I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo

I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo several times, when I go to create the preset the adjustment brush is not an option to check. How do I add the adjustment brush to the develop presets. Thanks Ron.

The adjustment brush cannot be added to a develop preset.
If you can replace the adjustment brush with a gradient filter or radial filter, you can add those to a dev preset.
If a gradient filter or radial filter is not an option for you, you can at least create an adjustment preset to remember your brush settings.

Similar Messages

Some of the songs I have downloaded onto i tunes won't play when I select it to do so. The error message I get is "The song could not be used because the original file could not be found. Would you like to locate it?" How can I get my songs to play?

Some of the songs I have downloaded into i tunes won't play when I select it to do so. The error message I get is "The song can not be used because the original file can not be found. Would you like to locate it?" When I select yes I'm sent to a screen that has my i tunes library listed. When I select the song in question I'm asked if I would like to open the song. When I select this option I get nothing. The songs I have downloaded must be somewhere because they are listed in my i tunes library and on the screen I've been sent to. I can't the songs to play however. This is not true of all of my songs but it is true of quite a few of them. Actually, one song is too many. How do I get my music to play that seems to be locked up somewhere in the computer?

Presuming they're on your computer, right click on them and then follow the prompts to locate hte file on your computer.

The camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

the camera app on my iphone 4S is crashing and while using the rear video cam black wavy lines are appearing but only when exposed to flurescent light in addition to the front cam... can any one please tell me what is happening???

Try resetting your phone by holding down the home and off button until the apple symbol comes up. Then if still doing, restore your phone in itunes from your backup.

One of the 7's results that I don't like is the ablitly to Move and Scale a photo that I want to use as wallpaper. Last version had this. Techie i spoke with said that there was a product feedback site on here to comment on this, but I can't find it.

One of the features that I miss since uploading 7 is the ability to "Move and Scale" a photo that I want to use as wallpaper. Techie I spoke with said that I should post this on Product Feedback, but I can't find that.

Sorry.
Try this: http://www.apple.com/feedback/iphone.html

I am new to using Oracle, and I am trying to create an add/insert stored pr

I am new to using Oracle, and I am trying to create an add/insert stored procedure for a table. The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?
Table definition:
CREATE TABLE DCWEB.USER_PLAN_PREFERENCE
USERID VARCHAR2(40) NOT NULL,
PROD_CD VARCHAR2(9) NULL,
PLAN_CD VARCHAR2(9) NULL,
STATE_LST VARCHAR2(2) NOT NULL,
STATE_NM VARCHAR2(40) NOT NULL,
LST_UPDATE_TS TIMESTAMP(6) DEFAULT CURRENT_TIMESTAMP NOT NULL
ALTER TABLE DCWEB.USER_PLAN_PREFERENCE
ADD CONSTRAINT USER_PLAN_PREFERENCE_XPK PRIMARY KEY (USERID, PROD_CD, PLAN_CD);
-- Grant/Revoke object privileges
grant select, insert, update, delete on DCWEB.USER_PLAN_PREFERENCE to HIGGIB1;
Stored Procedure Definition:
procedure setUserPlanPref (
userid in varchar2,
prod_cd in varchar2,
plan_cd in varchar2,
state_lst in varchar2,
state_nm in varchar2
is
currentTimestamp timestamp := current_timestamp;
begin
insert into user_plan_preference (userid, prod_cd, plan_cd, state_lst, state_nm, lst_update_ts)
values (upper(userid), upper(prod_cd), upper(plan_cd), upper(state_lst), upper(state_nm), currentTimestamp);
commit;
exception
when dup_val_on_index then
begin
update user_plan_preference up set
up.userid = upper(userid),
up.prod_cd = upper(prod_cd),
up.plan_cd = upper(plan_cd),
up.state_lst = upper(state_lst),
up.state_nm = upper(state_nm),
up.lst_update_ts = currentTimestamp
where up.userid = upper(userid)
and up.prod_cd = upper(prod_cd)
and up.plan_cd = upper(plan_cd);
commit;
exception
when others then
rollback;
end;
when others then
rollback;
end;
end;
INPUT DATA
I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.

