Trying to configure Portal to run off the network

Hi all,
I am trying to configure Oracle Portal 3.0.9.8.2 to run off the network. I have taken all of the recommended steps in terms of configuring hostname, using a static IP, running and checking the ssoodatan script, updating the hosts file, and configuring a loopback adapter, but can still not make it work. The Portal works and functions fine when connected to the network, but as soon as disconnected from the network Portal returns
Error: Timeout occurred whilst retrieving page meta data 0 ms.
or
Sometimes it will display the banner, but the Portlets and the Providers will instantly timeout. I have cranked up the timeout levels of JServ and the Providers but to no avail. I have put the recommended timeout, stall, requesttime, buffer, minStall, minTimeout in the zone.properties file, but no luck.
I have noticed within the jserv.log the error message below. The link that jumps out at me is UnknownHostException: www-proxy.us.oracle.com. I did have my proxy server set at one time, but I erased it from the global settings page, and I ran the procedure I found somewhere on this discussion board to make sure it was set back to null. When I run the diag.cmd program it shows my proxy server being empty. Where could this be picking this up from, I also have proxy servers turned off in my browsers. Any suggestions or help??
13/02/2002 16:04:08:752 PST] page/JNI: Exception when trying to connect in 1.
[13/02/2002 16:04:08:752 PST] page/Timeout occurred, label=147 url=http://jstrada-lap.us.oracle.com/pls/portal30/!PORTAL30.wwpro_app_provider.execute_portlet time=10ms
[13/02/2002 16:04:08:762 PST] page/ContentFetcher Unexpected Exception, name=content-fetcher0
java.net.UnknownHostException: www-proxy.us.oracle.com
     at java.net.InetAddress.getAllByName0(InetAddress.java:575)
     at java.net.InetAddress.getAllByName0(InetAddress.java:544)
     at java.net.InetAddress.getAllByName(InetAddress.java:537)
     at HTTPClient.HTTPConnection$EstablishConnection.run(HTTPConnection.java, Compiled Code)

I think you must add an entry to your /etc/hosts file, as follows:
127.0.0.1 noa noa
and create a vhost entry on /etc/httpd/conf/extra/httpd-vhosts
<VirtualHost *:80>
ServerName noa
DocumentRoot "/srv/http/"
<Directory "/src/http/">
Options Indexes FollowSymLinks
AllowOverride None
Require all granted
</Directory>
</VirtualHost>
Although I'm not sure if the vhost is actually necesary, but it won't harm.
pd: if you use vhosts, remember to uncomment "Include conf/extra/httpd-vhosts.conf" con /etc/httpd/conf/httpd.conf and restart apache
# systemctl restart httpd

Similar Messages

JUmbled text in Safari, and it runs off the page and behind images

i have a really annoying problem that is only happening in Safari under every user on my computer.
I have been to the Apple store and they have tried to fix it, but it perplexed everyone there I guess,
either that or the fact that it was 8:30 and they close at 9... go figure. Anyways- When in Safari on
certain websites that are heavier on text the words displayed in the headlines or body copy overlap, become jumbled, and run off the page.
As I am typing this it is not letting my words wrap to the next line in the text box, I have to hit enter
everytime I want to go to a new line. This problem is getting so annoying, and I am on the brink of
switching to Firefox but I love Safari so much more. Can someone please help? I have already look
at the " never display fonts larger than____ option" I am hopelessly in need of some advice. Thanks
in advance for your time and patience. Have a great day!
Bill

howard --
This is your third post on the this subject in the last 5 days.
It's not necessary to start a new topic everytime.
Just check your "My Posts" in the box to the right of this message,
and you can always go right back to your posts.
Now, it looks like Hawaiian Starman & Rachel have already guided you
to look at your RSS feeds, etc. Why don't you check out their responses,
and then let us know here what the results are, OK?
Here are your other two threads:
http://discussions.apple.com/message.jspa?messageID=5354423#5354423
http://discussions.apple.com/message.jspa?messageID=5307512#5307512

Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport. Then they can get on, but it knocks one of our devices off the network. Any ideas?

Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport. Then they can get on, but it knocks one of our devices off the network. Any ideas?

I have not done a factory reset, I was trying to find out if I had some setting configured wrong first. I figured I'd just make things worse if went through a reset!
Here is a couple of screen shots:

Hi, I've been trying to configure my MacBook Air to the iCloud and for the last 3 days it's still uploading my calender. Also a few entries made to the calender in the last few days seem to have gone missing. Is this normal? How long will the upload take?

Hi, I've been trying to configure my MacBook Air to the iCloud and for the last 3 days it's still uploading my calender. Also a few entries made to the calender in the last few days seem to have gone missing. Is this normal? How long will the upload take?

Since the maximum OS X version for an eMac is 10.5, how are you running OS X 10.7.5 on the eMac?
http://support.apple.com/kb/TS1591

Netflix subtitles are running off the bottom of the screen?

I have trouble watching some Netflix foreign films. Many times the subtitles are running off the bottom of the screen. I have the res set to 720p (my tv res) , and have tried every other resolution in my monitors preferences, but to no avail. Any ideas?

Your "content" container CSS calls for a certain height and your content exceeds that attribute
#content {
width: 748px;
height: 690px;
z-index: 1;
left: 108px;
top: 213px;
background-image: url(images/content.png);
margin-right: auto;
margin-left: auto;
margin-top: 50px;
margin-bottom: 0px;
padding-left: 10px;
padding-right: 10px;

Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigge

Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigger issue or does a battery need to be in the compartment to boot up? Appreciate any help. Thanks.

Working battery needs to be in for the computer to function.

Why do double-sided copies run off the edge when single-sided do not?

Hi...
I just made a document in Pages that is essentially one big table (or in other words, a spreadsheet without having to purchase Numbers). When I print it as single-sided, it fits perfectly on the page. But if I click double-sided, without changing anything else, the left margin runs off the page. The nature of this is such that I don't really want to significantly reduce the size. Is there some trick to this, or do I just have to remember to print it one-sided?
Thanks!

There should be an arrow, to get more choices to show. Also the checkbox is just showing you the current selected, you change the setting by touch the big icon, not the checkbox. The touch panel is not a high resolution one, so try to touch the checkbox, result in the icon being selected, that's why the setting didn't change. Try find the 1:1 icon and touch that.
======================================================================================
* I am an HP employee. *
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
***Click on White “Kudos” STAR to say thanks!***

A document page opens that is too big for the display and runs off the end of the monitor

How do you fix a problem where document pages open that are too big for the display and runs off the end of the monitor? The borders are off the monitor so there is no window edge to grab and adjust.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Recently bought 4S, it keeps searching for network, reads invalid SIM, keeps searching for network, have switched the handset on and off several times, have tried 2 new micro chips, re set the network too ! nothing seems to be working !!! Iam in Delhi

recently bought 4S, it keeps searching for network, reads invalid SIM, keeps searching for network, have switched the handset on and off several times, have tried 2 new micro chips, re set the network too ! nothing seems to be working !!! Iam in Delhi

Obvious question... where did you buy your 4S and is factory unlocked?

My bookmarks run off the bottom of the page, and I cannot move them up

When I open my bookmark folder and try to open a subfolder near the bottom of the screen, the bookmarks in this subfolder run off the bottom of the screen, and I can find no way to move them into a visible area.

There is a little triangle arrowhead used to scroll the bookmarks.
There have been some changes in pre release versions of Firefox.
What menus and icons are you using ?
For instance are you using the new menu icon that is alongside the Bookmarks star in Firefox 29 and later ?
(Unlikely from the description) Or are you using a second click on the bookmarks star itself ?
That has a slider on the scrollbar and has a tree of folders that may be expanded.
See [[Use bookmark folders to organize your bookmarks]]

MBP Won't Run Off the Battery

I've had my computer for a little over a month, and the other day it stopped running off the battery. Everything is fine when I have the AC adapter plugged in, but the computer won't start up if it is disconnected. I ran the computer off the battery more often than not before this started happening. I removed the battery and put it back in a few times, but that didn't help. Has anyone seen this before? Thanks!

