Trying to connect Macbook Pro and IMac...suggestions?

Trying to connect Macbook Pro and IMac with Apple Remote desktop or a cable. They do share a wifi router.
Thanks much!

not sure if you found an answer to this. I just got a mb pro and want it to connect to my imac (late 2009). I set up sharing on hte imac, file sharing and dvd/cd sharing. from the mbpro i simply went to finder>go>connect to server. I entered the name as on my imac (xxx.local) and immediately connected. This was a massive help to me as I had some software (aperture, office for mac) that were on drive and the new mbpro doesn't have a disk drive. through sharing I could access the disc drive remotely via my mbpro and load the software that way. worked beautifully on my wifi (which is apple airport extreme).
Hope this helps.

Similar Messages

MacBook Pro and iMac keep losing wireless internet connection.

Greetings all, two weeks ago I purchashed a MacBook Pro and iMac and they've worked fine, except for the internet. The wireless randomly goes out, but the airport bars remain. At first I thought it was just pages having trouble loading because of the OS (stupid I know) It's been happening more and more frequently and the only way to solve it is to turn the Airport off and then on which allows the internet to reconnect. My wireless router is connected to an HP an the router is a Dlink 1310 wireless G router. Any help would be greatly appreciated.

Hi all,
It seems I am not alone. There is a very strange problem either with my brand new unibody MacBookPro 17" or the Airport Extreme I am using to connect to the Internet via a cable connected router. The router I am using is Billion 7300 and works fine, and I can even connect to the wireless access via the router and all works fine. I am using Airport Extreme to extend the access area in my house and also use a USB drive for storage attached to the AirportExtreme. The funny thing is that the first couple of weeks I had no problems with the MacBookPro going on the Internet via the Airport. At that time I had the wireless part of the Billion modem disabled so as to avoid possible interference. Suddenly, one day about a week or so ago, the MBP would connect first time to the wireless Airport and to the Internet for only about a few seconds and then no update on any of the web pages. I was suspecting first my ADSL, but that was all along OK. The signal strength to the Airport is strong, but just the connection to the Internet is no longer available. Strange thing is I have in the same room a 24" iMac and this is still connected to the Internet via the Airport with no problems. Same settings on both! I tried everything I could think off on the Airport, tweaked, changed, reset and created new connection - but without any luck. It is as if the Airport decided to just block the MBP for whatever reason. I also have the Little Snitch, which I disabled too.
I was hoping that the latest Leopard 10.5.7 would have a fix for such a behaviour, but no change.
I cannot make any conclusion as everything contradicts: if the MBP wireless has a problem, I wouldn't be able to connect to the Billion wireless; if the Airport is at fault I should not be able to connect to it with the iMac. I go to work where other two brands of wireless hot-spots I use (D-Link and Billion 7402) and I have no problems swicthing between the two. It seems only Apple's Airport is a problem for my new MBP.
It must be something in the software of the Airport or MBP ?!?!?
APPLE, PLEASE HELP, THIS IS ANNOYING.
I already spent three days trying to solve a problem that should be 'No Brainer" according to the Apple's design books. But I do have a problem that I did not know about before.
Thank you in advance for any suggestions.
Vlado Damjanovski, Sydney.

AE ppoe mode in AE only allows macbook pro and iMac to connect to internet but not ipad

I just upgraded to 20MB DSL line and got a new Qwest Q1000 modem connected to an A Extreme.
Since Qwest now has PPPoE, I set the Q1000 modem to bridge mode and turned off Wifi.
Then I Set the AEx router to ppoe mode, entered my username and password from Qwest and all is well with all lights green.
But... only my imac and macbook pro connect to the internet. My ipad, my wife's macbook and an ipod touch cannot connect.
According the Airport Utility, all these devices are detected by the wifi network and they have their own unique IPs provided by the AEx router (in pppoe mode) 10.0.1.7, 10.0.1.9 and so forth, no ip conflicts detected, all the lights green with full access to the internet. Again, only my iMac and my macbook pro actually connect to the internet at full speed.
Does any one know why some devices connect to the internet while others are not able to...
Again, no errors detected anywhere, all modem and router lights green.
Any help is welcomed.
Janickk

Thanks for the reply. Your suggestion did not work. Apparently there is an issue with DNS addresses.
The Airport Extreme in pppoe mode sets the router and DNS addresses to be the same 10.0.1.1. Some devices (like my macbook pro and iMac) ignore this DNS value or use a different (unknown) and then they connect to the internet perfectly. But the devices (ipads and ipods) aquire and set both values (Router and DNS) to be the same, (10.0.1.1 and 10,0.1.1) wont connect to the internet until I manually changed the DNS address in the DNS field.
Question: are these two values supposed to be the same/different/ in both fields in the AExt in pppoe mode?
Thanks
Janickk

My new MacBook Pro and Imac can't recognize my digital video camera (Canon GL2) via FireWire 800 9 pin to 4 pin cable.

My new MacBook Pro and Imac can't recognize my digital video cameras (Canon GL2 or Sony) via FireWire 800 9 pin to 4 pin cable. I've tried two different cables. Any suggestions? Thanks.

