TS1338 My time machine is failing to back up my Mac using my external Seagate drive.

It will go through its motions, but in the end, it will say that it failed to back up. It has done it successfully in the past, but lately it has failed to complete a full back up. My 300GB Seagate drive still has plenty of space on it since I’ve dedicated it to do only that function. I have another 1TB Western Digital Book drive connected to my Mac Mini to perform the many other miscellaneous storage functions, but the Seagate is only for back ups.
If anyone can give me some advice on how to get my Seagate to do the necessary back ups, I’d sure appreciate it.

Please visit Pondini's Time Machine FAQ for help with all things Time Machine.
In the future when you report such a problem be sure to report any error messages received.

Similar Messages

  • I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?

    I just backed up my mac to an external hard drive using Time Machine. What would happen if I turn Time Machine off and then plug the external hard drive back into my computer?
    What I am ultimately wanting to do is make more room on my computer by backing up all of my files onto the external hard drive and then deleting them off of my computer. However, neededing to be able to retrieve them from the external hard drive later down the road.
    From what I have read and am trying to understand, is that I probably shouldn't have used time machine. I need to use the external hard drive like a basic flash drive where I can put things on and get things off without having it automatically update through time machine everytime I connect it to my computer.
    Not tech savvy at all and barely understand basics. I need very simple and easy to understand explanations.

    sydababy wrote:
    and then deleting them off of my computer.
    BIG BIG MISTAKE ..... youre making a linchpin deathtrap for your data trying to shove everything on a single fragile HD.
    Dont suffer the tragedy other people make, buy another or 2 more HD, theyre cheap as dust.
    The number of people who have experienced terror by having a single external HD backup is enormous.  One failure that WILL HAPPEN, and kaput,......all gone!
    Dont do it, its all about redundancy, redundancy, redundancy.
    follow here:
    Methodology to protect your data. Backups vs. Archives. Long-term data protection
    Deleting them off your computer is fine....having only ONE copy is extremely BAD.
    The Tragedy that will be, the tragedy that never should be
    Always presume correctly that your data is priceless and takes a very long time to create and often is irreplaceable. Always presume accurately that hard drives are extremely cheap, and you have no excuse not to have multiple redundant copies of your data copied on hard drives and squirreled away several places, lockboxes, safes, fireboxes, offsite and otherwise.
    Hard drives aren't prone to failure…hard drives are guaranteed to fail (the very same is true of SSD). Hard drives dont die when aged, hard drives die at any age, and peak in death when young and slowly increase in risk as they age.
    Never practice at any time for any reason the false premise and unreal sense of security in thinking your data is safe on any single external hard drive. This is never the case and has proven to be the single most common horrible tragedy of data loss that exists.
    Many 100s of millions of hours of lost work and data are lost each year due to this single common false security. This is an unnatural disaster that can avoid by making all data redundant and then redundant again. If you let a $60 additional redundant hard drive and 3 hours of copying stand between you and years of work, then you've made a fundamental mistake countless 1000s of people each year have come to regret.

  • After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive??

    After clean install of Snow Leopard, Time Machine did not restore all files.  When I try to restore these files I get "Not enough disk space" error.  What do I need to do to get these important files back onto my Mac from my external hard drive?? 

    Janet.b wrote:
    About 3 years old...pretty dated now I guess.  Am thinking I may just need to have it upgraded by a Mac tech.
    For what the Apple Store's charge you can buy almost buy a new computer.
    Just for giggles I brought my old laptop in for a drive upgrade and asked, they wanted $600 for a drive that only cost $120 at the time and it was a slow 5,400 RPM drive. The new Mac's of a similar make were going for $1000.
    I did the drive replacement myself, got a faster drive of better quality for $300 instead.
    Then another time I asked for a RAM upgrade from 4GB to 8GB, they wanted to charge $400 + $35 for the labor.
    The same RAM is on Crucial.com for $90 and all I need is a 00 micro phillips screwdriver.
    So you see what's going on here.
    I think what you should do, if your out of warranty/AppleCare, is to call up the local PC tech guy who also does Mac's and have them fix you right up.
    They can offer more personalized care which you need. Clone your old drive to the new and everything.
    With Apple they are overworked at the Genius Bar and just place roadblocks so you buy a new machine instead.
    For instance, all new iMac's now have proprietary drive software installed on the hard drives for heat monitoring. So now the only choice a user has is to bring their iMac into a Apple Store for a very expensive drive upgrade, which a person then decides the money is better spent buying a new machine.

