Trying to Upgrade to SCOM 2012

Hello,
I am running SCOM 2007 R2 CU7 on a Windows Server 2008 R2 SP1 server with SQL Server 2008 R2 SP2. It was a secondary MS that I promoted to an RMS. I ran all the requirements prior to the upgrade and I keep getting the error that I have to upgrade
to the latest CU. The OpsMgrSetupWizard.log file states that The MP Microsoft.SystemCenter.Library has been detected with a version of 6.1.7221.0. If I go to the Operations manager folder, and I open Microsoft.SystemCenter.Library.mp, it says that
it is version 6 . 1 . 7 2 2 1 . 8 1. In the Authoring pane, the System Center Core Library is listed as version 6 . 1 . 7 2 2 1 .0. Any ideas as to why the MP has not been updated?

It is not easy to trace afterwards. You could try the methods in the blog below.
http://scompro.wordpress.com/2011/11/21/opsmgr-scom-2007-r2-cu5-does-not-update-system-center-core-library-as-it-was-supposed-to-do/
Important Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Juke Chou
TechNet Community Support

Similar Messages

Problem upgrading from SCOM 2012 SP1 to R2 (near impossible to uninstall SCOM agent from Management Server)

I'm trying to upgrade our SCOM 2012 SP1 environment to R2, but I have a heck of a problem getting there.
We currently have an test installation with SCOM 2012 SP1 with Management Server and Console on a single 2012 Standard server. The database are located on a remote server. The R2 setup stopped mid way through the setup, because the SCOM 2012 SP1 agent is
installed. And I could NOT remove it my any normal means. I've tried "misexec.exe /x productcode", the setup, powershell uninstall and so on. Nothing works, because the management server installation is blocking the uninstall. The uninstall says
I have to remove the management installation first. And that's not gonna happen.
I had to follow this guide to finally getting through the setup: http://www.opsman.co.za/forcibly-removing-a-scom-agent-that-cannot-be-uninstalled-by-normal-means/
In addition to searching for the agent msi install key in registry, and deleting everything. After I did this, the setup is working, and the SCOM management server, console and DB are up to date. However, the Microsoft Monitoring Agent are STILL there in
Control Panel. And this can NOT be the most healthy way of getting through the setup.
I'm about to upgrade to R2 in our production environment with 3 management servers, and I would hate to go through this sketchy process there as well. Just for the record, I have no idea why the agents are installed on our management servers.
Any of you have tips as to how I can get rid of the agents more gracefully?

Hi
Thanks for the replay guys!
None of those links touch my problem I'm afraid. I have followed the Upgrade guides you pointed to, step by step. But the setup does not Complete. There's problems during the actual software Upgrade of the management servers (3'rd step in the Upgrade page).
I've dived into the Application logs and installation logs, and as far as I can tell, it stops because it has trouble upgrading while the server has the 2012 SP1 Agent installed. I do not remember the actual error text right now, but I can get it in a few
days.
Anyhow, the setup DID move on once I removed most of the registry information of the agent installation. So. that leaves me to the conclusion that the agent IS in fact stopping the setup. Either the agent are malfunctioning, or the setup do not expect the
agent to be present on the management servers. I suspect the latter to be the the most plausible. At least until Yan Li told me this was normal.
So, I'm not sure what to think. I'm pretty much forced to remove this agents, as this is the only thing allowing me to continue the setup. At least untill I'm told otherwise. But I hate to do it this way. It's so dirty. The registry is pretty much cleaned,
but there's still Application files present, and the agent is still in the Control panel and can be started. It's not something I would like to do in our prodution environment.

Upgrade from SCOM 2012 R2 directly to UR4

Is it possible to Upgrade from SCOM 2012 R2 RTM to Update rollup 4 ?
I alreday upgraded but I could not find new dashboard and widgets ?

It's a cumulative upgrade so you don't need to install all of the release sequential. Latest is enough.
Did you also import the management packs as mentioned in the guide?
https://support.microsoft.com/kb/2992020/en-us
Import the following management packs:
Microsoft.SystemCenter.TFSWISynchronization.mpb, which has the following dependency:
Microsoft.SystemCenter.AlertAttachment.mpb, which should be installed from the System Center Operations Manager 2012 R2 media.
Microsoft.SystemCenter.Visualization.Library.mpb
Microsoft.SystemCenter.Visualization.Component.Library.mpb
Microsoft.SystemCenter.Advisor.mpb
Microsoft.SystemCenter.Advisor.Internal.mpb
Microsoft.SystemCenter.2007.mp
Also don't forget to update the console!

