Trying to create a brush to watermark my photos. HELP!!

So, Im trying to create a brush to watermark my photographs, but the 'define brush preset' isnt clickable, but it is clickable with any other photo i try it with. What am i doing wrong? can someone please help me? It's quite frustrating.

Haw large in Pixels is the image?
And quite frankly I would recommend creating a Path and using »Embed Path« instead of a Brush as Actions that include Paths can be more easily transferred without the risk of forgetting the Brushes.

Similar Messages

I I am trying to create a collage with 4-6 photo so I can print them on one sheet. Can this be done in IPHOTO?

I am trying to create a collage with 4-6 photo so I can print them on one sheet. Can this be done in IPHOTO?

Here are 3 options for future reference:
1. With the setup you've described, apply a Match Move behavior to the text and make the rectangle the source. Change the Transform parameter to Mimic source. This way you can still adjust the text postion as needed, but the rectangle will drive the animation.
2. Use a group to do the animation. Put both your rectangle and text in the same group and animate the group's postion.
3. Use the Link behavior.
Each of these has it's advantages depending on what you need.

Trying to create a Invoice based on Order need help Error -5002

the dreaded -5002 error is haunting me too! and I could not find a matching solution for this in the forum....
I need help quickly on this. I am trying to create invoices for some orders so the Base - Target relationship is retained. The orders I pick are all Open (DocStatus   = O and the lines are all Open LineStatus = O)
here is my code
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'adding Line
oInvoice.Lines.Add
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If

Indika,
Only set your base types...
(not items & description)
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 0
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00001"
oInvoice.Lines.ItemDescription = "IBM Infoprint 1312"
'adding Line (to fill the second item line)
' the 1st line item is there by default
oInvoice.Lines.Add
oInvoice.Lines.BaseEntry = 48
oInvoice.Lines.BaseLine = 1
oInvoice.Lines.BaseType = SAPbobsCOM.BoObjectTypes.oOrders
oInvoice.Lines.ItemCode = "A00002"
oInvoice.Lines.ItemDescription = "IBM Inforprint 1222"
'DO NOT Add THIS line
' (only if you want to add a 3rd line item)
'''oInvoice.Lines.Add -> Don't add this
lRetCode = oInvoice.Add
If lRetCode <> 0 Then
    gObjCompany.GetLastError lErrCode, sErrMsg
    MsgBox (lErrCode & " " & sErrMsg)
End If
remember to add :
oInvoice.CardCode = "your BP"
oInvoice.DocDueDate = Now
oInvoiceDoc.CardCode = txtDOCBPCode.Text

Trying to create object of a class within servlet - help!!

I have created and compiled the following classes within
C:\bea\wlserver6.1\config\mydomain\applications\DefaultWebApp\WEB-INF\classes
1)LoginServlet
2)LoginManager
3)I have LoginServlet trying to create an object of type LoginManager, very simple,
but I get the following errors:
Cannot resolve symbol: LoginManager lm = new LoginManager();
^
Cannot resolve symbol: LoginManager lm = new LoginManager();
^
4)I have the .java and .class files located within the same directory, so I don't
see what's wrong here??? HELP!
LoginManager looks like:
public class LoginManager {
public boolean authenticateUser(String username, String password){
          boolean status = false;
//simple code for string matching
          return status;
LoginServlet looks like:
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class LoginServlet extends HttpServlet {
     // Constructors
     // Variables
     public static final String CONTENT_TYPE = "text/html";
     public boolean LOGIN_STATUS;
     // Methods
     public void service (HttpServletRequest req, HttpServletResponse res)
          throws IOException {
          String username = "";
          String password = "";
          LoginManager lm = new LoginManager();
          username = req.getParameter("username");
          password = req.getParameter("password");
          LOGIN_STATUS = lm.authenticateUser(username, password);
          res.setContentType(CONTENT_TYPE);
          PrintWriter out = res.getWriter();
          out.println("<html><head><title>Hello World</title></head>" +
                         "<body>Hello! Your login status is " + LOGIN_STATUS +
                         "</body>" +
                         "</html>");
     public void init (ServletConfig config) throws ServletException {
          super.init(config);

