Trying to include additional installer, LabVIEW wants the wrong distribution
I am trying to build an installer for an application that includes NI-SCOPE 3.7 (3.4 was previously installed, it was removed before loading 3.7). I am trying to include NI-SCOPE 3.7 as an additional installer.
When building the installer, LabVIEW is asking for the NI-SCOPE 3.4 distribution discs. I do not want 3.4, I want 3.7. How do I fix this so that LabVIEW uses 3.7?
Hi User1000,
Could you please verify that NI-Scope 3.4 does not show up in NI Measurement & Automation Explorer under Software. Also, make sure that any NI SCOPE specific VIs that are included in your code are included in 3.7. You could try to deleting those VI's and including them again in the project. Another suggestion I have for you is to try to make a new project and move your code over to the new project and try to build again. Finally, would it be possible for you to include some screenshots or your code?
Regards,
Allison M.
Applications Engineer
National Instruments
ni.com/support
Similar Messages
-
The other day I had to reset my phone because i pulled it out from my laptop when it was updating. I then tried to restore it but i clicked the wrong option and it has restored all of my stuff from 2 years ago, is there any way to get back the stuff I had
maggielou wrote:
I thought that I had backed up my pictures to icloud, but when I looked online at icloud, I don't see pictures listed. However, a few of the recent pictures have shown up on my phone.
IHow could I get these from my MacBook to my phone?
Thanks again.
When you log into you icloud account on your computer you are viewing data that you sync to icloud not the backups. You can't view the backups.
Look at the two links I provided.
You still didn't answer any of my two questions I asked. -
IPod touchMy iPod touch is lock and my brother was trying too use it and he entered the wrong code too many times
Ok
I may be able to help you .
If you backed up your iPod prior to it being locked you may be in luck.
1. Hook it up to your Mac or PC
2.Open iTunes
3.Click on your iPod (on the left hand side somewhere)
4.Click on restore (in the centre somewhere)
5.follow the onscreen instructions
Once you have restored the device there should be an option that says restore from back up.
Click on that.
Hopefully this works. If it doesn't please let me no. -
I've forgotten my wi-fi password for a home network set-up years ago on a Powerbook. I'm now trying to add a new iMac to the same network so I can have 2 hooked up. How can I retrieve my password for the network I created or can I set-up a new one? I did try the latter, but it didn't seem to work on the new iMac for some reason. Thanks in advance for any suggestions!
HI, Welcome to the Forums...
The password may be stored in your keychain on the system you set up the original PowerBook.
Run KeyChain access in the utilities filder and see if you have a Airport base station password entry, from this you can reveal the password.
Regards,
Shawn -
Hi, everyone.
When I download Flash Player Installer from the Adobe distribution site Adobe Flash Player Distribution | Adobe the file downloads to my hard drive as a generic file with no extension, and Windows can't determine which program to use in order to open/play the file. I am using Windows 7 Professional 64 bit.
Is there something wrong with the downloaded file? Or am I missing required software?
Thank you for your time,
-BrandonYes, I've never had a problem before. I've even downloaded the Flash Player Install files from the Adobe distribution site on multiple occasions in the past without issue. The only thing I could think of is that perhaps the ".exe" extension was left off to avoid triggering security measures on a computer or private network that would prevent the download.
Anyway, it worked after I added the ".exe" extension to the filename, so I have no complaints! -
My son had place a passcode and don't remember it and he try so many times to unlocked the phone but since he did it so many times and it was the wrong passcode the phone now is disabled, How can I get it to work again?
Well, the level of pain you are about to experience will hinge on what level of backup you have of the phone. If none, you will soon have a blank, from-factory phone you will have to reconfigure from scratch.
Read here: http://support.apple.com/kb/HT1212 -
Hello, I am having some major troubles connecting my iPhone 4S to my home wifi. When I try to connect on my phone, it says I have an incorrect password. That's not possible because I can connect my MacBook to the same network with the same password. I have reset my network settings on my phone, reset my router, called apple support, triple checked I was trying it in correctly, I have no clue what's going on.
The only thing different is I just moved, but I have the same router/phone/internet provider.
I've seen some discussions of router security options being the problem, I have my router connected to : WPA-PSK [TKIP] + WPA2-PSK [AES].
The other options are: WEP , WPA-PSK[TKIP] , WPA2-PSK [AES] , WPA/WPA2 Enterprise.
My troubleshooting and understanding of all this is pretty limited, my applecare service did not help, please can anyone help me?
Thanks!If the issue happened after an update, you may want to go into an Apple Store. Be sure to let them know exactly what's wrong with the device.
