Trying to understand the Music app... Genre question

K... There are so many problems I have with the Music app, but this question is the focus on one.. I understand that I cannot play an entire Genre of music in iOS7 (without creating a Smart Playlist for each Genre from within iTunes), and I've come to terms with that....but I just realized I can't even see the specific songs that genre has.
I dunno how to explain it, but I'll try...
I have all of Adam Lambert's albums in iTunes and I have right clicked songs and set them to specific genres, some are pop, some are rock, and I have one lone Adam Lambert song in my "Dance" genre. On my iPhone, with iOS7, I go to the Music app...tap Genres...tap Dance...and it shows Adam Lambert...so I tap on it and it shows me ALL 70 songs, NOT the one single song I have listed in the Dance genre. Now, if I go to Genres on iTunes and go to the Dance section, then that one single Adam Lambert song shows up. This occurs with every artist, not just him. If I go to Rock, it shows all of them as well. It's as if...if you have an artist with a song in multiple genres it decides all of the songs should be in all of those genres. What's the point of it?
I don't understand the point of the Genre section on the iPhone if I can't even sort my stuff correctly. Am I missing something or is this just how it is now?

Have you read the manual for this plugin?
It explains what High and Low refer to, and of course all the other parameters.

Similar Messages

Voice Over and the Music App

I am trying to use the voice over feature but it tries to play the music app when turned on even when the music app is not open. Can anyone help me. It is too confusing to try to hear what the screen is showing.

Force close the Music apps in the muti-task window.
1. Double tap the home button to bring up the multi-tasking view
2. Swipe the app's windows upwards to close
3. The app will fly off the screen
http://support.apple.com/kb/ht5137

Why isn't there a shuff sellection on the genres playlists in the music app?

I have a hard time trying to figure out what or who I want to listen to all the time so I like to shuffle a Genre. Before IOS 7 I could go into the music app, go to a specific genre and stuff and artists and songs by touching the stuff button. I have realize that in IOS 7 that option is no longer there and the only way to do so is to ask Siri. the only problem is if I don't have service at the time or I must be descrete, asking Siri is not an option. is there a plan to place to stuff button back into the genre play lists?

There are some wireless external hard drives that can be used with the iPad.
Best iPad External Hard Drive Storage Options
http://www.unlocktips.com/2012/11/best-ipad-mini-external-hard-drive-memory-stor age-options/
iPad Storage Solutions
http://www.ipadstoragesolutions.com/iPadWirelessStorage.php
SanDisk Connect Wireless Media Drive
http://www.sandisk.com/products/wireless/media-drive/
WD My Cloud
http://www.wdc.com/en/products/products.aspx?id=1140
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
Samsung Wi-Fi External DVD RW Writer USB Optical Drive
http://www.maplin.co.uk/p/samsung-wi-fi-external-dvd-rw-writer-usb-optical-drive -a51lf
 Cheers, Tom

TS1629 Trying to set up home sharing on my ipad and when I click on the music app I don't have an option to slick ''more". It's just a grey screen that says no music..

When trying to view shared playlist, or any music for that matter the music app is blank. All it show is no music in the middle of the screen and a play button in the top right corner

Howdy Togifink,
I think I found the perfect article for you. Named Troubleshooting Home Sharing it can be found here http://support.apple.com/kb/ts2972.
1. Set up Home Sharing on all devices
2. Verify system requirements
3. Check your Apple ID
4. Check your network connection
5. Check Firewall Settings
6. Quit and reopen apps and iTunes
7. Restart your network router
8. Cannot access my library when my computer is asleep
Each step in the article is accompanied by screenshots and instructions but this is the basic over view of where the troubleshooting will take you.
Take care,
Sterling

I am trying to put the music from my ipod onto my new computer. After installing itunes and connecting my ipod touch a message comes up saying that my ipod is already synced with another library. What can I do to sync it with a new library?

I recently got a new computer and got rid of my old one. I am trying to put the music from my ipod touch onto my new computer but keep getting a message saying that my ipod is already synced with a library and cannot be synced with more than one. How do I access that library on my new computer and if I can't are their other ways for me to put the music on my ipod into my new computer?

Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your iPod manually before syncing, you can restore your device from that backup again. A manual backup does not include the sync process.
Disable autosync in iTunes, connect your iPod to your new computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your iPod for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread:http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0
About backups and what's saved: http://support.apple.com/kb/HT4946
How to back up and restore:http://support.apple.com/kb/HT1414
How to download apps for free again:http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device

Every single song I delete from iCloud on my Mac remains listed in the Music app on my iPhone 4S, and then becomes broken -- What the heck?

