Truncate / Trim and Convert the values while importing in Import Manager

Hi,
I am facing the following issues while importing the values in Import Manager.
1) The incoming value is a 4 character text value (e.g. D004) and i need to truncate the 1st two characters so that i get the output as "04" and map it to the destination numeric 2 character field.
Can any1 help me on this as to how can i truncate the 1st two characters?
2) My incoming value is a numeric field which is coming from ECC. this value can be negative as well. the ECC sends this value as (78.00-) ie the minus sign is suffixed to the value but in MDM i need it as (-78.00) ie minus sign prefixed to the value.
Is there any setting in Import manager where i can set the minus sign as a prefix?
Useful answers will be rewarded with points.
Regards,
Roshani

Hi Roshani,
Can any1 help me on this as to how can i truncate the 1st two characters?
As suggested by everyone, none of these options will work. Since your field has alphanumeric Value i.e. D004. Use Option Replace.
After mapping your source field with target field which must be of Type TEXT, Right click on your source field>Set Value Conversion filter>Replace..-->a pop up window will come Replace write Find What: D0 and Replace with: keep it blank(dont write anything) and then Press Ok, you will see all your Source values D0XX converted to XX and then can save in Import Map which will give you the desired result.
If you set your target field of type INTEGER, you cant have option Replace. And the TRUNCATE option as suggested by everyone will not work as Operand 2: you can set as Numeric values only, you would not able to write D.
Is there any setting in Import manager where i can set the minus sign as a prefix?
I dont think this is possible alone with Import Manager, you need MDM workflow for this where your workflow trigger action = Record Import in Data Manager, and need to select the same workflow in configuration options of Import Manager>Import>checkout/workflow = select the workflow name from drop-down which you set in Data Manager and then need to save this in your Import Map. So in this manner whenever record comes through import Manager, these records automatically will go through this Workflow and will give you the desired result.
START(CHECKOUT)>Assign>STOP(CHECKIN)
Assign step where you give assignment on this field and write assignment expression as:
IF(FIND(XXX, "-"), "-"&LEFT(XXX, (LEN(XXX)-1)), XXX)
where XXX = Field name which you defined in MDM repository.
Regards,
Mandeep Saini

Similar Messages

InDesign CS6 crashes all the time while importing an image

InDesign CS6 crashes all the time while importing an image. Does anybody knows what's going on? How can I solve this problem. Please help me cause I can't work. Thanks a lot!

AlgoritmoMX schrieb:
Thanks a lot for your quick response. I convert images to CMYK because it is best for me to see the final colors in screen when working in Photoshop. As you know, some colors (like green) have a lot of problems in rendering quite accurate when you work in RGB and then convert to CMYK (greens tend to look very vivid in RGB and then very pale and lack of contrast when converted to CMYK). In doing so, it's not reliable for me to work in RGB and then convert to CMYK in RIP or in PDF export. When working in Photoshop, you have a more precise control of color when images are in CMYK, although we all know that the respresentation of CMYK on screen is just that, a merely representation of what it sholud look a CMYK image on screen (because screen works with RGB as you know).
Also, my question and concern is that ID should let you paste images in CMYK and tiff format also (not only PSD) , so what's the point in having those features if they are not going to work at all?
This problem never happened to me in earlier versions of ID.
Thanks a lot again!
That is not true at all. You can turn on in Photoshop the CMYK proof preview which would look exactly the same as if you have converted the image to CMYK. A CMYK proof print from a RGB file with a profile has exactly the same output as if the file has been converted to CMYK under the same settings. Even if you have CMYK images, you see only a back converted RGB image on screen! This is a simulation and it is exactly the same simulation as if you would turn on the CMYK preview of a RGB image! You can see even the plates of a CMYK image.
A CMYK file has a size from 133% of the same file in RGB! So you have shuffle around in CMYK with more data than you would do with RGB images. InDesign is supposed to handle RGB images for print since version 2.0 and since CS (Version 3) it is working without problems. And it can do it better due to smaller file sizes than with CMYK! Try it and you will be astonished how much time and work you have wasted useless in converting images to CMYK.
Have a look to this discussion: http://forums.adobe.com/thread/753454
Other actions you might take is to resave the tiff image without any compression or with a different compression to force Photoshop to write the file completely new.

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.

