TS2446 My Personal security code was entered incorrectly too many times by my child and now it says I need to connect to itunes to resorer and unlock IPad
My Personal security code was entered incorrectly too many times by my child and now it says I need to connect to itunes to resorer and unlock IPad. Not sure what to do.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iOS- Forgotten passcode or device disabled after entering wrong passcode
3. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
4. iOS- Understanding passcodes
5. What to Do If You've Forgotten Your iPhone's Passcode
6. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
7. Restoring iPod touch after forgotten passcode
8. RecBoot: Easy Way to Put iPhone into Recovery Mode - if all else fails.
Forgotten Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode
If this method does not work, then you will need to fully Restore your
device as New
Similar Messages
-
My ipod is disabled because the password was entered incorrectly too many times. Help
my ipod is disabled because the password was entered incorrectly too many times. Please help???
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
My friends child has entered my password incorrectly too many times and my contacts and texts are now gone. The last back up was completed in August 2011, I havent completed a new backup yet - Is there a way of getting all the data since then without a current backup?
Hi Cid_L,
Welcome to the Community,
Well that's a bad news, it seems no other source from where you can recover your data unless you had done backup using Blackberry Protect and if you had not done that then I am sorry there is no other way of getting it back.
Prince
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it. -
When I turn my ipad on it says it is disabled and connect to ITUNES
FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug (very important)
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...
Note: Data will be lost -
how do we reinstate ipad use when it has been disabled by pin number being entered incorrectly too many times. it is now locked
This article contains instructions on what to do if your device is disabled:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212 -
My son put a passcode on his IPOD TOUCH and couldnt remember it and entered it too many times. Now it has disabled the Ipod and says please connect to ITunes and ITunes will not connect to it because it has been disabled, I have already spoke to an Apple representative and did exactly what they told me to do to help reset the Ipod but that didnt work. So I am trying to figure out how we can get back into his IPod even if we have to factory reset it because nothing is working, not their instructions or the internet instructions for reseting it.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device
1. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. iOS- Understanding passcodes
4. What to Do If You've Forgotten Your iPhone's Passcode
5. How to Recover Forgotten iPhone Restrictions Passcode | The iPhone and iPad
6. Restoring iPod touch after forgotten passcode
7. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
Restrictions Passcode Help
1. How to Recover Forgotten iPhone, iPad Restrictions Passcode -
how do i disable the phone if its not letting me restore it any way without the passcode and i dont remeber it
Place the Device into Recovery mode...
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most Recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
Please help i don't want to lose all my info and pics from the last week for the 4th time.
If the computer does not recognize it and you've forgotten the passcode, there is no other option.
If you've been using the device as designed and syncing regularly, only the data since the last backup will be lost. -
Today was my ipod disabled. it says I need to connect to iTunes, but when I connect it brings up an error message that says I have to enter code but my problem is that I forgot the code!!!!
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
If not successful, try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
An elderly friend has given me her iPad to"fix". She has entered passcode incorrectly too many times (I now have the correct passcode). The ipad is now disabled,has never been connected to a computer . Can it be opened without loosing what is on it?
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.htmlhttp://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tbhttp://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Devicehttp://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htmhttp://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
I entered my passcode incorrectly too many times and now my iPod Touch is diasbled.
I enterd my passcode incorrectly too many times and now my iPod Touch is disabled. Currently, my laptop is being fixed so I cannot connect it to iTunes without losing everything on my iPod. Is there any way I can regain acces to it?
Place the iPod in Recovery Mode and restore via iTunes.
iOS: Wrong passcode results in red disabled screen
That is the only way ands the iPod will be erased. The screen-lock is a very good security feature. -
I just put snow leopard 10.6.8 on my macbook pro and I was told that I could purchase Apature for photo management- now its says I need a different version.... is there an older version I could get? so frustrating.
The current version of Aperture requires 10.7.5 or later.
Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You can purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard — Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
Snow Leopard General Requirements
1. Mac computer with an Intel processor
2. 1GB of memory
3. 5GB of available disk space
4. DVD drive for installation
5. Some features require a compatible Internet service provider;
fees may apply.
6. Some features require Apple’s iCloud services; fees and
terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service — this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
Lion System Requirements
1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
or Xeon processor
2. 2GB of memory
3. OS X v10.6.6 or later (v10.6.8 recommended)
4. 7GB of available space
5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
OS X Mountain Lion — System Requirements
Macs that can be upgraded to OS X Mountain Lion
1. iMac (Mid 2007 or newer) — Model Identifier 7,1 or later
2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) —
Model Identifier 5,1 or later
3. MacBook Pro (Mid/Late 2007 or newer) — Model Identifier 3,1 or later
4. MacBook Air (Late 2008 or newer) — Model Identifier 2,1 or later
5. Mac mini (Early 2009 or newer) — Model Identifier 3,1 or later
6. Mac Pro (Early 2008 or newer) — Model Identifier 3,1 or later
7. Xserve (Early 2009) — Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.
Are my applications compatible?
See App Compatibility Table — RoaringApps.
For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion. -
I have an ipad 2, yesterday I updated my ipad going in to settings software update, then the ipad went into resore mode saying it needs to connect to itunes. I did that and itunes said it was goingo to do a resotre and I lost all my info, pictures, contacts. Is there a way to recover all my info?
You should be able to reconnect to iTunes and then you should see an option to restore to your ipad from your last back up in iTunes.
-
My iPod is disabled, but not because I forgot the password. It says I need to connect with iTunes, but when I try it says I need to enter the password. What do I do?
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode. -
i was trying to update my iphone and it downloaded the software but when it went to install it it turned off and wont turn back on and says i need to connect to itunes and ive tried but itunes doesnt recognize its there
Connect in recovery mode and restore, as described in this article:
If you can't update or restore your iOS device
Maybe you are looking for
-
Wifi no longer works after update mountain lion
Ls, I've updated my MacBook Pro to Mountian Lion yesterday. Ever since the update I've lost the ability to use the internet over Wifi. The system shows a check mark on the left of my network list, however there is no outside connection. I have ran th
-
Insert Blob column in the client errors ClassCastException: oracle.sql.BLOB
Hi, When I try to insert and commit a Blob column(picture) I am getting the following exception. Is there any jar I need to add or any other setup I need to do to accept the BLOB column in the olite client database. 500 Internal Server Error javax.fa
-
Stuck on creating my first dotnet stored procedure
Removed text. Removed text. Can someone delete this? Message was edited by: Author user549433
-
Problem while sending unicode (utf-8) xml to IE.
Hi, I have encoding problem while sending utf-8 xml from servlet to IE (Client), where i am parsing the xml using Ajax. In the log I can see proper special characters that are being sent from the servlet. but when same is seen in the client end,, it
-
Extracting purchasing info records
Hi all, I am extracting purch info records and using SE16 and tables EINA and EINE to include plant, info record, material and vendor. I also need to include price of material. any ideas on what table to use for this? Thanks in advance.