Try to use recovery disk i made but it ask for disk 3 and there isnt one
My computer crash and when I try to use the recovery disk that i made form the system, it said it only took 2 dvds i burn the disk. then when my computer crash i try using the disk and all want good until disk 2 was done and it ask for the next disk i didnt change the hard drive or any other hardware. i had to send it back to toshiba for them to redo it. when i try order a set of disk Toshiba said they no longer carried the disk. its a new computer with window 8 model number s875-s7356 what happens next time its crash it cost me 60 to have them do something i should be able to do myself when you buy a computer new it comes with OEM windows and has a key number for that windows so why should i have to buy windows 8 when i paid for it when i paid for the computer is there a way to order a disk from MS that will work with the key the computer came with
The recovery image is probably closer to 12 gig in size than the 9 gig you can get on 2 disks. Get a 16 gig USB thumb drive and make your recovery on it. It's easier because there is no disk switching. I'd do it as soon as you get your computer back.
L875D-S7232 (Win 8.1)
Similar Messages
-
Been using an ipad 2 without passcode for quite some time. While upgrading to ios 7, I enabled Find Iphone on the Ipad. It asked for passcode and I gave one. Now I forgot it. Connected it iTunes (on my windows 8 system) with which I sync and that too required an update as old version of itunes cannot read ios7. Problem is itunes does not want to get updated. Some vague error on not having right to write a file in ProgramData folder wheras as an admin i have full rights. Next I downloaded the install file from itunes site - no luck it would not install. Then I tried to remove itunes - it does not want to go. Am at wits end... Is the option only to restore it as a new Ipad?
Place the iPhone into recovery mode and restore the iPhone with iTunes on your computer.
http://support.apple.com/kb/HT1808 -
how do i migrate files from a imac to macbook pro using an ethernet cable. the migration program asks for firewire and i don't own a fireWire. I do own an ethernet cable though
A FW cable would be far faster & Easier, but with Ethernet you need a compatible version of Migration Assistant running on both Macs.
-
I just got the 5s, every time in try to update my apps it's asking for a second password to an Apple ID that is not mine-- it asks for mine and then another one pops up after I enter mine .what do I do?
where did you get this phone from
-
Using my current ID and password I can sign in to Adobe. When I try to download the upgrade to Flash Player they ask for my ID and Password. When I insert my current ID and password it is rejected. How do I correct this problem? Is it an incorrect sign in from an old ID, and/or an old password associated with Flash Player?
The password prompt is supplied by the operating system, and is intended to protect you from accidentally installing software. You will get this prompt for any installation outside the App Store context.
If you do not need to enter a username or password when starting your computer, you can probably just leave the password field blank when acknowledging this prompt. -
i've just redeemed a $50 iTunes card. Credit shown on account is correct but when i try to make purchases it asks for my user name and password even tho i'm already signed in and it sends me back to the redeem page. please help!
The amount is already credited to your account. Purchase something and it will use this balance.
-
I have AirPrint on my Ipad...when I try to print, a box opens and wants username and password. HELP!!
What is the content of the target field of that shortcut if you open the properties via the right-click context menu?
-
I have buy 4s it's unlocked and its working ok with different carriers in Bahrain, but in Pakistan I try to use different carriers's sims but its showing sim is not valid , not compatible? any one please help me out this?
Try restoring the iPhone to factory settings. If you are having difficult restoring, put the iPhone into Recovery Mode and see if that then works:
http://support.apple.com/kb/ht1808
If not, or if a restore to factory settings does not fix the problem, then your iPhone may have a hardware problem. You can only get the iPhone serviced by Apple in Canada, so you will have to take the iPhone there or send it to someone you know in Canada who can get the iPhone serviced and send it back to you. The only option for getting service in Pakistan would be to pay some unauthorized repair shop to attempt a repair, after which Apple will no longer provide any service even in Canada.
Regards. -
I just changed my user name to my e-mail address on my iMac. It works fine there but when I try to use my iPhone it still shows my old user name and will not let me enter??
There is no user name needed to "enter" or use iPhones...
Assuming you mean your iTunes Store account ID:
Settings > Store > tap ID > sign out > sign in with new ID -
Well my sister lives in US and she just handed me her old iphone 3gs. The phone was locked to AT&T .While trying to acees it an error message is popping up that Iphone is disable,Please connect to itunes.Well i downloaded a new version of itunes and while connecting it in recovery mode and tryuing to update it it is giving an error.i asked my sister to unlock the phone so i could use it on any network .she has applied for it and will get the code in one week. What should i do?? Please help.