  • I cannot get time machine (with airport) to back up my mac. It worked previously but not now. It is working on my macbook. the message i get is "Time Machine couldn't back up to '(airport network name)'"

    I cannot get time machine (with airport) to back up my mac. It worked previously but not now. It is working on my macbook. the message i get is "Time Machine couldn't back up to '(airport network name)'" Any help is appreciated.

    OS is important.. What OS is on Mac and what is on the working macbook?
    Was the Airport setup from the Macbook? That might be why it works from there..
    Does the AE show up in Mac airport utility?
    Can you mount the disk in finder and copy files to it/from it??
    Did you try a TM reset after mounting in Finder.. so you know it is available?
    What about a network reboot.. does it work post a restart for a few minutes/hours/days???

  • Can i back up 2 macs on one external hard drive?

    can i back up 2 macs on one external hard drive?

    If the external drive is large enough, yes.
    Recent versions of Time Machine will do this across a properly set up and Shared network connection or to a drive on a Server. But you may be unhappy with the amount of Wireless traffic generated to perform the backups, especially the initial full backup.
    Utilities like Carbon Copy Cloner will do this ONLY when performing a file-by-file backup. A "Disk Image" backup reproduces the Source disk, including blank space, and fills the entire Destination drive with the Source Disk image.

  • Use external drive for both Time Machine and storage for Back to My Mac

    Hi all,
    I have been "a Mac" now for over a year and just keep finding cool new things that make me happy I switched. The latest thing is Back to My Mac offered with my Mobile Me account. With a rather convoluted mix of PC/Mac/iOS devices to manage - best $99 I ever spent btw...
    I also have a 1TB Time Capsule that I have been using with Time Machine to back up all four of my Mac computers at home. Needless to say, the 1TB is really struggling to handle the amount of data being backed up and certainly leaves no room for anything else.
    What I wanted to do was to attach a larger external hard drive via a powered hub to the USB port on the Time Capsule and use it for Time Machine backups while using the internal 1TB drive with Back to My Mac so that I can have remote access to all my data from anywhere without having to leave my computer running at home all the time in order for my laptop to "see" it when I'm away. And, yes, the amount of that data far exceeds what any level of Mobile Me subscription can offer! I should also mention that the hard drive is the only USB device connected through the hub to the Time Capsule at the moment. There are no other devices that might be "getting in the way".
    I'm thinking maybe all this is asking too much without the addition of a dedicated file server (Mac Mini, perhaps - not a purchase my budget wants to make).
    I understand that the Time Capsule doesn't support partitions, so I bought a Western Digital 2TB Elements drive, connected it to my Macbook Pro and used Disk Utility to reformat the drive from the incompatible NTFS it shipped in to a single, Mac OS Extended (Journaled) partition. I then made two folders on the drive, one for Time Machine backups and one for Back to My Mac remote storage/access. Great.
    However, when I connected the 2TB drive to my Time Capsule I could not see it at all. Time Capsule was reporting problems in the way of a disk error. From within my Airport Utility, I could see the trouble was the external drive. The utility suggested connecting the drive to a Mac and using it's Disk Utility to troubleshoot.
    I followed through, checking the disk, etc. and ended up reformatted the drive on my Macbook Pro yet again with the same specifications as before but without the folders and reconnected it to the Time Capsule. Same deal. But now, I can't even remotely connect to the Time Capsule at all. I can see the Time Capsule in the shared area of my Macbook's Finder but can not connect. The connection tries and fails even before it gets to asking me for username and password credentials.
    Long story short, first of all, I suppose I would like to know if I'm asking for the impossible?
    Second, if what I want to do *is* possible, what steps do I need to take to make it so?
    Thanks in advance for any advice or suggestions you might have.

