) CHARACTER
PREFERREDCURRENCY NEXT * O(X07) CHARACTER
PROFESSION NEXT * O(X07) CHARACTER
SECONDLASTNAME NEXT * O(X07) CHARACTER
SECONDNAME NEXT * O(X07) CHARACTER
SUFFIX NEXT * O(X07) CHARACTER
TITLE NEXT * O(X07) CHARACTER
CONFIRMATION NEXT * O(X07) CHARACTER
DEFAULTADDRESSID NEXT * O(X07) CHARACTER
BUSINESSPARTNERNO NEXT * O(X07) CHARACTER
TYPECODE NEXT * O(X07) CHARACTER
OCA NEXT * O(X07) CHARACTER
SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]As a second guess, the terminator changes or goes missing at some point in the data file. If you are running on *NIX, try wc -l data_file_name. This will give a count of the number of lines (delimited by CHR(10) ) that are in the file. If this is not close to the number you expected, then that is your problem.
You could also try gradually working through the data file loading 100 records, then 200, then 300 etc. to see where it starts to fail.
HTH
John -
How to create variable record length target file in SAP BODS
Hi All
I have a requirement to create target file which will have various record layout; meaning different record length (similar to cobol file format), but this is for the target. Please let me know what is the best practice and how to solution this requirment.
Thanks
AshHi Shiva,
Thanks for your feedback. My issue is that I have 10 different detail records (each record type is fixed length).
For each customer account, I have to write to file the header record, the detail records in the exact order, then continue with next account and so on and then write the trailer record. I have given sample layout below. Highlighted text is the record identifier in this exmaple while the underlineds are account numbers. Fields are fixed length right padded with space or 0.
220700000000SA00 Wednesday 2014-12-12 ASA00034 334 000 ---> (this is header)
220700000010SA10 AAb 00000+000000+ Akab xxxx bb 0000000000943 3433 --> (detail rec)
220700000010SA14 AAA 00034354 DDD 000000000+ --> (detail rec)
220700000010SA15 888e a88 00000000+ --> (detail rec)
. . . . . remaining detail records
220700000012SA10 AAb 00000+000000+ Akab xxxx bb 0000000000943 3433 --> (detail rec)
220700000012SA14 AAA 00034354 DDD 000000000+ --> (detail rec)
220700000012SA15 888e a88 00000000+ --> (detail rec)
. . . . . remaining detail records
220700000000SA99 Wednesday 2014-12-12 d334 000 --> (trailer is header) -
Maximum record length in internal table?
Is there a maximum record length in an internal table? Please note: My question is NOT related to table space. I'm referring only to the length of an individual record (A.K.A. row length).
I am using a work area to insert data into an internal table. Both the work area and internal table are defined by the same structure.
The structure has a total length of 672 bytes. For the sake of this discussion I'll point out that at the end of the structure, bytes 669, 670, 671, and 672 are four separate fields of 1 character each.
When viewing the work area record in the debugger I'm seeing all the fields and all the values. When viewing the internal table in the debugger after a record is inserted, the internal table ends with the field defined at Byte 670. The internal table does not include the two fields defined at Bytes 671 and 672.
Am I to assume from the above explanation that the length of a record ( A.K.A. row) in an internal table cannot exceed 670 bytes?
Thank you.Manish,
False alarm! While, technically, you didn't answer my question, your request for code ended up helping me answer my own question.
To provide you with some code I wrote a simple test program using the record layout referred to above, with a DO loop to put some records into the internal table, followed by a LOOP AT, with accompanying WRITE statements to display the contents of the internal table and demonstrate that the last two fields weren't being stored.
However, when I ran the test program, the last two fields were being displayed.
It was at that point, when stepping through the debugger that I noticed the scroll arrows above the last column of my internal table that allowed me to scroll to the right and see my final two fields.
Apparently, because of the large number of fields in my internal table I had reached the default display length of the debugger. While I was obviously aware of the scroll bar found at the bottom of the display, I had never worked with an internal table of that width in the past and hadn't even noticed the scroll arrows above the last column before.
Thanks for taking the time to respond helping me get to the solution. -
Calculating a record length of a table
Hi All,
In SAP 4.6C Oracle 9g I need to find a record length of a table.For that I am using :
Table name is ABC.
Tablespace in KBytes of ABC X
Total no records in ABC Y
Single record length in Kbytes (Z) = Tablespace (X) / Total no of records(Y)
I would like to know weather is this the correct way to calculate in approximation.I would also like to know any other methods of knowing it.
Any inputs are appreciated.
Thanks,
Priya.Hello,
>> I know that after major deletion frm db its necessary to do reorganization to enhance the db utilization.
Not mandatory ... it depends on many factors...
>> Pls help me to understand your statement that freed space isnt used by next entries.