-
I can not create an Installer on LabView, After install the Vision Builder Demo and then uninstall it. I can not create a Labview installer anymore, it asks me for a Vision Builder Installer, even if My Labview program does not have nothing to do with it...
Solved!
Go to Solution.Hi Shada this can happen if you are including additional installers to your installer for example DAQmx. When you are doing this the installer has to include other files like MAX (Measuremente and Automation Explorer). Probably when you installed Vision Builder it updated MAX, so when your installer is trying to Include MAX, its asking for the source where it was installed in your computer in this case Vision Builder.
Here you can cache the information so its not asked again, or you can download a newer version fo DAQmx, so it will update MAX and change de dependecy.
You can find more details about this issue in this KB:
KnowledgeBase 3S88PJMY: Why Do I Get A "Missing Distribution" Error When Trying to Build an Installe...
And for keeping a copy here is more info:
How Do I Stop the Missing Distribution Notification Each Time I Build An Installer?
Best Regards
Benjamin C
Senior Systems Engineer // CLA // CLED // CTD -
when itunes upgraded my laptop went to 100% cpu usage. only solution was uninstall. have tried itunes again as my daughter wants the new ipad. still same problem tho so not keen to spend £400 on new pad without pc support. anyone help? (ps been using ipod touches 1 and 2, been great source of pleasure for my two girls, but cant sync them, so using the little shuffles for music, syncing to an old version of itunes on an old netbook - had the sense to switch off upgrades when the new version went wrong)
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
LabVIEW FPGA: The compilation failed due to a xilinx error
I'm getting a "Compilation failed due to Xilinx error" trying to compile code in LabVIEW 2013.The code had compilated successfully in labview2012. Any suggestions on what is causing this issue?
Details:
ERROR:HDLCompiler:432 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" Line 29: Formal <cparametersignal> has no actual or default value.
INFO:HDLCompiler:1408 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaSetOutputDataEnable.vhd" Line 37. cparametersignal is declared here
ERROR:HDLCompiler:854 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" Line 21: Unit <vhdl_labview> ignored due to previous errors.
VHDL file C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd ignored due to errors
-->
Total memory usage is 204688 kilobytes
Number of errors : 2 ( 0 filtered)
Number of warnings : 4 ( 0 filtered)
Number of infos : 0 ( 0 filtered)
Process "Synthesize - XST" failed
Compilation Time
Date submitted: 2014/2/26 18:15
Date results were retrieved: 2014/2/26 18:17
Time waiting in queue: 00:06
Time compiling: 02:02
- PlanAhead: 01:16
- Core Generator: 00:00
- Synthesis - Xst: 00:35
Solved!
Go to Solution.I have got the same error, Have you solved this error?
What you have done?
jasonneu wrote:
I'm getting a "Compilation failed due to Xilinx error" trying to compile code in LabVIEW 2013.The code had compilated successfully in labview2012. Any suggestions on what is causing this issue?
Details:
ERROR:HDLCompiler:432 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" Line 29: Formal <cparametersignal> has no actual or default value.
INFO:HDLCompiler:1408 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaSetOutputDataEnable.vhd" Line 37. cparametersignal is declared here
ERROR:HDLCompiler:854 - "C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd" Line 21: Unit <vhdl_labview> ignored due to previous errors.
VHDL file C:\NIFPGA\jobs\THY4t7n_z6im2K7\NiFpgaAG_0000003a_SequenceFrame.vhd ignored due to errors
-->
Total memory usage is 204688 kilobytes
Number of errors : 2 ( 0 filtered)
Number of warnings : 4 ( 0 filtered)
Number of infos : 0 ( 0 filtered)
Process "Synthesize - XST" failed
Compilation Time
Date submitted: 2014/2/26 18:15
Date results were retrieved: 2014/2/26 18:17
Time waiting in queue: 00:06
Time compiling: 02:02
- PlanAhead: 01:16
- Core Generator: 00:00
- Synthesis - Xst: 00:35
Mahran -
Hi community,
When trying to buy Mountain Lion I get: "The product distribution file could not be verified. It may be damaged or was not signed.”, any clue on how to fix this issue? It only happens in one of my computers.