Do you have . in the CLASSPATH when compiling your servlet?
ron <[email protected]> wrote:
I have created and compiled the following classes within
C:\bea\wlserver6.1\config\mydomain\applications\DefaultWebApp\WEB-INF\classes
1)LoginServlet
2)LoginManager
3)I have LoginServlet trying to create an object of type LoginManager, very simple,
but I get the following errors:
Cannot resolve symbol: LoginManager lm = new LoginManager();
^
Cannot resolve symbol: LoginManager lm = new LoginManager();
^
4)I have the .java and .class files located within the same directory, so I don't
see what's wrong here??? HELP!
LoginManager looks like:
public class LoginManager {
public boolean authenticateUser(String username, String password){
          boolean status = false;
//simple code for string matching
          return status;
LoginServlet looks like:
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class LoginServlet extends HttpServlet {
     // Constructors
     // Variables
     public static final String CONTENT_TYPE = "text/html";
     public boolean LOGIN_STATUS;
     // Methods
     public void service (HttpServletRequest req, HttpServletResponse res)
          throws IOException {
          String username = "";
          String password = "";
          LoginManager lm = new LoginManager();
          username = req.getParameter("username");
          password = req.getParameter("password");
          LOGIN_STATUS = lm.authenticateUser(username, password);
          res.setContentType(CONTENT_TYPE);
          PrintWriter out = res.getWriter();
          out.println("<html><head><title>Hello World</title></head>" +
                         "<body>Hello! Your login status is " + LOGIN_STATUS +
                         "</body>" +
                         "</html>");
     public void init (ServletConfig config) throws ServletException {
          super.init(config);
Dimitri

Trying to create install script in PackageMaker...help for newbie

Hello,
I am trying to deploy a solution as an install package. Currently, there are 3 items inside the folder that needs to be installed in the /Applications folder. This in itself is easy. However, when I create upgrades to the solution, I want to carry over one file from the previous installation to the new one. Is there a way to have this upgraded version install and instead of removing all of the earlier files, can it install the new files (which are 3) and carry over 1 of the other files.
I hope this makes sense. Thanks for any input or sample scripts that I may be able to modify to accomplish this.
Thanks,
Stephen

Thanks for your time!
Perhaps it would help if I explain a little further my situation and what I am trying to accomplish.
I have a database runtime solution that I want to distribute. I have all of the necessary files in a single folder, let's say, named "Progam 1.2". Since whenever I upgrade this version, I need to have the old data file from the previous version on hand to import into the new file, I create a new folder called "Program 1.3" So after the installation, I would have both folders. The user then opens the new version and the program then will import the previous versions data. At that point the user may delete the previous version folder entirely.
My question is how can accomplish an install so that the new version will not overwrite the previous folder "Program 1.2" when installing the upgrade to "Program 1.3" since I need the data file for updating the data. Ideally, I would love to have the new folder installed and the single data file in the previous version folder be copied to the new versions folder and be renamed to "Previous Data" so that the new version can update the data.
Again, I am a complete newbie in this arena and have simply been doing DMG files where the user copies the new version to the applications folder. But if there was a way to automate this installation more, I would like to do that.
Thanks again for your help!
Stephen