It maybe not used for the next inserts... that depends on your tablespace (if it uses the ASMM feature) and essentially on the following parameters
- PCTUSED
- PCTFREE
Oracle Link: http://download.oracle.com/docs/cd/B28359_01/server.111/b28318/logical.htm
=> The PCTFREE parameter sets the minimum percentage of a data block to be reserved as free space for possible updates to rows that already exist in that block
=> The PCTUSED parameter sets the minimum percentage of a block that can be used for row data plus overhead before new rows are added to the block. After a data block is filled to the limit determined by PCTFREE, Oracle Database considers the block unavailable for the insertion of new rows until the percentage of that block falls beneath the parameter PCTUSED. Until this value is achieved, Oracle Database uses the free space of the data block only for updates to rows already contained in the data block.
Both parameters are used in a NON-ASSM tablespace and with an ASSM tablespace only PCTFREE is used.
Regards
Stefan -
Comma after variable record length
Hi guys,
Can you tell me if it is possible (and how I should have my control file) to process a loader file that has a comma (CSV) after the byte length? I can't get it to work.
e.g
Example file record:-
00047,1,MR SMITH,20 ANY STREET, ANY ADDRESS, ANY TOWN
COLUMNS = "ID,NAME,ADDRESS1,ADDRESS2,ADDRESS3"
So my infile reads
infile 'example.dat' "var 5"
but the only examples I have of using record length is where there is no comma separating the record length from the first field, ie in this format:
000471,MR SMITH,20 ANY STREET, ANY ADDRESS, ANY TOWN
I cant change the input data format, so any help to cater for this is greatly appreciated.
ThanksHello, I think you need to add a FILLER field, like this:
LOAD DATA
INFILE 'example.dat' "VAR 5"
TRUNCATE INTO TABLE t1
FIELDS TERMINATED BY ','
DUMMY FILLER,
ID INTEGER EXTERNAL,
NAME CHAR,
ADDRESS1 CHAR,
ADDRESS2 CHAR,
ADDRESS3 CHAR
) -
Msi tv @nywhere record length?
I'm trying to record a movie that is 1hr and 20 mins in length with the record option in best mode. But when I open the file I get the original movie plus another file with the same movie name plus volume1. so it's splitting the file. I've tried customising the file split size but it's still doing it. records to a max of 3.96gigs then the file splits. Anybody know how to make this stop? Really pissing me off now! Thanks for any help
I think I figured it out. This is the data that shows up when I choose best:
[Real-time Best]
Format: MPEG-2
Audio:
Format: MPEG-1 Layer II
Sampling Rate: 44.1 kHz 16-bit Stereo
Bit Rate: 224 KBits/sec
Video:
Size: 640x480
Frame Rate: 29.97 frames/sec
Bit Rate: 6400 KBits/sec
Total:
Bit Rate: 6883 KBits/sec
File split size : 4063 MBytes.
Total record time : 525 minutes
So it looks like it's just a hardcoded limit in the software. You'll probably just have to join the 2 parts using a video editing package ie premeire(sp) -
OL 5.6 mcelog - warning: record length longer than expected
OS: Oracle Linux 5.6 x86_64 UEK 2.6.32-100 under Virtualbox.
Problem: root mail account filling up with cron messages:
/etc/cron.hourly/mcelog.cron:
mcelog: warning: record length longer than expected. Consider update.
Apparently this issue is still present in OL 5.6 as it was in OL 5.5:
mcelog-error in mail from hourly cron job using Unbreakable Kernel
The following may not be the correct or best way to fix the problem, but it works for me:
rpm -ivh http://public-yum.oracle.com/repo/OracleLinux/OL5/6/base/x86_64/mcelog-0.9pre-1.30.el5.src.rpm
cd /usr/src/redhat/SOURCES/
tar zxvf mcelog-0.9pre.tar.gz
cd mcelog-0.9pre
Test:
/usr/sbin/mcelog --ignorenodev --filter >> /var/log/mcelog
mcelog: warning: record length longer than expected. Consider update.
./mcelog --ignorenodev --filter >> /var/log/mcelog
(quiet)
Implement:
mv /usr/sbin/mcelog /usr/sbin/mcelog.orig
cp /usr/src/redhat/SOURCES/mcelog-0.9pre/mcelog /usr/sbin/mcelogRegards.Username:SQL*Loader-350: Syntax error at line 14.What is line 14 in your script?
Thanks,
Hussein
Maybe you are looking for
-
Manual creation of idoc for a Accounting document FIDCC1
Hi, Some of the config for the change pointer was not moved to production and some accounting documents have been created which have not triggered the IDOC. Is there a way to create the idoc for the accounting documents already created. Regards, Pune
-
My imac keeps having kernel panics - is it the graphics card?
Last few weeks my imac keeps crashing - the screen shows lots of waving lines and then the computer restarts the last report shows: Interval Since Last Panic Report: 94188 sec Panics Since Last Report: 1 Fri Aug 23 17:42:23 2013 panic(cpu 0
-
The interface you are trying to use is related to a logical schema that no
"The interface you are trying to use is related to a logical schema that no longer exists" I'm facing this error when importing a project on Designer connect to a new work repository. I have an TEST Data Integrator environment and now I need to move
-
When I add this code to a new xhtml file and validate for XML I get the following error: Character Encoding mismatch! [XHTML 1.0 Transitional]
-
Why does my ipad4 keep on locking even after only a few seconds?
Ipad 4 keeps on locking while using an app