    Well, I have now reformatted/partitioned my poor WD Elements 2TB drive about a dozen times as well as restarted my 1TB Time Capsule so many times it's no wonder it's as confused as I am! <G>
    Last night, at your suggestion, William, and in respect for your continued support, I tried creating two 1TB Mac OS Extended (Journaled) partitions on the WD external USB drive, both with GUID partition tables. Both volumes mounted to my laptop's desktop flawlessly and without issue.
    Once the external drive was connected to the Time Capsule, however, it was a crap shoot as to whether or not the drive was recognized at all, reporting a problem with the disk, or, even at one point, mounting one of the two volumes but not both. <sigh>
    I read somewhere on the Internet that you need to restart the Time Capsule for volumes on an external USB drive to be recognized.
    So I tried that. I connected the freshly partitioned/formatted disk to the Time Capsule and restarted it. This succeed in removing the issue of reporting a nameless drive with a capacity of 0MB. It then reported the drive with its correct name but would not recognize whatever volumes in whatever partitions that particular crack at it contained with the exception of the once, as I mentioned above, when only one of two volumes mounted correctly and was listed with the right name and capacity on the Time Capusule's Setup's Disk tab.
    At this point I have given up on my goal to use the external drive with Time Machine to back up my Macs or to hope I will ever be able to see its contents remotely via Back to My Mac. All I would like to do now is simply find a reason why I can't get it successfully connected and playing nice with my Time Capsule in the first place!
    Any further suggestions or advice as to what steps I might take next would be greatly appreciated.
    Thank you all.

  • Operating Time Machine over a remote Back to My Mac connection is a challenge -- can I do restores in Terminal?

    When operating Time Machine remotely via Back to My Mac (and by remotely, I mean from Illinois to Ohio ), seeing your remote mouse cursor is largely a no-go, even in Lion. It simply does not get displayed, with very minor, flickering exceptions.  Certainly it becomes impossible to operate the Time Machine's Finder window in any mouse-clicking way.  I can barely operate the CANCEL or RESTORE buttons, and that's if I help myself by mousing over from outside the Screen Sharing Window, and kind of estimating if I am over the button area.  Similarly, I can get the mouse to give me some approximate date in the backups progression.  But the way to select a file, I found, is through arrow-keys.  I can get to the right directory before starting the Time Machine, and I can navigate to the correct file with much delay using the arrow-keys.  In short, it's a major freaking pain, because of all the lag and invisible mouse. 
    But I was able to do what I needed, given enough pain and perseverance.
    Question:  Given the impoverished visuals for mouse operations, is there a way to do this on the command line, not through the moving galaxy syntactic sugar that just gets in the way?  Can I run the whole restore operation in Terminal?  Of course, still via Back to My Mac, because I don't know how to get to the remote iMac in any other way remotely, given that it sits behind a cable modem and a Time Capsule router with NAT.  And I don't want to set up port forwarding, if I don't have to.
    Thanks for reading, and I'll take your considered expert advice.
    -- Marek

    Well, I have now reformatted/partitioned my poor WD Elements 2TB drive about a dozen times as well as restarted my 1TB Time Capsule so many times it's no wonder it's as confused as I am! <G>
    Last night, at your suggestion, William, and in respect for your continued support, I tried creating two 1TB Mac OS Extended (Journaled) partitions on the WD external USB drive, both with GUID partition tables. Both volumes mounted to my laptop's desktop flawlessly and without issue.
    Once the external drive was connected to the Time Capsule, however, it was a crap shoot as to whether or not the drive was recognized at all, reporting a problem with the disk, or, even at one point, mounting one of the two volumes but not both. <sigh>
    I read somewhere on the Internet that you need to restart the Time Capsule for volumes on an external USB drive to be recognized.
    So I tried that. I connected the freshly partitioned/formatted disk to the Time Capsule and restarted it. This succeed in removing the issue of reporting a nameless drive with a capacity of 0MB. It then reported the drive with its correct name but would not recognize whatever volumes in whatever partitions that particular crack at it contained with the exception of the once, as I mentioned above, when only one of two volumes mounted correctly and was listed with the right name and capacity on the Time Capusule's Setup's Disk tab.
    At this point I have given up on my goal to use the external drive with Time Machine to back up my Macs or to hope I will ever be able to see its contents remotely via Back to My Mac. All I would like to do now is simply find a reason why I can't get it successfully connected and playing nice with my Time Capsule in the first place!
    Any further suggestions or advice as to what steps I might take next would be greatly appreciated.
    Thank you all.

