Trying to download on windows 7 home premium 64 bit, goes to temp file but will not run , why?

downlaoads first, then second screen says let program make changes, yes then, extracts, but the stops nothing happens no setup screen

Haven't got a solution, but want to see if I've got same problem- got 9300; windows 7 (tried download on both ultimate and premium)- keeps saying download unsafe- currpted

Similar Messages

Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.

Tried to download adobe flash several times on our new Mac and it will not open in any internet sites that we have tried.

test to see if it's installed, Flash Player Help

Using Vista operating system Firefox Version 3.05 tried to update to new version but after download it goes to run then my only option is save the file it will not run the file.

the firefox set 7.01 up file can be downloaded but will not run do I have to update to 4 the 5 up to 7?
download run setup
unable too run setup everytime

The longer this thread continues, the more ancillary comments you throw in that aren't directly pertinent to your problem with your DVR software not working with Firefox 4.0. Sorry, I don't intend to continue with this discussion.
I do agree that ''something'' needs to be done better with regards to plugins for Firefox, but I do disagree with you as to whose responsibility that ''something'' is.

Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.

Program runs in win 7-64 Pro BUT will not run in win 7 home or vista.
I'm testing 32bit software that will run in 7-64 Pro but will not in win 7 home premium or vista.
The 7-64 Pro machine is NOT running the program in XP mode although is is being run as admin. The 7 home premium and vista beta testers have tried every work around/mode, admin mode, and anti-virus exception. I've run process explorer & WinMerge to evaluate
the differences between os operations & dlls loaded but am unable to find the OS issue.
Currently 2-win7-64 machines, 1 vista machine and 1 win 7 machine had no issues with the program as it started up and ran immediately.
After 3 beta's 30 hours of testing & 50 of my own, I believe I've narrowed the issue down to the win 7 home premium and vista os's.
Can anyone here suggest other ways to further narrow it down so as to provide functionality on all 3 os's?

You must provide the exact name and version of the software for anyone to attempt to answer your question. Primarily the functionality of any software is entirely dependent on what platforms the publisher intended the software to run on.
If you are the programmer you need to go to the Microsoft Developer Network forums for assistance:
http://msdn.microsoft.com/en-US/#fbid=Xt631zR1D90.
This is an End Users' Peer-to-Peer forum that does not address programming from any perspective.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

HT204382 Telestream finds the plugged in HDVR file but will not play..blank black screen no sound or picture. DivX will not download. Error report sent to Apple. Any ideas how to import / play AVI files?

Mac suggestes downloads to open AVI files on HDVR. Telestream finds the plugged in HDVR file but will not play...blank black screen which has no sound or picture. DivX will not download, report sent to Aplle. Any ideas how to play the files?

Thank you, Daniel.....
Downloaded VLC and can play, trying now to edit clip and put it into a keynote presentation. Bought Mac as got fed up with windows but still not got used to it!

Downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with the

downloaded acrobat reader 11 onto my Mac Book Pro, it can open the file but will not print. Get a message that says PDF cannot be printed, however, I forwarded it to someone else and they could print it, no problem. I called HP and spent an 1hour with them and then called Apple support and worked with them for 3 hours. No one can figure it out. Is there something wrong with this version? the pdf was created in 2004. Do I have to pay to get Acrobat?

Let me give you a slightly different perspective than everyone else here. You are using an unsecured wireless network, which means that all your network traffic is easily available for viewing by anyone else using that network. That's bad. Very bad, for you, unless you absolutely trust everyone who lives within range of this network. So stop doing it.
As to the Mac not connecting, wireless networking is simply too complex for any reasonable answer without more information. There are many possible error points, and as often as not it's the Mac that can connect and the Windows PC that cannot. Since you can't give us any information about the configuration of the neighbor's network, and can't make any changes to it, we can't do much to help you troubleshoot it.

Quicktime installs on Windows 7 Home Premium 32-bit but will not run

Have installed the latest QuickTime 7 under Windows 7 Home Premium (32-bit) but it will not run when double clicking on the icon on the desktop. Can anyone assist me with this matter? iTunes works perfectly.

Hi cameronweir73!
Here is an article that will help you troubleshoot this installation issue with iTunes:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Here is another article that will help you troubleshoot this issue with Quicktime on your computer:
QuickTime: Windows troubleshooting tips
http://support.apple.com/kb/TA44469
Thanks for coming to the Apple Support Communities!
Regards,
Braden

I just reinstalled my entire computer system (Windows Vista 32 bit) and for some reason, iTunes will not download onto my computer. I get the 'Thank You' page but nothing happens.

My firewall is just the same as always even BEFORE I had this problem. My Norton antivirus isn't blocking it and I've tried downloading earlier versions with the same problem.

Perhaps try downloading and saving a copy of the installer to a different PC. (If you're on a 32-bit Windows system, try to download on a different 32-bit Windows system.) Copy the iTunesSetup.exe installer to an external hard-drive, or a large-enough thumb drive or burn it to a CD-R. Carry the installer back to your PC, copy the installer to your hard drive. (Don't run the install from the ExHD, thumb or CD-R.) Start the install by doubleclicking the iTunesSetup.exe file.

