TS1292 Hey, im facing a problem while im using the purchesing , its showing me that: contact with apple support itunes???? Please help
Hey, im facing a problem while im using the purchesing , its showing me that: contact with apple support itunes???? Please help
Use the link below to contact iTunes support.
http://www.apple.com/emea/support/itunes/contact.html
Similar Messages
-
Hello. I have a problem. I live in Armenia, now I am in Guangzho (China) and i have lost my Iphone 4S. Tryed to find in icloud, no result. it seems the finder has switched off or deleted my apple ID. Please help me. Can I do anything with IMEI code?
IMEI number is no use.
If you can't track it using find my phone.
Then report the lost to the local authority and your phone carrier.
change your passwords. -
I am having problems with my outlook 2011. While i am able to check and SEND email on all my other devices ( Ipad, iphone, Macbook), I am unablesend any email with my iMac ( i can recieve email) . This problem started suddenly and the error message i get is error 5.7.8. I have read the threads on line and went into settings, even created a new profile, nothing helps...Please advice..is this something to do with my keychain Access?
As Outlook is not an Apple product, you will find more helpers familiar with Outlook here:
Office for Mac forums -
I cannot download the apps. It's showing that u cannot use the Singapore software, you must switch to Indian store please help me out on this problem.
Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
If you find that it is set to the correct region, log out of your iTunes Store account, restart your iPhone, and sign into your account again.
Regards.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question. -
I have not used my ipod in a long while. i turned it on and it states ipod is disabled connect to itunes
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
TS3694 how can i solve my problem while updateing my i phone its shows error 3194
when i update my any i phone. it shows error 3194. please sugest me how can i solved this error.
From the article that the question was posted from:
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service. -
Problem with apple support , help me plz !! don't remove my thread plzz
hello all first of all please accept my apologies for my bad english language .I'm an American who lived outside of America since childhood. i hope you understand me . i am one of the apple fans that many times i contact with apple support team for solving my itunes problems, some of supports were great But on other side there are many employee in the apple company that they just give us some PREPARED answers without thinking about what i ask them !
i want to report my problem here to get rid of those useless persons and ofcourse those weak answers in the apple company. before of explaining my problem , let me tell you a short thread:
some months ago i bought one microsoft XBOX live CODE to charge my LIVE account , i bought that from a retail store at France. Code was redeemed before i buy that , that was obvious that seller had decide to scam me with a used voucher ! and he did not accept my words and he just needed proof. so i go to microsoft.com on support section then i start talking with online chat support
please help me to solve my problem , please tell me that how i can report some one on apple?
<Edited By Host>hi bleach i explain whole the story in the post 1 but the forum moderator removed that and this time he EDIT my thread.
i bought 3 iTunes code and i want to know the date and time of redeeming, this issue happened to me manytimes in the past and each time apple support answered me with the time of redeeming of the code.
but some times some persons in apple support they don't help me and they don't give me date and time of redeeming ! and they just give me some prepaid and Irrelevant answers.
all i want to say is that many persons in apple are useless really, and we have report their weak support.
yes you are right we are all users but what we have to do when a bad person support us on the apple ?
yourself just send me a link for this matter :www.apple.com/support/contact
what i have to do on that link ?
where i have put my complaint ??
hey peoples , many support persons in apple have no any Creativity to solve our porblems . what we have to do againts of them ??
many times apple support employees tell us "I do understand how important it must be for you to know the details, but I do apologize as I won't be able to provide any more details regarding your concern."
is it giving the date and time of redeeming so hard? Why he/she can't give me more details regarding my concern BUT others can do ?? -
I am facing a problem while working in Muse... The issue is I cannot delete a page from my plan, when I am trying to delete it showing an error and the application shuts down. I am working on an emergency project which I got to submit it tomorrow I hope you will find a solution for the same.Help with using Adobe Muse CC
Thanks,
I have tried with a new site it's working perfectly.
See the screenshot of the error.
Thanks for your support Rohit -
Facing a Problem while downloading the data from ALV Grid to Excel Sheet
Hi Friends,
Iam facing a problem while downloading the data from ALV Grid to excel sheet. This is working fine in Development server , when comes to Quality and Production servers I have this trouble.
