Trying to over write a FeildLable in ProfileRule-Using a custom component.

Hi,
I am trying to modify the Feild (Label) in a searchProfile - to a custom name.Since we are using UCM version 7.5 i may need to go for Custom Component to achive this.I am new to UCM Please through me some pointer to achive this.
If I am using 10gR3 the change is stright -I can use the option (Use Custom Label) while creating the Feild but this option is not available.
I am thinking if I can put a entry "xVendorAssetModelNo.dprFieldCaption=CustomLableModelNumber" in rule_vendorproductassetcustom.hda and do modification to use that.
Please advice the correct approch to achive this.
The reason for this requirement is
We are going to use a feild in two different profile.We want to use a different Lable in each profile.

Hey zero:
open dataset file for appending in text mode encoding default.
Probably because you're opening it for appending.
Rob

Similar Messages

  • How to over write a file on server using Dataset

    Hello Experts,
    Iu2019ve trying to write a code to fetch data in my program and create a file on server. My program work fine. However every time I run my program it append data at the end of the tile which it created 1st time. I donu2019t want this to happen. I want to new record to print on this file or in other words I want it to over write the file. Here is my code of dataset part.
    open dataset file for appending in text mode encoding default.
    if sy-subrc ne 0.
      write:/ 'File Opening/Creation Error'.
        exit.
    endif.
    loop at ivbrk.
      clear record.
        move ivbrk-headr to record+1(1).
        move ivbrk-vbeln to record+3(10).
        move ivbrk-waerk to record+15(5).
        move ivbrk-knumv to record+22(10).
        move ivbrk-fkdat to record+34(8).
        move ivbrk-kunrg to record+43(10).
        move ivbrk-kunag to record+54(10).
          transfer record to file.
        loop at ivbrp where vbeln = ivbrp-vbeln.
         clear items.
          move ivbrp-items to items+1(1).
          move ivbrp-posnr to items+3(6).
          move ivbrp-fkimg to items+11(13).
          move ivbrp-vrkme to items+25(3).
          move ivbrp-meins to items+30(3).
          move ivbrp-ntgew to items+34(15).
          move ivbrp-brgew to items+50(15).
          move ivbrp-gewei to items+66(3).
            transfer items to file.
        endloop.
    endloop.
    close dataset file.
    Can please somebody tell me what change I should make to over write on this file?
    Thanks a lot in advance.
    Moderator message - Please use code tags around your code
    Edited by: Rob Burbank on Jan 12, 2010 5:08 PM

    Hey zero:
    open dataset file for appending in text mode encoding default.
    Probably because you're opening it for appending.
    Rob

  • 2nd Column Over Writes Group Headers

    Post Author: jwebersole
    CA Forum: Crystal Reports
    I am trying to write a simple 2 column report. I have done this a 1000 times. However, for some reason the 2nd column over writes the Group Headers.  The check boxes for Format with Multiple Columns and Format Groups with Multiple Column are checked.  Is this a software problem? Or, is some setting changed?  I have tried everything short of reinstalling Crystal.  This also occurs on other machines.  So, I donu2019t think it is a problem exclusive to my machine.  Has anyone encountered this before?  It seems to be a problem with CR 11.5 R2 because it works fine on CR 11......  Any advice would be greatly appreciated!

    Yes, that`s right I meant the TableSorter class of the tutorial sorry again...
    Regards, Jens

  • Can't get the upgrade to over-write the older version

    i have tried to upgrade firefox but the older version keeps coming up. How do i get the newest version to over-write the older - according to my info i am using 25.0.1 which seems to be the newest version but i have some website saying i am using an older version. I have windows vista 2007

    Also, the "FBSMTWB" that appears in your current user agent string (you'll see it in about:config when you venture in there) is associated with an extension that many people find annoying -- unfortunately I can't recall which one it was.
    If you haven't reviewed your extensions for a while, you might want to see whether any deserve to be disabled or removed, particularly if they are nonessential or unrecognized. To open the Add-ons page, either:
    * Ctrl+Shift+a
    * orange Firefox button (or Tools menu) > Add-ons
    In the left column, click Extensions.
    Usually a link will appear above at least one disabled extension to restart Firefox. You can complete your work on the tab and click one of the links as the last step.
    Hope that prevents your user agent from being changed back to that old version.

  • Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q with a real time mode but it is not working but when i run it with uploading it into the PXI it save in to the file

    Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
    Attachments:
    PWMs.vi ‏130 KB

     other problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2

  • How to over write VBBE data when Delivery is created if at the time of SO creation stock blocking is there

    Hi,
    I want to know how to over write VBBE data after delivery creation if stock blocking is there at the time of SO creation.
    That means I want my confirmed delivery quantity to over write the SO quantity in VBBE table after delivery creation. Please help me with your valuable suggestions...
    Thanks
    Tanmoy

    Hi Tanmoy,
    This should happen automatically. The VBBE entry should reflect the quantity of the delivery requirement. Is it possible for you to post screenshots illustrating exactly what is happening on your system?

  • After install of Mavericks, it looks like my system kernal panics and just sits there. I tried waiting over two nights. Tried reinstalling twice, booting r/s. Recovery partition now has Mavericks as OS. Im running a iMac i3 27 inch circa 2011. Any ideas?

    After install of Mavericks, it looks like my system kernal panics and just sits there. I tried waiting over two nights. Tried reinstalling twice, booting ro the repair partition and repairs permissions/drive/verify , with no problems. Tried reseting PVRAM(or whateverit called). Recovery partition now has Mavericks as OS. Im running a iMac i3 27 inch circa 2011. Any ideas? Can still bootcamp into windows.
    Thank you

    bhadotia wrote:Anyway's the file downloaded from dell to update the partition for Studio 1555 is corrupted (checksums don't match). My partition still doesn't boot. I'm working to fix this and will update my post when I'm done.
    The file seems to create the CD/DVD/Image and USB just fine. So I used this only to create a CD image which I then wrote on a blank CD which seems to work fine. Also, I played around a bit and had some partial success in booting the partition. I've updated my original opening post with the new findings.
    Whew!! what a waste of time! Never want to do all of this again .
    Last edited by bhadotia (2012-03-03 00:05:22)

  • If I sync apps with migration assistant, will it over-write the newer iLife apps on my new MacBook Pro?

    I purchased a new MacBook Pro (Mountain Lion) and connected it to my existing iMac (Lion) to transfer over my user account, music and applications.  It did not occur to me that the process might over-write the iLife apps already factory installed on the MBP.  I am having trouble checking if that happened, but getting info on both iPhoto and iMovie shows that they are 32-bit applications (Calendar, Contacts and iMessage just show as "applications" without saying if they are 32- or 64-bit).
    What version numbers should all those iLife apps be? If I have over-written them, what would I have to do to restore the factory installed versions at this point since the MBP does not come with install disks anymore?

    MacJack: I did the migration when started up the computer for the first time.
    As for suggestion from Mende1, it sounds like a great idea, but if I did over-write what was already there, will the App Store charge me for the apps if I did not buy them through the App Store (since they came pre-installed on the MBP)?  If so, I would prefer to take the MBP to an Apple store with the receipt and offer an explanation.
    Would knowing the version numbers of the software I now have installed be enough information to know if they were the versions that came pre-installed on the MBP under Mountain Lion?

  • Any way to change speed of a clip in "over-write edit" mode?

    I want to change the speed of a clip in the timeline without having to lock all the other tracks or having to move the other following clips out of sync. For example I have a clip which lasts for 1 sec, which I want to change to 3 secs. Normally when I do this in the timeline the other clips on the same video tracks which follows, will move their position..... How to change speed in "over-write edit mode"?

    I think it's even easier to just match frame the "source file"... put your playhead on the clip you want to speed change in your sequence. Then type optioncmdf. Perform the speed change in the Viewer, then simply cut it in... Might help to put it up above the older, use the double arrow selection tool facing right to move the clips past this change later... pull the upper track speed changed clip down over the old, and viola.
    Gotta say though, it's a lot easier to perform the speed change in the Viewer, and edit it all in as you go rather than doing it after you've put the clip in a sequence. (not always possible to determine what the speed change should be maybe, but sure easier.... FCP 7 handles this problem a lot better for sure, and worth the upgrade price if your machine is compatible.
    Jerry

  • Over- writting a condition type in sales order

    Hi
    Our requirement is that in a sales order, we should be able to over write determined pricing for a condition type. We are able to do this also using option "manual entry has priority" in condition type configuration.
    Now problem is coming when I replicate it to ECC. In this case over written value is redetermined. I have set middleware parameter so that manual entries are not redetermined on replication, and it is working fine for entries that are not over written but entered specifically manually.
    Please help me in resolving this.
    Thanx in advance.
    Cheers
    Hits

