HT1824 Since I accidentally clicked on the wrong language, I don't know what my IPOD Nano is telling me to do/not to do. I'm hitting the home button and nothing is happening.
Hello,
Bought a Nano today and trying to set it up. Selected the wrong language. I am not sure if I'm getting the "eject before disconnecting message" and I'm not sure what to do next!
Hello sheri85,
Thank you for using Apple Support Communities.
For more information, take a look at:
iPod: Changing the display language
http://support.apple.com/kb/ht1824
If you have an iPod nano or Fifth Generation iPod (iPod with video):
Scroll down to the last menu option but don't select it.
Scroll up one menu item. This should be Settings.
Press the Center (Select) button. This takes you to the Settings menu.
Scroll down to the last menu option but don't select it; in English, this is the "Reset All Settings" option.
Scroll up to the third menu item from the bottom one. This should be Language.
Press the Center button to select Language.
Select your preferred language from the list.
Have a nice day,
Mario
Similar Messages
-
My iphone screen has gone completely blank I have tried holding down both the sleep and home buttons and nothing has happened and I have tried to connect it to my laptop but itunes will not recognise, what can I do ?
have you tried charging the device ?
if so and it still does not work you can try a Forced Recovery..
by holding the HOME button down and plugging it into your computer at the same time..
http://support.apple.com/kb/HT1808 -
My iphone 4 is telling me I have to restore but when I plug in and connect to itunes, it freezes about 30-50 % through the process. Now I can't use my phone at all? I am waiting about 1-3 hours for this process to finish and nothing ever happens. HELP!!
Put it into DFU mode - hold the sleep/wake button and home button until the screen goes black (ignoring the slide to turn off slider). When the screen goes black release the sleep/wake button but hold the home button. Continue holding the home button for 10 seconds, then release it. The screen should stay black. Plug it into iTunes and it should come up with this message "iTunes has detected an iPhone in recovery mode. It must be restored before use", that's when it is successfully in DFU mode. Now press the restore button in iTunes and it should run smoothly :)
-
My phone wont turn on ive tried holding the sleep and home button and nothing happened help?
i turned my phone off and it wont turn on ive tried holding the sleep and home button and nothing happened...i plugged it in to my computer and i didnt connect to itunes help
The two first choices are to reboot by holding both the power and home buttons until the apple logo appears, that can take up to half a minute. If that does not work, then more drastic is to restore using the recovery mode to connect to a computer running iTunes, described in http://support.apple.com/kb/HT1808 and summarized as:
-
I downloaded the OS X on my air and I can't use my keyboard and it won't let me restart my computer because it says that the application assistant canceled the shut down, I don't know what to do
When all else fails (it sounds like it has) hold the power button for about 10 seconds. This shuts down the computer. Then tap it to restart. Since it sounds like the OS upgrade began but then failed to perform a restart you may find that the Install Mavericks file is still in the Applications folder and you can try again. Or you might find that you have to redownload. I don't think the installation is going to proceed as if the computer had successfully restarted but I could be wrong (and in this case gladly so for your sake.)
-
I have completely lost my safari. I was getting an error and I lost the address bar. I tried to fix it by changing the home page on the preferences. I don't know what to put in the home page now. How do I get safari back?
I tried editing my first post but couldn't get there...
If you can open Safari go to the top of your screen, click Safari / Preferences then select the General stab. You can type in the web address for your Home page there. -
trying to collect rewards from a survey site. told problem may be with the browser. I don't know what to do.
Hi,
Please [https://support.mozilla.org/en-US/questions/911441 see this.] You may also want to check if this happens in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.] -
hello everyone...I got my very first macbook pro just today and i have a problem deleting the "test" user account. if i can't delete it, the system won't let me turn off the system. I don't know what to do! HELP!!!!
Have you created another admin user? Go to system preferences click users and click the + to add a user; if you haven't already. Once you have another admin user other then the "test" user make sure you're signed out of the test user account. Sign in with the alternate ADMIN USER that you just created or had created already and go back to SYSTEM PREFERENCES and click the same USERS icon near the bottom. Now select the TEST user and click the - sign. This should prompt you if your sure you want to delete the user account. And your done.
New User created and Test User deleted... I hope this helps. -
My macbook turns on to a grey screen with a folder in the middle of the screen. I don't know what to do to get it to turn on...
This has never happened. I have tried to do the command-option-p-r trick and that didn't work. HELPThat folder with the question mark icon means that the MacBook can't find the boot directory. That can either mean it can't find the hard drive or the hard drive data is somehow corrupted.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up). That willforce your MacBook to boot from the install DVD in the optical drive.