Question on upgrading to SCOM 2012 R2 form SCOM 2012 SP1

Hello!
I planned upgrade to SCOM 2012 R2 form SCOM 2012 SP1.
Should I install any or last update rollup package to my SCOM 2012 SP1, before upgrading to SCOM 2012 R2 ?

It is highly recommend that you has install most updated CU before upgrade SCOM 2012 sp1 1 to SCOm 2012 R2 but it is not necessary. You should view NEPA PFE Team blog that demostrate how to upgrade SCOM 2012 SP1 with CU4 to SCOM 2012 R2.
http://blogs.technet.com/b/nepapfe/archive/2013/11/26/upgrading-scom-2012-sp1-to-scom-2012-r2.aspx
Roger

Upgrading from SCOM 2012 SP1 to SCOM 2012 R2 what CU do i install? CU5?

Hi,
I just upgraded from SCOM 2012 SP1 to SCOM 2012 R2. What CU version should I install? CU5?
Thanks
K

The most current CU version os SCOM 2012R2 is CU4
You can download it from
https://support.microsoft.com/kb/2906925?wa=wsignin1.0
For detail description of SCOM 2012 R2 CU4, you may refer to
http://support.microsoft.com/kb/2992020
and
http://syscentercldman.blogspot.hk/2014/12/update-of-scom-2012-r2-ur4.html
Roger

Error when trying to upgrade scsm dw 2012 sp1 to r2

Hello,
when I trying to install scsm 2012 r2 upgrade on my scsm dw server error appears.
does anyone faced and successfully resolved this problem?
regards,
Ilgar
Regards, Ilgar Khalilov.

This issue might happen if you have a space in the DW Management Group name.
Maybe this blog post from Anders Asp is helpful:
Strange error message when trying to upgrade SCSM 2012 Sp1 to SCSM 2012 R2
Andreas Baumgarten | H&D International Group

Upgrade to SCOM 2012 Agent - 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameters is incorrect)

I have seen this behavior on multiple servers. I receive this error when upgrading from a 2007 Agent to SCOM 2012.
Event ID: 10005
Product: System Center 2012 - Operations Manager Agent -- Error 25211.Failed to install performance counters.. Error Code: -2147024809 (The parameter is incorrect.).
Event ID: 1008
The Open Procedure for service "HealthService" in DLL "C:\Program Files\System Center Operations Manager 2007\HealthServicePerformance.dll" failed. Performance data for this service will not be available. The Status code returned is the
first DWORD in the attached data.
Any idea why I receive this error?
Thanks
Mike

Hi,
Please refer to this article:
SCOM 2012 – Unable to upgrade agent after upgrade from SCOM 2007
http://www.phits.nl/wordpress/2013/02/01/scom-2012-unable-to-update-agent-after-upgrade-from-scom-2007/
Alex Zhao
TechNet Community Support

Issue upgrading SCOM 2012 SP1 to SCOM 2012 R2

I have been having a really fun time trying to get my test SCOM 2012 SP1 environment upgraded to SCOM 2012 R2. I initially had an issue with the DB server not accepting connections to SMB which was causing the upgrade to fail stating database permission
issues (that was a fun one to troubleshoot). Once I figured out that problem I am now getting an error in the OpsMgrSetupWizard log that is stating the following:
[14:46:47]: Always:
:LaunchMsiSetup: Complete: 2 seconds
[14:46:47]: Error:
:LaunchMsiSetup: Failed, return code: 1612
[14:46:47]: Error:
:Error:Failed to uninstall previous MOM product on this machine, cannot proceed with upgrade
[14:46:47]: Error:
:Error:Failed to uninstall Operations Manager Agent on this machine. This is fatal error, we cannot proceed with upgrade
[14:46:50]: Error:
:LaunchMSI: MSI E:\Setup\AMD64\Server\OMServer.msi returned error 1603
[14:46:50]: Error:
:ProcessInstalls: Install Item Management Server failed to install. We did not launch the post process delegate.
In the application log I am getting the following error:
"Product: System Center Operations Manager 2012 Server -- The Operations Manager management server cannot be installed on a computer on which the Operations Manager agent, Operations Manager gateway, System Center Essentials, or System Center Service
Manager is already installed. These must be uninstalled to proceed."
I have verified that I don't have any of these installed and have even gone so far as to remove my Config man agent and System Center Endpoint Protection just in case it was getting confused with System Center Essentials.
I am at a loss as to what to try next. Any suggestions?

