TS1814 This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).

This is not working for me. I tried the Windows 7 Resolution steps multiple times to no avail. Please help. I am obviously connected to the internet (as is iTunes Store).
I am connected to the internet through a Verizon Wireless card, that is my regular internet connection.

I did all that HT1925 recommended and it was no help.  My computer still won't recognize my iPhone.  Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.

Similar Messages

  • TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

    I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

    Try this:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface.

    Hello, please help, my interface is connected to the microphone and when i open Logic 9 it does´t work. But I opened garageband to check and it works fine. I can record voice with any effect... With Logic i see the sound passes in the interface but does not arrive in Logic. The Loops works fine and i can hear. Is just the sound to record the voice it does not work. What can i do ??? I used Logic before in the same computer and it worked fine. Thank you so much, I´m a begginer recording myself.

    Make sure you go into preferences in Logic and set the audio input to be your interface and the audio output to be either built in output or the interface, if that is hooked up to something else. It sounds like Garageband has the audio interface set as the input but not Logic.
    Also make sure you close all other applications except Logic to ensure it is not running in slave mode...

  • TS3988 Each time I log into iCloud, I check, Keep me logged in, but this does not work.  I have to reenter user name etc each time I try to go back to my iCloud account.

    Each time I log into iCloud, I check, Keep me logged in, but this does not work.  I have to reenter user name and password etc each time I try to go back to my iCloud account.

    Hi,
    In Keychain Access app in the Menu for the App is Keychain First Aid.
    If you open this is the tick box for Synchronising the Login password with the so called Login Keychain ticked ?
    9:49 pm      Monday; March 16, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • TS1567 This solution not working for me. Cannot see my devices in iTunes

    I have tried uninstalling and re-installing iTunes MANY times over the last week and STILL cannot get itunes to see my ipod or iphone.  I have downloaded the latest version, I have tried turning off Microsoft Essentials, I have tried installing old versions of iTunes first and upgrading. I have run the program CCleaner after uninstalling to clean off any remaining files.
    I have found that when iTunes 10.6 was installed the Apple Mobile Device Services is not listed in Services and manually trying to install that fails and "rolls back".
    I had installed 10.6 and when I tried to upgrade to 10.7 I get the following messages.
    iTunes Installer Completed
    The installer encounted errors before iTunes could be configured,
    Errors occurred during installation. Your system could not be modified.
    Please run the installer again, or click Finish to exit
    I am running Windows 7.
    Any help greatly appreciatted.

    Hi,  I found the solution myself,  the usb driver was not recognizing the device correctly.
    For those having the problem of your ipod, ipad etc not being recognized/visible in itunes I found this solution on Youtube video fixed the problem.
    http://www.youtube.com/watch?v=fcVruKpZ2Uo
    What the video decribes is how to get the computer to fix the USB driver for the device.
    A bit disappointing that I did not receive any replies.

  • TS4045 This did not work for me but made it worse!

    I had a failure on the computer I usually have attached to the LED Cinema Display. So I switched to the current one: MacBook Pro 2 GHZ Intel Core i7 with 4GB Ram 1333 MHZ DDR3.
    It was fine at 10.7.4. Then I had to update to 10.7.5 in order to run Server Admin tools. It was an immediate freakout by the cinema display. Blinking/black out about every minute or so. I went through the community, found this article and ran this firmware update. It was a disaster and I started getting blinking at a rate of every 5 seconds.
    So HELP!

    mintos4 wrote:
    How do I do this?
    You can enable/disable Photo Stream above the "Sign Out" button on the iCloud control panel.

  • Alt + Tab macro not working for Sculpt Comfort Mouse in Windows 8.1

    Hi,
    I cant get a macro working in Keyboard and Mouse Centre for the Alt+Tab action. I've created the macro previously on windows 7 and all fine, but will not work on 8.1
    Alt(press) delay(10ms) Tab delay(10ms) Alt(release) 
    I have a sculpt comfort mouse, though I don't think that is a culprit, as the macro itself does not work.
    Alt+tab works fine on the keyboard, no problems at all.
    Please help as this is spoiling my interactions with my OS, which I use almost all day most days.
    Thanks,
    Paul

    Hi,
    The macro you mean is Macro Recoder, isn't it? As far as I know, this product may be not compatible with Windows 8.1. I found the link below show its system requirements:
    http://www.jitbit.com/docs/macrorecorder/index.htm
    In addition, it would be better to contact Macro Recoder support for further assistance:
    http://www.jitbit.com/support/
    Roger Lu
    TechNet Community Support

  • Headphones do not work for Mac Book Pro on Windows 7

    Hi,
    Can any one give me an advice what can be a solution to this situation when I plug in my headphones in Windows 7 and there is no sound in the headphones. Though it all reports working fine in Sound on Control Panel. I tired ti reinstall sound card drivers from install DVD (Cirrus and Rialtek I found there) but it did not help.
    Pls advice if you know an answer!
    Thanks.