I am trying to build a basic TCL skeleton script that reads a remote SNMP OID and displays the value on the screen.
I don't want it to be an EEM Event, I just want to run it from the (tcl)# prompt.
So I guess I'm asking if you can use cli_exec and other commands in the "namespace import ::cisco::eem::*" in a normal non-EEM script - can I do that?
This is the error I get:
OTN.159(tcl)#source flash:TCL_SNMP_Remote_Read.tcl
invalid command name "::cisco::eem::event_register_none"             ^
% Invalid input detected at '^' marker.
What am I missing?
================= TCL_SNMP_Remote_Read.tcl ==============================
::cisco::eem::event_register_none
namespace import ::cisco::eem::*
namespace import ::cisco::lib::*
if [catch {cli_open} RESULT]
    { error $RESULT $errorInfo }
    else { array set cli1 $RESULT }
if [catch {cli_exec $cli1(fd) "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0" } RESULT]
       { error $RESULT $errorInfo }
       else { set SnmpSysDesc $RESULT }
if [catch {cli_close $cli1(fd) $cli1(tty_id)} RESULT] {
            error $RESULT $errorInfo
puts $SnmpSysDesc
=========================================================================
In the sho-run config I have:
event manager directory user policy "flash:/"
event manager session cli username "cisco"
Any help to get me started would be greatly appreciated!
Tim

If you don't want an EEM policy, then don't use any of the EEM constructs. Instead, all you need is this:
set output [exec "snmp get v2c 192.168.1.100 public timeout 1 oid 1.3.6.1.2.1.1.1.0"]puts $output

UDF for reading a particular line and storing the value in a variable

Hi Experts,
I am reading entire file content in single feild in source data type.I want to write a UDF to seach for a particular pattern(say :25: and store the value after it i.e 34535764778 detination for further use).
EX: My sample file and its has feilds like
point assured
Thanks

Hi since u are using a single field only then u dont need to use any advanced function
Wel because if u see the formation of the queue u wil find the the whole data is under one context.. and there are not more context changes
Convert the string to an array and progressively u can check for the four checks if the a<i>=:
then a[i+]=2 then a[i]=5 and a[i+] =: and then substring the next 7-8 chrac.. hope u understand
If this also doesnt work wel then u will have to use the Pattern class in Java
By the way remember that the substring value cant be retained for the next instance of mapping
Hope u have that in mind...
Rgds
Aditya

Check the values while saving the values in SM30

Hi all,
I have created a Table maintennace for a ztable in SM30.
I want to check the values while saving the values in the SM30.
Can aynbody please give any idea how can i acieve this.
Thanks,
Tarangini

Hi Tarangini,
Go to the Table Maintenence Generator screen in Change mode. from this Screen go to the
Enviorment->Modifications->Events.
New screen will open and click on the New Entries button.
then from the F4 Help of the first column, select ur appropriate Event and in the second column give the name of the Subroutine.
and from the Third column u can do the coding for the subroutine as shown below.
FORM BEFORE_DATA_SAVE.
IF SY-UNAME EQ 'USER1' OR SY-UNAME EQ 'USER2'.
ELSE.
message 'No Authorization for Change...' type 'E'.
ENDIF.
ENDFORM.
Regards
Jagesh

How do I click on a cell in a table control, and display the value in a string?

What I would like to do is to click on a cell in a table control, and have the value of the cell be displayed in a string indicator. What ever cell I click on, I would like the value to be displayed in the indicator.
Thank you!
Solved!
Go to Solution.

... or
Event >>> ouse down for table.
Use Coords" to feed invoke node "point To Row Column" and returned "Cell Postion" can be unbundled to produce the row and column tht can be used to index out the value.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Bind Variable in SELECT statement and get the value in PL/SQL block