Hello,
So this is annoying me to no end because I just spent $25 to sign up for iTunes Match and so far its wasted my time and given me nothing but a massive headache. This is obviously a major bug on the SERVICE END, not mine.
Starting with an empty iTunes library on my Mac, I began ripping my CDs in iTunes Plus AAC format the other night with the intent of matching & uploading my entire music library into iCloud for streaming & downloading to my iPhone 4S on the go. Simple in theory, right? After some basic tag editing -- changing genres, a simple alteration to a title here, deleting the composer there -- and then updating iTunes Match (Store > Update iTunes Match), I notice I'm getting duplicates of a bunch of my songs appearing on my iPhone. I haven't downloaded anything to the device, they're all just listed with the cloud icon next to them.
So I'm thinking, whatever, I screwed something up. I'm only several CDs into the process so I'll just delete the iTunes library and start over again. Shift + right click, delete everything. Do you want to delete these songs from iCloud as well? Yes. Update iTunes Match. There are 0 songs in iCloud. Okay.
The songs are still showing in my iPhone Music app. Strange. Swipe to delete does nothing, they're not on the device. They're pointing to files in the cloud that are either no longer there or somewhere that I cannot access anymore. Broken aliases. The album artwork still shows up, but playing the songs just kicks me back to the album menu. Navigating to Settings > General > Usage > Music shows me there is no data on the device. 0 bytes.
One thing I notice is that sometimes after syncing a handful of these broken songs will show up in a "Purchased" playlist on my iPhone within the iTunes browser -- I haven't purchased any music from the iTunes store, not one song -- and inspecting them with right click > Get Info reveals them as Stream files, not iTunes Plus AAC files.
Turning iTunes Match off and on again both from within iTunes and on my iPhone does nothing.
Syncing wirelessly or via USB does nothing.
Backing up and restoring my iPhone does nothing.
Double clicking the Home button and quitting the Music process, then opening it again does nothing.
Hard resetting the iPhone does nothing.
This is something that's happening with my Apple ID on the service end, not locally or on the user end. As long as iTunes Match is turned on in my iPhone settings, all of this broken music -- everything I've matched to iCloud and deleted -- shows up. I've done everything within the parameters of proper usage, and iTunes tells me there is nothing in iCloud after it updates but my phone keeps seeing crap that isn't -- or shouldn't be -- there.
I WANT to use iTunes Match, I just paid 25 freaking dollars for it, but its completely busted for me right now and I know ripping and matching some more CDs is just going to make it worse and populate my iPhone with an even bigger broken library. I just ripped and matched one more CD an hour ago without editing any of the tags, just let iTunes Match do its thing, and then after right clicking and following the prompts to delete the 18 songs both from both iTunes AND iCloud its still showing up on my iPhone. Busted like all the others.
Can we please get an update on this as soon as possible? This is driving me nuts and I don't know what else to do.

It's a slightly convoluted process.
Disable iTunes Match on your iPhone
Settings > Music > Itunes Match
Now, make sure you've killed the Music app by double-tapping the home button, and deleting the app there where it is running. Important step. The app should not be active.
Next step:
Settings > General > Usage (it takes a while to load) > then delete the Music app there
Power your phone down, and back up again.
Sync your music via iTunes like you always have ...
... and this should fix your problem.

Why can I no longer watch music videos in full screen mode via a playlist in the music app since upgrading to ios7?

Since upgrading to ios7 my iPhone 4S no longer allows me to watch music videos in full screen mode when I select the clips via a playlist from the music app.
It's now more necessary than before to use the music app rather than the video app to select music videos to play. That's because the video app doesn't list music videos by artist any more. And also because the fast forward and rewind buttons on headphones remote no longer work on videos.
How do I watch full screen videos when rotating my iphone now shows my music library rather than showing the video itself?