Hi,
Check if you have the following registry. If so, please back it up first, then delete for a test.
HKEY_CLASSES_ROOT\Installer\UpgradeCodes\C96403E8AD6025B4F9E1FE9C574E34AE
Also, please uninstall MOM product and Operations Manager Agent manually to check the result.
Upgrading System Center 2012 SP1 - Operations Manager to System Center 2012 R2
http://technet.microsoft.com/en-us/library/dn249707.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Upgrade to R2 from SCOM 2012 SP 1 UR 4 - Final configuration failed to install

I was upgrading our test SCOM 2012 SP1 UR 4 sever to R2 and ran into the following issue:
Setup cannot be completed… Final configuration failed to install.
Everything else upgraded fine.
There was no rollback performed…. The log states “Skipping rollback for install item Final Configuration as it was not successfully installed”
Looking in OpsManagerSetupWizard.log in the section for Final Configuration I see the following:
[16:00:43]:           Always: :!***** Installing: POSTINSTALL ***
[16:00:43]:           Info:      :SetProgressScreen: StartMinorStep.
[16:00:43]:           Warn:    :ApplyUpdates: Unable to load QFE file.
[16:00:43]:           Always: :Doing Preinstall task for POSTINSTALL
[16:00:43]:           Warn:    :CheckAndLoadUpdateFiles: Unable to load QFE file.
[16:00:43]:           Always: :Doing Install task for POSTINSTALL
[16:00:44]:           Debug: :DoInstallTask: Found Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall;PostInstallProcessor as type and method.
[16:00:44]:           Info:      :Type: Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall Method: PostInstallProcessor
[16:00:44]:           Info:      :SetProgressScreen: Init Exe Install progress.
[16:00:44]:           Info:      :AddUninstallChangeEntry: Cleaning out existing files at the ARP file cache location D:\Program Files\System Center 2012\Operations
Manager\Setup
[16:00:44]:           Error:     :InstallActionProcessor.DoInstallTask: method PostInstallProcessor threw exception. We will return installSuccessful = false.:
Threw Exception.Type: System.Reflection.TargetInvocationException, Exception Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
[16:00:44]:           Error:     :StackTrace:   at System.RuntimeMethodHandle.InvokeMethod(Object target, Object[] arguments, Signature sig, Boolean constructor)
   at System.Reflection.RuntimeMethodInfo.UnsafeInvokeInternal(Object obj, Object[] parameters, Object[] arguments)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallActionProcessor.DoInstallTask(InstallItemsInstallDataItem itemToInstall)
[16:00:44]:           Error:     :Inner Exception.Type: System.UnauthorizedAccessException, Exception Error Code: 0x80131604, Exception.Message: Access to the path 'EULA_EN_EVAL.RTF'
is denied.
[16:00:44]:           Error:     :InnerException.StackTrace:   at System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive, Boolean
throwOnTopLevelDirectoryNotFound)
   at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.ARPFileCache()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupHelpers.AddUninstallChangeEntry()
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.PostInstall.PostInstallProcessor(Func`3 setProgressScreen)
[16:00:44]:           Error:     :ProcessInstalls: Install Item Final Configuration failed to install. We did not launch the post process delegate.
[16:00:44]:           Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Final Configuration
[16:00:44]:           Info:      :SetProgressScreen: FinishMinorStep.
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :****Starting*RollBack*******************************************
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Info:      :SetProgressScreen: StartMinorStep.
[16:00:44]:           Always: :ProcessRollback: Skipping rollback for install item Final Configuration as it was not successfully installed.
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :****Ended*RollBack**********************************************
[16:00:44]:           Always: :****************************************************************
[16:00:44]:           Always: :Entering Page: FinishPage
The log states “Access to the path 'EULA_EN_EVAL.RTF' is denied.” I was able to find this file in D:\Program Files\System Center 2012\Operations Manager\SetupTemp\EN, but when viewing its contents I see it
was from the SP 1 upgrade as it starts off with “MICROSOFT EVALUATION SOFTWARE LICENSE TERMS MICROSOFT SYSTEM CENTER 2012 STANDARD SERVICE PACK 1.” Based on everything else referenced in the log file previously, it seems like it was trying to locate
this file in D:\Program Files\System Center 2012\Operations Manager\Setup. Also, I applied the product key after installing SP1 previously, so it was not running with an evaluation license.
Running Get-SCOMManagementGroup | ft skuforlicense, version, timeofexpiration –a
gives me:
SkuForLicense Version     TimeOfExpiration
       Retail 7.1.10226.0 12/31/9999 11:59:59 PM
The version (7.1.10226.0) is that of SCOM 2012 R2 (as I noted before, there was no rollback.) Everything seems to be functioning fine (Console, Web Console, Reporting Services.)
Is there a way to get it to re-run only the Final Configuration steps (which will probably fail again as the EULA file does not exist where it expects it)? I am not sure if there were supposed to be any further
configuration steps that did not get completed, so i dont know how stable SCOM is now. Should I re-run the R2 installer? Or is it OK as is? The only info online about a SCOM Install where the final configuration failed to install dealt with
an error upgrading the SCOM Console, which is not relevant to my situation. This is my test SCOM environment, running on a VM. I could revert to the pre-upgrade snapshot and see if another upgrade attempt completes successfully, but if that does
work I am concerned that something like this may happen in my prod environment, which is not running on a VM, so has no ability to revert to a snapshot.