Restore the device as new with an AT&T SIM card or wait until it is unlocked and restore as new with another carriers SIM.
-
I changed my email address for my apple id but icloud still has old email adress and when I try to signout so I can sign in with new address it asks for password and then says invalid so I cannot delete the account to sign in with the new one! Please help
OK...now I appear to 'progressed' I changed my email address back to original on Apple id and then was able to delete icloud account. Apparently I couldnt do it as it kept requesting password when I entered passsword ( both old and new one, it wouldnt accept it as it had my old email address in ) It didnt do that on ios6 . Anyway I deleted account, but now I tried to login in with my new id/password and it says unable as already in use!!! More help needed please! Its a nightmare!!
-
Installing Photoshop CS4 from original Disk onto my new Macbook Pro. Serial number accepted but now asks for the serial number of a previous version e.g. CS3 which I no longer keep. How do I resolve ?
Tina Hadley did you migrate/transfer your applications over to your new Macintosh? If so this could cause problems with your serial number being recognized. Please run the available uninstallers located in Applications/Utilities/Adobe Installers folder. Once this is done you will also want to run the CC Cleaner Tool. Details on the use of the CC Cleaner Tool can be found at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
-
Firefox 3.6.8 and 3.5 (I downgraded to see if that would solve the issue)
Windows 7
Intel Core i5
Flash Player: WIN 10,1,53,64
When using Firefox certain videos play but the image is green and distorted. The image turns into lines and sometimes it half of the screen of the video. Examples are streaming MLB.tv video and some vimeo videos. The odd thing is that it isn’t all Vimeo videos. Is this a flash issue?
The issue does not happen with Internet Explorer which leads me to believe this is an issue with Firefox. I downgraded to 3.5 and the issue still persists.
Screen Caps: http://yfrog.com/1x46496103j and http://yfrog.com/n112309689j
Any help?
== URL of affected sites ==
http://Try disabling hardware acceleration in your [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash settings] (using Firefox, right-click on any Flash object on a webpage, select Settings, uncheck "Enable hardware acceleration on the Display tab).
Ref:
http://kb.mozillazine.org/Flash#Performance_or_display_issues_with_certain_Flash_videos -
I tried to use Apple Pay at the 1280 Lexington Ave store in NY but was asked for the last 4 digits of my cardnumber and it never worked. The question itself made no sense but I tried in vain by supplying it as well as the security code. I didn't know the last 4 of my proxy card number.
Open Passbook, select the credit card you are using, touch the Info icon on the lower right. This will display the last four digits of the ‘Device Account Number’. These four digits are what your retailer wants to complete the transaction, NOT the last four digits of your card number. Some retailers require this, others do not.
-
I buy adobe creative suite for teachers and students about one year ago but now i'm not longer a student. Can I still use this programs legally for commercial purposes or do I have to buy some upgrades or something like this? Please help
The license did not have use restrictions Licenses and terms of use | Adobe
BUT... when your one year Education account ends, I do not think you will be able to renew at the Education rate
Maybe you are looking for
-
Add Two Column in report ,Download and Delete
Hi Friends, i have one item File Browser to use browse :P1_file_browser and i have create a Report My Table Is CREATE TABLE "ARM_DOC_CER" ( "ID" NUMBER, "NAME" VARCHAR2(500), "MIME_TYPE" CLOB, "BLOB_CONTENT" BLOB, "SUBJECT
-
Exchange rate difference in f-03
Hi all pl. help me. I am not able to clear open item in f-03 which is maintained in BRL. I am posting payment in usd. the error reads: Ex.rate diff.accts are incomplete Diagnosis The accounts for posting exchange rate differences could not be determ
-
How do I get PSE 8 to open just one file, not previous ones?
I just reinstalled PSE 8 (which I prefer to PSE 10) on my new iMac (using Lion 10.4.7; the previous iMac used Leopard 10.5.8) and when I click on a file in a folder or from Bridge to open it in PSE 8, the previous files I worked on also open. I can e
-
ORA-15032 when mounting a diskgroup in a remote node
Hi all, Oracle 10g R2 (10.2.0.4) Windows 2003 SP2 Server I successfully went through the steps of creating an Oracle RAC of two nodes rac1 and rac2 till I reached to creating ASM step. To create an ASM, I issused dbca from rac1 and created an ASM ins
-
Dear forum, I have a compaq laptop. With a HP DVDRAM GT50N ATA Device as DVD burner. But all the time i get an error. The error code is 0xc0aa0301 . I have followed this tutorial but i doesn't work . Can anybody help? Greetings.