Trying to create a Field Validation Expression and need help

I have a picklist field and another field that are in question. I want to set some sort of rule that forces the second field to be populated only If specific values are selected from the picklist field.
I was going the route of a field validation Rule, but everything i've tried so far does not produce the results i am trying to achieve.
The first type of expression i tried was:
([<plProduction_Print_Account_Category_ITAG>] <> LookupValue("OCC_CUST_LOV_ACCOUNT_1", "No Production Print") AND ([<stSIC_Code_ITAG>] IS NULL))
This is generating the field validation error message when i select any of the correct values from the picklist. the problem is still the second field, which will generate the error if a value is entered into the second field, regardless of the picklist value selected. Switching the "IS NULL" to "IS NOT NULL" only reverses the problem on the second field, causing the error to generate when the second field is updated to a NULL or blank value.
I also tried :
= 'No Production Print' AND [<stSIC_Code_ITAG>] IS NOT NULL
and got similar results.
([<plProduction_Print_Account_Category_ITAG>] = LookupValue("OCC_CUST_LOV_ACCOUNT_1", "No Production Print"))
Similar results as well.
Does this need to be an IIF statement? Do I need to make this a workflow expression instead? i could really use some help as I have tried everything i can think of and admit, i'm not the expression guru!!!. Any assistance would be appreciated.
TeknoMan

Yes we have the same request and we used the following expression. Example we have a field "Método de pago" ( [<plMtodo_de_pago_ITAG<]), it's values are "CHEQUE and DEPOSITO" if we select DEPOSITO three more fields were requiered Route, Sucursal de banco and Clabe so we have to put this validation in the four fields including Metodo de pago.
[<plMtodo_de_pago_ITAG>] <> "DEPOSITO" OR ([<Route>] IS NOT NULL AND [<nSucursal_de_banco_ITAG>] IS NOT NULL AND [<stCLABE_ITAG>] IS NOT NULL)
well in the field CLABE we put the following [<plMtodo_de_pago_ITAG>] <> "DEPOSITO" OR ([<Route>] IS NOT NULL AND [<nSucursal_de_banco_ITAG>] IS NOT NULL AND [<stCLABE_ITAG>] IS NOT NULL AND Len([<stCLABE_ITAG>])=18) this was because the len of the value must be 18 characters.
I hope this works for you
Regards Catalina Valadez
Edited by: CatalinaV on 12/03/2009 10:54 AM
Edited by: CatalinaV on 12/03/2009 10:55 AM

Trying to create a contact sheet for passport photos....HELP!

Aperture 3 and iMac are both new to me and after a lot of research, I finally figured out how to make a contact sheet for my passport photo so that I don't have to pay 10.00 for a measly 2x2 photo at Walgreen's. I went to file>print>selected the 8x10 borderless size and adjusted the picture so that I would be able to print 20 2x2 photos on one sheet. PERFECT....but....I don't really want to print it myself ( I don't have any photo paper right now )...I want to SAVE the image I created and upload it to Walgreen's so that they can print it. Then, I will cut out the 2x2 photo that I need. The only problem right now is that I cannot figure out how to SAVE the image to my computer, either in iPhoto or Aperture 3. If anyone knows, can you please help me out with this. OR if there is another way to create the image in another area of Aperture 3 I would like to know how!
Thanks for any help you can provide

Once in print after you have the layout you want select the Print button. This will bring up the system print window (not actually print the image yet).
At the bottom of the new window is a button PDF select that. From that pulldown you can elect to save the print image as a pdf or better yet for your need you can save as a JPG (or TIFF)
Once you have it saved as a JPG you can upload to Walgreen;s

Error message when trying to create a new account (was: Hi, need help)

Hi, I need your help, I have come across a problem, I want to create a new account, but the problem is with the server Developer Toolbox concern, but we are not in memory

How come Leopard let me use the WGM in standard mode?
While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
Yes.

I'm new to Photoshop CC and trying to create a collage with 16 pictures. Help

I need help in creating a collage with 16 pictures.

So you created a document 192000 pixels wide, and 108000 tall, and set the type to be 2 inches tall. Yes, the type is going to take a few minutes to render in that document.
Yes, you created a document much bigger than you probably intended (you probably wanted 1920 PIXELS by 1080 PIXELS).
Pixels and inches are not the same, and you need to pay attention to the units.

I keep getting an error message when i am trying to create and send a contract... help?

(echosign_dev1__SignatureType__c: echosign_dev1__SIGN_Agreement__c: bad field names on insert/update call: echosign_dev1__SignatureType__c, echosign_dev1__Opportunity__c, echosign_dev1__Cc__c, echosign_dev1__Recipient__c)
This is the error message I keep getting.. all the app permisions are correct as from what i have found in ebooks and other sources.. Please help!

