TS2771 My daughters iPod touch does not turn on even after hooked up to charger for over 24 hours. Tried to hold the power button and home button at same time for 10 seconds and still did not turn on.
My daughters iPod touch does not turn on even after hooked up to charger for over 24 hours. Tried to hold the power button and home button at same time for 10 seconds and still did not turn on.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Similar Messages
-
IPod Touch 4 has gone wonky even after factory reset!!!
I have an iPod Touch 4. It has the latest o/s (6.1.3, there isn't anything newer available). I am running the latest iTunes. I have a pc with windows 7. Everything was working great up until about a week ago. All of a sudden my ipod crashed and got stuck in a boot loop... I couldn't get it to respond any other way so I did a factory reset and restore. I had massive issues after that -- most of my apps wouldn't sync/install. Very little would work. Basically it's useless. So I did another factory reset and restore. Same problem. Must have done this a dozen times. It takes a long time to do a restore btw and it fails on top of that...
So today I finally did a factory reset and set it up like new instead of doing a restore. I installed only a few apps, not all. It appeared to work ok. I just did a sync and started to install more apps and viola -- funky iPod again... It appears to work, apps open, you can even play or use them. Then randomly it turns screen off, closing the app and appears to reboot (but it doesn't reboot every time)... Things do work on it, I get push notices ok... I had turned off the screen lock thing so I didn't think it should be turning the screen off anymore...
I might add, even during a sync it appears to be doing something -- it beeps, screen goes black, apple logo come up, it comes up again but its super fast so I am not sure if it's rebooting itself or what? The sync just sits there waiting... So it never appears to be dropping the connection...
This is driving me batty!!!!!!!!!!!
I tried doing searches online and it appears I am not alone... Is this some kind of problem with the latest version of itunes?
Is it my ipod going belly up?
I bought this used off amazon about 1 1/2 months ago... Should I contact the seller for replacement?
Suggestions?
If I took it to the apple store I am sure it's not under warranty so I don't think they would help me...
Everyone please chime in cause I would LOVE to use my ipod again! It's not much use to me in this state!!!!!!!Well my friend, I do appreciate the help!
it looks like it may have been a bad app or multiple bad apps... or maybe even corrupted stored data...
it appears to be working ok now -- i've added about 1/2 my apps back... a lilttle at a time... doing backups before adding anything new each time... and it's ok... there were only a few games I cared about keeping the data for and I was able to pull that data out of some old backups using iBackup Robot... careful to pull ONLY the data for a handful of apps, NOT all the data for everything... I even decided to give up on 2 games and start over again cause I suspect they may have been part of the problem as they have new updates all the time and the updates are usually flawed.. so i just started over on those 2...
so the lesson Illaass to learn here is, before you jump in going on about how it's a bad logic board which it appears NOT to be -- let the discussion I was hoping to have with others and not you (no offense, others who actually have had this problem not someone parroting back what he's read) take place...
and if you see someone posting a similiar problem to mine -- suggest what I did first! cause most of us (including myself) don't have $199 sitting around doing nothing to buy a new ipod with... lol
but i do thank you for trying -- your heart was in the right place! -
Can I connect to both TC wifi and home wifi at same time?
I don't see this listed anywhere and I assume the answer is "no." But here goes...
I would like me TC to be on a separate wifi for all my apple devices in the home for backups only. I have about 5 devices including 2 ipads and 1 iphone. Then allow those same devices to connect to the home wifi for surfing. Basically, I want Time Machine to access one network/password and my browsers another network/password. Of course, I want this to happen automatically and not by selecting the TC network each time I want to backup and then switching to the other when surfing.
I know I could connect to my router via hardwire, but was hoping I didn't have to do that.
ThanksThanks... I assume I could switch back and forth between networks if I really wanted them to be on separate networks?
If you cannot run ethernet.. see if homeplug (ethernet over power) adapters might work for you.. when they work they can work very well.
You can also add a wireless bridge between the main modem and the TC.. but for this to work it must be another apple router. eg express or a cheap second hand extreme can work nicely.
Let me say you will very quickly get tired of switching.. whatever you are on,, you will want the other.. start the network design right.
Indeed, both Bob and I will tell you, if at all possible run ethernet.. do it properly in the wall.. get a data cabler in if you are not up to the job.. yes it is expensive.. and once it is done.. it will work properly forever more.. no other solution works as fast.. is reliable and is hassle free. -
Can wifi and ethernet be used same time for time machine?
