What does this line of code do: ?xml version="1.0" encoding="windows-1252"?

When I add this code to a new xhtml file and validate for XML I get the following error: Character Encoding mismatch! [XHTML 1.0 Transitional]

Google says: http://www.w3schools.com/xml/xml_encoding.asp
If this is of no help, you'll need to give a little more info - like what did you do, the code, why your using a windows encoding etc.

Similar Messages

?xml version='1.0' encoding= 'windows-1252'?

Jspx opens with a default encoding of windows-1252. Can this jspx webpage be opened on an appl mac machine with the same encoding?
Thank,
Ruchir

Hi,
there is no limitation mentioned
http://en.wikipedia.org/wiki/Windows-1252
However, driving it to a testrun will give you the practical answer
Frank

What is this line of code means???

Hi have a general question, I am not sure if it right place to ask. But I will be grateful if some body could help on this one. I could not figure out what is that line of code (**) is doing or what does it mean. I gave sample implementation here.
Public class Decoder{
InputStream in
Public Decoder(InputStream in){
This.in = in;
String st = somefunction(in)
public static Xval decode(InputStream in){
return new Decoder(in).decode(); **
What I don�t understand that what is line of Code do �return new Decoder(in).decode(); � I have never seen this kind of implementation. The return type is Xval but the function is retrunin t object of this (Decoder) type. And what is Decoder(in).decode() when function decode() is doing nothing except returning a object???
Thank you

Apparently, the Decoder class has a method called decode() that returns a Xval object. The line is equivalent toDecoder d = new Decoder(in);
Xval xv = d.decode();
return xv;

What does this mean error code u44m1i210 elements 13

I bought this over the internet and downloaded. I works but it says it has a update, so I started the update gets all the way through and end it gives me an error. I tried this 4 times. I printed the error code telling me to try again later. The last error code U44M1I210....This Elements 13

Bob,
I am getting eerror 34506 followed by Multiplexing error when I answer OK to the 34506 error.
At what point in the process?
I am loading old VHS tapes into IMovieHD, editing them, then sharing them to IDVD.
Do you have chapter markers? If so:
Make sure no chapter markers are within two seconds of the start or end of the timeline. Make sure no chapter markers are within a transition. Make sure no chapter markers are within two seconds of the end of a transition.
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006

Getting null value while parsing "XML String" with encoding WINDOWS-1252.

Hi,
when I am converting the Follwoing "xml string " to Document, I am getting the "null" as a document value.
    String strXML = "<?xml version="1.0" encoding="WINDOWS-1252"?>
                          <category name="SearchByAttributes" value="Search By Attributes">
                            <item name="ORDER_LINE_ID" description="Application Search Attributes" >
                               <attribute name="Sequence" value="0001"/>
                             </item>
                            </category>"
My "xml string" has the encoding vaule: WINDOWS-1252.
I am using the following code to convert the "xml string" to Document. I am getting the Document values as a "null" while converting the above "string xml"
        String strXML = //my above string xml.
        DocumentBuilderFactory docBuilderFactory = DocumentBuilderFactory.newInstance();
        docBuilderFactory.setIgnoringElementContentWhitespace(true);
        docBuilder = docBuilderFactory.newDocumentBuilder();
        doc = docBuilder.parse(new InputSource(new StringReader(strXML)));
        System.out.println("doc value.."+doc)//I am getting null value for "doc".
Can anyone help me to resolve the issue.

