TS3274 This is about screen orientation. The screen switches from vertical to horizontal by itself and no matter how I move the screen it doesn't work correctly. Very frustrating and don't know what to do.
J
Pick it up from the table, or bed, or other horizontal surface, where sensor will not read directions.
Similar Messages
-
Hii!!! My name is Alexis Delgado, I live in Venezuela, I got a Iphone 4s unlocked from a apple Store in USA december 2011. I made a update a few a days ago but my wifi is in gray, It doesn't work anymore. I'd like to know what can I do, please. my mail: [email protected]
Wi-Fi or Bluetooth grayed out
-
HT1349 when i turn on my mac pro it is very slow I don't know what happen what should i do?
Dear Sir
I have a problem with my note book (Mac pro). when I turn on my note book it is very slow. I have to waite for long time I don't know what happen. how should I do?
yours.If you have a non-retina MBP then the noise is part of tye OSX startup routine. It is checking the optical drive, and is nothing to be alarmed about.
Ciao. -
I'm trying to migrate my CS4 from my old Mac to my new one. When trying to open photoshop, i get a message saying "Licensing for this product has stopped working." And "Error: 150:30" I don't know what to do from here. Can someone help me? Thanks.
"Migrating" and/or "transferring" an application is not just asking for trouble but demanding it!
Always install an Adobe application from scratch, from the original media: CD or download. -
Hello
i'm really worried about my macbook pro, it's a 13'' retina 2012 model. After watching a late night movie last night i just closed the lid and went straight to bed as usual. To my surprise when i flipped open the lid this morning it only made the apple sound when turned on but didn't display anything. I tried switching it on and off several times but nothing changed. So i connected it to an external display and it worked fine. The funny thing is i never dropped it or spilled any liquid on it. Now i'm wondering what could be the cause and i'm hopping someone might be abble to explain this....Could it be the lcd screen, the video card or graphic processor or could it be the logic board?? Help.reseting the System Management Controller won't wipe my SSD drive will it?
No, but if you don't already have a backup, you must back up immediately, before you reset the SMC or do anything else. -
I need help!!!!!1
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
Exc in ev handl: TypeError: brw is undefined. Problem.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
I am not looking for a flame war - just to honestly get some advice from others on what other solid sound cards do you know that work properly when hooking up optical inputs and such and have a wide selection of inputs like the creative xfi elite pro's breakout box. M
Ok an update. I am very persistant - was up to 4am trying to fix this and trying to go through every possible problem. That right there shows there is some serious problems with creative's software and drivers. It is suppose to be easy, not require someone who has a master's degree in computer science 2 hours to sort through the problems. It would help if there was just a clear install guide telling exactly what needs to be done - or better yet - gasp - an installer than actually did all the complicated things for you. (Creative - see Installshield and an expert consultant - they can help you. It will be worth outsourcing your efforts to get a clean view on things. I suspect the people putting these driver packages at creatives have been there a while and have lost perspecti've). It is possible to get the soundcard working to a degree on Vista. Things to realize (the following works if an only if you only have one creative product installed. Otherwise it could screw up your system):?