I have nearly 11 fields in ALV Grid and out of which one is PO number of length 10 , all the ten numbers are visible in the excel sheet if we download it from development server but when we download it from Quality or Production it is showing only 9 numbers.
Can any one help me out in this case.hi...
if this problems happens dont display the same internal as u finally got.
just create new internal table without calling any standard data elements and domains... but the new internal table s similar like ur final internal table and move all the values to new int table.
for eg.
ur final internal int table for disp,
data : begin of itab occur 0,
matnr like mara-matnr,
end of itab.
create new like this,
data : begin of itab occur 0,
matnr(12) type N,
end of itab. -
Facing some problem while configuring Workflow Manager 1.0.
Hi,
I am facing some problem while configuring Workflow Manager 1.0. in my farm.
Scenario is,
I have installed and configured workflow manager in my farm, it was working well with no issue. But one of team member played with AD and deleted Farm administrator's entry from AD by mistake. So suddenly workflows get affected and stopped working.
Then I added administrator entry in AD, uninstalled the Workflow Manager and installed it again. But now while configuring workflow manager I am facing some issues that "Failure to adding user in BUILTIN\Administrative group. Please add it manually"
And after sometime it shows another error message that, "Starting service Service Bus Massage broken failed: Timed out has expired, the operation has not been completed"
If I go for services then "Service bus Message broker" service is not running properly (Its status is just showing "Starting") and don't starts.
I have also added the user in BUILTIN\Administrator, IIS_IUSER, WSS_WPG group of the machine from computer manager - user and groups.
Also given permission to databases, and assign role of sysadmin and dbcreator to user
I also tried following steps
1) Stop all services associated to workflows
2) Uninstalled workflow manager
3) Deleted all databases associated with workflows
4) Installed workflow manager and tried to configure.
But showing same error.
If I use another SharePoint server farm to configure workflows, there I am not getting first error of adding user to BUILTIN\Administrator group. but second error remains same.
We having SQL server and Active directory at another machine and FARM at another machine, if I use local admin for configuration of the workflows (as local admin can start any services) but entry of local admin is not Active directory so can not assign SQL's
sysadmin, and dbcreator role to local admin.
I am attaching snapshot of error for better understanding.
Your help will be very precious to me.
Thanks,
Rajesh
Rajesh AgravatRajesh
Check to see what the service accounts are being used for these Workflow Manager 1.0 services:
Service Bus Message Broker
Service Bus Gateway
Workflow Manager Backend
All of these should be running and your workflow service account should be running all of these. If any are still configured under the old service account, they'll need to be updated. Next, check to see what service accounts have access to the
Workflow Manager 1.0 databases:
SbGatewayDatabase
SbManagement
SbMessageContainer
WFInstanceManagement
WFManagement
WFResourceManagement
The Workflow Manager service account should be mapped as the DBO for all of these. if any are still configured under the old service account, they'll need to be updated.
Given the complete loss of the original workflow service account, and the resultant impact on security configuration throughout the workflow farm, I would recommend performing a re-installation. Do it thus:
Launch Workflow Manager Configuration Wizard
Select the Leave Workflow Manager Farm
Stop all workflow services (see above list)
Repeat steps 1-3 for each instance of Workflow Manager 1.0 Server installed.
Delete all Workflow Manager databases (see above list).
reboot.