    Hi
    In SPRO in SD Basic FnsPricing near to Condition type config we can set upper and lower limits for a condition type
    Here you can try by inputting limits
    This is basically for creating condition records only
    I am not sure whether this will work for your manual condition type
    But you can try
    If this fails
    Check this link
    http://wiki.sdn.sap.com/wiki/display/ERPLO/UserexitforRestrictingUserModifyingConditiontypeinSales+Order 
    In this  user exit you can do the coding as per your requirement
    This link is for  different purpose
    But  this exit
    USEREXIT_PRICING_PREPARE_TKOMP in the include MV45AFZZ.
    can be definately used to meet your requirement
    You can maintain the ZEE table with upper and lower limits maintained and do the necessary coding
    Regards
    Raja

  • I keep trying to burn a CD-R in Iphoto, and every time iPhoto stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with d

    I keep trying to burn a CD-R in Iphoto, and every time iPhoto stops burning halfway through and i get this error message, "Attemp to burn a disc failed. Burn failed due to a medium write error." I am using memorex CD-R's and have tried with 4 times with different CD's. Is this a software or hardware problem? Any info would be awesome

    Export the photos to a desktop folder, right click on the folder and burn to disk - see if that is any different
    LN

  • Over-writting Customer Exit Value

    Hi,
    I've a "customer exit" variable 'Z1', which is allowed "ready for input" as well. Z1 is based on 0FISCPER and I set the variable to current date using customer exit in I_STEP = 1.
    Based on the value contained in Z1, I calculate date ranges for two other customer exit variables 'Z2' and 'Z3' in I_STEP = 2, to make default criteria for report. And reports shows values of Z1, Z2, and Z3 in each column respectively.
    As Z1 is "ready for input", it allows user to enter value and change shows in Z1 column but Z2 and Z3 still being calculated on initial value of Z1.
    Please let me know how it is possible to over-write the initial value? Process flow would be: if user enters any value in Z1 it should ignore the initial values set by customer exit.
    Your urgent help would be highly appreciated.
    Regards,
    Shabbar

    Ali,
    You are on the right path. Calculate the default value of z1 in i_step = 1, and then calculate z2 and z3 in i_step =2. If the user enters the value , then z1 will have the user value.
    -Saket

  • HT201320 I have tried for over 2 hours in trying to set up an email accout and followed the directions. I keep getting same error message over and over again. Invalid use rid or password

    I have tried for over 2 hours to get email on my phone. Shut off and on and tried to pick new password. Keep getting error message. Very frustrated

    Since the title of your post says " ... invalid use rid or password ...",  I suspect the issue is some illegal mix of blanks and/or special characters (e.g., punctuation) in either your user ID, password, or both.
    Be very careful you are following the rules for what constitutes a legal user name and a legal password.

  • My ipod touch 4th generation 32gb will not turn on ive tried holding the on/off button down for 10 and more and also the home button and it will not turn on, i have tried this over several days and still no response

    my ipod touch 4th generation 32gb will not turn on ive tried holding the on/off button for more than 10 seconds and still there is no response i have tried this over several days and nothing is working - i have checked the charger and also have tried charging from the laptop so this isnt the problem - please help as i have not been able to use it fr ages

    Try here:
    iPod touch: Hardware troubleshooting
    Also try placing the iPod in recovery mode and then try to restore via iTunes.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • I'm trying to read some XML data from temperature logger over my network. I'm using LabView version 2009 sp1. I'm using the URL Get Document Vi. It works fine when using Internet sites like google or foxnews etc...

    I'm trying to read some XML data from temperature logger over my network.  I'm using LabView version 2009 sp1.  I'm using the URL Get Document Vi.  It works fine when using Internet sites like google or foxnews etc...
    When I use it with my temperature logger most of the time I get an Error 66...but some times it does work and actually retrieves the document. 
    I can use the same address "http://172.22.21.68/XMLfeed.rb" (Internet Explorer or Google Chrome) in my browser and get a response every time.  When accessing from my browser the server in the temperature logger does take around 6 seconds to respond, but it does respond every time. 
    Is the URL Get Document Vi exceeding a timeout?  If so, where can I set it to wait longer?
    Attachments:
    Error 66.jpg ‏183 KB

    It looks like the TCP Buffered Read has a 2.5 sec timeout, I believe that is where I had trouble as well.  Try creating your own URL Get HTTP Doc vi in which you call URL Get Document in normal mode, with an appropriate number of characters to fetch (enough characters so that you capture all the important data in the XML file).
    Attachments:
    ex1.PNG ‏33 KB

Maybe you are looking for