    Same problem here but only with old speaker or headphone, not with my new one.

  • HT1933 This does not work ! I've tried several times and it keeps saying too many hhtps or something. I have duplicate charges from the same item that needs refunding ?

    I tried to reply to an iTunes invoice where it asks if there is a problem with order and can never get
    It to work ! I am being charged multiple times for same item and need to get the duplicates
    Refunded !

    I tried to reply to an iTunes invoice where it asks if there is a problem with order and can never get
    It to work ! I am being charged multiple times for same item and need to get the duplicates
    Refunded !

  • Why is my Safari not working and saying there is a problem when I try to open it ? Please help !

    Hello I am writing here because today as I was using my macbook air, a software update popped up. I updated everything that needed to be updated, and when my computer restarted I went to use Safari and it simply will not work now. When I try to open it, an exclamation point pops up and it says "Safarir wuit unexpectedly while using the TelevisionFanaticToolbar plugin." I believe that my internet connection is not the problem, because iChat and iMail seem to be working just fine. I really need help immediately, can anyone possibly run me through some steps on how I could possibly get it working again. What can I do ? Help !

    Hey blondgrl53,
    Sorry to hear you're having trouble. From your description sounds like you've got something installed in Safari as a plugin. Whatever this "televisionfanatictoolbar" thing is, you should probably get rid of it.
    In Safari try going to Preferences -> Extensions and seeing if you have any plugins installed that you can disable. That is likely the reason for your problem.
    Another thing you can do is remove your Safari preferences file by doing the following:
    in Finder hit command + shift + g and enter "~/Library/Preferences" with out the quotes.
    Find the file called com.apple.Safari.plist and delete it.  This is completely safe, all it will do is reset your Safari settings.
    If you go to "~/Library/Internet Plug-ins" you can also look in there for anything suspicious and throw it in the trash.
    Hope that helps.

  • HT201303 I purchased an app that said it works for my iPad 2 and it won't open or do anything. Please help me

    I purchased an app called camcorder pro which it says was compatible with my iPad I can't get it to open or do anything any suggestions.. My ipad has no camera on it I thought this app made a camera lens...Please help me fix or let me no how can I get refunded for this app. TY for your help.

    Hello Hyline2230,
    The following article details a number of troubleshooting steps that may be helpful in getting your app working.
    iOS: Troubleshooting applications purchased from the App Store
    http://support.apple.com/kb/TS1702
    Cheers,
    Allen

  • HT2638 This is not working for me, it brings me back to the same error message and when I click on it the screen disapears, any help

    need help

    There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. What were you doing when the problem arose?
    - Did it ever work properly?
    - Are there error messages?
    - What steps have you tried already to solve the issue.
    Anything else you can think of that might allow someone else to understand your issue.
    With this kind of information somebody can develop a starting point for troubleshooting the issue.
    Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

  • HT1526 This did not work for me.  I repeated the instructions several times and am certain I did not err.  I am using a MacPro with Mountain Lion (10.8.2).  Any ideas?

    I have tried repeatedly to empty the trash on a Mountain Lion MacPro (10.8.2).  Followed instructions to move files to terminal window, etc., using chflags -R nouchg, but the command, after pulling in 2600+ filenames by the drag/drop method suggested still failed.  I tried removing the flags from a subset of the files.  This time the command came back without an error, but I had the same result trying to delete, including when I said only to delete unflagged items.  Any suggestions?  There must be a better answer than going back to the install disk. 

    Any ideas?  Yes, would you like for me to request this be moved to the Mountan Lion forum instead of the Leopard forum where you posted it?

  • HT1212 This is not working for me, I've tried 5times. Half way the download, the disable screen appears

    I have done the restore instructions 5 times and all 5 times the disable screen shows half way thru the download.

    3194
    See the actions for that error here:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    iPhone Error 3194 - How to Fix iTunes Error 3194?
    Fix Error 3194 from iTunes during iPhone restore

  • HT5312 this is not working for me, the email doesn't arrive

    i need help because the "email" with the answers to my apple id security questions is not arriving and i can't use it unless i answer the questions but i forgot the answers

    If you aren't receiving the email to your rescue email address (and you've checked the spam folder on the account as well as the inbox and tried clicking the reset link again) then you will need to contact iTunes Support / Apple in your country to get the questions reset.
    Contacting Apple about account security : http://support.apple.com/kb/HT5699

Maybe you are looking for