Thagelapally wrote:
I am coverting the below "XML string" to Document, once it is converted I am reading that Document,which have an "attribue" Element in.
String strXML = "<?xml version="1.0" encoding="WINDOWS-1252"?>
<category name="SearchByAttributes" value="Search By Attributes">
<item name="ORDER_LINE_ID" description="Application Search Attributes" >
<attribute name="Sequence" value="0001"/>
</item>
</category>" I am using the above code to read the Document. When run the code in "OC4J Server" and using Jdeveloper as an editor,I am able to perfectly read the "attribute" element in the document with out any problem.Println statement printing as I expected.
System.out.println("Element Name..."+listOfAtt.getNodeName());
//getting Element Name as...."attribute"(as expected)
System.out.println("Element Attibrute list....."+elementAtt);
//getting Element Attribute list as an...."oracle.xml.parser.v2.XMLAttrList@afe"But when run the same code(reading the same Document) in Tomcat and Eclipse,println satatement not printing as i expected.
System.out.println("Element Name..."+listOfAtt.getNodeName());
//getting Element Name as...."#text"(I am expecting output value "attribute" but it is printing "#text" which i don't know)
System.out.println("Element Attibrute list....."+elementAtt);
//getting Element Attribute list as an...."null"(I am expecting output value object reference but it is printing "null"
(without the rest of the code, i'm guessing that) most likely you are grabbing the first child node of the item element. however, you are not accounting for some text nodes that are most likely in that list, like the whitespace between the item element and the attribute element. please go read some tutorials on xml, there are thousands of them out there, and they will answer all you initial questions much more efficiently than posting each step to the forums.

Append messages with out header tag " ?xml version="1.0" encoding="UTF-8"?

Hi all,
I am doing file to file scenario.When I use APPEND in the File adapter it is also adding <?xml version="1.0" encoding="UTF-8" ?>
I need to send a file for every 10 minutes consolidate all files and send at the end of the day.
<?xml version="1.0" encoding="UTF-8" ?>
<ID>31154</ID>
The next time when i send the file with different< ID>31155</ID>
it should append ignoring <?xml version="1.0" encoding="UTF-8" ?>
The consolidated file must look like this...
<?xml version="1.0" encoding="UTF-8" ?>
<ID>31154</ID>
< ID>31155</ID>
Thanks ,
Srinivas

Hey
as pointed out by everyone else,there is no straight way for this,one thing u can do is that create two separate scenarios.
in first scenario use content conversion on receiver side and keep on appending the text for 10 mins (guess this is ur pooling interval),now since ur using FCC u wont get <?xml version="1.0" encoding="UTF-8" ?>,you will get a flat file on receiver side.
after 10 mins u can have one more scenario which picks up this flat file and this time use FCC on sender side so that it will convert this flat file to XML,in this way you will get <?xml version="1.0" encoding="UTF-8" ?> only once.
hope this solves ur problem.
just make sure that you specify correct polling intervals for both the scenarios.
thanx
ahmad

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7
I found the manual update, which worked!
http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604

Hi Barbara,
For failed 13.1.2 update error U44M1P7, Please refer to the solution mentioned in the following threads :
http://forums.adobe.com/message/5396792#5396792
http://forums.adobe.com/message/5409050#5409050

Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2008 iMac which is running 10.6.8. What does this mean?

Why has my monitor suddenly begun to have a moiré pattern all over – it is even showing up on my icons on the dock? It appears to be very thin bright green vertical lines. I have a 2007 iMac which is running 10.6.8. What does this mean? I've attached some screen shots below.
Also experiencing some funky issues with my wireless keyboard. With new batteries, it will just stop functioning. Certain keys intermittently won't work. Also the fans go on as soon as I turn the computer on - some times they stay on and sometimes they don't. Ever since upgrading the operating system - I've been having many issues with this iMac. Not happy. Any answers out there?

Thanks for your reply LexSchellings, There is no disc in the drive and I went through the suggestions you put forward on the phone with Apple support without any luck. I can put a disc in but it pops straight back out again without registering on finder.
The idea of using an external drive was to enable me to avoid the cost and loss of productivity whilst machine in repair... if I have to take it in to get the old drive removed than I might as well have a new internal drive put in, although I do worry about the reliability of these apple drives given my experience with this one coupled with my limited online research ... on line forums seem to be full of people with the same problem (although perhaps searching such forums is bound to make it seem a common problem as users with perfectly working machines are less likely to post (?)) Your reply suggests that no external drive will work whilst the existing drive is in place.
As a postscript: I do realise that this is a user forum ...my secondary question was asking if anyone knows how to put forward a case/complaint to Apple... I can't find a link on the support page that would enable me to do so and I was wondering if anyone on this user forum had any ideas/experience..

