Trying to add transition between two videos?

I have to clips of video both around 5 secs each. They were both .mov files but when I try to add a transition between them it doesn't work.

Your clips need "Handles".
See this, posted a short while ago by me:
http://discussions.apple.com/message.jspa?messageID=9022180#9022180

Similar Messages

I am trying to put a transition between two clips and it's not going.

I am working in FInal Cut Pro X and until now have had no problem putting trasitions into my timeline. Now I'm trying to put it between two video clips and it's not even moving there. Is there something I might have turned off that's not allowing me to do this

You mean red like this
That's the end of the media. No handles for an overlap. You can still do a full overlap transition, but it will shorten the project and shift the content.

Use more than one transition in the same time between two video clips?

Dear Premiere Pro programmers,
Could you please create a way to use more than one transition in the same time between two video clips without exporting to media, or creating new sequence, or using another layer (adjustment or transparent)?
Message was edited by: Kevin Monahan
Reason: Next time, create a more descriptive title.

Hi Aqsa Nori,
I'm not sure what you are imagining, but it might be possible to achieve by key framing effects. Can you tell us what you want to do? Also, please feel free to file a feature request: http://adobe.ly/feature_request
Thanks,
Kevin

Transition between two movies

I would like to add a transition between two movies in the
following AS3 script that otherwise works fine. Any help is
appreciated:
package {
import flash.display.MovieClip;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.Event;
import fl.controls.listClasses.CellRenderer;
import fl.controls.ScrollBarDirection;
import fl.video.VideoEvent;
public class VideoPlaylistSeq extends MovieClip {
private var xmlLoader:URLLoader;
public function VideoPlaylistSeq():void {
// Load the playlist file, then initialize the media player.
xmlLoader = new URLLoader();
xmlLoader.addEventListener(Event.COMPLETE, initMediaPlayer);
xmlLoader.load(new URLRequest("playlist.xml"));
// Format the tileList, specify its cellRenderer class.
//Width and length of bigger thumb box
tileList.setSize(300, 515);
//Width for text box where thumb text is placed
tileList.columnWidth = 230;
tileList.rowHeight = 60;
tileList.direction = ScrollBarDirection.VERTICAL;
tileList.setStyle("cellRenderer", Thumb);
public function initMediaPlayer(event:Event):void {
var myXML:XML = new XML(xmlLoader.data);
var item:XML;
for each(item in myXML.vid) { // populate playlist.
// Get thumbnail value and assign to cellrenderer.
var thumb:String;
if(item.hasOwnProperty("@thumb")>0) thumb = item.@thumb;
// Send data to tileList.
tileList.addItem({
label:item.attribute("desc1").toXMLString(),
label:item.attribute("desc2").toXMLString(),
data:item.attribute("src").toXMLString(),
source:thumb});;
// listen for complete event; play next video
function vidComplete(eventObject:VideoEvent):void {
if(tileList.selectedIndex < tileList.length-1){
tileList.selectedIndex = tileList.selectedIndex+1;
} else {
tileList.selectedIndex=0;
tileList.scrollToIndex(tileList.selectedIndex);
myVid.play(tileList.selectedItem.data);
// Select the first video.
tileList.selectedIndex = 0;
// Listen for item selection.
tileList.addEventListener(Event.CHANGE, listListener);
// And automatically load it into myVid.
myVid.source = tileList.selectedItem.data;
// Pause video until selected or played.
//myVid.pause();
// Listen for end of current video, then play the next
myVid.addEventListener(VideoEvent.COMPLETE, vidComplete);
// Detect when new video is selected, and play it
function listListener(event:Event):void {
myVid.play(event.target.selectedItem.data);
// listen for complete event; play next video
function vidComplete(eventObject:VideoEvent):void {
if(tileList.selectedIndex < tileList.length-1){
tileList.selectedIndex = tileList.selectedIndex+1;
tileList.scrollToIndex(tileList.selectedIndex);
myVid.play(tileList.selectedItem.data);
}

Let us know.
There are bluray menu limitations; they don't come up often, and I do not understand some of them. For example, there is a limit in Encore of 32 buttons per menu. (That does not appear to be a problem for you.) There is a limit to the size of all interactive graphics in each title (which includes a menu as a title). I don't understand that one.
I would do a test project, starting over, and building a less complex project that still has the essential features.
I have found Total Media Theater 5 to perform very much like a bluray player. But, yes, ultimately you've got to burn to a disk and test it on a bluray player.