I do not think it is a problem to play videos in the full screen mode using the video app. It should work just fine, it does work ok for me on iphone 5. The original question was to play music videos in the music app. Music videos and videos are two different things - I am not sure why but they are.
The problem here is that the music app supports lists and the video app does not. I just looked at the ios7 video app and while my few test videos are shown in it, the lists they were in (in iTunes) are nowhere to be found. There is no lists in the video app - period - which is as it was before.
The video app plays videos and music videos in the full screen mode no problem but if you have a few hundreds or more of such videos you will have hard time finding the one you want to play. There is simply no way to categorize or group videos. The old good folders/directories are, I guess, too simple for Apple. It is just too bad that for years on end the world's leader in S/W development did not offer anything to categorize videos.
You have lists, albums, etc., for music, you have albums for pictures but you have absolutely nothing for videos. And this is and has been the Apple's state-of-the art solution for this problem - simply insist that the problem does not exist. Actually it is getting worse. Not only there is nothing to categorize or group videos but now the only way it could be done (by marking videos as music videos and using the music app) results in a mini playback area.
Soon this OS will be able to cook dinner for your but grouping videos... no way.
What is happening here???

On my iPad3, in the Music app, I can find my video playlists in my iTunes library, but they are all empty. This works fine on my iPhone4. Does anybody know what the problem is?

BACKGROUND: When I'm home, using my iPhone4 and MacPro/iTunes library, I've been watching video on my iPhone via the Home Sharing feature of the said devices. I have lots of videos in my iTunes library, so I've set up lots of video playlists to help organize stuff, and also to more quickly zone in on the video I want to watch from my iPhone and AppleTV. So here's the process I go through when I want to watch a video on my iPhone: go into the Music app, then hit the "More..." selection (along the bottom right of screen), then hit the "Shared" selection, then hit the "Bob's iTunes Library" selection, then hit the "Playlists" selection (along the bottom left of screen), then find/select the video playlist of choice, then find/select the video of choice, then start watching. Aside from the occasional spontaneous disconnect issue I've been having lately, it all works like a charm.
(NOTE: I tried the same procedure using the Videos app on my iPhone, but there doesn't seem to be a way to see the video playlists in this app.)
TO THE PRESENT: So when I got my shiny new iPad3 this Monday, the very first thing I did was try to replicate this process on the iPad3. Because both the Videos app and the Music app look very different on the iPad vs their iPhone counterparts, I tried this using the Videos app first, but ran into the same problem as on the iPhone - there's no way (as far as I can tell) to view/access the video playlists in this app – all I see are icons, one for each video. I then tried the Music app, and steps are identical to the iPhone version. I got as far as getting to see my playlists, and then selecting the video playlist of interest, but once there, no videos are in the playlist, only a single song(??). In fact, none of the video playlists have any video files in them (some have song tracks??).

Same problem on my ipad 2...but it works well on my iphone 4s.
Can somebody help me?
Thank you

I'm trying to transfer the music from my iPhone 3G to my iPod shuffle but I don't know how. I checked on websites but i dont really trust them cause I don't want all my music to be erased (cause i spent a lot of money on them) can someone PLEASE help me.

'm trying to transfer the music from my iPhone 3G to my iPod shuffle using iTunes but I don't know how. I checked on websites but i dont really trust them cause I don't want all my music to be erased (cause i spent a lot of money on them) can someone PLEASE help me. Why is iTunes so complicated.

iTunes match - http://www.apple.com/itunes/itunes-match/ - see FAQ at end too
http://arstechnica.com/apple/2011/11/itunes-match-your-questions-answered/
http://ipod.about.com/od/UsingiOS5/a/Itunes-Match-Frequently-Asked-Questions.htm
http://forums.macrumors.com/showthread.php?t=1277415 - deleting items from your computer but saving them in iCloud. Yes, but risky.

The Music app on my ipod touch will not open?

The Music app on my ipod touch will not open, it loads but the sceen is always blank and then closes the music app and goes back to my list of apps.. what do i do? any ideas?

I have the same problem since a couple days ago, I will try to refrain from swearing or slagging on Apple, got a few questions for you, Gerbrandt, or anyone else who's had this problem and worked around it by means of a 3rd party app:
1-Since using panamp have you used your ipod in any docks successfully? (ex: I have a JVC car deck, a Klipsch dock and the Yamaha dock for my home theatre, all will be worthless if I can't resurrect my iPod as a music player)
2-Has using panamp done anything to help the original Apple music app to work or has it stayed dead?
3-Do you have any smart playlists? Like others with the 64GB model I have many many songs (that's the WHOLE point of the large capacity iPod, isn't it?) and I found that the more smart playlists I had the worse the apple music app behaved back when it was still working.
I'll check out panamp tonight, hopefully that will stop me from curb-stomping my iPod.
Anyone know whether an Apple "genius" has access to any sort of debugging facilities that would make it worth visiting the store for help on this matter? (ex: if they have root access to check for corrupt song database, or debug logs of some sort, or can do any direct manipulation of commands over the dock connector).
It sure would be nice to know why this happens, I have about 14,000 songs locked in iTunes now and many hours of time invested in ripping my CD collection but I don't want to buy a replacement iPod only to have this happen to it too. It's annoying enough the 4 hours it takes to resynch after a system restore (which in the end did nothing to resolve the original issue).