Hi All,
I would like pass bind variable in SELECT statement and get the value of the column in Dynamic SQL
Please seee below
I want to get the below value
Expected result:
select distinct empno ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT' and pr.empno =100
100, HR
select distinct ename ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT' and pr.empno =100
TEST, HR
select distinct loc ,pr.dept   from emp pr, dept ps where   ps.dept like '%IT' and pr.empno =100
NYC, HR
Using the below block I am getting column names only not the value of the column. I need to pass that value(TEST,NYC..) into l_col_val variable
Please suggest
----- TABLE LIST
CREATE TABLE EMP(
EMPNO NUMBER,
ENAME VARCHAR2(255),
DEPT VARCHAR2(255),
LOC    VARCHAR2(255)
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (100,'TEST','HR','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (200,'TEST1','IT','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (300,'TEST2','MR','NYC');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (400,'TEST3','HR','DTR');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (500,'TEST4','HR','DAL');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (600,'TEST5','IT','ATL');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (700,'TEST6','IT','BOS');
INSERT INTO EMP (EMPNO,ENAME,DEPT,LOC) VALUES (800,'TEST7','HR','NYC');
COMMIT;
CREATE TABLE COLUMNAMES(
COLUMNAME VARCHAR2(255)
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('EMPNO');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('ENAME');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('DEPT');
INSERT INTO COLUMNAMES(COLUMNAME) VALUES ('LOC');
COMMIT;
CREATE TABLE DEPT(
DEPT VARCHAR2(255),
DNAME VARCHAR2(255)
INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('HR','HUMAN RESOURCE');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('MR','MARKETING');
INSERT INTO DEPT(DEPT,DNAME) VALUES ('IT','INFORMATION TECH');
COMMIT;
PL/SQL BLOCK
DECLARE
TYPE EMPCurTyp IS REF CURSOR;
v_EMP_cursor    EMPCurTyp;
l_col_val           EMP.ENAME%type;
l_ENAME_val       EMP.ENAME%type;
l_col_ddl varchar2(4000);
l_col_name varchar2(60);
l_tab_name varchar2(60);
l_empno number ;
b_l_col_name VARCHAR2(255);
b_l_empno NUMBER;
begin
for rec00 in (
select EMPNO aa from EMP
loop
l_empno := rec00.aa;
for rec in (select COLUMNAME as column_name from columnames
loop
l_col_name := rec.column_name;
begin
l_col_val :=null;
   l_col_ddl := 'select distinct :b_l_col_name ,pr.dept ' ||' from emp pr, dept ps where   ps.dept like ''%IT'' '||' and pr.empno =:b_l_empno';
   dbms_output.put_line('DDL ...'||l_col_ddl);
   OPEN v_EMP_cursor FOR l_col_ddl USING l_col_name, l_empno;
LOOP
    l_col_val :=null;
    FETCH v_EMP_cursor INTO l_col_val,l_ename_val;
    EXIT WHEN v_EMP_cursor%NOTFOUND;
      dbms_output.put_line('l_col_name='||l_col_name ||' empno ='||l_empno);
   END LOOP;
CLOSE v_EMP_cursor;
END;
END LOOP;
END LOOP;
END;

user1758353 wrote:
Thanks Billy, Would you be able to suggest any other faster method to load the data into table. Thanks,
As Mark responded - it all depends on the actual data to load, structure and source/origin. On my busiest database, I am loading on average 30,000 rows every second from data in external files.
However, the data structures are just that - structured. Logical.
Having a data structure with 100's of fields (columns in a SQL table), raise all kinds of questions about how sane that structure is, and what impact it will have on a physical data model implementation.
There is a gross misunderstanding by many when it comes to performance and scalability. The prime factor that determines performance is not how well you code, what tools/language you use, the h/w your c ode runs on, or anything like that. The prime factor that determines perform is the design of the data model - as it determines the complexity/ease to use the data model, and the amount of I/O (the slowest of all db operations) needed to effectively use the data model.

How to read and update the value of property file

Hi,
I am not able read the values from property file.
Please tell me how to read and update the values from property file using Properties class
This is my property file : - Config.properties its located in D:\newfolder
Values
SMTP = localhost
Now i need to change the value of the SMTP
New value :
SMTP =10.60.1.9
Pls Help me
Thanks
Merlin Rosina,

Post a small (<1 page) example program that forum members can copy and run that demonstrates your problem.

I have LR from 2 through 4.4, I am simply trying to adjust CR2s, and convert the them JPEG. LR says my Perfectly Clear is expired but my update is up to date and all paid for. What is Perfectly Clear and how do i get this puppy to be part of the team?

i have LR from 2 through 4.4, I am simply trying to adjust CR2s, and convert the them JPEG. LR says my Perfectly Clear is expired but my update is up to date and all paid for. What is Perfectly Clear and how do i get this puppy to be part of the team?

Perfectly Clear is a 3rd party commercial plugin for Lightroom.
http://www.athentech.com/products/plugins/
Have you ever installed it as a trial in the past?

Call RFC from ECC and display the values in AET

Hi ALL,
I had an RFC in ECC ( Z_CRM_SPEC_DATA) this should be called into my AET Fields in getter method.
In getter method of tat AET field what code should i write?
Plz help me on this.