I am having a hard drive issue with code 4MEM/6/4000000:6x7a5db418. What does this mean and how do I fix it?

I recently ran the Utility Disk and was verifying the Hard Drive due to some permission issues and found a problem. It told me to run the application startup disk to do another diagnostic which I did. It confirmed there is an issue and gave me the following code = 4MEM/6/4000000:6x7a5db418. What does this code mean and how can I go about fixing the problem? Any wisdom with this would be greatly appreciated. Thanks!

the meanings to those codes are not made public and only Apple certified technicians have access to them.

What does this error mean: Adobe Illustrator CS5 15.0.2 Update There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207

When I click on the adobe installer icon to update my products, I get this message:
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later. Error Code: U43M1D207
What does this mean and how do I solve it?

See if the following helps:
Error downloading, installing, or updating Creative Cloud applications

Latest IOS displays fault code 1671, what does this mean?

latest IOS displays fault code 1671, what does this mean?

If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

I am trying to redeem my iTunes account with a gift card and it keeps coming up with "the Gift certificate or prepaid card code you entered has not been properly activated. Please contact iTunes customer support for assistance" what does this mean?

I am trying to redeem my iTunes account with a gift card and it keeps coming up with "the Gift certificate or prepaid card code you entered has not been properly activated. Please contact iTunes customer support for assistance" what does this mean?

It all comes down to contact iTunes customer support for assistance.
iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html > Get iTunes support via Express Lane > iTunes > iTunes Store

I keep getting an error code while trying to import a cd to my itunes: Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space. What does this mean?

I keep getting this error code while trying to import a cd to my itunes: "Error occurred while converting the file. The disc you are attempting to use is full. removing files and emptying the recycle bin will free up additional space." What does this mean?

Well it probably means exactly what it says... How much free space is there on your hard drive where the iTunes Media folder resides? I believe there is also an obscure bug that can occur when software doesn't read the true value of the free space properly, and the workaround is, perversely, to duplicate some content so that with less actual free space the software in question perceives it as more. I've no idea if iTunes is affected by such a bug.
tt2

What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

What does this mean and how do I fix it? Error ITMS-9000 "Invalid Code Signing The executable ´viwer.app/ viewer´ must be signed with the certificate that is contained in the provisioning profile"

If you had Firefox save your Yahoo password, first try deleting that here:
orange Firefox button ''or'' classic Tools menu > Options > Security > "Saved Passwords"
The "signed out" message seems to be related to how Yahoo authenticates you. Some users have reported that disabling automatic proxy detection solves the problem, and it also resolves an issue of getting logged out every few minutes, if you have ever experienced that.
To make the change:
orange Firefox button ''or'' classic Tools menu > Options > Advanced
On the "Network" mini-tab, click the "Settings" button, then choose "No Proxy" and OK your way back out.
If your work connection requires you to use a proxy server, try the "Use system settings" option instead.
Does that help?

I have just tried to sync my iphone. Error message saying it cannot be synced has popped up quoting error code (-50). I have just removed old iphone backups from itunes but was very careful to not delete the current one. What does this code mean?

Hi there,
I have just tried to sync my iphone.
Worryingly an error message saying it cannot be synced has popped up quoting error code (-50)
I have just removed old iphone backups from itunes but was very careful to not delete the current one
What does this code mean?

http://support.apple.com/kb/TS1583

What does this line of code do: ?xml version="1.0" encoding="windows-1252"?

Similar Messages

Maybe you are looking for