TS2972 Cannot get home sharing and airplay to work over corporate wifi. Cisco WLC 5508 controllers. Home sharing and Airplay is turned on. Apple ID and account the same on each device. All software is at the latest version. Devices work individually.

All devices at latest software. Each device works individually ie. apple tv can play netflix and hulu videos, itunes works on both an iPad2 and a Pc with latest itunes version. Firewall disabled ports open. Devices on same vlan. Laptop can ping ipad and apple-tv, iPad can ping laptop and apple-tv. The deives just do not see each other ever. All cisco settings are set to recommended settings for home sharing to work. Any ideas?

I seem to have a similar problem. I have a Macbook and a PC, both running the current version of iTunes. On the APTV (also running the current software version), only my Macbook library shows up under "computers". Home Sharing is turned on for both and my Macbook library shows up under "Shared" on the PC, but the PC iTunes library doesn't show up on the Macbook or the APTV.
My question then is: How is it that my Macbook iTunes library can show up on the PC and on the APTV, but the PC iTunes library doesn't show up on either? If the PC can see the shared libraries, doesn't that mean it's on the same network? Along those same lines, "Shared" libraries do NOT show up on the Macbook. Again I ask, how is it that I can see the Macbook library on the PC, but the Macbook doesn't show any Shared libraries?
All of this worked just fine before the upgrade to iOS 5 by the way. I had no issues seeing any library on any devices and the APTV found both computers.
Please help. This is really annoying!

Similar Messages

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help

Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update

2 Cisco WLC 5508 controllers and software upgrade 7.6.130 + FUS 1.9

Hi
I have two WLC 5508 controllers that need 7.6.130 and FUS 1.9 installed. (Current version 7.3 and FUS 1.7)
Configuration: One controller is at Site A and the other controller is at Site B (two different states..)
They're configured so that if Site A goes down, Site A AP's will failover to Site B and vice versa ..
- What would be the recommended approach for upgrading the software to 7.6.130.0 (from 7.3) and also upgrading FUS 1.9 (from 1.7)?
My plan was to download 7.6.130.0 to both controllers and pre-download the software to all AP's (about 100 total between both sites) and then reboot the controllers at night at the same time? Or one before the other?
Step 2. Install FUS 1.9 to each controller.
I'm concerned over what might happen during the upgrade and AP failover etc..
Thanks

This is what I would do:
Upload v7.6.130.0 to all WLCs and then use the pre image download to push the image to all access points.
Dont reboot the wlc
Image swap in the access points so that v7.6.130.0 is primary
Move all access point to one of the WLCs (A)
Enable ap AAA authentication on the WLC that has no access points and the one you will work on first. This prevents access points from joining
Reboot the WLC (A)
Upload the FUS 1.9.0.0
Reboot WLC (A) this takes up to 45 minutes
When the WLC (A) comes back online, uncheck ap AAA authentication
Move access points from WLC (B) to WLC (A)
Enable ap AAA authentication on WLC (B)
Perform all the other task you did earlier on WLC (A)
That's it.
-Scott

Merging events in iPhoto with pictures named the same in each event? Will I lose the photo or will iPhoto rename the duplicate names?

I am trying to merge 2 events in iPhoto, but i notice that in the first event my photos are named by my camera as DSC_001, DSC_002, etc. But the same is true of the photos in the second event DSC_001, DSC_002, etc. If I merge these 2 events will I lose pictures that have the same photo/file name? Or will iPhoto change the name of DSC_001 from the second event when it merges event 1 & event 2? I am hesitant, I don't want to lose half of my pictures.

With iPhoto 9 and later when merging events the files stay in their original folder inside the library so there's no problem with files with the same file name. It's when you export same named files to the same folder on the hard drive that you may run into a problem.

How do I delete many photos at the same time, but not all? I have the free version - Adobe Photosho

I have the old free version Adobe Photoshop Album Starter Edition 3.0. How can you delete many photos at one time, but not delete everything in the album?

Hello, for your info; there is a Photoshop Album Starter Edition forum: http://forums.adobe.com/community/ps_album_starter

Trying to get home shaing working on apple tv using Cisco Access points and a Cisco WLC 5508 with 7.2.110 code. I can get devices working individually but they never see each other. I can ping the apple tv from my laptop and ipad.

