Problem in Depreciation Run.

Hi Experts,
During depreciation test run I am getting the below errors in error log.
1) Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 20
2) Message(s) when structuring line items for document number ERROR00001
Message no. AAPO510.
Kindly help...
Thnx & rgrds,
Satya N Padhy

Hi,
You have not maintained the GL account for Accum Dep - Ordinary Dep to the asset in AO90.
Please go to AO90 and enter your COD->Your COA->Account Determination->Select your Account Determination Key->Depreciation-> Enter the GL account Number for Acc.dep. accnt.for ordinary depreciation
SAVE and now run the AFAB.
Regards,
Srinu

Similar Messages

FI-AA : Problem in Depreciation Run and Year end closing.

i am doing asset year end closing and new fiscal year open, i followed the steps as followings..
Step 1 Did depreciation run using T-code AFAB- no error
step 2 checked depreciation run in AFAR was correct(no error)
step 3.did actual run of new fiscal year open using tcode AJRW.
step 4 : did actual fiscal year closing t-code AJAB.
but now the problem is still i am not able to see any asset reports when open the report meg. says "fiscal year change not done for company code xxxxx"
problem due to is any patch need to be executed? or due to any other application error?, pls advice to solve this my issue.
with best regards,

Hello
Choose Periodic processing ® Fiscal year change.
Enter the company code and the new fiscal year.
Choose Program ® Exec. in background.
Process the assets with errors that were identified during the fiscal year change (Tools ® Assets with errors).
Reg
*Assign points if useful

Problem in depreciation run -AFAB

Hi,
I hv uploaded asset balances as on 31.03.07 (FY2006) and closed the period . Subsequently, while trying to execute depreciation run in 2007 (period 1) system is giving error " year 2006 is not closed"
while trying to run afab for period 12 in 2006 msg being thrown is " yr 2006 is closed".
Can anyone give solution to this.
we r i ECC 5.0 , but hv not activated document splitting.
thanks in advance
saibal

Hi,
Pls goto OB52 and open the previous period. then try dep run.
after dep run again change period close back to normal.
during this period change do not post any finacncial entries.
Thanks

Problem with Depreciation Run

HI,
while doing a depreciation user is getting prob that No value for profitability segment.
help me out as soon as possible.

Hi Andreas,
thank you for your reply.
in 46 C, the field is called Session Name (RAREP-GROUP). Have no clue if that helps.
What program is called when you run AFAB in 46C?
I get RABUCH00. If you view the coding then look at line 82 (in the SAP standard version):
BDC-Steuerung
SELECTION-SCREEN BEGIN OF BLOCK BL5
                 WITH FRAME
                 TITLE TEXT-C02.
PARAMETERS:
          P_GROUP LIKE <b>RAREP-GROUP </b> DEFAULT 'RABUCH',   "Gruppe
          P_HDAT LIKE RAREP-HDAT   DEFAULT SPACE,      "Sperren bis
          P_KEEP LIKE RAREP-KEEP   DEFAULT SPACE.      "Mappe halten
SELECTION-SCREEN END OF BLOCK BL5.
This coding is missing from the program used in ERP 2005 to call AFAB (RAPOST2000) thus we cannot type in a session name - which is what we use later on in SM37.
SAP must have its reasons and I am looking forward to hearing them.
What I am looking for is a workaround to the issue so that we can still run our testing before posting.
Ryan

Process for reverse wrong Depreciation run

Hi,
We have a problem in Depreciation run that user had already run wrong Depreciation. Now we need to reverse it and Post correct depreciation again...
How can We do it...please let me know the process of reverse the Depreciation run.
Regards...