Start new installation. -
[04/Dec/2001 10:54:00:2] error: EBFP-marshal_internal: internal exception caught in kcp skeleton, ex
ception = java.lang.NullPointerException
[04/Dec/2001 10:54:00:2] error: Exception Stack Trace:
java.lang.NullPointerException
at java.util.Hashtable.get(Hashtable.java:321)
at com.netscape.server.ejb.SQLPersistenceManager.<init>(Unknown Source)
at com.netscape.server.ejb.SQLPersistenceManagerFactory.newInstance(Unknown Source)
at com.netscape.server.ejb.EntityDelegateManagerImpl.getPersistenceManager(Unknown Source)
at com.netscape.server.ejb.EntityDelegateManagerImpl.doPersistentFind(Unknown Source)
at com.netscape.server.ejb.EntityDelegateManagerImpl.find(Unknown Source)
at com.kivasoft.eb.EBHomeBase.findSingleByParms(Unknown Source)
at samples.test.ejb.Entity.ejb_home_samples_test_ejb_Entity_TestEntityBean.findByPrimaryKey(
ejb_home_samples_test_ejb_Entity_TestEntityBean.java:126)
at samples.test.ejb.Entity.ejb_kcp_skel_TestEntityHome.findByPrimaryKey__samples_test_ejb_En
tity_TestEntity__int(ejb_kcp_skel_TestEntityHome.java:266)
at com.kivasoft.ebfp.FPRequest.invokenative(Native Method)
at com.kivasoft.ebfp.FPRequest.invoke(Unknown Source)
at samples.test.ejb.Entity.ejb_kcp_stub_TestEntityHome.findByPrimaryKey(ejb_kcp_stub_TestEnt
ityHome.java:338)
at samples.test.ejb.Entity.ejb_stub_TestEntityHome.findByPrimaryKey(ejb_stub_TestEntityHome.
java:85)
at samples.test.ejb.TestEJB.getGreeting(TestEJB.java:51)Hi,
I think you are trying to test the Hello world EJB example shipped with the product. As a first
step I would recomend you to go through every line of the document on deploying this application,
since, I too have experienced many errors while trying to deploy the sample applications, but on
following the documentation, I subsequently overcame all the errors and have been working with the
applications. So please follow the steps in documentation and let me know, if you still encounter any
issues.
Regards
Raj
Sandhya S wrote:
I am facing a problem while deploying an Entity bean in iPlanet(sp3).I
have attached the exception thrown.Why has this exception occured?
[04/Dec/2001 10:54:00:2] error: EBFP-marshal_internal: internal
exception caught in kcp skeleton, ex
ception = java.lang.NullPointerException
[04/Dec/2001 10:54:00:2] error: Exception Stack Trace:
java.lang.NullPointerException
at java.util.Hashtable.get(Hashtable.java:321)
at
com.netscape.server.ejb.SQLPersistenceManager.<init>(Unknown Source)
at
com.netscape.server.ejb.SQLPersistenceManagerFactory.newInstance(Unknown
Source)
at
com.netscape.server.ejb.EntityDelegateManagerImpl.getPersistenceManager(Unknown
Source)
at
com.netscape.server.ejb.EntityDelegateManagerImpl.doPersistentFind(Unknown
Source)
at
com.netscape.server.ejb.EntityDelegateManagerImpl.find(Unknown Source)
at com.kivasoft.eb.EBHomeBase.findSingleByParms(Unknown
Source)
at
samples.test.ejb.Entity.ejb_home_samples_test_ejb_Entity_TestEntityBean.findByPrimaryKey(
ejb_home_samples_test_ejb_Entity_TestEntityBean.java:126)
at
samples.test.ejb.Entity.ejb_kcp_skel_TestEntityHome.findByPrimaryKey__samples_test_ejb_En
tity_TestEntity__int(ejb_kcp_skel_TestEntityHome.java:266)
at com.kivasoft.ebfp.FPRequest.invokenative(Native Method)
at com.kivasoft.ebfp.FPRequest.invoke(Unknown Source)
at
samples.test.ejb.Entity.ejb_kcp_stub_TestEntityHome.findByPrimaryKey(ejb_kcp_stub_TestEnt
ityHome.java:338)
at
samples.test.ejb.Entity.ejb_stub_TestEntityHome.findByPrimaryKey(ejb_stub_TestEntityHome.
java:85)
at samples.test.ejb.TestEJB.getGreeting(TestEJB.java:51)
Try our New Web Based Forum at http://softwareforum.sun.com
Includes Access to our Product Knowledge Base! -
ages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?
Who knows what "ages" means to you, or what speed Internet connection you have, or what else is happening on your computer or network.