After iOS7 update I cannot launch the music app. It crashes after a few seconds of white screen. What to do?

Just updated my iPhone 5 (16g) to iOS7 and now I cannot launch the music app anymore.
It opens and then just crashes after a few seconds of white screen.
Also If I go to Settings General About the phone crashes all the time after just a few seconds. :-(
Andreas

The same for me. iPhone 4S, itunes match and upgrade to ios7 by air.
So what we have:
1) Music app does not launch (white screen then close)
2) About screen crashes (I guess once it tries to calculate music space)
3) Spotlight does not show any results (no care what I set to search in in the preferences)
4) iTunes Match slider can not be set to Off. However, it is possible to logout from AppleID, then it off. But this does not change the situaton at all
5) Podcast app does not launch
I tried to reboot, to sign in with another Apple ID, to turn off itunes Match, to reset all preferences. Nothing helps.
Things to try:
- reset all preferences and content
- reinstall ios7 with itunes from scratch
- switch to windows phone

I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. any soln ?

I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing wireless network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. I am using a set of speakers from kenwood connected to the airport express. The operating system on my macbook is mac os X 10.5.8. i am sure it is not a problem of streaming music online because i have even tried playing music which are stored in my macbook.
Is there any problem with the setting in itunes or quicktime ? Kindly reply...... I am waiting for your valuable suggestion.
Thank you a lot in advance.

I am shocked to have found this same AX audio dropout problem starting TODAY, every few seconds the audio just drops for a couple seconds and then resumes: Latest software versions of everything. No iPad, iPhone or Touch. Internet hardwired to D-Link DES1105 (1000baseT Switch) hardwired to new 80211N AX, AX optical to stereo, AX Wi-Fi internet to basic 1st-gen MacBook operating at 80211G, and an older 'G' AX extender at the far end of the house, away from all this. The MacBook streaming iTunes is usually 12 feet from AX. I've used this setup for years of trouble-free AirTunes / Airplay until today. Today I also found 2 very reliable fixes and 1 way to force a dropout, but first, I read some posts and tried ALL following settings one-at-a-time and restored them ALL because NONE of them helped: Turned off IPV6. Streamed to multiple speakers 'Computer' and 'AX' (restored to just AX). Turned off 'Ask to Join new (WiFi) Networks'. Turned off Bluetooth (can't live without Magic Trackpad, so glad that wasn't it). Here's my discoveries: Lo and behold, each time I click the Airport icon in the Menu (you know it shows you've got 4 bars from AX) when the status switches to 'Looking for Networks' for a second it CAUSES the AX audio to drop out for a couple seconds (it never did that before today.) iTunes still playing, streaming, AX laser still lit, but the 'PCM' light on stereo and the sound GOES OUT EVERY time I click the Airport icon in the menubar, just like the regular, annoying dropouts. So, to reduce traffic I quit Safari (3 tabs, no streaming, just Gmail, Google, and Netflix browsing). Lo and behold, the dropouts stopped altogether. No other Web apps going (not iTunes Store, Genius, Ping, nothing), so I launched Chrome to the same 3 tabs and the dropouts HAVE NOT RETURNED. That's right, not only did simply QUITTING SAFARI cure it, and Chrome doesn't contribute to it, but I can demonstrate it just by forcing my Airport to re-scan. Works for me, written using Chrome. The other reliable fix is to hardwire MacBook to the Switch. This is obviously not ideal, but Airplay audio doesn't drop out over Ethernet. Also, in all my tests, it made no difference whether iTunes did the streaming, or Airfoil did.

After upgrading to IOS 7.0.2 I can't see the radio button in the music app on my iPad

The radio button does not show anymore in my music app on my iPad after I upgraded to IOS 7.0.2 - it did show briefly the first time I started the app after upgrading but immediately disappeared and is now gone for good. Don't have the issue with my iPhone at all. There it still shows - I tried to restore my iPad and again, opening the music app I was able to see the radio button for 5 seconds and than it disappeared. Any suggestion ?

