TS3274 Keeps goin back to main screen

keep goin back to main screen when using eBay or Facebook

You may want to try this:
1. Backup iPad
2. Setup iPad as new (Settings>General>Reset>Erase all content and settings)
3. Install eBay and Facebook and test

Similar Messages

  • My Ipod Touch keeps going back to main screen and won't let me play games, read my ebook, etc.

    My IPOD Touch was working great until about 2 weeks ago.  Now when I try to play a game, read an ebook, etc. it automatically goes back to the screen showing all my apps and won't let me stay and use the app I have selected.  Is there anything I can do?

    Try a hard reset of the iPod.  To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
    B-rock

  • Unable to sync contacts, keep saying 'ipad already using contacts'.  When I open contacts app it opens for fraction of secs and goes back to main screen. any ideas?

    Unable to sync contacts, keep saying 'ipad already using contacts'.  When I open contacts app it opens for fraction of secs and goes back to main screen. any ideas?

    Sorry for double post, doesnt seem to be an edit option, this also works both ways.

  • My screen turns white and my functions lag on me for instence i try going to my ipod and it turns on but then turns right off going back to main screen. when i click on my settings it takes forever to open up, if opening at all.

    my screen turns white and my functions lag on me for instence i try going to my ipod and it turns on but then turns right off going back to main screen. when i click on my settings it takes forever to open up, if opening at all.

    Restore the phone --> http://support.apple.com/kb/HT1808
    If this does not resolve the problem you have a hardware problem.

  • How do I get back to main screen on itunes from ipad screen

    Have new ipad and stuck on ipad screen in itunes; don't know how to get back to main screen to get info and support icon

    Multitasking Gestures for iPad 2...
    • Use four or five fingers to pinch to the Home Screen
    • Swipe up to reveal the multitasking bar
    • Swipe left or right to switch between apps

  • After diconnecting my pkone from pc my applications don't run, I try to open but after 1 sec back to main screen, it always happen when disconnec from pc, I need back to the factory setings!!! anybody can help?! Thanks

    To load new music I need connect my phone to pc, after all when I disconnect phone my applications don't want run,non of them, after one sec back to main screen! Then I need back my phone to factory settings! Anybody know what is wrong?! Thanks

    papiciulo wrote:
    To load new music I need connect my phone to pc, after all when I disconnect phone my applications don't want run,non of them, after one sec back to main screen! Then I need back my phone to factory settings! Anybody know what is wrong?! Thanks
    Go to the iTunes store on the phone and "buy" any free app. This should fix the problem.

  • HT1430 iPad 3 keeps jumping back to home screen ...

    iPad 3 keeps jumping back to Home screen .

    Your apps are crashing. Try some basic troubleshooting steps and see if they help at all.
    Quit all apps completely and restart the iPad. Go to the home screen first by tapping the home button. Double tap the home button and the task bar will appear with all of your recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar. Restart the iPad.
    Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Or .... Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Start with those two things and see if the apps quit crashing - or see if the crashes are less frequent.

  • TS1702 My garage band app has crashed & keeps returning to the main screen when I try to open it... I've tried most of the trouble shooting options with the exception of re-installing the app, because I fear I will lose a number of recent projects I have

    My garage band app has crashed & keeps returning to the main screen when I try to open it... I've tried most of the trouble shooting chart (no updates available, tried restarting app, restarted device) all I have left is to re-install the app... My main fear is that if I do this I will lose a load of recent projects that are saved to the app that I've spent the last few days creating... Help...

    I have tried all those things I even updated the software to the new iOS system and it still did fix my problem.
    What happened is that my garage band looks like it will open then it shuts down.
    I have lot of important things on my garage band and I'm afraid that if I uninstall it deleting it then reinstalling it all my work on it will be gone and I can't have that happen.
    Everyday I am hoping that when i go to open the app that is will work but it doesn't it gets ready to turn on then it shuts off , the app doesn't even open all the way and turns off.
    I really hope I don't have to erase it.
    It'll say it's ,lading my songs then it shuts down .
    If I waited for the App Store to come up with an update for garage band should I wait till then to update my app so it doesn't get damaged . I don't want to erase it and all my data get erased . I figured if I wait for an update then my garage band will reset itself but won't delete my data. I'm not sure if that will help. Is there anything you or anyone else might know that can help me with this matter ?
    Thank you
    Simachyahi

  • Updated ipad2 to ios7 and my apps ask for Apple ID and password to open. It then goes right back to main screen

    I updated my ipad2 to ios7 and restored backup.  My apps now ask for my Apple ID and password. It then goes right back to main screen without opening. Help please

    - Try going to Setings>Store and sign out of the account and then sign back in.
    - Reset the iPod. Nothing will be lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears

  • Some games it just stops and goes back to main screen

    Has anyone ever had this happen?  There are a few games lately, Angry Birds, Hanging with Friends (haven't even played it yet, just got it) and they get to a certain point and the screen just goes blank then goes back to main screen.