Basic transition between two pictures (MCs)

I'm trying to implement a typical gallery fade transition
between two pictures when a thumbnail is clicked, but the tweens
aren't showing. The individual pic information is loaded from an
XML file, not the library. The correct picture is displayed, but it
just flickers as if I was doing a straight assignment and the
tweens weren't even there.
I've got one MC on the top layer to hold the old image, and
one on the bottom layer to load the new image. When it's loaded I
want to fade out the top and fade in the bottom. At one point while
playing around I did get one of the tweens to work but at the wrong
time, so is this a timing issue?
A nudge in the right direction would be appreciated!
David

Not really, it was more for organizational purposes when I
was starting out. At this point it's all down in just one layer.
As I understand it, the screen does not update during the
event, only after. Which would explain why things aren't doing what
I expect. But if that's the case, where should the transitions be
implemented? Every example I've found so far has all the images
added to the library at design time, or does a workaround like
having the image slide in and out of the screen so you don't need a
transition.
I tried putting the tweens in the photoLoader complete event
and that didn't work either.
David

How to add space between two tabs in accodion widget?

Hi! I am using the accordion widgets and trying to add space between each of the tabs, would someone help me on this. Thanks

Directly editing the output of Muse is virtually always a bad idea. At a minimum it will create a very cumbersome workflow since Muse will overwrite your changes every time you re-export (export, upload, publish, preview).
It depends on exactly what visual effect you want to achieve, but you probably just need to select the accordion widget and use the Spacing panel to adjust the vertical gutter value.

I can't add transitions between clips, but between generated media?!

I can't add transitions between clips, but between generated media?! Any ideas?

I am assumming you are working with "connected clips" which are either above or below the main storyline "track" (the one you put your first project clip onto when you started the project). You can only add transitions to clips that are on either the primary storyline or on a created storyline. Select the clips you are working with then choose the Clip menu and the Create Storyline selection. Make sure snap is set to assure your clips are really butted up against each other. Then apply the transitions.

Can I have a movie as a transition between two submenus? (iDVD)

I was wondering if it's possible to have a movie file as a transition between two menus on iDVD? All I can see is the preset ones (dissolve, droplet, fade through black etc.). What I'd like is to use a very short QT file with a few quick sweeping shots of the content that is going to be showcased on the next menu. I've seen it in quite a few Hollywood film DVDs and wondered if it was possible to do on simple ole' iDVD. Apologies if this question has already been asked. This is my first post so new to this forum lark- I did do a search though but nothing relevant came up...
Any help would be much appreciated.
Thanks,
Andy.

Although that's an idea, I still don't think there's any physical way to have a movie end and redirect to any menu except the original one on which it was clicked. In other words, playing a movie on an iDVD-made DVD is always a dead end and will come up with the same menu when it ends. I probably need to learn DVD studio pro I'm sure I'd be able to produce more polished stuff too.

I have never used iMovie before. I would like to connect many videos together and edit them. I would also like to learn how to add transitions between scenes and add music. Help!

Hey Everyone!
I want to learn how to create a video in iMovie. My goal is to be able to take many vidoes and place them into one. I would also like to delete scenes and and add transitions. I am also hoping to add music to the video I create.
Please help or direct me to an area that will help me! =)

Here is some extra information (which I intended to include in my previous aborted post):
iLife '11 Video Showcase (scroll down to see iMovie '11) -
http://www.apple.com/ilife/video-showcase/
iMovie '11 Help (can also be accessed from iMovie's menu item Help>iMovie Help) -
http://help.apple.com/imovie/#button-0
(the same link that Karsten provided above)
Ken Stone's iMovie '09 Tutorial (still mostly relevant to iMovie '11) -
http://www.kenstone.net/fcp_homepage/imovie_09_stone.html
In addition, the following links will be useful (relating to iMovie '08 and iMovie '09, but still mostly relevant to iMovie '11) -
http://www.apple.com/findouthow/movies/imovie08.html
http://www.apple.com/findouthow/movies/
Note that some of the above links contain video tutorials. It's well worth watching all that you come across!
Have fun with iMovie '11 and don't hesitate to seek further help here in this forum.
John

PRE8 - Transitioning between multiple video tracks

Hi,
I've been making Youtube vids for awhile with a web cam, and using a Microsoft app to sync my audio up with the webcam.
I now have a second camera, and have purchased PRE8 for some of the effects, and to try to sync the video closer to the audio (as well as adding multiple camera shots).
I've recorded all my video angles (5 in all) and have been trying to switch between video tracks.
I first set my audio track into PRE8, then the first video. I work to sync the two, then mute the audio track from the webcam video clip.
When I add a second video clip in, can I add it as a new video track, and then transition between them?
The book I have only uses separate video clips, all stacked onto one video track.
The problem with me doing that is, I need to pull all 5 video clips in, sync them to the audio track, and then change in between them.
Having to clip them duration wise for every transition is going to take awhile, and seems like it would be hard to get right.
Does anyone have any suggestions?
Let me know if you need more information from me to help.
Thanks!