Mine did almost the exact same thing.
A few days after the update, it started registering 32 hours of remaining charge (33500+ MhA), and one day, all of a sudden, the battery just died.
Mac OS says there is no battery installed, obviously it won't charge or run on battery power, when I press the LED button it does nothing. It's just dead.
My machine is almost 2 months old... I called Apple and complained about this whole thing, because my machine has almost every other defect out there, including the whine, the almost unbearable temperatures, the moo, and the LED buzz... so I told them that enough was enough and that I wanted a new machine.
They just said I sould drop it off at the Apple Center, and THEY would decide if should get a new machine.
I feel so terribly frustrated. How is it possible that you spend $2000+ Dlls on a machine that after just 2 months does all these things, and still be treated unfairly, like an idiot, with arguments like "It's our decision if we replace the machine, or repair it..." ??
This is just not fair. But what can we do, right?

No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?

No IP address, everytime I'm close to my mums mac running off the same wifi, it's giving me this error. I can trouble shoot for about 3 mins and fix it, but it just keeps happening and I need a permanent fix for it. Any help?

this is what you need to do to exclude everything apart from desktop.
on time machine preferences, click on Options
click plus sign, on the new window, click macintosh HD
do a Control + A then deselect users then click okay
go to options again, plus sign, go to users, control +A then deselect your user account
go to options again, plus sign, go to your user account, control + A, deselect desktop
start the back up.

I need instructions on creating a configuration profile to turn off the Deleting Apps button on an iPad using the iPhone Configuration Utility, please.

I need instructions on creating a configuration profile to turn off the Deleting Apps button on an iPad using the iPhone Configuration Utility, please.

The deleting apps restriction is new in iOS 6 but is available only on supervised devices. You can supervise devices and create and install a configuration profile containing this restriction using Apple Configurator.

I cannot set up page set prior to printing. From file to Page set then it comes up full depth..running off the bottom. I cannot print from the web

Question
I cannot set up page set prior to printing.
I go from File to Page set which comes up very narrow and tabs Format& Options and Margins Headers/Footers.
These are full depth..running off the bottom. I cannot set footers. I cannot print from the web
When I go to Print Preview I get a totally gray screen

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

How do I change the compatibility view so that my words are not running off the page?

I do data entry and in the system I am working on the words are running off the page. In internet explorer there is a little broken page on the tool bar that lets you change the compatibility and I am not finding anything like that with firefox. Please advise how I can change the setting so that the words will wrap correctly.

As far as I know, Firefox doesn't have a similar compatibility feature.
I assume this system is not accessible to forum volunteers, so I'm going to ask you to do a little sleuthing. I assume you are entering text in a multi-line textbox (an HTML <textarea> control). Could you do the following:
* Have your text entry form open in one tab, and a reply to this thread in another tab.
* Right-click in the control that doesn't wrap and choose Inspect Element. A small pane should open with part of the HTML highlighted in blue.
* Right-click the highlighted <textarea> tag and choose Copy Outer HTML.
* In your reply tab, paste the HTML, and remove the leading < character to avoid messing up your post. This will show any legacy settings on the tag that might be affecting how it wraps.
Here's an example using this very box:
textarea style="width: 567px; height: 616px;" rows="10" name="content" required="required" placeholder="Enter your reply here." cols="40" id="id_content"></textarea>
If it's not a textarea, then that would be useful to know as well.
* Back in your form, you may or may not have a pane to the right that shows various style rules. If not, click the Style button at the lower right to open it. Look for any rules with the '''white-space''' property (the properties normally appear in colored text). If you find one, right-click and choose Copy declaration line. Switch back to this tab and paste the rule.
With that information, hopefully we can find a workaround.

Trying to configure Portal to run off the network

Similar Messages

Maybe you are looking for