Following ultimately helped me : Make sure that you are logged in at the App Store App or iTunes App with your apple ID and password with a US account. Turn your iPad off and on and than you should see the Radio button again. It won't work if you are logged on with a foreign account. If you are not logged in at all, it worked, too.

Trying to understand the sound system

Here's my problem. My mic didn't work (neither the front mic nor the line-in in the rear), so after some research and trial and error I found that if I do
modprobe soundcore
my mic works on both the jacks
But here's where my confusion lies. This is the output of lsmod |grep snd before probing explicitly for soundcore
[inxs ~ ]$ lsmod |grep snd
snd_hda_codec_analog 78696 1
snd_hda_intel 22122 1
snd_hda_codec 77927 2 snd_hda_codec_analog,snd_hda_intel
snd_hwdep 6325 1 snd_hda_codec
snd_pcm_oss 38818 0
snd_pcm 73856 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 19416 1 snd_pcm
snd_page_alloc 7121 2 snd_hda_intel,snd_pcm
snd_mixer_oss 15275 2 snd_pcm_oss
snd 57786 8 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6146 2 snd
[inxs ~ ]$
So as you can see, soundcore's already loaded, so why do I have to explicitly load it again to get the mic to work?
Once I add soundcore to my MODULES array and reboot, the lsmod output is also the same as above.
So my question is -- what does the explicit loading of soundcore do, that is not done by auto-loading of that module?

Oh... since your topic is Trying to understand the sound system, that puts you (and me) inside the whole world's population... chuckle. But I thought I'd pass along a document written by probably "The" main ALSA developer that I totally stumbled across just 3 days ago.
Go here:
http://kernel.org/pub/linux/kernel/people/tiwai/docs/
and download the flavor of your choice of the "HD-Audio" document, or simply view it online. It documents the deepest dive into the current ALSA snd_hda_* layers and issues that I've found to date (but still leaves me wanting).
Why that document isn't plastered across the interwebs is beyond me. I only get 11 hits when I search for it... such are the secrets of the ALSA world I guess.
Last edited by pigiron (2011-08-26 18:26:48)

Trying to understand the code???

