TS2709 I can't get Apple Tv to sync. I have opened a port (3689) for itunes sharing but it has not solved the issue. Any ideas?
I can't get Apple Tv to sync. I have opened a port (3689) for itunes sharing but it has not solved the issue. Any ideas?
do you mean sync or shared lib?
because unless you have the old silver alu appletv with a harddisk sync is not possible at all
Similar Messages
-
My ipod nano (6th gen) is no longer identied properly in itunes. I have followed all steps in the troubleshooting guide (uninstall and reinstall itunes several times, Apple Mobile Device running ok, verified USB port runs) but the issue is still not resolved. What can I do?
Universal Serial Bus controllers
Intel(R) ICH9 Family USB Universal Host Controller - 2934
Intel(R) ICH9 Family USB Universal Host Controller - 2935
Intel(R) ICH9 Family USB Universal Host Controller - 2936
Intel(R) ICH9 Family USB Universal Host Controller - 2937
Intel(R) ICH9 Family USB Universal Host Controller - 2938
Intel(R) ICH9 Family USB Universal Host Controller - 2939
Intel(R) ICH9 Family USB Universal Host Controller - 293A
Intel(R) ICH9 Family USB Universal Host Controller - 293C
USB Composite Device
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer. -
Has anyone else had this problem that just got one? This is a christmas gift and I was attempting to explore the radio feature and discovered the issue. Do we have this feature or not?? Thanks for any insight anyone can give. Thanks and Happy New Year!!
You are not pushing the headphones all the way in. Make sure the white plastic is flush with the iPod.
-
Can anyone supply a answer to the above problem?
I have the same problem. Turned sharing on and off in itunes and on the appletv.
Apple - is this an issue - others have been complaining too. I am not impressed with the Appletv 3 so far!!!
Adam -
i had a iphone in 2010, i purchased music which is still stored on my original apple id, but when i try to transfer the music ,and download apps all it says is your apple id has been disabled, i have tried re setting a new pass word but this has not solved the problem can any one help please
Contact itunes support
-
After connecting my Apple TV this morning, I have no sound. It is hooked up to play through my television speakers. Any ideas on how to get sound? Also, I tried hooking it up through my surround receiver, but could not get it to come up on my ty screen, what can I do to correct this problem?
Have you tried adjusting the "Audio Out" and the "Dolby Digital" settings in settings > audio and video? It may be worth trying several combinations of these settings, although typically it is the "Dolby Digital" setting that causes most problems for users.
Also make sure that you have correctly mapped the input port on your sound system to the output, if you are unsure about how to do this, refer to the manual that came with your sound system.
Have you tried playing various content sources (i.e. podcasts, music, iTunes Store video, other video etc), do you have the same problem with all types of content? If you use optical you might also check that you can see a red light at the end of your optical audio cable. Is your optical audio cable plugged straight into your sound system, or does it go through a switch or other device? -
I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package. A program required for this install to complete could not be run." Any ideas?
This has been fixed. Answer is that I needed to go to "Apple Software Update" and repair it. (From my Control Panel).
-
<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/880054]]</blockquote>
Question
Every time I try to open Firefox I get a popup saying it is already open, and to close it or restart; but it is NOT open, and restarting doesn't heDuplicate Thread LOCK please
* Continue here - https://support.mozilla.com/en-US/questions/880054 -
I cannot shut dow my MacBook Pro using the apple icon (as it was suppose to be), actually I have to press and hold the on/off buttom. I have taken twice for Mac dealer and they did not solve the problem. What must I do? I would to remark that I have installed 2 antivirus and uninstalled one of them. Since then I have facing this troublesome issue. Thanks
Uninstall the other AV software. They are not needed. All they do is cause trouble like you are having now.
If you have been forcing the Mac to shut down with the power switch you may nave corrupted your disk. You should repair it with disk Utilty to remove any corruption the shutdwons may have cased.
Allan -
I was installing iTunes 11.1.4 and it was unsuccessful. I get the message 'Error 7 (Windows error 126). If I now try to open iTunes I get the message that 'MSCVR80.dll' is missing from my computer. Trying to download again has not solved the problem.
Troubleshooting issues with iTunes for Windows updates - MSVCR80
-
I am getting a 'MIDI timeout' error message when I open garageband. I am not using any other apps so why is this happening. Restarting does not solve the issue.
I should also add that I am using core audio, no external MIDI device and Garageband v 6.0.5. Thanks
-
Ive bought Apple TV and upgrade my macbook air Os X ver 10.8.2 but i could not see the airplay on the top menu bar . please help! thank you.
The ability to use AirPlay is BOTH an OS requirement(Mountain Lion) AND has hardware requirements. You need to check and see if your 2010 Air will support Airplay.
-
When I use Firefox without menu bar I can see bookmarks. How ever when I activate menu bar the bookmark is missing from toolbar. I tried opening in safe mode and resetting toolbar but it didn't fix the issue. I am using version 7.0
Do you mean the Bookmarks Menu button on the Navigation Toolbar?
You only see that button if the menu bar is hidden. -
My daughter has an iphone 5s and I have her old 3GS. She receives all my imessages that I rcv or send to other people. Can anyone advise how to stop this? we have removed the 3gs from her itunes account but it hasn't stopped the issue.
There are a lot of posts in the forums today with people having problems with iMessage. There was also a published outage yesterday, so it's possible there are still some issues that may be impacting you both.
I would just wait it out - I'm sure it will be sorted out soon. -
I already have a CC account through my educational institution but it did not include the Lightroom mobile. So now, apparantly, in order to get Lightroom mobile I have to purchase the PS/LR photographers package but when I went to do it I was told that I already have a CC account. What am I to do?
I think all you have to do is go to the App Store and download Lightroom mobile onto your mobile device. You don't need another package in order to get it.
Maybe you are looking for
-
Can't joint existing wireless network
I have an AX used only for iTunes. It's set up wirelessly. It recently stopped working and I can't get the AX to re-connect to the existing wireless network. No matter what I try, all I get is a blinking amber light on the AX. I have a Netgear wirele
-
Is it possible to open a program when connecting an external hard drive?
Is it possible to open a program when connecting an external hard drive? I have a external hard drive with an iphoto library. I just want to connect my drive and automatically see iphoto open! Possible? I know there are some action scripts, am i righ
-
EIS and Essbase Error Number 1030011
Hi Guys,<BR>Please help if you have seen this issue before using Drill Through Reports on EIS and Essbase. Using Essbase 6.5 and EIS 7.0 Version. Created a Drill Through Report and trying to do it from Excel. When i click on the cell in Excel it disp
-
Seeded Reports within Oracle BPA Suite...
Folks, Would you be able to point me towards any Demo Script that I could follow against our Demo Databases to test all the seeded reports within BPA? I was looking to run these reports against any of these Demo Database: "Demo70" or "United Motors G
-
Prequery Key Figure Value to Pass to Subsequent Query
I need to be able to do the following: Run a query that calculates the Quantity of a material that has not yet shipped. (Query has GI date = #) This value then needs to be used by another query on a different cube that determines our current invento