TS3274 A rectangular or sqaure bubble appears when I use my ipad and I always have to tap it twice. Also when I tried to go to setting to restart it, it wont go down or up. What do I do?

A rectangular or sqaure bubble appears when I use my ipad and I always have to tap it twice. Also when I tried to go to setting to restart it, it wont go down or up. What do I do?

try pressing the home button 3 times.

Similar Messages

I have Ipad 2. When I touch an icon, a box forms around it and then I have to tap it twice to open. The box is messing up the touch screen and when I go into some apps they open, update then shut down.

I have an Ipad2. All of a sudden when I touch an app or select anything, a box forms around the icon or word and then I have to tap it twice to open it. So everything I do I have to touch 3 times. Also now when I open some of the apps, they open, update then close down. How do I get rid of the box.

You might have turned VoiceOver 'on'. See if triple-clicking the home button turns it off, and if it does then cahnge what Settings > General > Axxessibility > Triple-Click Hme is set to.
Otherwise your need to use the 'touch to select, double-tap to activate' process to go into Settings > General > Accessibility > VoiceOver and turn it off.
The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither

My screen on the Mac turn white when i turn it on, and i left the Mac on for a Hole Day to see if the screen would be fixed.. But i don't ! What can i do to fix it ?

My screen on the Mac turn white when i turn it on, and i left the Mac on for a Hole Day to see if the screen would be fixed.. But i don't ! What can i do to fix it ?

Is that all the information available? Nothing else happens? Sound or icons or anything? Try starting up while holding CMD V down and take pictures of the screen and upload them here

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

I am using Numbers app for the ipad and it has been working absolutely fine but now, when I want to email a spreadsheet as a PDF via the 'share and print' option, the file now doesn't appear as an attachment to the recipient. Any ideas please?

Hi mafiose15,
Thanks for visiting Apple Support Communities.
Restoring your iPod to factory settings is the best way to try and get it back to working order. You can use the instructions below to restore it:
How to restore iPod
Verify that you have an active Internet connection, because you may need to download new versions of the iTunes and iPod Software.
Download and install the latest version of iTunes if necessary.
Open iTunes. Connect your iPod to your computer using the USB or FireWire cable that came with your iPod.
After a few moments, your iPod will appear in the Source panel in iTunes.
Select your iPod in the Source panel. You will see information about your iPod appear in the Summary tab of the main iTunes window.
Click Restore.
If you are using a Mac, you will be asked to enter an administrator’s name and password.
A progress bar will appear on the computer screen, indicating that stage one of the restore process has begun. When this stage is done, iTunes will present one of two messages with instructions specific to the iPod model you are restoring.
Disconnect iPod and connect it to iPod Power Adapter (typically applies to older iPod models).
Leave iPod connected to computer to complete restore (typically applies newer iPod models).
During stage two of the restore process, the iPod displays an Apple logo as well as a progress bar at the bottom of the display. It is critical that the iPod remain connected to the computer or iPod power adapter during this stage.
Note: The progress bar may be difficult to see, because the backlight on the iPod display may be off.
After stage two of the restore process is complete, the iTunes Setup Assistant window will appear. It will ask you to name your iPod and choose your syncing preferences, as it did when you connected your iPod for the first time.
You can find the instructions in this article:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
All the best,
Jeremy

HT4972 i have the iphone 3gs and ive dropped it a few times. when i press the home and lock button, it will not turn on, but when i plug it in, it says in big font IOS 6 and when i slide it open it says connect to itunes or emergency call. it wont turn on

i have the iphone 3gs and ive dropped it a few times. when i press the home and lock button, it will not turn on, but when i plug it in, it says in big font IOS 6 and when i slide it open it says connect to itunes or emergency call. it wont turn on when i plug it in to my pc. tips?

roush12345 wrote:
i ... it wont turn on when i plug it in to my pc.
Place the Device into Recovery mode... All data / Content will be Erased.
http://support.apple.com/kb/HT1808
Note on Recovery Mode.
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup
http://support.apple.com/kb/ht1766
But... if the Device has been Modified... this will Not necessarily work

When I locate my iPad it sends me my email but the time it says in the email is like a 3 hour difference from the actual time I locate what do I do to have the proper time there

When I locate my iPad it sends me my email but the time it says in the email is like a 3 hour difference from the actual time I locate what do I do to have the proper time there
My time is correct but email time of location is wrong

Welcome to the Apple community TMOZINGO.
If you are unable to remember your password, security questions, don’t have access to your rescue address or are unable to reset your password for whatever reason, your only option is to contact AppleCare(or Apple ID Support), upon speaking to an operator you should explain that your problem is related to your Apple ID, this way you will not be charged for assistance, even if you don’t have an AppleCare plan.
The operator will take you through some steps you may have already tried, however they need to be sure they have exhausted all usual approaches before trying to reset your account, so you should try to be helpful and show patience with the procedure.
The operator will need to verify they are speaking to the account holder and may ask you some questions that only the account holder could know, and you will need to answer them if the process is to proceed.
Once the operator has verified your identity they will send a message through to your device which contains an alpha numeric code, which you will need to read back to them.
Once this has been completed they will send an email to your iCloud email address after a period of 24 hours, so you should check that mail is enabled in your devices iCloud settings.
Upon receipt of the email, use the reset link provided to reset your password, after which you should be able to make the adjustments to iCloud that you wish to do.

What is the best way to preserve my battery? Should I always have it connected to the charger when using it or should I use it and then recharge it?

What is the best way to preserve my MacBook Pro battery? Should I always have it connected to the charger when using it, or should I use it and then recharge it?