Once it has finished booting and you Choose Your Language and you are at the Install screen launch Disk Utility from the Utilities menu. Is your Hard Drive in the list on the left?
If it is then select the First Aid Tab run Repair Disk and if that repairs any problems run it again until the green OK appears and then run Repair Permissions.
If your hard drive isn’t recognized in Disk Utility then your hard drive is probably dead. -
I drafted an email, hit my home button and went to Safari before sending the email or saving it as a draft. When I returned to mail, the email I was working on cannot be found. How can I recover it?
I've found that since I installed iOS7, I've had this problem a lot. In iOS6, I was initially cautious about leaving a draft open and unsaved while I used other apps, but soon found it was quite reliable and they were always still there when I returned to Mail.
With the first version of iOS7, the draft was almost certain to be gone when I returned. Since iOS7.0.4 it's a lot better, but not reliable enough to trust. I've got into the habit of using Cancel/Save Draft *every* time I need to use Safari, etc, before continuing with an email I'm typing. It's just not worth having to retype it.
Note that when you return to the Mail app, you don't have to go to the Drafts folder to find your draft again. Just tap and hold the New Message icon, and a list of drafts will appear. The most recent one will be at the top. I've found that this tip makes the idea of having to cancel, save and reopen much less tedious. -
I recently upgraded to the newest version of iPhoto. I used to have version 7, I believe. Now that I have updated I can no longer see my pictures. I downloaded the upgrader but I don't know what to do next. Please help!
Go to your Applications/ Utilities folder. Finder the upgrader app. Double click it to run it.
-
I'm trying to connect to my home wifi with my imac gh5. After I enter the password it says connection timeout or password incorrect. I know there's no issue with the connection but I don't know what else to do. Does anyone know how to fix this problem?
What is the make & model of your home Wi-Fi router that you are attempting to connect your G5 iMac to? Which exact model of iMac do you have?
What wireless security type is your router using: WEP, WPA, or WPA2? If you temporarily disable wireless security, can the iMac connect to it now? -
My computer has been spontaneously restarting itself. This last time I wasn't even at the keyboard, I was across the room. I don't know what to make of it, completely baffled. I'd love some help on this, and if it could come in layman's terms I'd love it even more.
Hi ...
Try Troubleshooting the MagSafe adapter
If the Mac freezes, it may be a preference setting.
Check System Preferences > Energy Saver
See if Restart automatically if the computer freezes is selected. If it is, deselect that box. -
I have a big problem, I don't know what I touched but when I open up my iTunes I can't see all the icons. The only icons showing are "podcast, iTunes U and Downloads" so in other words I can't find the movies, music etc. Which means I can't buy/rent!
Not all content types are available in all countries - in each country Apple can only sell what they are licensed to (and in some cases what a country's laws allows them to). A list of what is available where is shown on this page : http://support.apple.com/kb/TS3599
Do you have access to other music and film purchase download sites ? -
While doing the most recent firmware upgrade, my new iMac hung on the spinning ball. The instructions said "not" to turn off power during the process, so I don't know what to do. The ball is still spinning.
If you tried resetting the ipod and it still keeps having the same issue you described, try setting the ipod to disk mode.
Here is an article from the apple support website on setting the ipod to disk mode.
http://docs.info.apple.com/article.html?artnum=93651
If you can get the ipod into disk mode, connect it to the computer and rrestore the ipod using itunes.
if the ipod will not go into disk mode, you can return the ipod or set the ipod up for service via the apple ipod service depot.
http://depot.info.apple.com/ipod
Maybe you are looking for
-
Creation of WSDL file & import it in the creation of automated activity
Hi Friends, I want to create BPM process for automated activity.I have created task for human activity. I have created CAF Application,but I dont know how to ceate/import WSDL file(This WSDL file is used to assign the interface to the automated activ
-
this version on my Macbook works, the problem is on my imac which is a similar setup. I open the app and initially looks normal but it reverts to a menu bar showing only FIREFOX, and becomes unresponsive. However if that window is minimized the menu
-
Attachment transfer from SH (SRM) to PReq (R/3) failed in one instance
Dear Expers, in SRM 7.0 Classic, I have come accross the following problem with the transfer of the attachments from the SRM Shopping Cart to the R/3 PREq: This functionality is normally working absolutely fine but now there was one instance observed
-
I have a problem!!! my front camera doesn't work!!!!
-
How to display 2 lines in the same column header of jTable?
Please could you help me to display 2 character lines in the same column header of a JTable? And how to make a fusion between to cells? Thank you very much