Make am imagine of your Windows before and after this. Before because its easy to screw things up. After because once you get it working you will never want to do it again.<
Order or find on torrent the Official Vista Install CD [do not install it yet]. Download it. Its large - or order it and pay $9 for shipping and handling. (I think they are paying a courier to hand deli'ver it and also bring me coffee since it is so expensi've). You can not get this from creative's online site. (Imagine that).<
You must uninstall manually everything that creative installs at all before going to next step.<
You must uninstall everything that is nati've audio to your system (e.g. built on the motherboard).<
There must not be other audio drivers or audio software installed.<
After you uninstall all this - make sure you also uninstall creative's drivers, any other drivers of an audio nature, and make sure you check the box that says "delete drivers" when you uninstall.<
REBOOT<
Remove any other audio products from the system if possible. If built on a motherboard - see next step.<
Go into the BIOS. Disable anything that is audio related. Save your settings.<
REBOOT (again).<
Go delete every registry setting that is in your registry hi've using regedit that is creative xfi related. (This can take some time because there are many sub devices, and not everything says "creative" on it.)? Good luck.<
Delete everything in your program files under creative (remember to make sure you do this as an administrator with adminstrator permissions - thanks UAC).<
Delete everything in users/[every user name here that runs on your system]/appdata/local/creative<
Delete everything in users/[every user name here that runs on your system]/roaming/creative<
[another words - delete everything you can find creative related to the xfi] - again be careful if you have more than one creative product - you could screw your system.<
Install the Official Vista CD. Install ALL the software with ALL options. Click yes to a thousands OK yes I agree to install. Make sure you install this with administrati've privliedges.<
REBOOT (again).<
Register (why not - you did everything else)<
Update all the software that it says to update. This will take?a long time because all of the software that is on the CD is out of date. <
Alchemy will not update because you will have just updated a new set of drivers. So...<
REBOOT (again).<
Update all of software again that it says to update. (Creatives update manager works decently).<
Alchemy will finish installing.<
REBOOT (again).<
Do not use control/panel/sound to adjust things - its useless<
Make sure you use the Creative XFI Volume Panel (It is not the same as the Windows Volume). Great job naming this guys... Set what you want... the sound should be working.<
NOTE:? SPDIF seems to be not available in Games (Sorry folks who run PS3 Optical through this device - your SOL - thanks Creative). To do this you must use it in Entertainment mode - but wait... SPDIF is disable by default. You must go to the mixer and enable it.<
Now with this being said - many things still won't be functional. E.g. there is no dolby through SPDIF, etc. Many of the features that were sold with this card - simply are not available in the Vista drivers. Also note that to use the latest Alchemy that is on the web site (not through the updates) you have to hunt down and find beta drivers and install those - which automatically expire later on in the year. Good jobs guys with this too... not very smart creative.<
SO there you have it. I am sure I may have missed a step - so if someone trys this and has a question - I will try to help. This is ridiculous though that someone has to go through this. A Windows service pack for the OS is easier than this. Creative get a clue - - fire some of your developers and get some that can do a decent job programming the drivers after 2 years of alpha's and betas and release - and create a decent install product. I shudder to think of the poor souls who bought more than one creative product. Good luck sorting through the directory, shared files, registry hi'ves, etc. to get your software working. If I hadn't paid a large some of money for this piece of hardware I would have never spent so much time on it. I figure even at $30 an hour - its about $400 in effort just to figure the above out, search through all the registry, hunt through the multiple directories of Vista, download the software, find out which software you have to download, etc. I am posting it here so that the average person who spent a couple hundred bucks on this card doesn't spend hundreds of dollars of time trying to get it to work on Vista.
My advice for newbies to computers - go to best buy - spend $50 for install and tell them to get it all working perfectly in your PC. Best Buy is overpriced on everything now adays anyway... they wanted $40 for a hdmi to dvi converter when you can order one online for $5. They seem to be the 7- of Electronics.
Please creative - clean up your act.
Michael -
In working with icalendar, i inadvertantly lost all Friday entries after March 14th. My time machine was not hooked up. Hoped that the cloud might have this information.
You can check to see if they are still in iCloud by looking at your calendar on icloud.com. If they are, go to System Preferences>iCloud on your Mac, uncheck Calendars, choose Delete from Mac (they will still be in iCloud), restart your Mac, then go back and sign back in. If they aren't on icloud.com you might just give it some time to see if they reappear due to a server glitch.
-
My Yahoo email page suddenly lost the check box next to the emails to delete multiples or do any other action in multiples. I can't find any way to get it back. I have Firefox 22. yahoo email works fine on Safari.
Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you. -
I need to change this for all of our users and have created this script so far. Does anyone know how to Allow for all devices?
$mailboxes = Get-casMailbox -Filter {hasactivesyncdevicepartnership -eq $true -and -not displayname -like "CAS_{*"} | Get-Mailbox
foreach ($mailbox in $mailboxes)
#write-output $mailbox.UserPrincipalName
$devices = Get-MobileDevice -Mailbox $mailbox.UserPrincipalName
foreach ($device in $devices){
#write-output $device.deviceid
Set-CASMailbox -identity $mailbox.UserPrincipalName -ActiveSyncAllowedDeviceIDs @{Add=$device}
write-output $mailbox.UserPrincipalName
write-output $device.deviceidFor Exchange issues post in Exchange. You should also just try searching.
http://social.technet.microsoft.com/Forums/exchange/en-US/1ddc526d-f147-444c-a7bb-39d14415f9bc/clear-activesyncalloweddeviceids
This was first on list.