Hi,
Please refer to the following links:
Do I need a specific Cumulative Update Release (UR) in order to upgrade to SCOM 2012 or 2012 SP1 or 2012 R2?
http://blogs.technet.com/b/kevinholman/archive/2014/01/20/do-i-need-a-specific-cumulative-update-release-ur-in-order-to-upgrade-to-scom-2012-or-2012-sp1-or-2012-r2.aspx
Upgrading Operations Manager from 2012 SP1 to 2012 R2 step by step
http://www.systemcentercentral.com/upgrading-operations-manager-from-2012-sp1-to-2012-r2-step-by-step-upgrading-to-2012-r2-series/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+systemcenterforum+%28System+Center+Central+Rollup%29
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM 2012 Upgrade

Can I upgrade a SCOM 2012 SP1 UR4 machine to SCOM 2012 R2 UR1?

Adding more info:
Upgrading SCOM 2012 SP1 to SCOM 2012 R2
http://blogs.technet.com/b/nepapfe/archive/2013/11/26/upgrading-scom-2012-sp1-to-scom-2012-r2.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Scom 2012 sp1 to Scom R2 upgrade?

Dear all,
We are running with scom 2012 sp1 , is it mandatory to upgrade to scom 2012 r2 ? Since we heard scom 2012 sp1 has some bugs.

Hi,
It is highly recommend upgrade SCOM 2012 SP1 to SCOM 2012 R2 but it is not necessary. You could view NEPA PFE Team blog that demostrate how to upgrade SCOM 2012 SP1 to SCOM 2012 R2.
http://blogs.technet.com/b/nepapfe/archive/2013/11/26/upgrading-scom-2012-sp1-to-scom-2012-r2.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

SCOM 2012 SP1 Upgrade

Hello,
I have a SCOM 2007 R2 CU7 server that I upgraded to SCOM 2012. I am running Windows Server 2008 R2 SP1 and SQL Server 2008 R2 SP2. I tried twice to upgrade it to SCOM 2012 SP1 and it failed both times. In the OpsMgrSetupWizard.log file,
I see this error:
: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Incorrect syntax near 'MERGE'. You may need to set the compatibility level of the current database to a higher value to enable this feature.
See help for the SET COMPATIBILITY_LEVEL option of ALTER DATABASE.
Incorrect syntax near the keyword 'AND'.
Incorrect syntax near the keyword 'THEN'.
[10:58:04]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning()
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
[10:58:04]: Error: :RunStandardScripts failed with the following exception: : Threw Exception.Type: System.Reflection.TargetInvocationException, Exception Error Code: 0x80131604, Exception.Message: Exception has been thrown by the target of an invocation.
[10:58:04]: Error: :StackTrace:   at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
   at System.RuntimeMethodHandle.InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeType typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Delegate.DynamicInvokeImpl(Object[] args)
   at Microsoft.EnterpriseManagement.SetupFramework.ActionEngine.Action.Run(String displayStringNamespace, ProgressData progressData, Func`2 progressDelegate)
   at Microsoft.EnterpriseManagement.SetupFramework.ActionEngine.InstallStep.Run(String displayStringNamespace, ProgressData progressData, Func`2 progressDelegate)
[10:58:04]: Error: :Inner Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131604, Exception.Message: Incorrect syntax near 'MERGE'. You may need to set the compatibility level of the current database to a higher value
to enable this feature. See help for the SET COMPATIBILITY_LEVEL option of ALTER DATABASE.
Incorrect syntax near the keyword 'AND'.
Incorrect syntax near the keyword 'THEN'.
After both failed upgrades, I had to re-install SCOM 2007. How can I get the upgrade to complete? The prerequisites have been installed.