Pages/iWork are not small so it can take a while. Sometimes heavy demand at the Apple end can slow their server as well.
Peter -
Facing a problem while setting MAC 6.1. My version is 5.1. The activation does not complete.
Hacked or jailbroken iPhone will have this problem.
BTW, it's IOS 6.0.1 not MAC. -
Facing a problem while doing DML Operations in Discoverer (Urgent!!)
Hi,
I am facing a problem in one of the discoverer report i am working on. I would appreciate if you could help me to to find a solution for this -
I am triggering a custom package from the Discoverer. This package is inserting the data in a custom table. As we can not directly put the DML statements in the discoverer 's package so i have defined that package as the Pragma Autonomous. The custom table that is being populated is a regular table (i.e not a Global temporary table). In the custom folder in Administrator i am just selecting the data from that custom table.
Problem- When i run the report from discoverer, the data is getting inserted into the custom table, that means the package is working properly but still the report does not show any data. May be the query being executed even before the data is inserted into the table. Can you please suggest what is that i am missing in this solution?
Few facts of the report-
1. I am using only one worksheet.
2. The package is inserting the data in the custom table so i don't see any problem with the package and triggering it.
Thanks for your help.
-AnshulHi Michael,
This is not really an update. The functionality of the report is simple - Based on the parameters selected in the report, the package will get the data from queries and insert into the table. now the data in the table can be different for different users based on the parameters. what my concern was,
Consider a case of 2 users using this report almost at the same time.
We are not using the temporary table so we will have to truncate the table every time the report is ran, before inserting the new data in it.
Now suppose user -A runs the report and during it processing the 2nd user runs it with some different parameters. Then the 1st user's data will be deleted from the table.
does it sound right?
I was trying to achieve this functionality by using following functionality but here also i am facing a problem -
Now i am not inserting the data in the table but i have created a view that does the same thing as it was done by package in the previous case. and in order to pass the parameters in the view i am using set_context. I have created a package that is triggered by discoverer report and in that package i am setting the context. now i am facing the following problems -
a. Does the Set_context set the context globally?
b. Do i need to clear the context at the completion of report?
c. If the answer of the question - b is yes then where can i place that clear_context in the discoverer?
Thank you so much for your help.
thanks
-Anshul -
hey I have a problem. I want to change my rescue email address as somehow apple has the wrong one but I don't know my security questions - but you need one to change the other. Any help?
You can get your Security Questions reset by contacting iTunes Support at either of the two links below. Select the best options for your issue, or provide specific information. Let them know you are contacting them concerning Forgotten Security Questions. They will get back to you via your primary email address, usually within 24 hours. Once your Security Questions have been reset, you will be able to go in and reset your Rescue email address on your account:
http://www.apple.com/support/itunes/ww/
or by email:
http://www.apple.com/emea/support/itunes/contact.html
Cheers,
GB
Maybe you are looking for
-
Somehow 1500 web pages were downloaded into my iphone app! That's when the trouble began Now, I keep gettig error message"not enough room on your start up disc. "So I deleted most of theml, but when I compress/delete files, it doesn't help. Now i'm
-
ITunes Match no longer working: error -9810
Hi, I've been using iTunes Match for several months on my 2.4Ghz Intel Core 2 Duo Macbook Pro running OS X Lion 10.7.4. It's taken ages to upload my music (in stages) to the iCloud, but now my library of just over 25,000 tracks is nearly all in the c
-
Problem in N-STEP Approval BADI
Hi , I'am new to Workflows,I need your guidance in finishing the Item_level Approval BADI. I'am working on N-Step Approval Badi(Item Level Implementation) I have pasted the code here.There will be Multiple levels(Max 15 Levels) of Approvals. When a n
-
HT4993 does the Iphone 4s have or support active x
does anyone know if the Iphone 4S has active X or support active X for online security camera viewing
-
How to not getting record in table after refreshing my page?
Hi, I am using jdev 11.1.1.2.3 My problem is,.. i am performing deleting operation my table for deleting record in that time it is deleted, But in my problem is after refreshing the page record is coming back. I am performing delete operation using b