Don't worry about it:
http://macmost.com/dont-stress-about-batteries.html
If you want to condition it once a month, go ahead:
http://www.apple.com/batteries/notebooks.html

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

I have a FP-1600 and a FP-AO-200 module, 0-20 ma. When I use Field Point Explorer 3.0.1, I can not command any of the channel output current. The current remains in the lowest value 0.0035 A. What is the problem ?

I have a FP-1600 and a FP-AO-200 module, 0-20 ma. When I use Field Point Explorer 3.0.1, I can not command any of the channel output current. The current remains in the lowest value 0.0035 A. What is the problem ? The communications with the module are OK, because it shows when the current are open or closed.

Jorg,
I noticed that you claimed to be using the module in 0-20mA mode, yet the reading you are seeing is 3.5mA. This is the minimum value (with overranging) when the module is set to 4-20mA mode. My guess is that your module is defaulting back to 4-20mA mode, but your IAK file still thinks the module is in 0-20mA mode. You can verify this by using the find devices button in FieldPoint Explorer and then trying to write to the channel.
To fix this problem, you should use the snapshot feature to change the default power-up mode for that channel.
Regards,
Michael Shasteen
Applications Engineering
National Instruments
www.ni.com/ask
1-866-ASK-MY-NI

When I used my iPad the the volume go down

When I used my iPad the volume go down

You could press the keyboard down button (shown bellow), or hold it if its not going down. OR Hold the power button for about 8 seconds until it asks you if you want to reset (slide to unlock). OR switch the little switch located on the side of your ipad (shown Below)

I have a first gen iPad, and it will randomly go home from the Internet when I don't press any button. I have a wireless connection at home.

I have a first gen iPad, and it will randomly go home from the Internet when I don't press any button. I have a wireless connection at home. Is this a known bug? What can I do?

You maybe running low on memory since you are using the original iPad with iOS 5.1.1 and the iPad is crashing. This may help and it certainly won't hurt.
Quit all apps completely and reboot the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Do this before you launch Safari again. Go to Settings>Safari>Clear Cookies and Data. You don't have to clear the history.

Since upgrading my ipad and iphone software i am receiving an error message when sending emails, saying that the email address was rejected by the server.

Hi,
Since upgrading my ipad and iphone software i am receiving an error message when sending emails, saying that the email address was rejected by the server.
Please advise if this is a known problem, and what is the fix.
Many thanks
Mark

Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

I hit Forget Network and now cannot get back onto my wireless home network. All of my other computers and iphones are fine. How do I get the network back? It shows in my list of networks but when I use the password and try to join it says not connected.

See if the iPad will accept the password after you restart it. It's worth a try.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
You could also try a reset as well.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

When to use Apps adapter and DB adapter?

Hi All,
For invoking a PL/SQL API(either a custom or System API) in Oracle Applications from BPEL Process which is better to use?When to use Apps adapter and DB adapter?
Thanks,
ChitraDevi

As Sen correctly states for the DB adapter you have to set the context manually using the fun_global.apps_initilize or Fnd_Client_Info.SET_ORG_CONTEXT. This is usually done in a wrapper procedure.
I wouldn't say I'm an expert in this field as I have only used the APPS adapter for 11.5.10. I believe things have changed a bit for R12, but from my experience with APPS, things change very slow so although R12 is 10g App Server I'm sure the principles are the same.
Sen is also correct saying that base tables are not accessible via the APPS adapter. Basically the apps adapter is there to expose services, base tables are not services.
My recommendation would be different based on the experience of the developer(s). The APPS adapter simplifies the development but may not have the flexibility. The apps adapters sweet spot is those services that are difficult to integrate with, e.g. business services, xml gateway. If these are used heavily I would use the APPS adapter.
What I personally do, even if I'm not using APPS, if I'm connecting to the database I will implement a function, stored procedure, or AQ. It is a little more hassle during deployment, but it treats it more like a service and you are not impacted if the tables change. This is not an endorsement for you to go down this path because it does have a requirement to have PL/SQL knowledge, and it breaks the notion of service abstraction from the DB.
cheers
James

Safari dosn't open any webpage , when it reload page stuck and nver open, safari dosn't open any webpage , when it reload page stuck and nver open

safari dosn't open any webpage , when it reload page stuck and nver open, safari dosn't open any webpage , when it reload page stuck and nver open

I was fed up getting messages such as:
Safari can't open the page...
Safari can't connect to the server.. etc
I tried everything to get my Safari 3.1.1 to work on my Mac Pro computer (OS X 10.5.2) - then I found the solution for my Mac accidentally - it was due to Intego Net Barrier X4 that I had installed on my computer.
What I did was to upgrade to NetBarrier X5 and, after installation, I deleted the old intruder Stop List under NetBarroer's 'Antivandal' Stop List button. Now I can visit all the sites that previously did not open in Safari 3.1.1. However, I am not sure whether it was the upgrade or just deleting the intruder stop lists that did the trick.
So, before you upgrade to Intego NetBarrier X5, try and delete the stop lists under the antivandal button first in your existing NetBarrier X4. Highlight the intruder list (click on the first intruder at the top of the list and, while holding down the shift key, click on the last intruder on the list, thus selecting all of them), and then press the 'minus' button below the list. This will remove all the intruder items in the stop list. Restart your computer, open up Safari and now check if you can access sites previously inaccessible by Safari. If not, upgrade to NetBarrier X5 and it should work. Well at least in my case.

TS3274 A rectangular or sqaure bubble appears when I use my ipad and I always have to tap it twice. Also when I tried to go to setting to restart it, it wont go down or up. What do I do?

Similar Messages

Maybe you are looking for