TS1967 When trying to recover a lost iTunes library file, the programme moved all the normal contents of iTunes folder to the desktop. Now what must I do?

When trying to recover a lost iTunes library file, the programme moved all the normal contents of iTunes folder to the desktop. Now what must I do? There is no iTunes Library.itl file. On the desktop it is labelled iTunes Library.xml. Several others files have appeared there too including iTunes Music Library.xml
Before I can use the programme is it necessary to take another step?
Thanks for advice.

Don't worry. I'm all for caution. I guess I should have asked a little more about what steps you took while trying to recover your lost library?
The permissions thing may be a red herring, but if there is a problem with file access rights to the designated media folder iTunes has been known to place files on the desktop instead since it can access this location. The most common cause for such problems is working with a folder on an NTFS drive via a differnt account or on a different computer. In the normal course of events folders created inside user profiles have limited rights for other users.
Here are the typical layouts for the iTunes folders:
Normally the iTunes folder will be created at <User's Music>\iTunes with the media folder inside it. The library files should all appear in the same place so your comment about there not being an iTunes Library.itl file is confusing. Is it just the case that the .itl extension is hidden? The two .xml files makes sense from the above and indicates that the active library is not in <User's Music>\iTunes, but you have a recovered file from when it was.
If, in fact, the situation is that your desktop is acting as the main iTunes folder, and contains the library file, Album Artwork, iTunes Media and (optionally) Previous iTunes Libraries folders, with all other content being inside the iTunes Media folder, then it should be relativly easy to rearrange your into the correct shape and move them to the correct location.
If things are more complex, with something other than a library folder containing a media folder, then reestablishing the normal order is more complicated. The iTunes consolidate function is used to bring copies of files stored outside of the media folder into the media folder. It may sometimes be needed as part of the process of tidying up, however it leaves behind originals. There are circumstances where there isn't room for two complete sets of the media files on the same drive which is why I suggested the script might be useful as it produces the same results for the library without leaving the originals for manual clear up.
I think before you do anything however, we should get a clearer picture of exactly what is where. Could you perhaps take a screenshot of the desktop and post it here? Take a look at this post on making a split library portable. The same techniques I outline there can be used to lick your library into shape, it is just a question of working out which to use in which order for the best effect.
tt2

Similar Messages

  • ITunes error message: "The iTunes library file cannot be saved. You have exceeded your storage quota on the disk you are attempting to use." What do I do?

    I recently started receiving the following iTunes error message when I attempt to update the software on my iPad or iPhone: "The iTunes library file cannot be saved. You have exceeded your storage quota on the disk you are attempting to use."
    Any ideas what I need to do? The software won't update on my iPad, and I need to update through iTunes, as my iPad does not have enough free space to use the OTA service.

    You need to free up space on your boot drive.
    (I am going to ask the mods move this to the MacBook Pro forum.)

  • Ipad mini remote app will connect to my itunes library and apple tv but won't display content from itunes library on the apple tv section of remote app

    What I am trying to do is very simple, and I am sure I have done it before.
    I have an Apple TV (2nd Gen) connected to Wifi Network (Airport Extreme 802.11n) I want to stream content from the itunes library on my macbook pro over the wifi network to the Apple TV. This works no problem, home sharing is set up and I can see the itunes library under 'Computer' on the Apple TV interface. I can use the Apple Remote to scroll through and play content from my itunes. Works no problem.
    Now I want to use the remote app on my ipad mini to control the apple tv. Using up to date app (Version 3.01) Again, everything looks like it should work. I have turned on Home Sharing on the remote app settings. It works fine and both my itunes library and Apple TV show up on the interface. I can touch the itunes icon and control the itunes on my computer and play music and video on my computer screen.
    Now when I touch the apple tv icon I can't see my itunes library content to play on the apple tv. I see the below image. If I tap on the icon in the bottom left it takes me back to the screen in the first image. What is the strangest thing is that I can control the apple tv using the gestures interface! This isn't what I want though and I want to be able to see the itunes library on the screen of the ipad and play it on the apple tv. You can see in the video on this link (http://www.youtube.com/watch?v=UvEpgcE9KCs). This is what I am trying to do and I just don't understand why I don't get the screen seen at 1:25 in the video. Instead I get the screen seen in the below image. Any ideas? I know that the remote app is connecting to the apple TV because I can control it using gestures, just strange I can't see the content on the ipad like in the attached video clip, instead I see the screen in the image below. Any ideas would be greatly appreciated!

    OK, Problem solved. Software on Apple TV was VERY outdated. It had been sitting in the box for over a year and needed an update. Problem solved!