  • Time Machine indicates it is backing up twice as much data as my drive hold

    I am running a MacBook with a 160 gb hard drive. Approximately 90 gb of the drive is in use according to Macintosh HD Info. When I go to use Time Machine to do a backup, it indicates that it is going to back up abut 320 gb. Can anyone explain why?
    If I exclude my user directory from the backup, it goes down to the 90 gb that Info says is actually on the drive, but then I am not sure I am backing up all of my data. Can anyone explain to me what is going on and what I have to do to be sure that I am backing up all of my data?
    Thank you.

    Adrian J Gordon wrote:
    I am running a MacBook with a 160 gb hard drive. Approximately 90 gb of the drive is in use according to Macintosh HD Info. When I go to use Time Machine to do a backup, it indicates that it is going to back up abut 320 gb. Can anyone explain why?
    If I exclude my user directory from the backup, it goes down to the 90 gb that Info says is actually on the drive, but then I am not sure I am backing up all of my data. Can anyone explain to me what is going on and what I have to do to be sure that I am backing up all of my data?
    Thank you.
    Hi, and welcome to the forums.
    I assume you're talking about your very first TM backup? If so, not to worry.
    For some reason that nobody seems able to explain, TM's estimates of how much it's going to back up are always high, sometimes extraordinarily high.
    But it will back up the right things, and take up the right amount of space.
    For example, my last "incremental" backup (of practically nothing I changed), sent the following messages:
    +Starting standard backup+
    +Backing up to: /Volumes/TmBackups/Backups.backupdb+
    +No pre-backup thinning needed: 129.3 MB requested (including padding), 175.85 GB available+
    +Copied 371 files (686 KB) from volume Macintosh HD.+
    +No pre-backup thinning needed: 128.5 MB requested (including padding), 175.85 GB available+
    +Copied 280 files (0 bytes) from volume Macintosh HD.+
    +Starting post-backup thinning+
    +Deleted backup /Volumes/TmBackups/Backups.backupdb/JPs.G5.iMac/2009-01-18-214518: 175.85 GB now available+
    +Post-back up thinning complete: 1 expired backups removed+
    +Backup completed successfully.+
    Notice it "requested" 129.3 mb, but ended up copying a grand total of 686 kb? Makes no sense, but causes no harm, either.
    So by all means, remove your home folder from the exclusion list, let TM run (if the previous run completed ok, you don't have to erase it and start over), and then use, say, the finder > get info on your TM drive/partition to see how much is actually there.
    By the way, the messages above can be found via the Console app (in Applications/Utilities) in your system.log, or via the +Time Machine Buddy+ widget.

  • Can I use Apple Time Capsule both as a back up as well as an external hard drive simultaneously ?

    My new IMAC has 500 GB SSD. I want to create a back up for it in a 2 or 3TB Time capsule. Is it possible to have data other than my backup data in the time capsule?  And can I access it like an external hard drive?
    Thanks
    cpsharma

    1. If you're using Time Machine, you should allow it at least 1TB of space, but see #2.
    2. Yes, but it isn't possible to partition a Time Capsule in the normal fashion, and the Time Machine backup will eventually take up all the free space on the volume containing it. If desired, create a disk image on it.
    (121368)

  • Time machine on Lion crashes the whole system when used with external HD

    Hi all,
    Anybody got the same problem? I did a Time Machine backup just before I did the upgrade to Lion (using an external USB HDD) after the upgrade (that went well in my opinion) when I ask TM to do another backup it stays on "Preparing" indefenately and ultimately crashes the whole system ( reset with ctrl+cmd+power button) is required otherwhise the system stays non reactive.
    Regards,
    Iwan

    Start by verifying your internal HD, and repair your backups, per #6 in Using Disk Utility.
    If that doesn't help, see #D6 in Time Machine - Troubleshooting for a possible way to cancel the backup.  If that works, use the widget in #A1 there to display the backup messages from your logs.  Locate the backup in question, then copy and post all the messages here.

  • Upgrading from 10.5.8 to Snow Leopard 10.6.3 - I've backed up my mac with timemachine / external hard drive.  Am I all set to go?  Bit nervous!