So try to change the SQL database Compatibility Level to SQL 2008 (100):
1. Open SQL Server Management Studio
2. Connect to the SQL server hosting the Operations Manager Databases
3. Expand Databases, Right Click on OperationsManager and click properties
4. Click Options, Change the Compatibility level: drop down to SQL Server 2008 (100), Click OK
5. Right Click on OperationsManagerDW and click properties, Click Options
6. Change the Compatibility level: drop down to SQL Server 2008 (100), Click OK
Niki Han
TechNet Community Support

SCOM 2012 R2 Upgrade Plan Discussion

Dear Experts,
Currently I have a RMS and one MS Server with SCOM 2007 R2 in my Test Environment (Windows 2008 R2).
Now, The Upgradation plan is below and please correct me if I am wrong.
SCOM 2007 R2 CU4 --> SCOM 2012
SCOM 2012 --> SCOM 2012 SP1
SCOM 2012 SP1 --> SCOM 2012 R2.
So we need to purchase of three types of SCOM 2012 versions S/W or else we can simply download those versions from Microsoft ?
Please provide me the complete process of this Migration cycle.
Saravana Raja

Hi Saravana:
Upgrading to System Center 2012 – Operations Manager is supported from Operations Manager 2007 R2 CU4, or from the latest available CU. See
http://technet.microsoft.com/en-us/library/hh476934.aspx.
As for upgrading from SCOM 2012 to SCOM 2012 SP1 to SCOM 2012 R2, MVP Marnix Wolf is clear that you need to perform each upgrade step separately:
http://thoughtsonopsmgr.blogspot.com/2013/07/upgrade-paths-to-system-center-2012-r2.html. The "complete process" would consists of performing the upgrade for each version one after the other, again, just as you put in your plan.
You do not need to purchase any additional software, but you will need to download the 3 versions as you described from Microsoft volume license site or other media source.
John Joyner MVP-SC-CDM

Performance by system and utilization reports are blank after upgrading SCOM 2012 SP1 to SCOM 2012 R2

Hi Experts,
We are getting blank Performance reports after upgrading to SCOM 2012 R2. Can anyone provide fix for this issue?
All the reports are working fine except Performance by system and utilization report.
Thanks in advance.
Regards
Karthick Malayalan

Hi Karthick,
Here are two links for your reference regarding to the blank report issue:
SCOM 2012 performance by system report and perform by utilization
https://social.technet.microsoft.com/Forums/systemcenter/en-US/b1b13318-2de5-4940-82a2-a8ce5b832c11/scom-2012-performance-by-system-report-and-perform-by-utilization?forum=operationsmanagerreporting
Base OS MP Version 6.0.6989.0 Imported? And Now Some Reports Are Partially
Empty?
http://thoughtsonopsmgr.blogspot.com/2012/11/base-os-mp-version-6069890-imported-and.htmlRegards,
Yan Li
Regards, Yan Li

Upgrade from SCOM 2007 R2 to SCOM 2012 R2 on a single server

we are planning to Upgrade from SCOM 2007 R2 to SCOM 2012 R2 on a single server.We are planning to do in place upgrade.

If you looking for a guide, check : http://blogs.4ward.it/how-to-upgrade-to-scom-2012-from-scom-2007-inplace-upgrade/
MS documentation for the upgrade is located at: http://technet.microsoft.com/en-us/library/hh476934.aspx
thx
Pranav

Trying to Upgrade to SCOM 2012

Similar Messages

Maybe you are looking for