938319 wrote:
I am new to using OracleWelcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and ensure you've updated your profile with a real handle instead of "938319".
You'll get a faster, more effective response to your questions by including as much relevant information as possible upfront. This should include:
<li>Full APEX version
<li>Full DB/version/edition/host OS
<li>Web server architecture (EPG, OHS or APEX listener/host OS)
<li>Browser(s) and version(s) used
<li>Theme
<li>Template(s)
<li>Region/item type(s)
With APEX we're fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
Thanks for posting the complete code, it makes it so much easier to understand the problem, but always post code wrapped in tags<tt>\...\</tt> tags to preserve formatting and special characters.
and I am trying to create an add/insert stored procedure for a table.Does this have anything to do with APEX, for which this is the forum? General SQL &amp PL/SQL matters should be directed to the {forum:id=75} forum.
The PROD_CD and PLAN_CD fields in my table can have no value (empty or null) Can you please check my code and let me know what I am doing wrong?This:
commit;
exception
when others then
rollback;
end;
when others then
rollback;Remove it all.
Commits should be issued by end user/client software on completion of a transaction. This means <tt>commit;</tt> should almost never appear in PL/SQL code. The main exception to this is in <tt>dbms_job/secheduler</tt> scheduled processes that have no client or UI. If this code is executed from APEX, then APEX issues more than enough commits anyway.
exceptions are just a way of ensuring your code is buggy.<tt>when others</tt> exceptions are just a way of ensuring your code is buggy.
INPUT DATA
I am unable to insert a record calling the stored procedure with values: DCWEB4578, , 2P, CA, CALIFORNIA but when I change to the string "NULL", the insert succeeds. When I try to call the stored procedure to update the inserted record with values: DCWEB4578, "NULL", 2P, CO, COLORODO the update does not happen since I still see the original record in the table. Please advise. Thanks in advance for your help.With the <tt>commit</tt>s and <tt>when others...</tt> removed from the code you'll have a chance of seeing what's actually happening. Note that the entire procedure can be simplified by writing as a MERGE</tt> statement.

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

I just got an IPAD2 on Saturday. With the Mac, I could always tell when programs were open/running by going to the menu bar. How can I tell what programs are running in the background. I am struggling with not being able to go to a menu bar at the top

You can see which apps are open and/or recently used by double-clicking the home button to bring up the taskbar at the bottom of the screen (not all apps that appear there are active) - you can then close apps on it by pressing and holding one of them for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar. If you have an app 'open' on-screen then it won't appear on the taskbar, you will need to go back to the homescreen first, and it should then show when you next open the taskbar.
If you haven't already got a copy then you can download the iPad manual from here : http://support.apple.com/manuals/#ipad

When i open firefox it instantly goes to the bottom of the page then opens a new one. i cant close the pages down the bottom and they are running in the background slowly everything down

when i open firefox it immediately goes to the bottom tool bar and keeps running. a new home page then opens and i cant close the one at the bottom because there is no icon. these hidden pages keep playing old youtube song and another one with adds running. how do i close these pages please? also if i minimise firefox to go onto say, email, i cant retrieve it and have to then open another home page. argggghhhhhhhh. help please. thanks and have a great, 'quiet' day. beth

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

GOING OVER THE LIMIT

I have had the limited "USB" modem for 6 months and all of a sudden last month went over the 5120. Not by much, but I had never even come close to going over before. When I checked daily use on the bill there are several days of higher than my normal use. It didn't take many days of triple and quad to trigger extra charges. The time and sites that I use have not significantly changed.
Now, someone tells me that my computer can be running things in the background that I don't even know about. Someone also mentioned that the little light on the front of my laptop flashes when info is being received.
Can someone tell me what the heck is happening and how I can stop it.

dEaDpiMp wrote:
About Three or Four months I started going over the "data usage limit" I have canged nothing in my habits and some how my data usage has nearly tripled. I had 200 to 300 dollar bill. Anyone else had the problem with this. Something is funny!!
Try to call everyday to verizon and check your data usage, keep in mind that Verizon has a 72 hour delay on some data usage and if your roaming it can be up to 30 day delay. Also if your going to go over everymonth you might want to look into Virgin Mobil they are unlimited for $49.99 or get another Verizon Wireless Modem. It is better to $120 a month and have 10GB to play with than to get a bill for $300...

Any idea why in Numbers my COUNTIFS formula keeps breaking? For daycare purpose, I use a spreadsheet that helps me to count how many children I have at 3:15, 4:15 and 5:00. COUNTIFS works well when I create it but breaks after a while. Also I am using a p

Any idea why in Numbers my COUNTIFS formula keeps breaking? For daycare purpose, I use a spreadsheet that helps me to count how many children I have at 3:15, 4:15 and 5:00. COUNTIFS works well when I create it but breaks after a while. Also I am using a pop-up menu in the cells in time format, does it have any consequence on the formula?