Is your DV camera plugged in to AC power (not batteries only)? When you step down from 9 pins to 4 pins, you lose the "power" pins.

Synchonising files between Macbook pro and iMac

I have a 6 year old Macbook Pro. It has a number of files in the Documents folder which are unique. I want to sell it but before I do so I want to transfer just the unique files across to my iMac. Is there software that will let me do this? The documents directory is 15 GB in size.

Michael Haffey wrote:
Yesterday I connected my Macbook Pro and iMac using a Firewire cable.
Did you start the MBP in FW Target Disk Mode?
<http://docs.info.apple.com/article.html?path=Mac/10.6/en/8443.html>
I also tried plugging an Ethernet cable connecting each system directly to the other
Did you follow the instructions correctly?
<http://docs.info.apple.com/article.html?path=Mac/10.6/en/8429.html>
Presumably you have a home LAN. Why don't you connect like that—it's the easiest thing option.

Can I use Mac Mini as a "server" for a MacBook Pro and iMac?

I want to develop a simple system for accessing my files from multiple devices.
I heavily use iTunes (190 GB), iPhoto (120 GB) and iMovie (30 GB, but want to do more when I get time). Additionally, I store lots of old videos on circa 10 portable hard drives (1 TB each), which I access occasionally.
The family use all this content and we currently have a MacBook Pro and are considering buying a new computer - either a new MacBook Pro or an iMac. We also have iPads, iPhones etc and a Time Capsule. We use wireless fibre optic broadband.
I don't really want multiple iTunes and iPhoto libraries. We want all our music and pictures in single master libraries that we can all access and update.
As there is seemingly too much data to store on iCloud, we need to find an alternative solution.
My possible solution is:
(1) Load my master iTunes, iPhoto and iMovie libraries ("iTPM libs") on a Mac mini
(2) Buy a new MacBook Pro or iMac (probably doesnt matter which)
(3) Link the MacBook Pro(s) and iMac to the Mac mini to access iTunes, iPhoto and iMovie and the master iTPM libs
(4) Plug the portable hard drives into the Mac mini whenever I need to access the video content stored on the portable hard drives
(5) Add "users" to the system (i.e. family members), in the same way you would access a shared server at work
(6) Over time, buy more computers to access the system in the same way
My questions are:
(1) Is this system feasible?
(2) If so, can I edit the iTPM libs from the MacBook Pro or iMac?
(3) If so, what happens if both the MacBook Pro and iMac are accessing the libraries at the same time? Which takes precedent?
(4) Would this solution be significantly slower than having separate libraries on the different computers?
(5) Is there an alternative approach that might work better for my needs? (which are, after all, relatively straight forward). When I went to the Apple store they were unsure!
Many thanks.

I heavily use iTunes (190 GB), iPhoto (120 GB) and iMovie (30 GB, but want to do more when I get time). Additionally, I store lots of old videos on circa 10 portable hard drives (1 TB each), which I access occasionally.
The family use all this content and we currently have a MacBook Pro and are considering buying a new computer - either a new MacBook Pro or an iMac. We also have iPads, iPhones etc and a Time Capsule.
[…] We want all our music and pictures in single master libraries that we can all access and update.
The "update" portion of this is where your problems will arise. You'd be better to consider your proposed system initially in terms of content "consumption", before getting into the nitty-gritty of editing shared content.
iTunes has the Home Sharing feature built-in, which solves the content consumption issue.
I don't know anything about sharing iPhoto libraries, but this KB article looks useful.
As for iMovie, I think there are two things you want to do: share the raw data (sound effects, music, photos etc.) that are used to create iMovie content; and share the finished results. Is that right? I'm not sure how you'd go about doing that, but if you clarify your aims in this regard, it'll help the next person who comes along.
When it comes to updating content, such as adding new music to iTunes or iPhoto, I'd suggest you do it through the Mac mini directly. This seems the least problematic solution. You wouldn't necessarily need a dedicated display for the Mac mini - you could use remote desktop or VNC or what-have-you.
As for speed: doing anything across a network is always going to be slower than doing it locally. But, it probably won't matter for content consumption (though if you're all watching different movies at the same time the drives on the server may struggle, and the wifi bandwidth might be tight).
I hope this represents a good initial response to your query.

File sharing permissions issue between Macbook Pro and iMac

Hi,
I'm having trouble sharing files to and from a Macbook Pro and iMac. Both are brand new, and connected via a firewire cable (Due to large file sizes)
I can share files between both computers no problem, but the files are set to 'Read only' by default once moved to the over device and can't be moved or renamed without requiring a password every single time.
Is there a way to totally share files without having to enter a password every time I want to move or rename it?
> File sharing is turned ON on both computers.
> Share files and folders using AFP is ticked
> Share files and folders using SMB is ticked also.
Thanks

Try disabling SMB File Sharing, & in the Sharing Pref Panes>Sharing>Options, see what users are listed.
Also, try logging into the other Mac with the Other Mac's username & PW, not using the name & PW of the one you're on.

Can i remotely share files between macbook pro and iMac

Want to know if I can do remote file sharing between macbook pro and imac.