Hi Anil,
Depreciation posting once done cannot be reversed as there is no reversal code for Depreciation.
But SAP has given you the option of posting corrections in the system..
Suppose you have executed the AJAB and before moving on to the next month, you realize one Asset is to be retired in this month itself.., then post the retirement entry in the current month, and then again run AJAB with a repeat run selection.
What system would do in this case:-
System will reverse the depreciation with respect to the date of retirement in the current month, adjust the net Book value as per the sale amount only for the asset that you are selling..
All these adjustments will take place only for one asset which you are dealing with..and the balance all other Assets will remain unchanged as there is no change in any of the Assets. This is what the repeat run does..it passes only incremental or differential postings with respect to the last run of Depreciation in the system.
You do not do anything manually for posting Depreciation..
Regards,
SAPFICO

Depreciation Run Problem

Hi Experts,
When I executed depreciation run for the year 2010, operations were successful. There were no problems that occurred during the process. Now, I'm doing depreciation run for the month of January 2011. Why is it that the status says "no postings"?

Hi,
Whether your question is related to Fixed Asset addon? If yes, it's better to post in [this forum|SAP Add-Ons;
Regards,
Bala

Depreciation Run executed for a period but no posting found

Dear Experts,
I have checked a few of the FA in the Fixed Asset Master, and confirmed that they have not been depreciation run yet for period "2009-02". My current period is set to "2009-02" as well.
But when I tried to run depreciation run for "2009-02", I always get no posting.
What could have cause this problem?
Much Thanks in Advance!
Warmest Regards,
Chinho

Hi Chinho,
1, please make sure there is APC value for the asset. Means:
acquisition was created for the asset. You can check it from FA master data->document tab
Or the asset was imported into system with a APC value.
2, If the acquisition/import was done before current fiscal year, please make sure 'fiscal year change' to current fiscal year was done.
Regards,
Ivy Zhang
SAP Business One Forums Team

Error in depreciation run - assets under construction

Hi!
Could someone please help me with the following:
My customer has a large amount of assets under construction (AuC) and also other assets. None of the assets under consctruction should have a depreciation key (or depreciation key 0000) and no depreciation accounts are allocated in transaction AO93 for AuC . But my customer now has incorrectly created a few AuC (that should NOT be depreciated at all) with depreciation key LINK. What happened?
1) Test run depreciation (AFAB) for all assets in period 1 during 2010. In test run no error log was created, everything looked fine.
2) Executed depreciation in background.
3) When looking at each of the assets in transaction AW01N I can see that all assets (both real assets and AuC with depreciation key) has depreciation posted in period 1. BUT, no depreciation has been posted in general ledger on any of the asset classes!
4) I have now changed the depreciation key on all AUC in AS02 to 0000 so that no depreciation will be calculated.
5) Trying to run AFAB again for period 2 but error message says that period 1 was terminated and that period 1 should be restarted.
6) Trying to run period 1 again in AFAB with restart but error message says "Account 'Acc.dep. accnt.for ordinary depreciation' could not be found for area 01" and refering to all of the incorrect AuC that I have corrected (to no depreciation key)
Please how can I go on? I want to reverse the depreciation in period 1 since I didn't get any posting i the general ledger. And then I want to make a new depreciation run only with correct assets (only depreciation on real assets, not on AuC).
Please help!
I am very thankful for any help!
Many many thanks in advance!

Hi, Can you please how the issue is solved because i have the same problem which i need to resolve immediately. Please reply me as soon as possible
with regards,
Prabhakar

Problem with depreciation posting for an asset with a '0' net book value.