Any idea why in Numbers my COUNTIFS formula keeps breaking? For daycare purpose, I use a spreadsheet that helps me to count how many children I have at 3:15, 4:15 and 5:00. COUNTIFS works well when I create it but breaks after a while. Also I am using a pop-up menu in the cells in time format, does it have any consequence on the formula?

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.

Are you behind a firewall or double NAT??
What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
It is plugged in of course isn't it.. no nasty join wireless anywhere??
The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens.

I have an app on my iPhone that I want to download on my iPad . Red icon with Chinese writing. Because I do not speak Chinese I do not know how to find it. The application is photography by different individuals of their vacations/trips. Can someone help

I have an app on my iPhone that I want to download on my iPad . Red icon with Chinese writing. Because I do not speak Chinese I do not know how to find it. The application is photography by different individuals of their vacations/trips. Can someone help

On your iPad go to the App Store icon, Tap on the Purchased Tab.
It will show you all the Apps that have been bought with the Apple Id currently in use by the iPad.
Assuming its the same one being used on the iPhone, you should be able to find the App there.
To further help you find it you can tap on the "Not on this iPad" button to limit the results to just Apps not currenlty installed on your iPad.

[SOLVED] Image going over the size of my TV

I just upgraded my TV to a 47'' panasonic SmartTV from my old LV 32'' one.
I connect it via HDMI for video playback and xbmc use: The video card is a nVidia GT 240
The problem I'm facing is, at 1080p @ 60Hz, the image goes over the edges of the TV, like is bigger than the tv itself, so you lose some inches from each side.
At 720, the image looks to fit right but this is not the desired resolution.
I use nvidia-settings in order to tweak xorg.conf, but I had to add some options by hand for the fonts to have 96dpi.
Can anyone help me to find the solution for this?
I have a windows partition for gaming and when I booted it up for testing i faced the same issues.....
Thanks!!
Last edited by Xi0N (2013-07-21 20:14:23)

The problem is the TV itself. I have no idea why, but regular HD TVs usually cut a few pixels from each side, doing a slight zoom in. This is called overscan. You can usually disable this in the TV settings by setting the image size to "fullscreen" instead of 16/9.
Some quick Googling gave me this article, it seems pretty detailed (I'm learning myself right now why all TVs do this).

HT204406 When I activate iTunes Match it goes through the process of analysing my library, then it matches a few songs but always then stops stating that the network dropped out - any ideas?

When I activate iTunes Match it goes through the process of analysing my library, then it matches a few songs but always then stops stating that the network dropped out - any ideas?

Bstarling wrote:
I am unable to write down because the log is moving too quickly.
Well, you don't have to write down anything. Just click on the message and copy it. Then paste it here, or in a text editor (eg, TextEdit). And you can enter a string like "Audio CD" (w/o the quote marks) in the filter and see only messages containing it.
mds[71]: (Error) Server: Failed to register path "/Volumes/Audio CD"
That's the metadata server, used by Spotlight. AFAIK, Spotlight does not index audio CDs, so what is this about? I don't know. Maybe it's the cause of what you observe; or maybe it's another symptom. Thinking again of the network issue… have you maybe installed some third-party software related to both Spotlight and the network (Searchlight perhaps)?

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from A

I recently bought, from the original website of Adobe, Photoshop elements 13. However, when I go with my mouse pointer over the menu, It hangs or he works very slow. Does anyone have an idea how I can fix it? I have already downloaded updates, both from Adobe and Windows. I have a new pc with window 8.1.

It could be a coincidence, but I rebooted the machine and (knock on wood) PSE13 seems to be working ok.

My ipod touch died in the middle of a upgrade and now it wont come back on. When I charge it, it just goes to the apple but not the home screen. how do i fix it

my ipod touch died in the middle of a upgrade and now it wont come back on. When I charge it, it just goes to the apple but not the home screen. how do i fix it

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I'm using Lightroom cc, I'm trying to create a develop preset. I'm making changes to one photo that I want to apply to many other photos, one of the changes is to blur the background using the adjustment brush. When I am blurring I am going over the photo

Similar Messages

Maybe you are looking for