Well, the Multi-cam feature would simplify life a bit, but there is a big difference in the cost of the two programs.
What I would do is look at a workflow, something like this:
Import your main footage, probably a Clip with a medium wide shot, and drag it to the Timeline. Now, does this Clip contain the full song, or was that recorded separately? Either way, check for the sync for the entire Clip. When you play this Clip, use the * key on the numberpad (with NumLock ON), to place Markers where you think you will want the "cut-away" shots. Don't worry if they are not exactly where you will end up placing the cut-aways, as they are just there to remind you. Now, with the cut-aways, Import one of those into Project. From the Project Panel, Dbl-click on it to open it in the Source Monitor. Set the In and Out Points to suit, and then from the Source Monitor, drag that Instance of the Clip onto an upper Video Track. Let any Audio go where ever PrPro wants it, because you will Alt-click on that Audio, and Delete it. Now, slide it along the Timeline, until it syncs up with the "master" Audio Track. You have the benefit of knowing which strings you are plucking, or which chords you are using, so it will be much easier for you. Were I doing that, I would not have a clue, and would have to use that Clip's Audio to try and match up the visuals.
Remember, that source Clip can have its In & Out Points set as many times as you wish, and you can add any number of Instances to the Timeline, where you wish, and repeat the process of visually syncing to the master Audio.
Repeat for the other desired angles.
When you are done, just add a Cross-Dissolve to each end of each of the additional Clips, as desired.
From an aesthetic standpoint, you might also want to think about doing some of those "different angles" as PiP (Picture in Picture). I have seen that treatment used very successfully with musical pieces, especially if they are instructional in nature.
Let me know if the above workflow seems logical for what you have, and what you want to do.
Good luck,
Hunt

Error message when trying to add transitions

can't add transitions in imovie 6, but I could 2 days ago. It was also failing to render titles.I tried these suggestions from this great forum: trashed iMovie prefs,repaired permissions, checked for 3rd party plug-ins, ran repair hard disk,ran MacJanitor, reinstalled imovie 6,freed up 28 GB on hd, but still couldn't render titles. After I ran diskWarrior, I was able to render titles again but still can't add transitions.Is the number of photos or titles an issue? I have 450 and still need to add video clips & music. I have to have this idvd project for our church done in 3 days and things keep screwing up!

What is your operating system? Reader version?

Add space between two rows

Hello,
I need to add space between rows. Please let me know how to go about.
I have a messgeComponentLayout Region, i am trying to create a space between two rows.
Presently it is as follows:
Vacation Plan
Sick Plan
I need as follows:
Vacation Plan
Sick Plan
Please let me know how to go about.
Thanks!

The foll. is the region, how do i incorporate the rowLayout as suggested in the discussion. Please let me know.
<?xml version = '1.0' encoding = 'UTF-8'?>