Hi,
I have a problem with depreciation posting on one asset. I think it should not be calculated and posted at all.
On 1st November 2010 (our Fiscal year starts on 1st November) there was acquisition posted to an asset and then it was reversed on the same day - so the net book value was '0'.
In AFAB depreciation run for April 2011 - it posted depreciatoion of 0.01 Euro, so now the book value is -0.01.
Do you know how this could have happened and what can I do to get the value of this asset back to 0?
Thank you,
Karol

Hi Murlidhar,
Thank you for your reply.
I just have one doubt - as depreciation of 0.01 Eur was posted in previous period leaving net value of asset equal to -0.01 Eur.
Shouldn't I get ritd of this asset value before I proceed with the steps you suggested?
I think it is not possible to reverse the depreciation - so I struggle to find a way to bring asset value back to zero.
Thank you,
Karol

Depreciation run 'stuck' in a closed period

Dear experts,
I have the following issue (PROBLEM )
Depreciation ran in Jan - no issues. Dep keys for 2 assets were updated in Feb from 0000 to an automatic key Z..., as a result depreciation was recaclulated as of Jan. Then user, by mistake, ran depreciation for Jan again to 'catch up' deprn on these 2 assets. He got an error log - period 01 is closed, which makes sense. In aw01n Jan now shows as green - posted, but when you drill down you see that Jan depn has not been posted and you see the error log again
Now the user is trying to run depn for Feb and gets the following message: Sorry, you had a run that was cancelled in Jan, you have to restart Jan first before posting Feb. There is no way Jan can be opened.
What I've tried:
changed key back to 0000, run AFAR to recaclulate deprn back to zero for these 2 assets, hoping to re-run AFAB for Jan for these 2 assets to get zero and have depn unstuck...didn't help.. still get an error message - period 1 is closed.
Please advise...

Thanks Bernhard -
What is the difference between XBUKZ: 1 Restart Batch-Input and XBUKZ: 0 Restart Setup ANLP. And how to restart TABA? thought that new depreciation run uses the "direct" update of the depreciations via the accounting interface, not batch input like old depreciaton run, so was surprised to see description of XBUKZ: 1
Another question: if the period is opened wouldn't it be easier to run depreciation in period 1 in restart mode?
I was considering to delete records from ANLP - planned derpn and to be posted depreciation... tested it, works okay (delete records, restart depn in closed period 1, no errors, no documents posted, period 2 planned depreciation can be posted. Not sure what is better from the SOX point of view - open closed period or update internal table in prod....:-(
Thanks a lot for your reply...
Elena

Depreciation run after adjustment in period 14,2007

Hi,
My user has posted adjustment to an asset in period 14. All other periods are closed. Period 13 is already closed and cannot be opened again. And actually, we have run depreciation in period 13.
However, when we want to run depreciation in period 14, system prompt error message and ask to restart run depreciation in period 13.
I am in version ECC5.0.
Now I am confused as the depreciation run is automatically released and therefore, we cannot release the batch in foreground and change the period manually.
How can I resolve this problem?
Thanks.
Rgds,
Nik

Hi Nik,
we solved a similar problem as follows:
1.) Open period 13 again
2.) Run depreciation with "restart" in period 13
3.) Cancel FI document in period 13
4.) Close period 13
5.) Post FI document in period 14 manually
Maybe this will help you solve your problem!
Best regards,
Walter

Depreciation run for Business area

Hi all
We design some business areas are belong to 1 company code.IF each BA want to depreciation run by itself
How to depreciation run independent for each BA. If anyone know it, please teach for me.
Thanks all
Tora86

Thanks Sridevi
I know that depreciation run at companycode level. But my project have some difficult problems, So I want to find way depreciation run at BA level. we can config or customize anything?
Thanks all
Tora86

Depreciation run for previous years

Hi Experts,
I am in Development system where the depreciation run has not been carried out since 2007 as per OAAQ. Now when I try posting depreciation for year 2008 period 1, it throws this error "You can only post in new year after closing previous year". However, 2007 is already closed.
Again when I try to close the FY in AJAB, it throws this error "No year end close is necessary for co. code XXXX".
Also, I don't find any table entries for TABA and as per table T093b 2007 is the closed FY.
So, my question is how can I carry out the depreciation run for all these years to bring the system to current FY.
Additional information you might require is OB52 is having period open from 1/2014 to 12/2016. and Planned ordinary depreciation has been carried out for some of assets till 2009 as I can see in table ANLC.
Thanks in advance
Regards
Sukham