  • Ipad mini remote app will connect to my itunes library and apple tv but can't play content from itunes library on the apple tv

    What I am trying to do is very simple, and I am sure I have done it before.
    I have an Apple TV (2nd Gen) connected to Wifi Network (Airport Extreme 802.11n) I want to stream content from the itunes library on my macbook pro over the wifi network to the Apple TV. This works no problem, home sharing is set up and I can see the itunes library under 'Computer' on the Apple TV interface. I can use the Apple Remote to scroll through and play content from my itunes. Works no problem.
    Now I want to use the remote app on my ipad mini to control the apple tv. Using up to date app (Version 3.01) Again, everything looks like it should work. I have turned on Home Sharing on the remote app settings. It works fine and both my itunes library and Apple TV show up on the interface. I can touch the itunes icon and control the itunes on my computer and play music and video on my computer screen. 
    Now when I touch the apple tv icon I can't see my itunes library content to play on the apple tv. I see the below image. If I tap on the icon in the bottom left it takes me back to the screen in the first image. What is the strangest thing is that I can control the apple tv using the gestures interface! This isn't what I want though and I want to be able to see the itunes library on the screen of the ipad and play it on the apple tv. You can see in the video on this link (http://www.youtube.com/watch?v=UvEpgcE9KCs). This is what I am trying to do and I just don't understand why I don't get the screen seen at 1:25 in the video. Instead I get the screen seen in the below image.

    OK, Problem solved. Software on Apple TV was VERY outdated. It had been sitting in the box for over a year and needed an update. Problem solved!

  • "The iTunes Library file cannot be saved. You do not have enough access privileges for this operation"  What does this mean?

    Also why won't iTunes recognize my iPod Touch since updating to the latest version?  I have a PC and can no longer sync my iPod bc it never shows up under devices. 

    See if these help
    the iphone cannot be synced. you do not have enough access privileges for this operation
    Re: access privileges ????
    Re: Access Privileges
    The iPhone "phonename" cannot be synced. You do not have enough access privileges for this operation

  • What does it mean when itunes says itunes library file cannot be saved there is not enough memory availabe

    While downloading some music on Itunes, a dialog box keeps popping up. Says,"The iTunes Library File cannot be saved. There is not enough memory available." Am confused about what to do. Never had this problem before. Can someone please, help me?

    Exactly what it says. 
    Is there sufficient free space on the computers hard drive? 

  • ITunes library file question

    I lost the data on my external harddrive {long story}, but we've sent it to data recovery. If they don't manage to recover all my music files off there, but are able to, for example, recover the iTunes library file which is also on my external harddrive, is it enough to have just the iTunes library file to put my music and everything back into iTunes or do I need all the original music files as well?
    Thanks
    Message was edited by: compwizzy313

    So how come in order to keep ratings and play bounts etc, you need to have that library file if it's just a list of the songs?
    Those fall under metadata.
    (49972)

  • .xml file and iTunes library files are missing from the music folder

    I recently made a second itunes library on my external hd, today when I open itunes and choose this library, the .xml file and itunes music file are invisible or translucent, therefore I can't open my library. But when I go to my music folder they are missing. Another odd thing is that all my music is still in the folder. Is there a way to re-open my library w/o re-importing all my music? Can I some how get a new itunes library file?
      Mac OS X (10.4.10)  

    This is not an answer but I have the same problem. From time to time I clone my music drive to an external drive for back up. When I do, I burn a copy of the album artwork folder, iTunes Music folder, iTunes Library.itl, iTunes Music Libraru.xml, and iTunes Library file to CDRW. This is so I can copy them into the music folder in my user home drive of my laptop then hook up the external and have access my library. Trouble is the .xml file and iTunes library files don't always show up when I go to the iTunes folder in my Music folder. There either is a blank where they should be or the names appear with no icon and when I click to select, that dissappers too. I thought I had a solve by exiting iTunes and letting it save everything. It seems to bring the .xml file back but not the itunes Library file. Any thoughts?

  • TS3694 getting a 3014 error message when trying to recover my itouch. All PC software is currect, I have disconnected all USB ports and even turned off all security and still get a 3014 error. I got this after I upgraded to IOS 10.7.0.21

    I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.

    Did you try this:
    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good network.
    Also see:
    HT4061 error message 3014.: Apple Support Communities

  • HT201210 when trying to recover an iphone, anyone know how to fix an error 21?

    when trying to recover an iphone, anyone know how to fix an error 21?

    Error 20, 21, 23, 26, 28, 29, 34, 36, 37, and 40
    These errors typically occur when security software interferes with the restore and update process. Use the steps to troubleshoot security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
    Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See the steps under the heading "Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store." If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.

  • HT1483 I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is wor

    I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?

