TS1398 I updated my iPhone 4S to iOS 6. Now every time I connect to my home network I have to input the routers passcode why is this happening?
Every time since I upgraded both my iPhone 4S and my iPod touch when I go to connect to my wi if home network. I am asked to input the network passcode. This never happened before I upgraded. ( this is a known network). Cn anyone help?
I noticed that my camera app crashes when panorama mode is engaged - but only if the sound is switched off.
Similar Messages
-
I recently updated from my iPhone 3G to iPhone5. Now, every time I check my contacts, they are all duplicated. How do I resolve (stop) this?
Are you syncing contacts over the air with an iCloud account or with an email account that supports syncing contacts over the air in addition to syncing contacts direct with a supported address book app on your computer via the iTunes sync process?
-
Updated my iPhone 4 to iOS 6 and every time I try to move an app the iPhone reboots.
Not happy with the iOS 6 update. Some of my apps do not work. I try to move an App from one location to another the iPhone reboots. I guess the Apple logo is Apple's version of the blue screen of death.
The problem could very well be on Apple's end...maybe a server issue with the App Store. I just checked my iPhone 5 updates under Wi-Fi and get nothing but a white "Updates" screen with the busy cog spinning endlessly. Everything else loads fine...web pages & all other aspects of the iTunes Store. Updates is the only thing that is not working.
Checking the System Status page (http://www.apple.com/support/systemstatus/) show no issues, however it may not have been updated/Apple is not yet aware of the issue. -
I've tried resetting my network settings but it's still not working
I have exact same issue. And it is annoying - VERY!!
-
After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.
When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.
-
I updated my Iphone 4s to IOS 7, now it reboots after every 2 minutes, I tried to restore, but the reboot gets it disconnected from PC, help me solve this reboot issue..
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work. -
i tried updating my iphone 4 to ios 5.01 and then chnged my mind and tried to turn it off halfway the updating process.. now i can't turn it on... PLEASE HELP!
Hi jonnarink,
Try this:
http://support.apple.com/kb/ht1808
In short:
1) Make sure the iPhone is not connected to USB and, if it is on, turn it off by holding the power button and the home button together(takes about 6 seconds)
2) Once it's completely off, hold down the home button
3) While holding home, connect the USB cable and keep holding home until iTunes recognises the iPhone
It will force the iPhone into recovery mode, then you can connect to iTunes and restore your backup. Bear in mind that it will likely need to be updated to 5.0.1 anyway.
:edit:
Sorry, just saw Ralph Landry1's post above mine(typed mine a while ago, only posted now!) with the same link -
I tried updating my iphone 4 to ios 5.0.1, it keeps on showing error 3194 , but i have itunes 5 it still shows it what do i do?
http://support.apple.com/kb/TS3694#error3194. There is no iTunes 5. The current version is 10.5.1.
-
I updated my iphone 4 with iOS 6; now I can't turn it back on.
I updated my iphone 4S with ios 6; now it only goes to the apple screen and no further. It won't turn off and I can't get it to go past the apple screen either. What do I do?
If you have an iPhone 4S, you're in luck! You still have your Apple warrenty!
I would contact Apple either online, or go to your local Apple Store and set up an appointment with the Genius Bar.
Good luck! -
While updating my iphone 4s to ios6, I had to restore it. Now every time I connect to itunes, I get the "Set Up Your iPhone" window with the set up as new iphone and restore from backup options. After the restore, I got everything except my apps and music back. Do I need to set the phone up as new again?
Hi Vidbrent,
If you are having issues updating or restoring your iPhone, you may find the following article helpful:
Apple Support: If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Regards,
- Brenden -
I am trying to update my iPad 3 with iOS 6. Every time I do, it updates for about 20 minutes, then says an error ocurrs. Please help
Classic. Make sure that you've got the latest version of iTunes.