¯\_(ツ)_/¯ -
Help Please!
Call Apple, ask for Customer Relations, explain it to them and tell them you are upset about it. They will take care of you.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
MacOSG: An Apple User Group iTunes: MacOSG Podcast Follow us on Twitter: MacOSG -
My battery seems to have an x on it I tried resetting it but my charger doesnt seem to work now however from last night it all went black and everything shut down and my charger stopped working from then also my fan is going mad everytiime i turn the computer on.. can anyone help me?
Please use punctuation to end your sentences. It is very difficult to understand what you are saying.
Is the battery swelling or not?
Or are you using the word swell as an idom? -
I recently imported pictures from my camera to iphoto. I also synced my ipad. In less than 24 hours my photos are now missing from iphoto even after trying to sync my ipad again. These pictures are from a very special occasion and I did not even get time to edit. Someone help please
-Background-
My issue, which I resolved and may help you was the following:
I have an IPAD 3. I took over 5 GB of pictures on a third party camera. The car was full so I imported those pictures to my IPAD 3 and deleted them from the SD card. While on IOS 5.x, the photos on the IPAD were there under last imported.
Over the last few days, I upgraded to IOS 6. No issues.
Then, my family wanted to see the pictures from the trip. I went to the IPAD and could not find the photos. It listed 40 photos only. The last imported was there, but listed as empty. When I went into the settings>usage, it listed 5GB + of photos in the photos area. I was confused. I plugged my IPAD into ITUNES, first thinking I would get a backup asap (icloud was full after importing the photos). Then I though I would downgrade to IOS 5.
Also, itunes listed that I had 40 photos only, but 5GB of OTHER data. I was convinced the data was not lost. When I tried to browse the IPAD 3 using windows browser, the photos where NOT in the DCIM folder, so I was not able to simply "FIND" the photos and copy them to my PC.
-SOLUTION-
I downloaded third party software onto my PC called "http://www.i-funbox.com/" I fun box. I had no idea if this would work, but other forums with other issues called out similar products for iphone issues.
When I installed the program, which was free, and so far free of malware, I started to explore my IPAD file system.I found my photos, under IPAD>RAW file system>DCIM>100IMPRT.
-ROOT CAUSE-
I suspect when I upgraded to IOS 6, apple fails to register the IMPORT folder of photos as such, photos. So the file system in IOS looses sight of what is inside the last imported folder. Essentially removing them from applications such as "Photos". Why windows does not seem them, is beyond me. But the program I found did see them in raw format, and I was able to COPY them to my PC. Then I deleted them from the IPAD, because I had no other way of managing this folder in IPAD, and it was using a lot of space. -
i already charged it but nothing shows in the screen.. i did the long pressing both home button and sleep/wake button still no result.. please help me..
If it has a temperature warning, you may have over heated it. Keep it inside and at a cooler temperature exposure. Give it some time. Try holding down the home button and the power button at the same time until something happens.
Maybe you are looking for
-
How do I skip footer records in Data file through control file of sql*loade
hi, I am using sql*loader to load data from data file and i have written control file for it. How do i skip last '5' records of data file or the footer records to be skiped to read. For first '5' records to be skiped we can use "skip" to achieve it b
-
Hi all, I got one basic question regarding SSIS 2010 Package where source is Microsoft Excel 97-2005. I wanted to know How this package works in production where there is no Microsoft office or Excel driver installed. To check that there is excel dri
-
Hi everyone, Scenario : I want to securise a web service with SSL. I want to call this web service with Java standalone class (not servlet, JSP,...). Here is what I've done : 1) I created a web service with "Secure SOAP" option. 2) I created a <u>Sta
-
DQXI USA Regulatory Address Cleanse - Multiline Address Parse Drops Lines
I'm trying to standardize an address (using DQXI USA Regulatory Address Cleanse) that contain address and building/room data. The standardization process seems to drop important pieces of the address that are needed for delivery. Input Data FirstName
-
Gow can I acsess an Object?
I have an application, which have to build buttons dynamically. I get an Array with button objects as an JMS object Message. Do add the buttons to the GUI I do something like: for ( i = 0; i < array.lenght; i++) { Button button = (button) objectMessa