Trying to Add "search" to Form

In JDev 10.1.2, I have a JSP with a read-only form that has the navigation buttons at the bottom ('First-Next-Previous-Last') and an LOV at the top that also controls which record I am viewing. I have been trying to add the capability to search on the same page for people that know the record they want so they don't have to scroll through 500+ ID numbers in the LOV.
I've tried adding a textbox & button, but the only thing I can get it to do is change the number that is visible in the LOV for that particular record. If I navigate using the LOV, it automatically puts the correct number in the textbox as it changes the record. It just doesn't work the other way.
I'm (pretty) sure that this is possible, but I haven't seen examples of it and haven't been able to figure it out for myself. Any advice?

re-post

Similar Messages

Ora-92101 when add a new form

Dear all,
I am using oracle application server 10.1.2.0.2 and database 9.2.0.7.0
An ora-92101 error appeared when I tried to add a new form to the existing application with buttons that generate reports
would you help me please to solve this problem
regards,

I would check the source for the form as that appears to be programmer defined and not an error defined by Oracle.
http://download.oracle.com/docs/cd/E11882_01/server.112/e17766/toc.htm
I think user defined should be in the range -20000 .. -20999.
Your error is too similar to this FRM error for me not to post this:
Master Note For Known Causes of FRM-92101 Error In Forms [ID 604633.1]
Best Regards
mseberg
Thanks for the additional information.
Edited by: mseberg on Mar 10, 2011 11:51 AM

Error while trying to add a new field in search criteria by VO extension

Hi,
I am trying to add a new field by using the VO extension to a seeded OAF page used to search Repository contracts.
I get the following error on opening the page after I have compiled my code on server and bounced apache.
Message not found. Application: FND, Message Name: FND_VIEWOBJECT_NOT_FOUND. Tokens: VONAME =SSPN_AdvancedSearchAttributesPVO; APPLICATION_MODULE = oracle.apps.okc.repository.search.server.ContractsAdvSearchAM;
I extended the AM also after this to include the extended VO but still the error comes.
This page is a dynamic search page where the results change based on the different search criteria.
Cheers
Swati

Hi,
I extended the AM also after this to include the extended VO but still the error comes.There is no need to extend the AM for extending a VO. Hopefully the VO which u extending already attached to the AM oracle.apps.okc.repository.search.server.ContractsAdvSearchAM.
Regards,
Gyan

I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am now trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera l

I just made the switch to mac. I am have installed all the new PS6 CC and bridge and I am now trying to add some presets to my ACR but when I search for the folder to place them it is not there. From what I researched it says it should be under camera library/application support/adobe/camera raw/settings but I can only get to library/application support/adobe/ and then there are two different camera raw options I have checked both and there are not settings folder. If anyone can help me please thanks

Apple most likely has the same poor taste that Microsoft does when it come to defaults. Microsoft likes to hide things like settings, preset, folders etc from normal users think the dumb or something else. If Apple also hide things you will have to make some system setting changes that will allow Finder to do it job and find it for you.

Trying to add a flowable/expandable text field to the end of a form

I have created a form in LiveCycle Designer. At the end of that form, I would like a Summary text box that expands to allow the person who is filling out the form to type as much information as is necessary and it will all be visible/print when they are done. I have the field to the point where it will expand (finally!) but I have requested that the field allow page breaks (including all subforms it is contained within) but when it expands, it all carries over to the next page and doesn't allow us to go beyond one page of typing. Is there anyway to remedy this situation so the text will actually "flow" from one page to another instead of just carrying it over?

I appreciate you replying to my post and maybe this is just that I have never used the forum before but your reply said that you hoped the sample document would help me and I don't see a sample document attached to the reply. Am I missing something?
Date: Wed, 24 Nov 2010 18:32:12 -0700
From: [email protected]
To: [email protected]
Subject: Trying to add a flowable/expandable text field to the end of a form
I hope this sample file solve your issue too.
>

Class is not appearing in "Java Batch Job Class Search" when trying to add.