Hi,
I am trying to understand the following bit of code, currently the code puts each catalogue into a different row of the table but i want each catalogue to be put in the next column
(so the catalogues appear across the page on the actual web page). The following code is for the page in question but im not sure how much is relevant so i will paste it all and highlight the section i think is relevant:
<html>
<%-- DECLARATIONS --%>
<%@ page import="se.ibs.ns.cf.*, se.ibs.ccf.*, se.ibs.bap.*, se.ibs.bap.util.*, se.ibs.bap.web.*, java.util.*, se.ibs.ns.icat.*, se.ibs.bap.asw.cf.*, java.lang.*" %>
<% ItemCatalogueBean bean = (ItemCatalogueBean)SessionHelper.getSessionObject("ItemCatalogueBean",session);
   String resourcePath = bean.getResourcePath(null);
   String title = "Product catalogue";
   String languageCode = bean.getLanguageCode();
%>
<%@ include file="FuncHead.jsp" %>
<BODY class="IBSBody" onLoad="loaded = true;">
<form method="POST" action=<%= bean.getEncodedServlet("se.ibs.ns.icat.ItemCatalogueSearchServlet", response) %> name="basicForm">
<%@ include file="FuncSubmitScript.jsp" %>
<%@ include file="FuncPageBegin.jsp" %>
<div align="center">
<table border="0" width="895">
    <tr>
      <td align="left" width="502">
<div align="left">
<table border="0" width="500">
    <tr>
      <td class="IBSPageTitleText" align="left" valign="top" width="238">
          <%@ include file="FuncPageTitle.jsp" %>
          <%@ include file="FuncPageTitleImage.jsp" %>
                <br>
       On this page you can see the product catalogues. Click on one of the
       links to go to the next level. Alternatively you can click the <b>Search
       catalogue</b> button to find the products of interest.</td>
           <td width="248" valign="bottom">
            <div align="left"><%@ include file="FuncShoppingCart.jsp" %></div>
           </td>
    </tr>
</table>
</div></td></tr></table></div>
<input type="submit" value="Search catalogue" name="ACTION_NONE" onClick="submitButtonOnce(this); return false">
<hr>
<%-- REPEAT CATALOGUES --%>
<div align="left">
<table border="0" width="100%">
<% Vector catalogues = bean.getItemCatalogues();
        int cataloguesSize = catalogues.size();
           for (int i = 0; i < cataloguesSize; i++){
                  BAPItemCatalogue cat = (BAPItemCatalogue) catalogues.elementAt(i); %>
          <%-- LINK AND MARK AS NEW --%>
              <tr>
                     <td width="23%"><a class="IBSMenuLink" href="link" onClick="javascript:invokeLink('<%= bean.getEncodedServlet("se.ibs.ns.icat.ItemCatalogueCategoryServlet", response) %>?CODE=<%= ToolBox.encodeURLParameter(cat.getCode())%>'); return false">
                          <%= cat.getDescription(languageCode) %></a>
                     </td>
                     <td width="40%" align="right">
                          <% if (cat.isNew()) {%>
                                 <img border=0 src="<%= resourcePath %>new.gif">
                          <% } %>
                    </td>
              </tr>
          <%-- CATALOGUES IMAGE AND INTERNET INFORMATION (text, multimedia objects,downloads, links...) --%>
              <tr>
                     <td width="23%" valign="top" align="left">
                          <% if (bean.isAdvanced(cat) && bean.hasMultimediaImage(cat)) { %>
                               <a href="link" onClick="javascript:invokeLink('<%= bean.getEncodedServlet("se.ibs.ns.icat.ItemCatalogueCategoryServlet", response) %>?CODE=<%= ToolBox.encodeURLParameter(cat.getCode())%>'); return false">
                               <img border="0" src="<%= bean.getMultimediaImage(cat) %>"></a>
                    <% } else {%>
                               <img border="0" src="<%= resourcePath %>Catalog.gif">
                          <% } %>
                     </td>
                     <td class="IBSTextNormal" width="40%" valign="top">
                          <%= bean.getWebText(cat) %>
                     </td>
              </tr>
              <tr>
                     <td width="23%">
                     </td>
                     <td width="40%">
                     <% Vector mmLinks = bean.getMultimediaLinks(cat);
                  int mmLinksSize = mmLinks.size();
                          for (int ml=0; ml<mmLinksSize; ml++){
                               BAPCodeAndDescription mmLink = (BAPCodeAndDescription)mmLinks.elementAt(ml); %>
                               <a class="IBSLink" href="<%= mmLink.getCode() %>" target="_blank"><%= mmLink.getDescription() %></a><br>
                     <% } %>
               <% Vector webLinks = bean.getWebLinks(cat);
                    int webLinksSize = webLinks.size();
                    for (int wl=0; wl<webLinksSize; wl++){
                               BAPCodeAndDescription webLink = (BAPCodeAndDescription)webLinks.elementAt(wl); %>
                               <a class="IBSLink" href="<%= webLink.getCode() %>" target="_blank"><%= webLink.getDescription() %></a><br>
                    <% } %>
                     </td>
              </tr>
          <%}%>
</table>
</div>
<%@ include file="FuncPageLinks.jsp" %>
<%@ include file="FuncPageEnd.jsp" %>
</form>
</body>
</html>i hope someone could help me to understand this,
thank you for your help

You've probably already seen these, but here are a couple of links that may help.
http://help.adobe.com/en_US/FlashPlatform//reference/actionscript/3/operators.html#array_a ccess
http://www.adobe.com/livedocs/flash/9.0/ActionScriptLangRefV3/Array.html
What's basically happening is that the "for" loop goes through each item in the array. Don't be confused by the fact that two of the items in the array are Strings and one is an Integer - variable i being a String has nothing to do with the data type of the elements in the array.
The following code:
private function createLabels():void
     var myArray:Array = ['one', 'two', 3];
     for(var i:String in myArray)
          trace("i = " + i);
          trace(myArray[i]);
gives the following results:
i = 0
one
i = 1
two
i = 2
3
From that we can see that the "for" loop is assigning the index number of each array element, not the actual array element ('one', 'two', or 3) to the variable i. So calling myArray[i] is the same as calling myArray[0] the first time through the loop. This type of "for" loop is just a shorter way of doing the following, which produces exactly the same results:
private function createLabels():void
     var myArray:Array = ['one', 'two', 3];
     for(var i:int = 0; n < myArray.length; i++)
          trace("i = " + i);
          trace(myArray[i]);
Hope that helps.
Cheers!

Trying to understand the Music app... Genre question

Similar Messages

Maybe you are looking for