    What version of iTunes are you using?  The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
    B-rock

  • My ipad 1 wont turn on and when trying to recover it, coloured lines will come across the screen. help!

    my ipad isnt working and hasnt for about a year, i ahve recently found and it and need to use it again. i have spent hours searching the internet to find solutions but none have worked. when trying to recover it (holding down the middle buttona nd th top for 10-115 seconds) all that comes across the screen are coloured lines. please help i need to use this again!!!
    thankyou

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
     Cheers, Tom

  • Error when trying to recover files

    I'm getting a "No Backup servers found" error when trying to recover files from my Azure backup vault. Any ideas folks?

    Hi,
    Please login to Azure Portal and check if you are able to see other servers from which you have backed up data, in the Portal.
    Also, prerequisites for recovering file and folder data to a different server are:
    ·         The target server is registered with the same Backup Vault the source server was backed up to.
    ·         You have the passphrase used to encrypt the data from the source server.
    Regards,
    Manu Rekhar

  • EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

    EZ Vinyl Converter problem transferring to iTunes - window appears  "mixmeister programme has stopped working and will shut down". Then the data is lost, and I have to try to record/transfer again.  I have now tried many times.
    The deck is ION TTUSB05XL   Laptop   Asus V550C with Windows 8.
    Strangely I did manage to successfully transfer two tracks to iTunes, but all further attempts have failed.
    JJR

  • Trying to back up iPad to external hard drive, "iTunes library file cannot be saved. The disk you are attempting to use is full."

    This issue is somewhat complex so I will try to explain it as clearly as I can. Any help will be greatly appreciated.
    It all began when I kept getting popups from my iPad saying that I had not backed up since May. I realized that was pretty dangerous so I decided to finally try syncing it to iTunes, though I had avoided doing so for so long because I knew that when I tried there was no room on the computer. I then remembered that I have an external hard drive with plenty of storage space, so I got that out and set it up with a folder to move iTunes and the backup into.
    On iTunes I went to the Advanced Preferences and changed iTunes Media Folder Location to the G: folder, with the keep organized box checked. I also copied the previous backups from the original C: drive to G: so that I could delete the ones on C:.
    I used Junction Link Magic to link my now empty MobileSync backup on C: to a new (JLM would not work unless it was empty) backup folder on external hard drive G:.
    I plugged in my iPad to iTunes to sync it, and while it was backing up I checked the new folder on G: to make sure that the backup was being put there. It was.
    However, about halfway through I got the message "iTunes library file cannot be saved. The disk you are attempting to use is full."
    My question is Why? If it is being made in a 1.5 terabyte hard drive now, and not the computer, why is there no disk space? My guess is that it must still somehow be saving to the computer. But how? And how can I get it to save solely on the G: drive where there is enough room?
    I am running Windows XP and the latest version of iTunes.
    An additional but not as crucial issue:
    Much of my music has been lost, with the being displayed next to the songs in the iTunes library, and only 50 (purchased) songs remain on my iPad. This was because those missing songs were stored on a different external hard drive ( I:). However, I copied many of the music folders on I: over to G: so that everything could be together. I am wondering if it is possible for me to get these songs back onto my iPad. But this is not my most important issue right now, because I believe that once I get the first issue solved I can simply plug in I: and G: at the same time while syncing the iPad, and get the songs back.
    Note: I have come to realize the iTunes program itself is still under Program Files in the C: drive. Does this have to do with anything?

    Short term, free up some disk space. Long term, move the library to a bigger drive.
    tt2

Maybe you are looking for

  • Magic Mouse on a G4 computer

    My buddy has a 400 MHZ Power PC G4. It has 704 MB SDRAM and 10.4.11. I want to use a D-Link Bluetooth adaptor (usb) to have him be able to use a bluetooth mouth and keyboard on his computer. I had thought that all I would have to do was load the soft

  • Cannot navigate out of current form

    hi i have a formmodule id filled correctly. And i need to navigate to this form through this id. Therefore, i use go_form(myformmodule) when this particular form is closed, i got the error "cannot navigate out of current form". can i verify before th

  • Master Image in Library Cannot be  Found

    I have a large number of NEF files in my library which, since I upgraded to 1.5, now show a gray thumbnail with a red question mark and the "Referenced Image's Master File Has Not Been Found" badge. Most of the files in the library display properly.

  • I have Google 2-Step Authentication, which is causing problems in Apple's Mail program, any advice?

    I have Google 2-step authentication on my Gmail accounts, and until recently have used it with no problems whatsoever.  What you have to do is generate an "application specific password" for apps where you cannot enter you "google authentication code

  • Are there any problems with running PPro CS4 under WIN7...?

    I've successfully created a dual boot of WIN XP Pro 64-bit and WIN 7 Professional 64-bit on my RAID10, 2-TB drive. I've been running numerous basic programs successfully under WIN 7. It has been totally stable for over a month and therefore I am abou