TS1567 Update - i-phone no longer recognised!

Hi,
I have just updated i-tunes as requested, however my i-phone 5S is now no longer recognised by i-tunes
Has anyone else had this problem?
John

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
     Note: You will need an active Internet connection. I suggest using Ethernet
                 if possible because it is three times faster than wireless.

Similar Messages

  • My upgrade to iphone software seemed to work but restore failed (1602)- now phone no longer recognised by itunes and itunes only offers restore to factory settings and warns that this will remove all data- also phone is in restore mode- unusable

    so I did the  itunes upgrade to 10.5.1 and then teh iphone 4 needed to b e upgraded to new ios5.1 - seemed to go all the way through, and the final restore seemed to fail. Now the phone is no longer recognised as personalised, just as iphone. Also  i cannot restore from backup, only restore factory settings and i am warned that I will lose all data. Can I force a restore from back up?  can I guaruntee that I can keep data from backups??

    Same with me. Anyone have an answer??

  • After software update ipad is no longer recognised in itunes? just sign on screen showing cable. othewise dead...

    after syncing i was asked to update software to %.01. Now itunes no longer recognises ipad and screen on ipad only shows cable...otherwis dead..

    Try the information found in this link;
    http://support.apple.com/kb/TS3281

  • 1.4.1 update and phone no longer turning on

    Hi,
    I have just uploaded the latest webos software, my phone is now stuck with the black screen and palm page, wont boot up at all... can anyone help ?

    Hello and welcome to the forums;
    If your phone is stuck on the Palm logo after an update, instead of removing the battery try resetting the phone by holding down the power button and moving the volume mute switch back and forth 3 times. Let go of the power button, and the screen will go black after 3-4 seconds, restarting the phone.
    If still stuck, then go ahead and remove the battery, waiting at least 2-3 minutes before reinstalling and powering back on. We do not recommend removing the battery at all unless it's a last resort and other reset options do not work.
    Finally, if you're still stuck on the Palm logo, it's time to download and use the webOS Doctor available at www.palm.com/ROM . You will need your serial number, which is on the back of your device under the battery. Make sure you know your Palm Profile user ID and password, as you will need to sign back into your Profile to recover your contacts. This process may delete information stored on the USB portion of the drive such as pictures, videos, and documents.
    Hope this helps,
    TreoAide

  • TS1538 iTunes (since update to 10) no longer recognises any of my Apple devices.

    I've followed all the troubleshooting and reached the point where I've discovered the AMD USB Driver is not located in "USB Controllers" but when I open "Imaging Devices" it's listed there, not showing Apple iPhone as a device anywhere.  What should I do?  Thanks for any help out there.

    I had the same issue and searched for about 6 hrs for a fix. I have Windows XP. Almost gave up and then I found and tried this and it worked for my new Iphone 5 I picked up yesterday! Hope it works for you as well:
    1. Right click on "My Computer" and select "Manage"
    2. In the left pane select "Device Manager"
    3. In the right window, expand "Imaging Devices" or similar imaging category
    4. You should see "Apple Camera" or something similar.
    5. Right click on the "Apple Camera" and select "Update Driver"
    6. Select second option "Install from a list or specific location (Advanced)", click next
    7. Check the box labeled "Include this location in the search"
    8. Copy and paste this path into the folder line - C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    9. Click "Next"
    Windows should now locate the necessary USBAAPL driver to run the Iphone or device and enable it's detection in Itunes

  • I have just updated my iphone via iTunes on my iMac. The phone took so long to restart that iTunes no longer recognises it. How can i reinstate it?

    I have just updated my iPhone4 via iTunes, but the phone took so long to restart the program no longer recognises it. How can I reinstate the iphone with iTunes?

    Hello Di57
    If you are having issues with your iPhone not showing up in iTunes, then check out the article below to resolve the issue. Also check your iPhone to see if a prompt is asking to trust your computer.
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/ts1591
    Regards,
    -Norm G.

  • HT1430 on attempting to update to latest os, phone and sim no longer recognised by system

    On attempting to update to latest OS today, phone cleared and phone and sim no longer recognised and cannot be activated or reset to previous OS.

    This is typically due to the iPhone being hacked to be unlocked or a faulty SIM card.
    Try replacing the SIM card with one from the carrier the device is locked to.