<oa:header version="9.0.3.8.12_1330" xml:lang="en-US" xmlns:oa="http://xmlns.oracle.com/oa" xmlns:jrad="http://xmlns.oracle.com/jrad" xmlns:ui="http://xmlns.oracle.com/uix/ui" xmlns:user="http://xmlns.oracle.com/jrad/user" xmlns="http://xmlns.oracle.com/jrad" file-version="$Header$" text="Year to Date Accruals and Time Taken (total hrs.):" amDefName="xbol.oracle.apps.xbol.selfservice.loa.server.YtdAM">
<ui:contents>
<oa:messageComponentLayout controllerClass="xbol.oracle.apps.xbol.selfservice.loa.webui.MainRNCO" rows="7" columns="2" amDefName="xbol.oracle.apps.xbol.selfservice.loa.server.YtdAM" id="Main">
<ui:contents>
<oa:messageStyledText id="VaPlCo" prompt="US Vacation Carry Over" viewName="VacPlAcVO1" viewAttr="VacationCarryOver" styleClass="OraDataText"/>
<oa:messageStyledText id="VaPlAc" prompt="US Vacation Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsVacationPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="VaTk" prompt="Vacation Taken" viewName="VacPlAcVO1" viewAttr="VacationPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="FlPlAc" prompt="US Floating Holiday Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsFloatingHolidayPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="FlTk" prompt="Floating Holiday Taken" viewName="VacPlAcVO1" viewAttr="FloatingHolidayPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="AcBaTk" prompt="Accrual Bank Taken" viewName="VacPlAcVO1" viewAttr="AccrualBankPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="item2"/>
<oa:messageStyledText id="SiPlCo" prompt="US Sick Plan Carry Over" viewName="VacPlAcVO1" viewAttr="SickCarryOver" styleClass="OraDataText"/>
<oa:messageStyledText id="SiPlAc" prompt="US Sick Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsSickPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="SiTk" prompt="Sick Taken" viewName="VacPlAcVO1" viewAttr="SickPlan" styleClass="OraDataText"/>
<oa:messageStyledText id="item1" rendered="true"/>
<oa:messageStyledText id="PePlAc" prompt="US Personal Leave Plan Accrual" viewName="VacPlAcVO1" viewAttr="UsPersonalLeavePlan" styleClass="OraDataText"/>
<oa:messageStyledText id="PeTk" prompt="Personal Taken" viewName="VacPlAcVO1" viewAttr="PersonalLeavePlan" styleClass="OraDataText"/>
</ui:contents>
</oa:messageComponentLayout>
</ui:contents>
</oa:header>

Tried to setup Shared between two MacBooks, now cannot login to either

I tried to setup a sharing folder between two MacBooks at home, both have Snow Leopard and with the latest software update, but when I turned off both MacBooks then turned them back on, it will not go pass the white Apple screen showing it's processing, but does not go to the login screen.
What can I do to login back into my MacBooks?
Thanks
-Erica

Ok, I don't follow that.
You selected the Hard Drive and Get Info.
Now, did you click the Shared Folder check box, or did you go to Sharing and Permissons and make changes?
changed the shared settings to a folder on both MacBooks
There is no ability to change settings to a folder from the Get Info panel. You can add a user and give them specific access, or change the current user's access rights, but not indicate a folder.

How to add image between two string

how to add a image between two string .
example :
String one <IMG> String two

grid1 = new GridLayout( 2, 3, 5, 5);
container = getContentPane();
container.setLayout(grid1);
The parameters in GridLayout specifies 2 rows, 3 columns, 5pixels of horizontal gap, 5pixels of vertical gap.
Did what i could to help, now can somebody help me with JDialog? =(

Can;t find what is wrong. Trying to add elements in two arrays

Hello everyone
I'm trying to take as input two numbers, convert them to arrays and add all the element of the array one by one. I want the result to be the sum of every element of the array. Let's say array1={1,2,3,4} and array2={2,6,4,3} I want the final result to be 3877.
If the sum of one element of the array is greater than nine, then I would put zero and add 1 to the element on the left.
Here is the code:
import javax.swing.JOptionPane;
public class Main {
    public static void main(String[] args) {
        String numberOne = JOptionPane.showInputDialog
                                ("Enter the first number: ");
     String numberTwo = JOptionPane.showInputDialog
                                ("Enter the second number: ");
        //compare string length and make them equal length
        int[]n1 = toArray(numberOne); // my first array
     int[]n2 = toArray(numberTwo); // my second array
     //call the method that ads both strings
     int[]finalArray = arrSum(n1,n2);
       JOptionPane.showMessageDialog(null, "The sum of the two numbers is: "
               + finalArray);
    }//end of main
    //method to create an array from a string
    public static int[] toArray(String str)
            int[]arr = new int[str.length()];
            arr[0]=0;
            for (int i=1; i<str.length(); i++)
          arr= Character.digit(str.charAt(i),10);
return arr;
}//end of toArray
//method to add arrays by elements
public static int[]arrSum (int[]arr1, int[]arr2){
for (int i = arr1.length-1; i >=1; i--)
int sum = arr1[i] + arr2[i];
if (sum > 9)
          { sum -= 10;
          arr1[i-1]++;
return arr1;
}//end of arrSum method
}Edited by: designbc01 on Feb 16, 2010 1:15 AM

The best advice I can give you is to break your problem up into smaller pieces. First, focus on a method that converts an input String into an array. When you have that working perfectly, then focus on creating a method that "adds" two arrays with the logic you described. When you have that working perfectly, then combine the two different pieces.
Why does your for loop in toArray( ) start with 1? The first index of a String, array, or pretty much anything else, is zero.

Trying to add transition between two videos?

Similar Messages

Maybe you are looking for