Hi,
I have oracle CC&B 2.3.1, with SDK 2.2.0.12. I am trying to create new java batch job class by copying an existing one and modifying it to be used with new Batch Control .
Steps are as follows:
1-Created file by copying the exiting file
CreateLatePaymentChargesProcess.java ; and only changing the name of the class:
public class CmCreateLatePaymentChargesProcess
extends CmCreateLatePaymentChargesProcess_Gen
File location :
D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess.java
D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess_Gen.java
2-Run ApplyCm build successfully , which generated these files:
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess_Gen$1.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ThreadParameters.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ToDoProperties.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$JobParameters.class
D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen.class
All the above classes are part of CM.jar file
ContextManagedObjects.xml ; contains these information
<com.splwg.shared.environ.ContextManagedObjectData>;
<domainPackages/>
<lookupFieldClasses class="tree-map">
<no-comparator/>
</lookupFieldClasses>
<cobolAlgorithmInterfaceExtensions class="tree-map">
<no-comparator/>
</cobolAlgorithmInterfaceExtensions>
</com.splwg.shared.environ.ContextManagedObjectData>;
packageMetaInfo.xml was not created
Still the class is not appearing in "Java Batch Job Class Search" when trying to add a new program name referencing this java class.
I tried restarting the Tomcat application server, still not appearing.
Where did I go wrong about it?
Thanks
Edited by: cc&amp;amp;b-user on Jul 29, 2011 12:39 AM
Edited by: ccb-user on Aug 2, 2011 9:28 PM
Edited by: ccb-user on Aug 7, 2011 11:36 PM

Hi,
Did you copying the base file CreateLatePaymentChargesProcess.java?
I also create a new batch job which copying the CreateLatePaymentChargesProcess batch code the only difference in getBills() method query and inner class CreateLatePaymentChargesProcessWorker extend CmCreateLatePaymentChargesProcessWorker_Gen, instead of CreateLatePaymentChargesProcessWorker_Gen.
The batch is working fine in my end.
Thanks,
Atul Singh.

Trying to Add a DFF Search criteria in Oracle Receivables (Customers HTML)

Hi Everyone,
I am trying to add a DFF search criteria within the Customer's HTML page. I was able to add the new message box, but am not sure how to tie the box to attribute 3 which is in the Receivables Party information Descriptive flex field. Oracle ebs r12.1.2 is the system.
Thanks for the help,
-Mike

Yes. It is possible through personalization.
1. Create a criteria row under Advance Search
2. Create a Result Item under advance table columns
3. Create a Query Criteria Map based on the criteria and result item above.
Please note the newly added criteria field should be in the Searchresults VO attributes list.
Otherwise you need to extend the VO as well.
Hope this helps.
Regards,
-Mukesh.

Add search (torch) functionality with in custom form

Hi
I wanted to add search functionality (torch) in my custom form. How to do that? Any guideline or ez steps to follow to give serach on certain field of my custom form?
regards

Chapter 8 of developer guide helps a lot. Just wanna share if someone curious.
regards

Trying to install search add-ons (top-rated, safe). I click install, restart and nothing happens. They do not appear in the search plugins folder.

Starting up with a new computer, I've been trying to install two search engine add-ons: easy youtube video downloader and
search IMDB. They are top rated so presumably safe and approved. I go through the whole process of installing them, and restart Firefox as instructed but nothing happens. I looked in the search plugins folder in Firefox (Program Files). I can see the search add-ons that were there when I first started on this computer, but none of the ones I'm trying to add are there. I've gone around and around on this repeatedly with no success. Please help.

Addon search engines aren't in the Firefox program files \searchplugins\ folder, they are in the \searchplugins\ folder in the user's respective '''Profile''' folder.
https://support.mozilla.com/en-US/kb/Profiles#w_how-do-i-find-my-profile

Repeated crashes when trying to add form

Hello,
I am using DW CS3 with DDT and whenever I try to add a Nextensio form to a page, DW will crash after I finish the wizard.
I am using Windows XP pro SP2 and I have 2GB RAM.
This is a new site ( I have to remake site as I had used ADODB in original)
Any thoughts?
Thanks.
Chris

Thanks Richard,
That did the trick.
Cheers.
Chris
[email protected] wrote:
> I was having the same problem. This was a huge pain but check out this thread. It did work
>
>
http://www.adobeforums.com/cgi-bin/webx/.3bc412a6/3

Trying to add a paypal button in actionscript 2.0?

So the company I work for wants to add a paypal button to the website (not a buynow or a shopping cart). We received the html code but the flash doesn't accept it. So I've been creating an actionscript for it without luck.
I've tried:
on(release){getURL("https://www.paypal/cart/add=1&business= EMAIL HERE");
cmd="_cart";
business="EMAIL HERE";
value="ACCOUNT CODE"
I received no errors and it goes to paypal but doesn't link the customer with the account.
So I tried this:
on (release) {getURL(form action)=("https://www.paypal.com/cgi-bin/webscr",method="post");}
on (release) {var link:String=("https://www.paypal.com/cgi-bin/webscr");}
on (release) {var cmd:String="_x-sclick";}
var encrypted:String="<form action= {getURL(form action)=("https://www.paypal.com/cgi-bin/webscr",method="post");}
input type="hidden" name="cmd" value="_s-xclick
input type="hidden" name="hosted_button_id" value="CZ6JUTK9ND9QU"
input type="image" src=("https://www.paypal.com/en_US/i/btn/btn_buynowCC_LG.gif" border="0" name="submit" alt="PayPal - The safer, easier way to pay online!");
img alt="" border="0" src="https://www.paypal.com/en_US/i/scr/pixel.gif" width="1" height="1"
/form
var paypal:LoadVars=new LoadVars();
function sumbit (){
paypal.cmd=cmd;
paypal.encrypted=encrypted;
paypal.send (link,"_blank","POST")
But receive 1 error and it doesn't do much of anything.
I need help