In the console I get an error when trying to purchase it:
7/26/12 9:50:34.387 PM App Store: FRPurchaseManager: Preflight operation for 537386512 failed with error: Error Domain=com.apple.appstore Code=0 "The product distribution file could not be verified. It may be damaged or was not signed." UserInfo=0x7fde9bc452a0 {NSLocalizedFailureReason=Cannot create PKProduct from "file://localhost/var/folders/8l/ndt85j717d3_k8gr6ztmljdc0000gn/C/com.apple.app store/537386512/preflight.pfpkg" Error Domain=NSURLErrorDomain Code=-1100 "The requested URL was not found on this server." UserInfo=0x7fde9bc43b50 {NSUnderlyingError=0x7fde9bc42e60 "The requested URL was not found on this server.", NSErrorFailingURLStringKey=file:///var/folders/8l/ndt85j717d3_k8gr6ztmljdc0000g n/C/com.apple.appstore/537386512/preflight.pfpkg/index.sproduct, NSErrorFailingURLKey=file:///var/folders/8l/ndt85j717d3_k8gr6ztmljdc0000gn/C/co m.apple.appstore/537386512/preflight.pfpkg/index.sproduct, NSLocalizedDescription=The requested URL was not found on this server.}, NSLocalizedDescription=The product distribution file could not be verified. It may be damaged or was not signed., NSUnderlyingError=0x7fde9bc442b0 "The requested URL was not found on this server."}
1) I deleted the /var/folders/8l folder (gets recreated when opening the app), no result.
2) Tried to check "Best attempt" for both OCSP and CRL certificate management in Key Chain.
No result in any way.
Any idea?Hello
It can be an issue related to antivirus so disable it or download in safe mode
regards -
Trying to upgrade to Mavericks but get The product distribution file could not be verified. It may be damaged or was not signed.
I have done Google and done the Var folder thing and deleted the folder with Apple store etc but to no availRemember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have. -
Hello,
Bought a Nano today and trying to set it up. Selected the wrong language. I am not sure if I'm getting the "eject before disconnecting message" and I'm not sure what to do next!Hello sheri85,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPod: Changing the display language
http://support.apple.com/kb/ht1824
If you have an iPod nano or Fifth Generation iPod (iPod with video):
Scroll down to the last menu option but don't select it.
Scroll up one menu item. This should be Settings.
Press the Center (Select) button. This takes you to the Settings menu.
Scroll down to the last menu option but don't select it; in English, this is the "Reset All Settings" option.
Scroll up to the third menu item from the bottom one. This should be Language.
Press the Center button to select Language.
Select your preferred language from the list.
Have a nice day,
Mario -
I had all my software, including my ‘Adobe Creative Suite 4 Design Premium’ removed from my MacPro (OSX 10.10.2) by a Computer technician after I had inadvertently installed some malware.
Now I can’t reinstall my CS4 because the installer software wants me to identify the product from which I am upgrading, but mine isn’t on the list. The old product from which I am upgrading is called ‘Adobe Design Collection’. Furthermore, it has 4 serial numbers (one each for Photoshop, InDesign, Acrobat and Illustrator), not just one, as the installer requires.
I know this can be done, as I have had it working for a long time. Am I doing something wrong now?Contact support be web chat and have them generate a working temporary serial/ challenge code for the install.
Mylenium -
The iTune cannot detect my iPhone 4S. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?
The new cable is completely new, and my computer can detect the phone as a drive, and battery charging is ok. So I believe the USB cable works properly. It is so weird that just iTune itself cannot detect the phone, and it is of the most updated version. What else can I do? Thanks.
Maybe you are looking for
-
Alternative of BAPI_ALM_ORDER_MAINTAIN
Hi all, The BAPI function module BAPI_ALM_ORDER_MAINTAIN is marked as obsolate in ECC6. If you know any alternative of this BAPI, Please let me know. Thanks & regards, Arnab. Moderator message: please do more research before asking. Edited by: Thom
-
Custom shape tool in photoshop CS4
I want to change what looks like a stroke on a "hollow" shape. I don't want to change the overall dimensions, just the width of the outline. Does anyone know how to do this?
-
I am receiving runtime c++ errors since the last update of firefox. What's up?
I get the following message; This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. The program is Firefox.exe When I click ok, it closes the program. When I r
-
PHP OHS XE - Mixed Environments
Hello All, I was wondering if anybody has ever run into the following problem. I've got OHS and XE running on the same server, btu installed in 2 distinct ORACLE_HOME with 2 distinct users (oracle, oraweb) both part of the oinstall group. I'm using t
-
Modifying the HR Infotype 25 Screen
There are 6 fields on the infotype 25 screen we are using for this one client, P0025-PKT01 to P0025-PKT06, that use the data element BUPKT, which in turn is of the domain DEC3 - it is of type P, but it is essentially a whole number up to the hundreds