Hi,
I believe you have been contacted by support directly.
You were missing field level permissions on the agreement object. You needed to expose all agreement field level access to the effected profiles.

I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo

I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo several times, when I go to create the preset the adjustment brush is not an option to check. How do I add the adjustment brush to the develop presets. Thanks Ron.

The adjustment brush cannot be added to a develop preset.
If you can replace the adjustment brush with a gradient filter or radial filter, you can add those to a dev preset.
If a gradient filter or radial filter is not an option for you, you can at least create an adjustment preset to remember your brush settings.

Logical standby stopped when trying to create partitions on primary(Urgent

RDBMS Version: 10.2.0.3
Operating System and Version: Solaris 5.9
Error Number (if applicable): ORA-1119
Product (i.e. SQL*Loader, Import, etc.): Data Guard on RAC
Product Version: 10.2.0.3
logical standby stopped when trying to create partitions on primary(Urgent)
Primary is a 2node RAC ON ASM, we implemented partitions on primar.
Logical standby stopped appling logs.
Below is the alert.log for logical stdby:
Current log# 4 seq# 860 mem# 0: +RT06_DATA/rt06/onlinelog/group_4.477.635601281
Current log# 4 seq# 860 mem# 1: +RECO/rt06/onlinelog/group_4.280.635601287
Fri Oct 19 10:41:34 2007
create tablespace INVACC200740 logging datafile '+OT06_DATA' size 10M AUTOEXTEND ON NEXT 5M MAXSIZE 1000M EXTENT MANAGEMENT LOCAL
Fri Oct 19 10:41:34 2007
ORA-1119 signalled during: create tablespace INVACC200740 logging datafile '+OT06_DATA' size 10M AUTOEXTEND ON NEXT 5M MAXSIZE 1000M EXTENT MANAGEMENT LOCAL...
LOGSTDBY status: ORA-01119: error in creating database file '+OT06_DATA'
ORA-17502: ksfdcre:4 Failed to create file +OT06_DATA
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
LOGSTDBY Apply process P004 pid=49 OS id=16403 stopped
Fri Oct 19 10:41:34 2007
Errors in file /u01/app/oracle/admin/RT06/bdump/rt06_lsp0_16387.trc:
ORA-12801: error signaled in parallel query server P004
ORA-01119: error in creating database file '+OT06_DATA'
ORA-17502: ksfdcre:4 Failed to create file +OT06_DATA
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
ORA-15001: diskgroup "OT06_DATA" does not exist or
Here is the trace file info:
/u01/app/oracle/admin/RT06/bdump/rt06_lsp0_16387.trc
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
With the Partitioning, OLAP and Data Mining options
ORACLE_HOME = /u01/app/oracle/product/10.2.0
System name: SunOS
Node name: iscsv341.newbreed.com
Release: 5.9
Version: Generic_118558-28
Machine: sun4u
Instance name: RT06
Redo thread mounted by this instance: 1
Oracle process number: 16
Unix process pid: 16387, image: [email protected] (LSP0)
*** 2007-10-19 10:41:34.804
*** SERVICE NAME:(SYS$BACKGROUND) 2007-10-19 10:41:34.802
*** SESSION ID:(1614.205) 2007-10-19 10:41:34.802
knahcapplymain: encountered error=12801
*** 2007-10-19 10:41:34.804
ksedmp: internal or fatal error
ORA-12801: error signaled in parallel query server P004
ORA-01119: error in creating database file '+OT06_DATA'
ORA-17502: ksfdcre:4 Failed to create file +OT06_DATA
ORA-15001: diskgroup "OT06_DATA" does not exist or is not mounted
ORA-15001: diskgroup "OT06_DATA" does not exist or
KNACDMP: *******************************************************
KNACDMP: Dumping apply coordinator's context at 7fffd9e8
KNACDMP: Apply Engine # 0
KNACDMP: Apply Engine name
KNACDMP: Coordinator's Watermarks ------------------------------
KNACDMP: Apply High Watermark = 0x0000.0132b0bc
Sorry our primary database file structure is different from stdby, we used db_file_name_convert in the init.ora, it look like this:
*.db_file_multiblock_read_count=16
*.db_file_name_convert='+OT06_DATA/OT06TSG001/','+RT06_DATA/RT06/','+RECO/OT06TSG001','+RECO/RT06'
*.db_files=2000
*.db_name='OT06'
*.db_recovery_file_dest='+RECO'
Is there any thing wrong in this parameter.
I tried this parameter before for cloning using rman backup. This din't work.
What exactly must be done? for db_file_name_convert to work.
Even in this case i think this is the problem its not converting the location and the logical halts.
help me out.....
let me know if you have any questions.
Thanks Regards
Raghavendra rao Yella.