Hi Sukham,
ok, the problem is that you have values for the last posted in T093D, which may come from a legacy data takeover.
You have 2 options right now:
1) Implement and run the correction program from note 144441
2) Either clear or set the last posted depreciation period in the IMG for FI-AA legacy transfer to 12 (or use the correction program from note 26073)
Regards,
Markus

Problems posting depreciation for legacy assets taken over

We recently loaded conversion balances for asset with a takeover date of Aug 2nd, with various prior capitalization dates. The date of last depreciation posted was set as Dec 31st 2004. When we try to post unplanned depreciation for all of 2005 in December, the system says depreciation for period 12 was already posted, so do a repeat run. There was no depreciation actually posted for period 12, because there were no assets before today. A check of the expense account and depreciation report and a search by depreciation doc type confirm this.
When we try a repeat run, it says cannot do it for period 12, need to do it for period 000. When we try it for period 000, it says no depreciation areas to post to. The config has been checked and the depreciation areas and posting periods are set up correctly. The load, the depreciation posting and all steps for closing of asset fiscal year were successfully carried out in DEV and QA. The only difference in PRD is that the year was closed before the load, but we reopened it.
Also, the opening balance in the asset history sheet for 2006 does not agree with the closing balance for 2005, the difference being the planned depreciation amount. The FI-AA reconciliation report RAABST02 also shows a difference only in the Accum Depn accounts, equal to this figure. So clearly the system THINKs depreciation was posted. When we try to close asset fiscal year it says depreciation was not completely posted for 2005, but it won't let us post it. HELP!

I tested this whole thing in DEV and QA before we did the same process in PRD, and I was able to run depreciation in those clients, so I think the problem is specific to PRD. As I mentioned, the only difference in PRD is that we had closed the fiscal year so I had to re-open it to perform the load.
Yes, the problem I have been experiencing has been for Dec 2005 and I don't expect there to be anything in TABA because the system simply will not let me post depreciation of any type, for any period in 2005. I've tried it for period 8 as well. No matter what, it keeps insisting that depreciation was already run for period 12 2005 and to do a repeat run. When I try a repeat run, it says 'the last posting run was for period 000' and that only period 000 can be posted in the repeat run. When I try doing it for period 000, it says "there are no areas to post to".
I did try to reverse the Y/E close with OAAQ for 2005, but still no luck getting depreciation running. So you see why resetting it was looking like a good option? :-0

Error in Depreciation run for 7 th period

Hi Guruu2019s
When we run depreciation run year 2008 for period 7 has failed with the following error :
Account 'Accumulated dep. account unpl. deprec.' could not be found.
however it has posted to few assets and not posted to few assets, when I checked in the log for posting run there is a message saying that u201Cthere are error in the posting run.after correcting, restart the run.
u201C2documetns were createdu201D
If I go to previous log for posting there is no error message and it says with green signals that 3 documents were created. From 1 to 6 periods, in every log says that 3 document were cresated
Only this particular run says 2 documents were created.
Any advise?
Thanks in advance
Regards
Sunitha,

It looks like that in period 7, you do the first "unplanned depreciation". That's explain why the error only happen in period 7.
The problem happens because GL account for "unplanned depreciation" is not created.
Try to check in t-code : AO90 => Choose your Chart of Account => Choose Account determination for asset class in which you did the unplanned depreciation => Choose Depreciation => Check all GL accounts assignment in "UNPLANNED DEPRECIATION ACCOUNT ASSIGNMENT".
Then check in t-code :FS00 whether the GL Accounts (in "UNPLANNED DEPRECIATION ACCOUNT ASSIGNMENT) are exist or not.
If the GL accounts are not exist then you should created the GL accounts first. Afterwards, try to running the AFAB again using "Restart".
Good luck.

Problem in Depreciation Run.

Similar Messages

Maybe you are looking for