    Try here:
    iOS: Troubleshooting applications purchased from the App Store

  • Plays one song and kicks back to main screen

    plays one sone a kicks back to main screen
    no music plays

    Have you tried resetting yur iPod.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    Does the music play OK in iTunes on the computer?

  • My ipad 1st generation keeps going back to home screen on when i open certain apps have tried rebooting and re-install but no difference

    My ipad 1st generation keeps going back to home screen on certain apps when i try to play games,but the same games play on my laptop.The games load up and when i press play it goes back to home screen.My software is 5.1.1,don't know processor speed or memory,storage is 5.0 GB.I have tried everything i know but can't get it to work any help would be appreciated.

    Hi This is because the Apps need more power now and have been updated the iPad 1 cannot run new Apps Upgrade if you can. Cheers Brian

  • Game response was sluggish.  Pushed button to go back to main screen. Screen would not respond. Got colored lines like a vertical roll, then screen went dark.  Screen will not turn on at all

    I was playing a game.  Game response was sluggish.  I pushed button to exit game and go back to main screen.  Took several times to get a response from iPad.  The response was a black screen with horizontal colored lines similar to horizontal roll on an old TV.  Screen went black and will not come back on.  Attempted sync, but iPad no longer shows up in iTunes.  Help!

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Mac on Snow Leopard keeps looping back to login screen

    Hi, Everyone,
    I have a MacBook, late 2008 It originally had 120 GB hard drive. Because I had less than 10 GB of space left, I replaced that with a 320 Western Digital Scorpio Blue HD (by myself, with an antistatic strap, etc). Everything seemed fine for a few days. Lots of space, immediate responsiveness with programmes, etc....nothing could be better. Then the system started getting sluggish, and I started getting spinning beach ball clicking between apps. Every time I ran verify disk permissions, there was a long list of permission repairs. Running repair disk never yielded a result other than everything being okay. I even created a flashdrive with the installation software. And I ran Onyx to try to clean things out.
    Then a few days ago, after restarting my computer (I may have done an update, but am not sure), my computer slowly booted up, came to the login screen, I entered my password, my desktop appeared and it "hung" for about 30 seconds, then the screen turned blue and went back to login screen. I made several attempts to login, but always got the same result.
    I used my bootable flashdrive (which I created with SuperDuper to contain the installation disk before I installed the new hard drive) to check and repair permissions. Each time I did that, I got the same permission errors. Again, nothing detected with disk verification/repair.
    When I start up the computer in safe mode, everything is fine except Safari kept crashing.
    Deleted and reinstalled safari to no avail. Still crashed. No problem in Firefox.
    In the regular mode (not safe mode), I reinstalled Flash, restarted, then back to the looping to the login screen.
    Still no problems in safe mode.
    At first I thought there would have been something with the new hard drive, but everything works fine in Safe Mode, so I'm wondering if there is something with Safari or Flash.
    I've updated ClamX and run a ClamX scan as well to check for viruses/Trojans.
    Please help.
    Help!