  • HT4623 how do you update your software if the phone no longer is recognised by the computer

    My phone no longer is recognised by the computer but has a little bit of charge and I need to get all the contacts and messages downloaded. Has anyone got any tips? I do not have Icloud downloaded on this phone.
    Thanks

    Welcome to the Apple Support Communities
    iOS 4.2.1 is the most recent version for an iPhone 3G. If you don't keep your programs on the Mac or PC, you can't install them on the phone

  • IPhone 4S no longer recognised on iTunes 10.6.3 after iOS 7 update

    Hi,
    I am having problems with my iPhone 4S connecting to iTunes now I have updated to iOS 7. iTunes says I need version 11.1 for my phone to be recognised (i currently have iTunes 10.6.3) so, I go to download 11.1 and it wont do it because my mac software needs to be updated to OSX 10.6.8! (i am currently OSX 10.5.8) so I go to the software centre to download 10.6.8 but it tells me that my mac is up to date....
    Is my mac too old now and Apple no longer support it?... (im on Leopard i believe - old i know!!) I hope not! updating my iPhone to iOS 7 should not force me to buy a new mac! (although i would quite like to update mine )
    Any support that someone can give me would be great becuase I dont live very close to a mac store to go in and ask for help.
    Many Thanks
    Kezia

    good question!! does this help?... i purchased it 4+ years ago
    Model Name:          iMac
      Model Identifier:          iMac8,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
    Thanks for your help! i have been putting off ordering the CD, but looks like i now cannot avoid it

  • PC no longer recognises my iPhone after trying to update to iOS 5...Help!?!?

    When returning from popping out of the house, as the Back UP and Update was taking forever, I came home to find that my iPhone has updated to iOS 5 but failed to Restore itself.  On top of this my PC no longer recognises my iPhone and issues a message 'USB Device Not Recognized'.  Now I have tried several attempts at fixing this, reinstalling iTunes, disabling and re-enabling USB Drives but nothing seems to work.  So I am now left with an empty phone, no contacts nothing, which can't even connect to my PC.
    Any Ideas???????????????????

    I had the same problem, I shut down the computer, disconnected it, etc... nothing helped. I went to the Apple store and they fixed it by restoring my phone to factory defaults and then updating. When I got home I connected to Itunes and it synched all my information back to the phone. If you have synched your information to Icloud you have to do it there!

  • I have an IPhone 4,with IOS 4.2.6. I just got an iPad which has an IOS 5.1.1. I want to update my IOS on the phone but the computer I use no longer has Internet access. How can I update my phone? Also, what iTunes version should I have for the updated IOS

    I have an iPhone 4 with IOS 4.2.6. I recently received an iPad with IOS5.1.1. I want to update my IOS on my phone but the computer I use is no longer hooked up to the Internet. What do I need to do? Also, does my iTunes need to be updated? It is whatever was available last July. Thank you for your time and courtesy!

    To update your phone requires using the latest version of iTunes, on your computer, as well as Internet access. The update to iOS 5.0 or higher is an erase/restore deal, so you not only have to make sure all of the content, currently on your phone, is on your computer and accessible, you need to update iTunes first, have Internet access, then update your phone. There is no way around this fact. You could go to an Apple store or use another computer, but you run the risk of losing all of your data it you do that.

  • I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

    I updated my iphone 5 to ios 6.0.2. my wifi says its connected but doesn't work now. It doesn't matter what wifi network I connect to. It worked before updating my phone. I can no longer use facetime or use wifi at all. I'm not sure what to do to fix it.

    I'm having similar issues with my phone.  I got my first iPhone recently, only had an iPod touch gen4 for a little over a year.  Updated to 6.0.2 when we got the phone (iPhone 5) a few days before Christmas.  When I got home on the evening of January 11, my phone would not connect the router anymore.  I was able to get it to connect after resetting the phone and the router, updating the router, and manually connecting.  That laste for a few minutes and then wouldn't work anymore.   I live in an area with very limited service, we have a network extender installed to help, and I am barely getting a 3G signal at times.
    My wife's iPad 4, my touchiPod 4, and all of our laptops are working just fine on the router.  When I dropped my kid off at school today, I noticed that I am not even seeing the school network anymore from the parking lot where before I got 3 or 4 bars and could connect to their wifi when I was there.  Today my phone goes back and forth between seeing my home network but not connecting, to not even seeing the network at all even from the same room that the router is in.
    Hope Apple fixes this problem soon..............