    Hello kind support people - I'm not hugely technical so would appreciate any advice, I'm very worried about my i-photos and loosing them.  All my important documents are already on google drive so that's ok if anything has gone wrong.   Does all the information stay on my mac (such as photos and mail etc) when I upgrade?  Am I likely to experience any difficulties or should I be doing anything else?   Yesterday I used time machine for the first time, I have an external hard drive with back-ups taking place all the time (completed yesterday over a couple of hours).   Can I just eject the hardrive now and put my upgrade disc in? 
    Thanks in advance

    1. Yes, unless a problem occurs.
    2. No, you’re not.
    3. Yes.
    (111564)

  • How do I back-up an iMac with an external G-Drive?

    How do I back-up an iMac using an external G-Drive?

    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    SuperDuper!
    Synk Pro
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.

  • Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem."  Tried suggestions I've seen on the forum.

    Time Machine spends hours partially backing up and then fails with "Time Machine couldn't complete the backup due to a network problem."  I've tried various suggestions I've seen on the forum but nothing has worked.  TIme Machine worked fine for the last two years and just suddenly started having this problem every time.  The only thing that was a little different is that the computer was off for a week while on vacation and then I added a large amount (20 GB) of photos. Now the requested backup size is 82GB, which is large, and process proceeds very slowly for 2-3 hours before failing with the message mentioned.  I have more than enough available backup storage space for it.  Before failing, Time Machine has backed up no more than 12GB or so of the backup.  It fails during different files each time.
    I've turned off the computer sleep feature, and I've checked that the NAS is set to never automatically power down. I normally backup over Wi-Fi, but I've also tried connecting to Ethernet and it still has the same problem.  It's odd because I also have a MacBook Pro that is still backing up fine to the same NAS using the MacBook's Time Machine. 
    I am using an iMac with OS X 10.6.8 and an Iomega StorCenter ix2-200 NAS.
    I have system logs that I can share if helpful.  The logged messages vary a bit from run to run, but here are some messages that I've been seeing:
    I always get this message near the beginning of the backup:
    Event store UUIDs don't match for volume: Macintosh HD
    I've gotten this messsage a number of times:
    Bulk setting Spotlight attributes failed.
    One Day
    Stopping backupd to allow ejection of backup destination disk!
    Another day
    1/7/12 10:44:20 AM
    mDNSResponder[18]
    PenaltyTimeForServer: PenaltyTime negative -112916, (server penaltyTime -1132397006, timenow -1132284090) resetting the penalty
    1/7/12 10:46:37 AM
    kernel
    ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x1106be94
    1/7/12 10:46:37 AM
    kernel
    AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
    Another Day
    1/6/12 8:03:22 AM
    Google Chrome[164]
    Cannot find function pointer CMPluginInFactory for factory 3487BB5A-3E66-11D5-A64E-003065B300BC in CFBundle/CFPlugIn 0x16f99e20 </Users/smarmer/Library/Contextual Menu Items/Google Notifier Quick Add CM Plugin.plugin> (not loaded)
    1/6/12 8:04:02 AM
    com.apple.backupd[193]
    Copied 7.5 GB of 67.0 GB, 8866 of 8866 items
    1/6/12 8:06:58 AM
    /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer[1013]
    No valid tickets, timing out
    1/6/12 8:29:44 AM
    mDNSResponder[19]
    PenaltyTimeForServer: PenaltyTime negative -148702, (server penaltyTime 2056822773, timenow 2056971475) resetting the penalty
    1/6/12 8:59:22 AM
    kernel
    ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa5ac380
    1/6/12 8:59:22 AM
    kernel
    AFP_VFS afpfs_DoReconnect started /Volumes/TimeMachine prevTrigger 0 currTrigger 1
    1/6/12 8:59:22 AM
    kernel
    AFP_VFS afpfs_DoReconnect:  doing reconnect on /Volumes/TimeMachine
    1/6/12 8:59:22 AM
    kernel
    AFP_VFS afpfs_DoReconnect:  soft mounted and hidden volume so do not notify KEA for /Volumes/TimeMachine
    1/6/12 8:59:22 AM
    kernel
    AFP_VFS afpfs_DoReconnect:  Max reconnect time: 30 secs, Connect timeout: 15 secs for /Volumes/TimeMachine
    1/6/12 8:59:22 AM
    kernel
    AFP_VFS afpfs_DoReconnect:  connect to the server /Volumes/TimeMachine
    1/6/12 8:59:22 AM
    kernel
    ASP_TCP asp_SetTCPQoS:  sock_settclassopt got error 57
    Another day
    1/5/12 3:48:55 PM
    mdworker[2128]
    CFPropertyListCreateFromXMLData(): Old-style plist parser: missing semicolon in dictionary.
    1/5/12 4:24:54 PM
    mDNSResponder[19]
    PenaltyTimeForServer: PenaltyTime negative -42698, (server penaltyTime 1148718961, timenow 1148761659) resetting the penalty
    1/5/12 4:29:58 PM
    com.apple.backupd[2074]
    Copied 586.4 MB of 67.0 GB, 9891 of 9891 items
    1/5/12 4:39:00 PM
    kernel
    ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0xa1c0380