Trying to get home sharing working on a corporate wireless network. Cisco wireless.
WLC5508 controller
Cisco 3502 access points
All apple devices on same WLAN - security WPA2-PSK
ITunes account up to date
All devices laterst software.
Can ping apll tv from laptop
can ping apple tv from ipad
Can ping ipad from laptop
can ping laptop from ipad.
Apple tv never sees any other device.
Any ideas?

Fascinating just reading about your setup. I have a WRT350N and have noticed that it will drop its speed, sometimes down to 1Mbps. It seems to do so at about the same time every day, but usually comes back to speed in about 5 minutes. In my experience, the Apple TV will disconnect if the speed falls this low. Try monitoring the Linksys with Netstumbler, Vistumbler, or just in the Windows Network utility.
Check the "lease obtained" and "lease expired" times for your router to see if that is when the network fails. I've just finished reading an angry thread over at the Linksys forum about the WRT330N where someone mentioned that the router wasn't renewing its lease.
"I cannot set it run off automatic DHCP from the WRT330N, the router will not assign it an IP every time the lease expires, causing me to have to manually set an IP on the Print server. That's annoying. Having the router drop IP's to individual machines after 12-48 hours...very annoying."
http://forums.linksys.com/linksys/board/message?board.id=Wireless_Routers&thread .id=67412
If that is the problem, then I would consider setting up a Static IP address for your Apple TV. You can do that through the user interface -> Settings -> Network -> Configure ... (Quite intuitive as you only have change IP address and the subsequent details remain the same.)
My router assigns IP Addresses in the ranges of 192.168.1.100 ->149. The idea here is to choose an address outside of that range but is not greater than 192.168.1.253 (and should not end in the number 1). You shouldn't have to change the linksys router as long as 50 clients are assigned in that range. You'll have to figure that out by accessing your router webpage at browser address 192.168.1.1 -> the default password is "admin" (without the quotes).
Good luck.

Hi there, I have a 2009 Macbook - running on OS X V.10.6.8... but I'm looking at upgrading the Operating System to V.10.10. Will your latest version of LIghtroom (the one I can currently get a free one month trial of from your site) work with Apple's late

Hi there, I have a 2009 Macbook - running on OS X V.10.6.8... but I'm looking at upgrading the Operating System to V.10.10. Will your latest version of LIghtroom (the one I can currently get a free one month trial of from your site) work with Apple's latest operating system - Yosemite V.10.10? Or will LR only work with V.10.7, 10.8 or 10.9?
Thanks, Seamus

Hey, problem solved. One of the drives was faulty. I erased the 2nd drive (which was showing up as the degraded raid slice), deleted the RAID set and restored the 2nd drive from a back-up disk image. After that, when I booted using 'option' I was presented with two boot disks but only one that worked. And when it did boot up only the reformatted disk was showing in Diskutil so I'm guessing the second one is knackered. With it still in place the server still wouldn't boot up from a full shutdown, but the moment it was removed it booted up no probs. Wakes up from sleep as well so it seems sorted.
So now just need to decide whether I'll bother with replacing the second drive or just use an external back-up. I have just bought a 1TB drive to back up to so will probably just go with that.
Btw, is there anyway I can test the drive I removed to see if can be saved?
Thanks for all your help. Your siamese twin comment was the push I need to erase the drive, I'd be holding off before that.
Warren

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version. Any ideas??

A few days ago my TV show and movie displays went whacky-the shows are no longer in alpha order, there are multiple listings of the same show, the pictures are random-including album covers. I downloaded latest version & no change. Any ideas??

ME TOO.
I think mine are all still in alphabetical order, but :
* movies I deleted from my library and told "hide this purchase in the cloud" are showing up again. If I try to play them, I get the "cannot find the file in its proper location, would you like to locate it" error message.
* for movies that have "iTunes Extras," the extras show up as a separate item, with another copy of the movie artwork. Most of these I believe I had DELETED the "iTunes Extras" anyway.
* Items are showing up multiple times.
* A few MUSIC ALBUMS are listed in my Movies section.
* Some movies (I believe ones that I deleted off my HD but are still in the cloud) are showing random album covers instead of their proper artwork.
* Just rented a movie, and it didn't show up anywhere in my library. It downloaded properly and completely, was in a suitably labeled folder in my iTunes/Media/Movies section, but didn't show up in any section of the library (or via a library search). Had to manually find it and tell it to open the file using iTunes.
Running the latest version, even checked for updates. No other changes made lately since the last round of apple software updates. This was wonky before the latest small update to iTunes - now it's even wonkier. And it is very, VERY effing annoying.