Hi
Can an ethernet cable be used for the big backups with wifi being used for interim backups?
It seems the wifi method is ok for working in another room, albeit very slow. But when i am near the time machine unit would it be possible to backup via an ethernet cable and if so how would i set this method up?
ANy help appreciated.
Rgds
kevYes, it is possible for a computer to have two (or, if you have a tower, even more) IP addresses. By default the computer will use the one that is first on the list in the network panel in System Preferences.
-
Itunes:
We're sorry, we are unable to continue with your activation at this time.
Please try again later, or contact customer care.see http://www.oracle.com/support/products/oas/sparc30/html/ows08811.html
-
Ipad mini will not turn on even after a reset? Any suggestions! While playing angry birds ipad mini froze, hit home button Angry birds shut off, slide bar screen came up, slide bar, went to angry birds again started playing and froze, pushed home button screen went blank and now will not turn on. Need help!
Try holding your on/off and home buttons at the same time until you see the Apple logo.
-
hi..
i've got problem with my iphone 4s gsm factory unlocked it won't connect to a wifi. i tried to hold the power and home button even reset the network setting but ended with i am not even can turn the wifi on. does any body can helpme?See this: http://support.apple.com/kb/TS1559
If you carefully follow all of the instructions in this tip and none of them restore WiFi then your radio chip has failed and you need to get the phone replaced by Apple. -
we are trying to open a apple ID acc for my daughters IPod touch.I have a apple ID acc with my IPhone. It wont let us us use the same email ( she doesnt have one) but wont let us us a fake one. What do we do?
The only way to get an apple ID is to have an email account you've never used before. The only thing you can do is make her an email.
-
SSO and User Mapping at same time
Hi,
Can we use SSO and User mapping at same time between Portal and SAP Backend system?
For some of the users the user id is different in both end.
After implementing the SSO... Will it affect the existing user mapping? and the system alias created for that?
If not, Can we use both SSO and user Mapping same time?
Thanks,
VBHi VB,
In this case I suggest you create 2 systems one you might have created for users who are having common user ids in portal & at the backend system.
For the users whose ids are defeering you can create reference system and in user managemant property of that system
Authentication Ticket Type - Select -SAP Logon TicketSAP Assertion Ticket
Logon Method - UWPW
User Mapping Fields - {100,200,300}Client;Language
where 100,200,300 are the clients of the backend system.
Assign this system in the ivews.
Thanks,
Vishal -
I 'think' my Ipod Touch is in recovery mode and people say to hold the power and home button for 10 sec and i did, but its still not turning back on. Plus its dead and wont charge. PLZ HELP ME!!!!
- If in recovery mode the screen will have an iTunes logo with an USB plug.
- Have you tried connecting it to your computer for a n hw and then see if it appears in iTunes. If it does restore the iPod.
- If screen is blank, try placing he iPod in recovery mode and then restoring. For recovery mode:
iPhone and iPod touch: Unable to update or restore -
My mac hung up while installing an update. It took hours and still did not complete the update. I restarted my mac. Upon turning it back on, a wheel has been spinning on a grey screen. I tried to reinstall OS X from utilities, but encounter an error. What do I do?
Hey Manaskala,
First point of call on all grey screen issues is the following:
http://support.apple.com/kb/TS2570
Given this issue has appeared after a software update, I'd advise you do the following instead though:
1. Get an external hard drive, with enough space to put the entire hard drive of your Mac onto. Make sure you've safely copied any data you have off of it, as the next step will erase it.
2. In the recovery HD of your machine, use Disk Utility to format you EXTERNAL hard drive with the partition table as GUID, and the format as Mac OS Extended (Journaled).
3. Get out of Disk Utility, and click Reinstall Mac OS X.
4. When asked where, choose to install onto your external hard drive.
5. When the download and installation is complete, your Mac will reboot into a clean fresh setup screen. Make your user account an administrator, and make up a name and password; I use 'Test' and 'test'.
6. Your machine is now running from the external hard drive, not the internal hard drive, so don't be alarmed when you don't see your files.
7. Open the finder, you should see 'Macintosh HD' in the sidebar. This is the internal hard drive of your computer.
8. Open Macintosh HD, and copy out the following folders into a new folder on your desktop:
-Users.