Yes, absolutely. She can access her iMac from anywhere that has an Internet connection. If Screen Sharing is enabled, she can log in and use it as if she were seated at the iMac.
Provided the iMac's router supports the Bonjour Sleep Proxy (obviously all Apple AirPort Base Stations do), the iMac can even be asleep, and BTMM will wake it upon the router receiving a request to access the iMac.
The speed of her available Internet connection will be a limiting factor. Slower connections will be a bit laggy.
Her iMac will appear in a Finder Sidebar, under "Shared".

Can I download FCE 4 onto my macbook pro and imac?

Can I download FCE 4 onto my macbook pro and imac? I have it on the macbook pro already and want to put it on my new mac, can it be done?

Can I download FCE 4 onto my macbook pro and imac?
Yes, you can install it on both. You can't have it running on both computers at once unless you have two licenses for it.
(38491)

HT3275 Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

Time Machine on Macbook Pro and iMac both running 10.7.4 don't react the same. Macbook Pro runs back every hour even if asleep, and iMac only when it's awake. Why?

I thought the backup whilst asleep was only used on Mountain Lion.. but perhaps it was also introduced with Lion.. anyway it is only enabled on later firmware.. in latest laptops.
http://reviews.cnet.com/8301-13727_7-57480490-263/mountain-lions-powernap-featur e-requires-firmware-update/
A quick google finds all sorts of info.. remember google is your friend.

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

I am running Lion on both my Macbook Pro and iMac. Outlook 2011 bombs out and does not even open on my iMac but works perfectly on my Macbook Pro. Help please.

Check for updates by running MS Office Update directly from:
/Library/Application Support/Microsoft/MAU2.0/Microsoft AutoUpdate.app
(Open Finder, ⇧⌘G, paste in the above and click)

MacBook Pro and iMAC Software update

I need some help from my Apple Junkies.... So both my MacBook Pro and my iMAC are showing that there is new software that needs to updated which are apart of the OS X 10.9.4 update combo, take it my computer is updated to 10.9.4 but in the app update section it shows I need yo update the iTunes 11.4, iBook 1.0.1 and Safari 7.0.6... Now when you look at the bottom of the updates at the "Updates installed in the last 30 days" all of the above are updated.
But the issues are: I can't get rid of that red 1 for updates (yes I've tried putting the time into the future 6 months and longer no help) and
I'm trying to restore my iPad and Apple TV which neither MacBook Pro or iMac are allowing it because it is saying unable to connect to network which clearly I'm connected to the internet... I'm using Verizon for home internet as well.
- I've tried installing the above individually but it keeps saying calculating yet no movement left it up for over 24 hours with numerous reboots... about ready to throw both out the window..

My guess is Google did something wrong, figured it out and fixed it. The suggestions feature went away in Safari for Google, but not for bing, and continued to work in Firefox. It is all fixed this morning. I happened to be using Google when it stopped functioning, it had nothing to do with updates to the Mac, since as it went south I restarted in an earlier Snow Leopard version and discovered it was not working there either. So it was a Google action that caused the mishap, nothing that Apple did. Anyway, all's well now.
Francine

File Sharing between macbook pro and imac

Hello,
I'm having trouble with file sharing between my bankbook pro and my new iMac. I want to share some photos on my iPhoto library from my macbook pro and transfer them to my iMac. I've turned on file sharing and tried connecting, entered in my username and password, but it won't connect. I've tried several times with the correct username and password combination, and the box just shakes and denies entry. I've even tried connecting as a guest user and it says "access is denied, contact system administrator." Can anyone help? I've upgraded to Yosemite on both computers.
Thanks in advance.

I've done everything that you've recommended, however, I am still having trouble sharing files between my macbook and iMac. I even tried using airdrop to transfer files, but nothing seems to be working. I've made sure the firewall options are what they're supposed to be and everything. Whenever I try to login as administrator to file share, it won't accept my password. I don't know why airdrop isn't working either.

10.5.8 update corrupted the Volume Structure of my MacBook Pro and iMac

After installing the 10.5.8 update on my Macbook Pro AND my iMac, BOTH computers refuse to boot up. If I boot from a TechTool Deluxe DVD and run the system scan, It fails both the Directory Scan and the Volume Structure test. The only common application on these computers is the Fusion PC emulator. I was reading that the newest update fixed problems with this application. PLEASE HELP!!!

Some general advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site.
The Combo updater of Leopard 10.5.8 can be found here:
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Firefox installs on my macbook air but won't open - this is weird because it works fine on my macbook pro and imac

I have an iMac, MacBook Pro and MacBook Air. Until recently Firefox worked fine on them all and was my default web browser. Suddenly and with no other indications, FF wouldn't load on my MacBook Air. The opening sequence commences but hangs up with a "loading" indication. I have tried uninstalling FF with CleanMyMac and reinstalling. All is fine until I attempt to open FF when again I get a hang up with the "loading" indication. FF is still working fine on my iMac and MacBook Pro. Weird or what!

I have that problem too! Have anyone figure it out?
Help!!
;)

Trying to connect Macbook Pro and IMac...suggestions?

Similar Messages

Maybe you are looking for