  • I have the iPhone4 and ever since I updated the phone, I can no longer connect it to my iHome (iD8)

    I have the iPhone4 and ever since I updated the phone, I can no longer connect it to my iHome (iD8)

    Yes, they told me I should contact apple, but apple hasn't helped me either! The iHome has worked perfectly all along and it still is working it has power just will not connect anymore to play my music.

  • Since i have updated to IOS 7.1 my phone no longer can make calls, connect using 3G or send text messages. can someone help please?

    since i have updated to IOS 7.1 my phone no longer can make calls, connect using 3G or send text messages. has anyone else had this trouble? i've tried resetting the phone, but had no luck. i can recieve calls and texts, but cannot make calls, text or use the 3G.
    please can anyone help?

    Yes! All the above. I have to buy a new phone. I contacted my phone company and there is nothing they can do 

  • Having downloaded update 10.5, the artists section of my iPod no longer recognises artists who feature on compilation albums. Instead it groups them under the album artist, ie various artists. Any suggestions?

    Having downloaded iTunes update 10.5, my iPod no longer recognises in the artists section those artists who feature on various artists' compilation albums. Instead the iPod groups them under various artists, and, if you are looking for a particular artist,who only features on a compilation, you have to remember or search to see which various artist album they feature on - all very frustrating, especially as it worked OK before the update. So far I've not updated any more - so I've not taken 10.5.1 or 10.5.2 because 10.5 caused me so many problems, but I'm wondering if the solution could be in those updates
    I've tried amending the iTunes library artist and album artist, and it is possible to get the iPod to recognise the artists, but the downside is that the library then removes the artist from the album, and you then have to play those tracks individually
    Has anyone suffered the same problem and, if so, has a solution been found?

    Having downloaded iTunes update 10.5, my iPod no longer recognises in the artists section those artists who feature on various artists' compilation albums. Instead the iPod groups them under various artists, and, if you are looking for a particular artist,who only features on a compilation, you have to remember or search to see which various artist album they feature on - all very frustrating, especially as it worked OK before the update. So far I've not updated any more - so I've not taken 10.5.1 or 10.5.2 because 10.5 caused me so many problems, but I'm wondering if the solution could be in those updates
    I've tried amending the iTunes library artist and album artist, and it is possible to get the iPod to recognise the artists, but the downside is that the library then removes the artist from the album, and you then have to play those tracks individually
    Has anyone suffered the same problem and, if so, has a solution been found?

Maybe you are looking for

  • Report from multiple subject areas

    Hi, I need to create a report from multiple subject areas. I am not sure whether it;s possible in OBIEE answers. Is there any other tool from OBIEE suite where I can design it? Thanks

  • Iphoto 11 on macbook pro os 10.7 - can't edit photos

    I am using an older macbook pro with lion 10.7 OS with iphoto 11 and aperture 3.  My iphoto library is a rebuilt one because I did have trouble with the original.  All has been working fine.  Suddenly I cannot edit.  On certain photos I get a message

  • Error while starting CE7.2 instance from SAPMMC

    Get an error while "Synchronizing Binaries". Installed CE7.2 trial on Windows7 Laptop with 3GB RAM. Swap space is 6GB. MAXDB is running fine now.Volume and Log files are not full.. dev_start trace below: Has this pbm been sorted out before? trc file:

  • HSDPA Wireless Data Card - Program not working

    Could you please help me with the problem bellow? This is a 3G USB stick which isn't working with my Lion. Thanks! Process:         HSDPA 3G Modem [958] Path:            /Applications/HSDPA 3G Modem.app/Contents/MacOS/HSDPA 3G Modem Identifier:     

  • Change the width and height of Landscape Layout for a report in 10G

    Hi, I'm new to reports and when i built the report in report builder 10g, the layout orientation was 'Landscape', hence I assumed that it'll be a landscape layout. However, the width and height fields of the main section are 11 and 20 respectively. H