-Applications.
-Library. (This only needs to be done if you use 3rd party software that saves things in the /Library, do a quick google and see if it does e.g. Photoshop, Protools).
9. When these have copied (it'll take quiet a while), you can now use Disk Utility to erase your hard drive. Don't erase Macintosh HD but the ENTIRE hard drive on the inside of your Mac, and as Thomas A Reed mentioned, there was likely an existing issue on your HDD so please go to Security Options and choose 'Zero Out' before clicking erase. This will rebuild the partition table which was a possible cause of the failed update.
10. Reboot the machine holding 'Option', go to recovery HD.
11. Choose 'Reinstall Mac OS X', this time onto your INTERNAL hard drive.
12. When this is complete, make another admin user called test and password test, like you did last time.
13. Run Software Update from the menu of your Mac.
14. In the Finder, you should see your external Hard Drive. open it up, inside that you should see your desktop etc, and on the desktop will be your folder containing Library, Applications and Users.
15. Go to Finder up next to the and choose File -> New Finder Window.
16. In your second finder window, open up Macintosh HD (through the Go -> Computer menu), and go to your Users folder.
17. Open the Users folder in your first finder window, and copy your user folder (has your name on it) into the second user folder (the one inside Macintosh HD).
18. This might take a while.
19. When complete, go to System Preferences -> Users and Groups and unlock the padlock.
20. Click the '+' sign, and make a new administrator user.
21. Now, the fun bit. Note the name of your user folder you copied, e.g. 'Nathan', containing all of your stuff. Note the difference between your user folder (has your name on it) and the Users folder (contains YOUR user folder, guest folder and shared folder).
22. Make the ACCOUNT NAME of your new adminstrator user the EXACT name of your user folder (normally lower case and without spaces), this is case sensitive folks. Your full name can be whatever you want, usually your full name.
23. Then click create. You should be informed that a home folder with that name in it already exists in the Users folder, would you like to make your new account from that folder? say YES!
24. When this is complete, log out of the Test user, log into your new account we've just made, all your stuff should be there.
25. ???????
26. Profit.
There's a few little bits that may need to be cleaned up afterwards, applications folder from your external hard drive should replace the applications folder on your internal hard drive, if the previously mentioned /Library folder contained important goodies then that should replace the /Library folder on your new Mac.
Hopefully that will help you out, straight after that is done make sure your stuff is there, erase your external hard drive and turn on time machine! -
My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue
i have the same problem...my ipod is 4th generation?uggghhhhh
-
my phone turns off and does not turn on, even i tries holding power button n home button for few min.... its shows nothing. i connect it to the computer n it doesnt show in itunes. plz reply wats the prblm wid it
Hi kamalkumar,
I'm sorry to hear you are having issues with your iPhone.
The article below will provide some troubleshooting steps for this issue:
iPhone: Hardware troubleshooting
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged. Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
I hope this information helps ....
Have a great day!
- Judy -
my ipod touch does not turn on after steps 1-4. It only shows the apple logo and turns off
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
The screen on my iPhone turned into an xray like display. With the assistance from Apple Support, I Upgraded the software version. But still did not resolved the issue.
Probably a setting. Look at the manual.
iPhone User Guide (For iOS 4.2 and 4.3 Software)
Maybe you are looking for
-
Hello all, I'd like to know if it's possible to attach an HTML document to an external mail (or even a work item) in a workflow. I have a custom container multiline element (type W3CREATPAT-CONTENT) that contains a table of strings (the html file) an
-
my ipod is supposed to hold 500 songs but over half of its room is taken up by "other" and i cant get rid of it! there is nothing on my ipod except for music no photos no album art no contacts no nothing!! HEEEELP!
-
Way to caputure the direct costs of the particular material
As per my knowledge, we can capture all the direct costs like freight, insurance etc. by maintaining the conditions in Purchase order against that material. If conditions not maintained, i we want to capture any additional costs with respect to that
-
A colleague of mine is using an OMEGA brand handheld thermocouple meter to measure up to four temperatures from his rig. The device has an RS232 computer link to download the real-time data to an application provided with the device. My colleague wou
-
Hello, I want to know how to have a double SSID but it's forbidden to have a wireless interruption with the wep which is on my cisco aironet 1242AG. I need to have wpa2 in addition of the wep. For the moment i use this site to help me : http://idum.f