    Monique Mayer wrote:
    Okay, I reinstalled Safari under another admin account. No problems there, and --so far--no problems in my main account now. 
    What has happened is this.
    You installed a new hard drive, it came from the factory with some bad sectors on the drive.
    You laid your new OS X and data over these bad sectors and now having issues in various locations.
    The drive automatically maps off these bad sectors when it gets a read request from something your using, however it takes some time before it realizes such is the case, (thus the spinning beach ball as OS X is waiting) then it moves the data to a new sector and maps off the old one.
    Also as you use the computer, your writing data to new bad sectors on the drive, which haven't had their turn yet enough to be read and hopefully mapped off by the drive.  This is why your problem appears to be changing as it goes on.
    Look at your problem timeline:
    Then the system started getting sluggish, and I started getting spinning beach ball clicking between apps.
    This is likely a problem with the swap file which is stored on the hard drive when you run out of RAM memory with a lot of programs and files open.
    The swap file was stored across bad sectors, which the drive couldn't read well and thus you got the OS X spinning beach ball effect.
    This file location moves locations to free space on the drive, expands and contracts as you load things up to use.
    Then a few days ago, after restarting my computer (I may have done an update, but am not sure), my computer slowly booted up, came to the login screen, I entered my password, my desktop appeared and it "hung" for about 30 seconds, then the screen turned blue and went back to login screen. I made several attempts to login, but always got the same result.
    You  have done a update, which added more data to the drive and/or triggered a response from OS X data written on a bad sector which has hung your computer.
    When I start up the computer in safe mode, everything is fine except Safari kept crashing.
    Safe Mode disables  at boot software, video and other things so OS X is in a reduced state, the bad sectors are being avoided as their data is not being called.
    Safari is crashing because it too is corrupted, which your later post you reinstalled it and now it's fine, because it was written to a clear space on the drive without bad sectors issues.
    So your going about a "piece meal" restore method, next will be OS X, then all your programs, then a new user account because your User/Library will get screwed up etc., etc.
    Instead of this long pain, just follow my first post instructions and it will cure everything in one clean shot
    If the drive itself is bad and that's causing your bad sector problems, which you will soon find out and can get it replaced. The way your going it's going to keep giving you problems of various sorts for quite some time.
    I also tried the SMART check and it passed--no errors or bad sectors.
    That only provides a current bad sector count, which you say is zero, which is typical for a new drive as it hasn't read enough from the drive to find the bad sectors yet.
    In order to really find bad sectors on the drive, software would have to continously read data written to the entire drive over and over and over again so the drive will finally "trigger" the mapping off process. This would take days or even weeks to complete on large drive, so obviously the software isn't doing this.
    All drives come with a few bad sectors, the automatic mapping off process upon reads usually takes care of it, however you have more bad sectors than normal, which might have occured:
    1: Higher than normal amount of bad sectors from the factory.
    1: Bad drive from the factory causing bad sectors.
    2: Your moving the computer while the drive is in operation that the heads struck the platters causing the bad sectors.
    So a Zero Erase in Disk Utility, a fresh OS X install from the disk, fresh programs from original sources and vetted files from backup is the sure means to cure the whole mess. Bad sectors and data corruption.
    The DU Zero Erase proceedure does a pretty adequate job mapping off failing sectors, it takes hours to complete and not days.
    Bad sectors causes data corruption, so you really can't trust a previous clone or TimeMachine backup of this corrupted data to restore with (except vetted user files), some here have done that only to wonder why their problems returned after the zero erase was completed.
    If you restored the new drive with SuperD from the earlier drive, you also might have carried data corruption from that drive over too.
    So with a fresh install of everything, only thing that can be corrupted is your user files, which you restore from a clean backup and/or delete the ones causing problems.
    Take care and good luck.

  • How do I get back to main screen after looking at Downloads?

    This such a dumb question, but I've forgotten how to get back to the main screen after looking at downloads.

    Close the Download Tab or Window(If you are using some addon) or only change the tab:
    *[https://support.mozilla.org/en-US/kb/tabs-organize-websites-single-window Use tabs to organize lots of websites in a single window]
    About downloads:
    *[https://support.mozilla.org/en-US/kb/find-and-manage-downloaded-files Find and manage downloaded files]

Maybe you are looking for

  • Unable to pick up the file from Receive Location

    BizTalk is  unable to pick up the files from receive location. My admin console is working so slow. It is showing the problem of snap-in as follows: I have checked all my receive location and its masking,it is working fine. Actually it is working fin

  • What can I do to get my pictures back if my iPhoto doesn't want to open anymore?

    My iPhotos says I have to restart or shutdown my computer in order for it to reopen but when I do so it just keeps saying the same thing and now I have lost all my photos. What can I do to get them back?

  • How to tell which Indexes are not being used?

    We are a large development shop and have many customers. Our database design is very generic so that it works for all of our customers. Each night we use an SSIS ETL process to bring down large amounts of data from the iSeries into SQL. One particula

  • Printing dvd cases of mac themed templates

    Is there a way to save the preformatted theme that we have created when making a DVD - and print them for DVD cases? Like their "travel" theme, I used that for a movie and I'd like to be able to print that as the cover of a DVD case. I don't see anyw

  • DOCTYPE decleration in XML variable

    Hi I am using a local XML variable to build an XML document which I then use HTTP_Post to send to a partner company, and receive data back. My problem is that the DOCTYPE decleration is being stripped from the XML Variable, so the partner company do