Good luck! -
I have an Iphone 5 and it will not connect to any WIFI networks - I have tried following the steps above (including reseting network settings) but it just says 'incorrect password' every time. How can I resolve this?
you have definitely tried the correct steps, all you would need to do now is a back up & restore to factory settings. If after that the issue remains then you would most likely need a replacement unit.
-
When I have installed updates for Firefox in the past, I have always lost my bookmarks. Why does this happen and is there a way to avoid it? I want to install the new update for Firefox but I am afraid of losing my bookmarks again. What can I do about this?
Welcome to Apple Support Communities
Do not worry. Hold Sleep (the button you have at the top of the phone) and Home buttons at the same time until your phone restarts, and then try installing the iOS update again. -
I'm using a late 2006 2.33GHz imac.
I clean installed 10.6 from disc then updated to 10.7 from download.
Now every time my computer goes into sleep it won't wake up.
The only way it will restart is to pull the mains lead out of the imac, put it back and try until it will start.
This only happened after reinstalling. Only Apple OS was on the imac and so it must be an issue with the software I believe.....
Anyone know how to cure this problem please?
Thanks
paulThis isn't a fix, more a workaround I used when I had wake from sleep problems that lasted from some point in 10.6.x, through 10.7 and into 10.8 (got fixed for me in 10.8.2). It seems to be connected with Bluetooth failing to wake up properly:
System Preferences>Energy Saver and set 'computer sleep' to 'never'. -
In Pages, In the past, I was able to edit a template and "save a version" to update the template. Now i have to rename the template to save the changes. Why is this happening? what happen to "save a version"? its no longer an option under "file". And I can no longer open the actual template, when template is clicked, it automaticaly opens an "untitled" version???
In your description you say the first document opens as the Title you gave it.
Templates always open as Untitled so it sounds like you have saved a regular document, perhaps into your templates folder which is possible.
Since you have already worked on it and it has been previously saved, Lion will now Save for you and Save a Version is available
The other document does open as Untitled so sounds like a real template and as Peggy has pointed out will not have either Revert nor Save a Version until you Save it and have changed something in it.
This is a classic example of just how Apple's supposedly "simplification" of the process, is leading to confusion of what has happened. That the conditions and resulting actions from those conditions is so convoluted says it all.
It all reminds me of the Monty Python Life of Brian sketch with the "simplified" John Cleese instructions to the class, as to if you have a brother in an older dorm whether to hang your hat and bag on the hooks provided. The trouble is Apple does not get the joke, that it is transforming itself into a frequently self contradictory bumbling bureacracy. The price of unchallenged self appointed geniushood.
The incoherent half baked stumbling juggernaut has reached new triumphs with its edict on enforced Sandboxing on developers when it is unable to follow even its own instructions.
Peter
Maybe you are looking for
-
Aperture 3: Photos don't display in browser or Viewer
Some of my photos don't display in the browser or Viewer panels. It's displayed as greyed out. I am running Aperture 3.2.2. I have tired to rebuild permissions and the database without luck. Updating the preview doesn't work either. For some of the p
-
Mail cannot display PDF written in Chinese
Hello, the PDF file written in Chinese works well on my macbook pro, but when I sent it to my iphone mail, it displays something like code that I cannot read BTW my iphone is 3gs, thank you for your help
-
LOL, great bug with faces-config.xml
Ok, its third time that I reinstall these stuff called JDeveloper. Im tired of this! Unfortunately I cant work with Eclipse cauz it doesnt works with OC4J embed.... Image as follows shows these freakin' bug... LOL http://img154.imageshack.us/img154/6
-
How to configure lpd in ubuntu
Hi Gurus I've installed SAPGUI for Java 7.20 in Ubuntu 10.10, I also have a printer Cups/pdf installed but I can't print documents via lpd. Is there something else to configure? Thanks in advance. Rolando
-
I forgot my memorable answers, what can I do?
I forgot my memorable answers, what can I do?