Trying to open images, but getting kicked out of Photoshop

Trying to open an image and getting an error message that pops up stating: "The instruction at "01xda24b6b" referenced memory at "0x00000028". The memory could not be read. Tried clicking on OK to terminate or Cancel to debug. But still everytime I open an image it comes up. Just bought the version an uploaded with all the correct specs.

What kind of images? Also please tell us:
Operating System/version
Photoshop version number
Amount of RAM installed
Hard drive(s) capacity
Make and model number of video card

Similar Messages

  • When I open FaceTime I get kicked out due to "An internal error." Help please?

    I'm getting kicked out of FaceTime. Can anyone help?

    Hello BrandonVonk,
    The toolkit wouldn't show up in your installed programs list as it is more like a plugin to LabVIEW. Instead, pull up NI License Manager and go to Local Licenses > LabVIEW XXXX > Toolkits and see if it is listed amongst the toolkits you have installed. There should be a geen box next to it to indicate that it has been installed and activated.
    Hope this helps,
    Siana A.
    Application Engineering
    National Instruments

  • I created a newsletter using pages on my IPAD3.  I can see see it...the icon is till there but when I tap it to open it, I get kicked out of pages.   Tried rebooting  and I can open other documents, but not this one.  Any ideas?

    I created a newsletter using pages on my IPAD 3.  All of a sudden I can no longer open that document.   When I click on it, it throws me out of pages all together.  I can open other pages documents, but not that one.  It is very frustrating to be able to SEE the file, but not open it.
    I rebooted and I do have icloud back-up on but am not sure how to restore an older version.  I also made sure there are no updates for pages.   Until the IPAD I used a home PC which I still have but am trying to wean myself off of.  I wish now I had used MS Publisher on my PC for the newsletter even though I hate it.   
    Please don't tell me I have lost my Newsletter and 20 hours worth of work.  

    Try resetting your iPad.  Hold the on/off and home buttons together for 7 or 8 seconds till the Apple logo appears.
    I'm assuming your default is to save Pages documents to iCloud, and that you had a good WiFi connection when you closed Pages the last time you tried to save the document.

  • Keep getting kicked out of contribute when trying to connect to website

    each time I try to connect to my website I want to alter I get kicked out of Contribute.  It use to work, but doesn't anymore.

    Hello Cvillanueva2769
    Start with the article below for iTunes crashing when using it or trying to sync. Try starting up iTunes in Safe Mode to see if does the same thing. You may need to remove iTunes and reinstall it as another troubleshooting option. 
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ht4627
    Regards,
    -Norm G.

  • I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please

    I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plug-in is not recognizing the format of my new Nikon D610. I updated the version of my Camera Raw plug in and am still getting this message when trying to open images in photoshop. Please help.

    This link shows that ACR 8.3 supports the Nikon D610 and 6.7.1 was the final version for CS5.
    Camera Raw plug-in | Supported cameras
    So you can upgrade to CS6 and ACR 8.7.1
    or using the DNG converter, convert your Nikon raw files to dng format to open in CS5.
    Here is the download link: Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.7.1
    or Windows: Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
    And here is a great video tutorial on how to use the converter.
    https://www.youtube.com/watch?v=0bqGovpuihw
    Gene

  • Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same eror message

    Upgraded to 5.4 when opening lightroom get a message "encountered an error when reading from its preview cache and need to quite" tried this several time but get the same error message.  Says Lightroom will attempt to fix the problem the next time it launches but that is not happening.  How do it fix this?

    Delete the preview cache using your operating system. It is a folder whose name ends with Previews.LRDATA. Do not delete the Lightroom catalog, which ends with .LRCAT

  • I was at Apple Store yesterday and they created a pages document for me.  When I got home and tried to open it, I get a message that I need a newer version of Pages.  I see the image when I before I push "open".  The 'kind' is pages publication.

    I was at Apple Store yesterday and they created a pages document for me.  When I got home and tried to open it, I get a message that I need a newer version of Pages.  I see the image before I push "open".  The 'kind' is pages publication.  The file does not appear in the 'open recent' list.

    Just be careful with Pages 5, it is not strictly an upgrade.
    Apple has actually removed over 90 features and some work can be very difficult in the newer version.
    It was all done to make it more interchangeable with the inferior iOS version:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
    Peter

  • Trying to open Aperture, but I get the message, "There was an error opening the database for the library "/Users/davewasson/Pictures/Aperture Library.aplibrary". - and it forces me to quit. What do I do?

    Trying to open Aperture, but I get the message, "There was an error opening the database for the library “/Users/davewasson/Pictures/Aperture Library.aplibrary”. - and it forces me to quit. What do I do?

    Dave-
    You can try opening the old (problem) library by launching Aperture into Library First Aid mode and choosing to Repair (first option) or Rebuild the library. Before doing this, make a backup copy of the old library, since both Repair or Rebuild will write changes to the library database.
    Repair is the faster and less drastic option, so try that first: After backing up your library, hold down both the Option and Command keys while dragging and dropping the problem library on the Aperture icon. The Photo Library First Aid window appears. Select Repair Database, then click Repair. After some time Aperture should open the library, if possible.
    If that fails launch Aperture back into Library First Aid and select Rebuild Database. Depending on the size of your library this operation could take some time, up to several hours for a very large library. When the main window appears you may have some extra Recovered folders/projects. This operation rebuilds the library from scratch and is usually successful at reviving problem libraries.

  • Every time I open photoshop elements 11, it uninstalls. I have tried reinstalling 3 times, but get same result

    Every time I open photoshop elements 11, it uninstalls. I have tried reinstalling 3 times, but get same result.
    Can anyone help with this issue? Please!