Why don't my photos appear as they do in iPhoto on my Apple Computer. Even though I specify to sync all Events, Faces, etc. the iPad 2 is missing Faces categories and the Events are in a different order.

Why don't my photos appear as they do in iPhoto on my Apple Computer. Even though I specify to sync all Events, Faces, etc. the iPad 2 is missing Faces categories and the Events are in a different order.

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

I have multiple devices backed up to the same computer each with different data. how do i keep them from syncing all data when i back up or transfer stuff from the computer to a device?

i have multiple devices backed up to the same computer each with different data. how do i keep them from syncing all data when i back up or transfer stuff from the computer to a device? one is an iphone 6 and the others are ipad mini first gens, each ipad has 64gb and the iphone has 128, need to keep the data seperate as they are not all mine

Itunes content and pics are NOT part of the backup that itunes performs.
Backing up, updating, and restoring iPad, iPod touch, and iPhone software
You should transfer any purchases from iphone regularly: File>Transfer Purchases , if they fail to be transferred when you sync.
You buy one and only one download. It is your responsibility to move/copy/backup your purchases.
You can try contacting itunes support and asking for an exception, but they are under no obligation to allow.
http://www.apple.com/support/itunes

I bought a new laptop and can access my itunes library but when i try to add purchased playlist songs to my ipod message appears asking if I'm ok with erasing all other songs on the ipod. Help needed.

I bought a new laptop and can access my itunes library but when i try to add purchased playlist songs to my ipod message appears asking if I'm ok with erasing all other songs on the ipod. How do I add purchased playlist to ipod without erasing existing ipod playlists?

cujoftw wrote:
wow ... I get a headache just trying to read what you just said. I went and read how to migrate my library and found that you can only migrate purchased media.
No, you can easily migrate your entire library from one working compter to another.
If you fail to backup or migrate your library and find yourself with nothing but a new empty computer and a device full of content iTunes is designed to only recover the iTunes purchased content, however third party tools can help recover everything if needed.
tt2

After clearing cash on mac applications won't lunch any more..I tried to delete apps like VLC player with app cleaner and again download and instal new but it's the same..goes for all apps that are not originally part of Yosemite. Please advise me?!

After clearing cash on my mac ( Go to folder: ~/Library/Caches and clear all, than to Library/Cashes and clear all again) applications won't lunch any more..I tried to delete apps like VLC player, firefox.. with app cleaner and again download and install the new one but it's the same..goes for all apps that are not originally part of Yosemite. I have done this cash clean up very often on Maverick without any problems. This time I done it again because I could not open my web site, the server has blocked me and I was trying everything including deleting cash from mac. Please advise me what to do..?!? Thanks in advance.

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

When i try to use hulu acc.i keep getting the same message / sorry we are unable to load the player please check your internet connection clear your browser cache and try again. i thought i did it right .

Question
when i try to use hulu acc.i keep getting the same message / sorry we are unable to load the player please check your internet connection clear your browser cache and

I found a solution! (at least, for my platform; Windows XP Home SP3, Firefox 4.0.1) =) Go to http://labs.adobe.com and download the Release Candidate 1 version of Adobe Flash 10.3.181.5. I swear, the Second I installed this, it worked INSTANTLY xD. Best of luck to you! (and anyone else who sees this =)
-Erik P.

I have reset my iPod because it had been locked out and I couldn't get back in, but it will only reset once it connects to a WiFi source. I cannot get onto my iPod to connect it to a WiFi source. How am I meant to reset/erase it?

I have reset my iPod because it had been locked out and I couldn't get back in, but it will only reset once it connects to a WiFi source. I cannot get onto my iPod to connect it to a WiFi source. How am I meant to reset/erase it?

Just what do you mean by " but it will only reset once it connects to a WiFi source."?
If it it says turn off FIndMyiPhone then:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

TS2972 Cannot get home sharing and airplay to work over corporate wifi. Cisco WLC 5508 controllers. Home sharing and Airplay is turned on. Apple ID and account the same on each device. All software is at the latest version. Devices work individually.

Similar Messages

Maybe you are looking for