    bokon0n wrote:
    1/11/12 8:53:30 AM
    com.apple.backupd[1169]
    Warning: Destination /Volumes/TimeMachine does not support TM Lock Stealing
    1/11/12 8:53:30 AM
    com.apple.backupd[1169]
    Warning: Destination /Volumes/TimeMachine does not support Server Reply Cache
    Those indicate that your NAS is not fully compatible with Snow Leopard. 
    1/11/12 8:53:35 AM
    kernel
    jnl: disk2s2: replay_journal: from: 67182592 to: 78680064 (joffset 0xa7b8000)
    1/11/12 8:53:39 AM
    kernel
    jnl: disk2s2: examining extra transactions starting @ 78680064 / 0x4b09000
    1/11/12 8:53:39 AM
    kernel
    jnl: disk2s2: Extra txn replay stopped @ 79056896 / 0x4b65000
    1/11/12 8:53:49 AM
    kernel
    jnl: disk2s2: journal replay done.
    1/11/12 8:53:49 AM
    fseventsd[41]
    event logs in /Volumes/Time Machine/.fseventsd out of sync with volume.  destroying old logs. (253512 14 253512)
    1/11/12 8:53:50 AM
    kernel
    hfs: Removed 1 orphaned / unlinked files and 0 directories
    That looks like a problem was found with the file system (data) on the TM disk.  I don't know the details, but OSX tried to recover it from the journal, and found extra data on the drive.    Likely a result of the incompatibility mentioned above.
    1/11/12 9:47:40 AM
    com.apple.backupd[1169]
    Bulk setting Spotlight attributes failed.
    That's a problem writing to the NAS drive.
    But the backup continued after all this.
    1/11/12 1:25:07 PM
    kernel
    ASP_TCP Disconnect: triggering reconnect by bumping reconnTrigger from curr value 0 on so 0x9d00b44
    Something caused a disconnect.  Can't tell from the log what it was.
    I doubt it's a problem with something in OSX being damaged or corrupted, but reinstalling OSX isn't a major hassle, so might be worth a try.
    To be incompatible with Snow Leopard, this NAS must be at least a couple of years old.  It may be beginning to fail.
    Contact the maker.  See if there's an update to make it compatible with Snow Leopard.  If so, that might fix it.
    If not, or if that doesn't fix it, see if they have any diagnostics that will shed any light.

  • I recently upgraded to Mavericks and the time machine is failing to backup.  Time Machine began only backing up twice a day and now has stopped.

    I recently upgraded to Mavericks and the time machine is failing to backup.  Time Machine began only backing up twice a day and now has stopped.

    This is the error message I got:
    2014-03-18 17:02:30 -0400 com.apple.backupd[4971]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/TOSHIBA EXT/Backups.backupdb/Quincy’s iMac size:37
    2014-03-18 17:02:30 -0400 com.apple.backupd[4971]: Backup failed with error 2: 2

  • I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups.

    I recently took my imac in for a recall on the hard drive, they replaced my hard drive, i used time machine to restore all my files. Now when I turn time machine on it says back up failed not enough space, it is not overwriting old back ups. Why? Please help

    http://pondini.org/TM/FAQ.html

Maybe you are looking for