    Hi 49balf,
    Thanks for visiting Apple Support Communities.
    I recommend removing and reinstalling iTunes using these steps:
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    You can find the article with these steps and more information here:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Best,
    Jeremy

  • I have taken all measures to clear my iPad but still getting kicked out of the internet and sent to my home page. What next?

    I have taken all recommended measures to clear my iPad Air but, I still get kicked out of the internet. Problem seems to be more frequent as time passes

    I don't know what you mean by "all recommended measures."
    Please tell me that it has NEVER been jailbroke.  If that's the case, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, if you have IOS-7, read this.

  • Hi i need sum help plzzz, iphone 3gs blackscreen and tryed evrything but wont kick out of dfu mode , much apreicated plz

    hi i need sum help plzzz, iphone 3gs blackscreen and tryed evrything but wont kick out of dfu mode , much apreicated plz, it just happen wen i was restoring  the screen is balck but wen i restore it from itunes it says erorr 1600 and itunes does not reconise the phone , i have tryed eveything bt still no luck , I NEED UR HELP PLZZZ ,its my disabled daughters thank you

    Anyone on this forum can correct me if I am wrong. I am not judging you, but to my knowledge the iTunes error 1600  usually affects products that are  jailbroken. again I am not saying that your iPhone 3GS was jailbroken. my only advise off the top of my head to assist you is to download the recent IOS firmware online. I know it is not the the #1 advised option, but it is the only option you have unless you wish to bring it to the Apple Genius bar and see if they can replace the phone or fix it themselves.

  • W510 Wireless Adapter: getting kicked out of most wireless networks

    Hi Everyone,
    I'm running a W510 with Windows 8 on it. I have an extremely annoying issue with my wi-fi network network card and I have no clue where it's coming from.
    The wi-fi networks at my home and office work perfect and I haven't had a single issue with them. I recently started travelling a lot and tried using wi-fi on various locations such as open wi-fi on airports, secured networks in hotels, cafes, guest homes etc. Most of them are not workable. Here's what's happening:
    I can usually connect the first time I try, but after a few minutes, and hour top I get kicked out of the network or end up with "Limited" access. When I try to reconnect the it goes into and endless "connecting" state. Trying to disconnect hangs the pane and no actions are possible until I:
    1. Restart the explorer.exe process, which it "Not responding"
    2. Disable and Enable the wireless adapter though the Device Manager
    After that in case of some networks I can connect again for a few minutes, but then I all repeats all over OR I cannot connect back at all.
    I have tried using A LOT of networks in various places, and I'd say with about 80-85% I experience the described issue.
    I case of some of the networks I had a chance to connect by wire and they were working perfectly. Often I have other people around with me and of course I'm the only one facing the issue, it's not that I have really back luck for wi-fi networks. Plus my phone connects to majority of them without issue.
    In many cases when I switch networks I need to manually run ipconfig /renew and ipconfig /flushdns, before being able to connect to anything.
    The wifi adapter is a Intel Centrino Ultimate-N 6300 AGN on a Lenovo W510. The driver version is 14.2.1.3. I've seen 15.x version available for download from both Intel and Lenovo sites, but when trying to install it I got info, that I already have a newer version of the driver.
    Uninstalling the driver and letting windows reinstall it does not solve the issue.
    I ran out of options on what to check and how to debug this further. What are your thoughts on this?
    Thanks,
    MikeZyc

    Hi, MikeZyc
    I've seen this issue on many machines running Windows 8 with Intel wireless adapters. One fix that has worked more often than not is to navigate to Control Panel ► Programs and Features and uninstall the Intel Management Engine Driver. This driver seems to cause the wireless connectivity to get lost or not connect at all in Windows 8. Try uninstalling that, then restarting the computer and see if any improvement is made.
    Best of luck,
    Adam
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

  • Why am I getting kicked out of every app on my ipad2

    For the past few days any app I go into I get kicked out of. I thought it was my wifi at home. But it does it every where. This has happened before the upgrade and after the upgrade to 6.0.1.  I have also turned it off and back on several times.  Just to enter this took my 30 minutes of trying before getting kicked out

    1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two. Tap the minus sign to close app.
    2. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo.

  • User are getting kicked out of SNP planning book

    Hello Experts
    I hope you can help me out here!
    From time to time we are experiencing strange issue for SNP user's .. User are getting kicked out from SNP planning book
    Please help us.
    Thanks
    Ramesh

    Hi Ramesh,
    As far as I know, users should not get kicked out unless someone terminates their session.
    Even if they lock some data and the same data is needed by some job, it's the job that would fail showing data lock. Similarly, if some other uses tries to access the locked data, the user who is accessing later would face the issue of not being able to go to edit mode.
    It's possible to write programs that could specifically do this work of kicking out users before we run batch jobs, but let me assume that this is not the case with you.
    One possibility is that there is issue in livecache and so users are not able to access livecache or get kicked out from their active session (e.g. your log area gets full, then users would soon get kicked out after seeing the system hanging initially). This you would need to check at the time when users face issue. This would also mean that other processes that need livecache should also fail e.g. GATP, or SNP planning or PPDS planning related jobs would fail at the same time.
    If you could share exactly what error message the users are seeing, that could be helpful in resolving the issue.
    Thanks - Pawan

  • I keep getting kicked out of games.

    I keep getting kicked out of my games.  Just got a replacement iPad

    What have you tried to fix it ? Have you tried closing all apps via the iPad's taskbar and then doing a soft-reset and seeing if that makes any difference ?
    To close all apps, double-click the home button to open the taskbar, and then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar. (With iOS 7 you swipe or drag an app's screen from the taskbar up and off the top of the screen to close it.)
    A soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for