Windows 7 64 bit: Just installed firefox and pages will not load, or are very slow, IE explorer loads instantly

I installed windows ultimate 64 bit, Tried to install firefox for my default browser. Internet explorer loads everything like normal, no problem but firefox will not load or does after 5 mins +
I checked my firewall windows provides and Avira to see if they were blocking, Found nothing of anything being blocked.
This is a fresh installed windows 7, No viruses or malware

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Trying to download LR5 on new MAC. I have LR5 CD, but can't run on this IMac. I enter my license

Want to download LR5 onto new iMac. Computer won't read my LR5 CD. Tried to download from Adobe, but my Serial number is not accepted. All I can do is download the free trial. Not acceptable. I bought this copy of LR5. I check my Adobe account - My products - message: Cannot find at this time. I should have about 10 products.

Here's the Lightroom download: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5791
So when you say your serial number isn't accepted, have you tried entering it into the downloaded software?

Installed Acrobat Pro XI on Win 7, 64 bit. Program installed fully, but will not open or run.

I have tried uninstalling and reinstalling several times. Downloaded reader, no help. Adobe will not support by phone. What do I do?

Thanks, Sara.
I have done just that - I ran the cleaner and removed Acrobat entirely. Did a fresh install. Everything looked fine, was able to enter my serial number successfully, and got a successful install message. Yet when I try to open the program, it will bring up a box briefly which then disappears and the program does not launch. Subsequent attempts do not even bring up the box. No program running in task manager. This is version 11.0.07, running on Windows 7, 64 bit. I don't know if it makes a difference, but this was obtained through TechSoup.org.

Installed 11g XE, Win7 Home, XE started ok, sqlplus access ok, but APEX not running

I am installing XE 11g R2 32bit on windows 7 home premium 64bit.
I cannot get the home page to display:
http://127.0.0.1:8080/apex/f?p=4950
http://127.0.0.1:8080/apex/
lsnrctl status is similar to below but WITHOUT this portion:
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
I can run sql command line and connect as system
SQL> select dbms_xdb.gethttpport from dual;
GETHTTPPORT
8080
I can start/stop database.
I can restart OracleServiceXE/OracleXETNSListener with no errors.
In the log files inside app\oracle\product\11.2.0\server\config\log, there is only 1 "error" in line 23 of cloneDBCreation.log
SQL> shutdown immediate;
ORA-01109: database not open
I think somehow the http server is not started because there's no process listening to 8080?
Anyone can offer insight into this?
Thanks.

Please post output of
set
lsnrctl stat
Another simple measure is to rename listener.ora to, say, listener.ora.moved. Then bounce the listener. Without listener.ora, default parameters apply.
Make sure there are no firewall/security products in the way of database instance and listener communication.
Example lsnrctl output for reference (this one happens to come from an older Beta install):
C:\Users\>lsnrctl stat
LSNRCTL for 32-bit Windows: Version 11.2.0.2.0 - Beta on 16-SEP-2011 11:39:15
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 11.2.0.2.0 - Beta
Start Date                06-SEP-2011 12:16:21
Uptime                    9 days 23 hr. 22 min. 53 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Default Service           XE
Listener Parameter File   C:\Oracle\xe112beta\app\oracle\product\11.2.0\server\network\admin\li
Listener Log File         C:\Oracle\xe112beta\app\oracle\diag\tnslsnr\Host7\listener\alert\log.x
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Host7)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Host7)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XEXDB" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 1 handler(s) for this service...
The command completed successfullyAbout XE Homepage. Important piece of info to look for is this kind of endpoint information:
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=Host7)(PORT=8080))(Presentation=HTTP)(Session=RAW))Without that "port" registered, you won't be able to access Homepage or any other Apex apps via EPG.
Edited by: orafad on Sep 16, 2011 11:37 AM
Edited by: orafad on Sep 16, 2011 11:39 AM

Successfully downloaded a program, but will not run once installed.

I am not as Mac savvy as I should be so I apologize if my computer terminology is not up to snuff.
I have never had problems downloading programs, installing them, and running them in the past. The last successful program was Amazon MP3 Downloader. Today I attempted to download Plex. It downloaded successfully. I dragged the icon to my applications folder. When I went to click on the icon for the program to run, it appeared in the dock for a second (did not bounce at all) then disappeared. I tried the process a few more times and yielded the same results. I also tried to download a few other programs just to make sure it was not Plex in particular, and the same thing occurred. Any suggestions?

The same thing happened to my daughter on her Mac the other day. It turned out that the program she'd downloaded wasn't compatible with her OS. Did you make sure you'd downloaded a version that is compatible with Tiger?

Scheduled Task will run on Windows 7, but will not run on Server 2008 R2

So I have a scheduled task that uses nircmd to take a screenshot and then email it to a few company emails each night. With our old Exchange 2003 server, everything works prefectly on the 2008 R2 server (using SMTP). But since we upgraded to
Exchange 2010 it no longer seems to work (at least it never sends the email anymore).
What confuses me more is that this exact task (I exported it) runs perfectly fine on a Windows 7 Pro computer, even using the new Exchange 2010 SMTP address.
Both machines are logged in as the same user. I can even login as the domain administrator on each machine and still have the same issue. Only the Windows 7 Pro machine will successful run the task. To restate it, the Server 2008 R2 server
will run the task successfully if I use the old Exchange 2003 SMTP address.
Thanks for any advice!

Hi joshz451z,
Would you please let us know current situation of this issue? Did you refer to Dave's suggestion and check that relevant logs? If any update, please feel free to let us know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

My ipod syncs and is fully charged but will not run tried the reset still comes up with the language screen Any ideas how to fix?

How to fix my nano so I can use

If the unit has NEVER been jailbroke, first try a system reset. It cures many ills and it's quick, easy and harmless... Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Trying to download on windows 7 home premium 64 bit, goes to temp file but will not run , why?

Similar Messages

Maybe you are looking for