HI,
1) Call the RFC(Z_CRM_SPEC_DATA) from ECC and display the values as mentioned in below AET fields.
AET FIELDS :    zzfld00000M    zzfld00000N
Description :    Budget Quan    Forecast Quan
values         :    (--5.0)(6.0--
2) (Fetch Budget and Forecast data from ECC ),you would need to pass Material Number(MATNR) as well as Ship to party info to fetch the budget and forecast data as one material may be assigned to 2 or more SH with specific budget and forecast data for each.
Edited by: venkatabharathv on May 23, 2011 2:44 PM
Edited by: venkatabharathv on May 23, 2011 2:49 PM

SUBMIT and return the value of that report into internal table

Dear all,
I have a requirement. I want to submit a report and return the value of that report into my internal table.
How to do this.
Pl. guide.

Hi Vidhya,
Below links from SAP help will resolve your issue.
http://help.sap.com/saphelp_nw04/Helpdata/EN/fc/eb3bde358411d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3bd1358411d1829f0000e829fbfe/content.htm
Edited by: Harsh Bhalla on Jan 2, 2010 11:54 AM

How can i copy and referencing the value of a sub-total of a category into another cell?

How can i copy and referencing the value of a sub-total of a category into another cell?

Cells in Category rows 'exist' only when those categories are inserted using the Reorganize table. Those cells cannot be referenced from other cells.
If you want a category summed, you will need to do that in a cell that is still visible when the table is not sorted into categorie using the Reorganize pane. The function to use is SUMIF. You can find information regarding SUMIF (and SUMIFS) in the iWork Formulas and Functions User Gude. The guide may be downloaded using the link in the Help menu in Numbers '09.
Regards,
Barry

How to retrieve the procedure value and pass the value to a form field

How to retrieve the procedure value and pass the value to a form field?

Set property for the field and the value is the actual procedure/function.
Cheers

How to update and use the values of variables of another class

I can we update or use the values of the variables of another class. For example, if we have class A
public class A //(situated in package view)
public s0,s1;
public void runFunction()
...some coding and proceedings
s0="Hi";s1"Hello";
......some coding
RequestDispatcher dispatcher = request.getRequestDispatcher("/MainUser.jsp?alert=F");
dispatcher.forward(request, response);
ARunner.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
a.runFunction();
%>
MainUser.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
System.out.println("S0:"+a.s0+" S1:"+a.s1); //should print S0:Hi S1:Hello, but printing S0:null S1:null
%>
A.class has some procedures and String variables which can be updated and later can be used in JSP pages. The project starts with ARunner.jsp which uses the A.class and updates the values of string variables s0 and s1of A to hi and hello respectively.And then redirects the page to MainUser.jsp.
Now what I want is ,when I call those string variables(s0 & s1 of A.class) in any another jsp likeMainUser.jsp it should give me the value of hi and hello respectively not null as it is giving right now. Could you refine the coding for this one?

public class A //(situated in package view)
public String s0,s1;
public void runFunction()
...some coding and proceedings
s0="Hi";s1"Hello";
......some coding
RequestDispatcher dispatcher = request.getRequestDispatcher("/MainUser.jsp");
dispatcher.forward(request, response);
ARunner.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
a.runFunction();
%>
MainUser.jsp
<jsp:useBean id="a" class="view.A" scope="session"/>
<%
System.out.println("S0:"+a.s0+" S1:"+a.s1); //should print S0:Hi S1:Hello, but printing S0:null S1:null
%>
giving code again to remove the typing errors. Please guide.

Mutator to compute set and return the value

Hi
I am having trouble working out how to do a mutator that does all three
compute a value set the value and then return it this is what i have so far
this example calculates and returns the value but does it set the value of totalSlices ???? this is the best option so far
public int totalSlices (){
int total = meatSlices + vegSlices;
return (int) total;
this one seems more likely to me but unsure is this a set method as well
public insert (int fiveC)
fiveCentCoin += fiveC;
returne fiveCentCoin;
this is the final example i have come up with but dont know if it sets the value as well
public int calculateCost () {
double cost;
if (age==0) {
age = 0.1;
if (neutered) {
cost = (100/age) + (stay * 3) + SHOTS + TAGS;
} else {
cost = (100/age) + (stay * 3) + SHOTS + TAGS + NEUTER;
return (int) Math.round (cost);
the problem i face i am not sure of how to combine a mutator calculation, set method and return it all in one i havnt done that before and cannot find an example
thanks

I think you're trying to take a hollistic approach to programming. That won't work.
You need to go back and get a good understanding of exactly what each element of Java does.
Sylvia.

Truncate / Trim and Convert the values while importing in Import Manager

Similar Messages

Maybe you are looking for