Zoom Search Engine software
http://www.wrensoft.com/zoom/index.html
Free Find
http://www.freefind.com/
Google Site Search -
http://www.google.com/sitesearch/
Web Assist DW Tools for Google (free)
http://www.webassist.com/free-downloads/dreamweaver-extensions/dreamweaver-tools-for-googl e/
Nancy O.

How to add Predefined PDF Form as a Template in BIP - 11g

Can anybody please help me to understand how to add Predefined PDF Form as a Template in BIP - 11g and how to map the Form fields with the Data Elelment.
I tried it with 10 g set up as well, but I found following things
1) PDF form template mapping was only available whenever we provide sample data with the same filed name and also number of fileld should be same.
2) According to user manual that I have, it says that whenever I click on the form field while mapping the form field data elements, it should open a new window having the corresponding mapping details.
But in my case no new window was opened when I clicked on the form field while mapping.
Please help me out since i am beginner with BIP and have to move forward with Predefined PDF Form as a Template in BIP - 11g.

I am new to BIP-11g. But i have created rtf, pdf templates in 10g. I am migrating reports to 11g. If you know How to add Predefined PDF Form as a Template in BIP - 11g , Please let me know.
In 10 g you need to do the following things
1. First you need to create data template.
2. Then you have to upload pdf template.
3. After you have uploaded the pdf template, Map Form Fields tab will appear. Then you can map the form fields.

HT1597 How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers po

How can I STOP iTunes from automatically trying to add podcasts to my iPod when I plug it in and sync it, so I can manage the files? I have already unchecked "Sync Podcasts" and "Automatically include,"yet EVERY time I sync it,it still transfers podcasts as the last step, and at other times randomly, when trying to just add some MP3's to a playlist, for example. I can't seem to find any other option to uncheck, and can't find an answer from my so-far internet searching.

erict, you blew me away with that suggestion! It was something so simple I couldnt believe I hadnt thought of it! But in the end it didn't work, which I was really surprised about. On Windows anytime anything was moved itunes was hoplessly lost, but on this mac it still kept up with everything. I tried renaming folders, moving folders, and even renaming moved folders but it still kept trying to import.
I even went as far as deleting EVERYTHING i had moved to the Mac, which didnt really work. It still kept trying to import what wasnt there which made it continue to freeze up. However, after doing this it, the freezing was not nearly as bad. It gave me enough of a break to cancel it through the itunes dialog box at the top of the app. So in the end, thats all I really needed to do, only before I had deleted everything the freezing would not allow me to do it.
So now Im reimporting everything again, only slowly, and only a few Artists at a time.

Bridge cc will not open after trying to add patch aom package (adobe output module) to workspace

bridge cc will not open after trying to add patch aom package (adobe output module) to workspace. this patch was recommended by adobe help to allow creating pdf presentations. the help stated bridge cc was shipped without this and to download aom package win 64. I tried that, and either did something wrong or? I deleted bridge cc 64 bit, then went to cc and downloaded bridge cc (not sure if it is 32 or 64) and the program still does not open. any ideas?

There are lots of threads on this. Do a web search.

I am trying to fill in a form in adobe exportpdf. How can I fill in numbers and symbols? Parenthesis, dollar sign etc.

I am trying to fill in a form in adobe exportpdf. How can I fill in numbers and symbols? Parenthesis, dollar sign etc.

Hi;
Can you provide a little more detail, maybe a screenshot? ExportPDF only converts PDFs to other file types, what exactly are you using to try to fill out the form? The two Adobe form filling tools I would recommend would be:
1) Adobe Reader - a free download you can install on your computer and can be used to fill out most any form. For numbers, symbols etc it can depend on the field you are entering data into, some fields have restrictions, but you would use those keys on your keyboard, if nothing is entered then that field probably has restrictions.
2) Adobe Fill & Sign: https://cloud.acrobat.com/fillsign - using the Fill & Sign tab on the acrobat.com website you can fill out most PDFs. To enter numbers, symbols, etc you would simply add them using your keyboard.
Thanks,
Josh

Trying to Add "search" to Form

Similar Messages

Maybe you are looking for