Hi reega,
Thanks for your reply, our logical stdby has '+RT06_DATA/RT06'
and primary has '+OT06_DATA/OT06TSG001'
so we are using db_file_name_convert init parameter but it doesn't work.
Is there any thing particular steps hiding to use this parameter? as i tried this parameter for rman cloning it din't work, as a workaround i used rman set new name command for clonning.
Let me know if you have any questions.
Thanks in advance.

Need help with creating a brush

Hi guys,
I wanted to ask for help with creating a brush (even a link to a tutorial will be goon enough ).
I got this sample:
I've created a brush from it, and i'm trying to get this kind of result:
but it's only duplicates it and gives me this result:
Can someone help me please understand what i need to define in order to make the brush behave like a continues brush instead of duplicate it?
Thank you very much
shlomit

what you need to do is make a brush that looks like the tip of a brush. photoshop has several already but you can make your own that will be better.
get a paintbrush and paint a spot kind of like what you did but dont paint a stroke. make it look kindof grungy. then make your brush from that, making sure to desaturate it and everything.
EDIT:
oh, and if you bring the fill down to like 10-20% your stroke will look better

Problems creating a brush

I'm trying to make an expanded object into a brush, but I keep getting an error message that there's an element that can't be used in a brush.
The object contains 6 images with a clipping mask and a warp from the envelope distort tool, but then I expanded everything, so it should work fine, right? I'm not sure what the problem is.
I tried Scattered Brush, Pattern Brush, and Art Brush and got the same error message for all of them.

Have you verified there are no clipping masks in the expanded artwork? You can view the artwork in the Layers panel or choose: Select>Object>Clipping Masks to locate the possible culprit. Also, brushes cannot contain gradients, in case any are present.
And from my experience, I would suggest saving your original artwork as a Symbol, then expand the symbol to create the brush. That way you alway have the original artwork to return to.

Create a brush with objects Ai with styles raster or symbols.

Hi!
The Ai added to create brushes from images is a very long-awaited performance for me.
Thank you very much.
But I have two problems that I can still perform at Ai. I would like to be sure that it is not the fault of my knowledge about the new features Ai.
I would be grateful for suggestions
A. If I create brushes with images, can I create brushes with Ai objects with shadows without screening or gradients?
B Often, I would like to use a symbol created in Ai to create a brush.
I understand that, despite new developments currently Ai still allows you to create brushes with symbols?
Attached is a sample file Ai object. Highlighted in the preview as No. 2
http://cl.ly/3Y0J252a0p0B
Best Regards!

Thanks.
A circle is easy enough, sure, but I would like to make all
kinds of curves in that circle actually. Everyone knows about
rotating a basic circle. This is beyond that. Imagine all kinds of
turns, waves and spirals in that line.
I have tried Illustrator, and there's potential solutions
there... like the text-on-path tool (why doesn't Flash have that
yet?) which works fantastic. Still a lot of manual work, and will
be a ton of manually copied frames. I wanted something more
efficient.

Trying to create a brush to watermark my photos. HELP!!

Similar Messages

Maybe you are looking for