TS3276 how do i rebuild the database when starting up Mail version 5.2?

Having real problems with Mail. Sent a large attachment earlier today which is now in a 'Recovered Message' folder. Since then I can't send or receive any emails from any account, ie BT Yahoo, via Mail, although I can do this from the internet at BT Yahoo. A friend suggested 'rebuilding the database' by holding down certain keys at launch of Mail. Will this work and if so what are the keys to hold down?
Many thanks

You can rebuild your mailbox by selecting the mailbox and then selecting the menu item "Mailbox >> Rebuild".
You can optimize your mailbox by "vacuuming" the databases too (huge improvement). Open Termina.app and use:
*/usr/bin/sqlite3 ~/Library/Mail/Envelope\ Index vacuum*
Personally, I do it with AppleScript:
*tell application "System Events"*
*set mailIsRunning to (name of processes) contains "Mail"*
*end tell*
*if mailIsRunning then tell application "Mail" to quit*
*do shell script "/usr/bin/sqlite3 ~/Library/Mail/'Envelope Index' vacuum"*
*if mailIsRunning then tell application "Mail" to activate*
Message was edited by: J D McIninch

Similar Messages

How do I eliminate the message when starting up PC - Apple Sync Notifier.exe – Entry Point Not Found – The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Getting the massage when starting up PC - Apple Sync Notifier.exe - Entry Point Not Found - The procedure entry point sqlite_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. How do I eliminate this message?

I'd first try uninstalling and reinstalling your MobileMe control panel, dc. Does that clear the message up?

TS3276 how do you adjust the line spacing in incoming mail messages?

Some of my mail messages are so compressed they are unreadable. Does anyone know if this can be adjusted? If so, how????????
Thanks!

Leading is the spacing between lines. In the Print module, when you scroll to the Type feature, make sure you have the extended the Type arrow (shown below), as well as the character menu (also shown below).
When you have that extended, you will see the leading slider, as well as auto leading button. please adjust those as you wish.
I hope this helps,
thank you
Janelle

I have iphoto 5.0.4 My computer crashed while trying to quit iphoto and when I rebooted my albums and organized folders had all disapeared. All my photos are still there but how do I retrieve my folders and albums? I tried rebuilding the database

My computer crashed while quiting iphoto. When I rebooted my albums and folders had disappeared. How do I get them back? I tried rebuilding the database to no avail. I am using iphoto 5...
Thank you community!

Most simple solution: restore from your back up.
Other than that, try Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

How to deal with the situation when the database change into ms-sqlserver ?

Hi,dear all,
How to deal with the situation when the database change into ms-sqlserver or other database?
Now, i want to build a j2ee project with ORACLE ADF bc,but this project may be used in several diffrent databases for example oracle db,ms db,mysql and so on.however,if i have developer this project in jdeveloper and this project connection was config as a oracle database,and then,can this project be reused for other databases espasially including the model codes? if yes,how should i do?
all who know how to resolve this,tell me pls,thanks.
bruce Li,
China
Message was edited by:
user526724

Hi Paulbin,
Do you want to supply a function-pointer to a DLL so it can call[back] your VI? Here's how it can be done with .NET, though, that solution requires a C compiler. A single "VI_to_function-reference" utility could handle all cases where the callback passes no parameters. Maybe someday somebody will share that dll.
Did you know that LabVIEW can use Events for some COM-signals change? See pic. (Note: DTR is not listed - - )
Another question is another function's prototype is WORD SetTestType(WORD comHandle, bool type1, bool type2, bool type3), I tried to use a boolean control and a Boolean to (0,1) node in labVIEW to pass parameters to CLF, I config the bool input value as U8(according to C++ bool type) and U32(according to WIN32 BOOL type), it dose not help, when I execute the VI, LabVIEW will be disappeare, it seems to be closed, I must start it again.
Could someone has similar experience on this points?
It's easy to crash LabVIEW misusing CLF - maybe there's another reason for the crash besides bool mis-match(?) Do you know which "Calling convention" is required? What type is comHandle? (where does comHandle come from?)
Cheers!
Message Edited by tbd on 03-23-2007 09:34 PM
Message Edited by tbd on 03-23-2007 09:35 PM
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare)
Attachments:
evt.jpg ‏7 KB

ITunes forgets my CD files...how do I rebuild tune database? - Revisited

Hi:
I tried follwoing your advice.
I can do the Ctrl-A to select all songs in the iTunes libary.
I can right-click and select Delete,
but when I do, I do not get the 3 options that you mentioned
(Cancel, Keep Files, and Move To Recycle Bin)
I get a dialog box stating:
Are you sure you want to remove the selcted songs from your iTunes library?
These songs will also be remove from any iPod or iPhone which synchronizes with your iTunes library.
Why am I not getting the options you stated above ?
I have seen you oprions on a Mac at best Buy, but I am running an HP laptop under Vista Home Premium.
Then has a Remove or Cancel button to be clicked.
If I follow through with the above, will it wipe out my music library ?
How do I go about rebuilding the databse ?
Thank you
DaleB
HP dv6500z laptop Windows Vista
==========================================================================
Toocan
Posts: 54
From: Gauteng, South Africa
Registered: Jul 23, 2008
Re: iTunes forgets my CD files...how do I rebuild tune database?
Posted: Aug 17, 2008 10:27 PM in response to: DaleB Reply Email
Sorry DaleB, I have redone my library so many times, I forgot about this prompt. Just click 'yes'/'remove' to that question.
Reloading the library will only make your iPod resync again, thats all.
Intel Windows XP Pro P4, 3.4GHz, 3GB RAM, XP SP3 - iPod 80GB Classic
===========================================================================
DaleB
Posts: 145
Registered: Jan 18, 2006
Re: iTunes forgets my CD files...how do I rebuild tune database?
Posted: Aug 18, 2008 4:02 AM in response to: Toocan Reply Email
Hi:
You tell me to click "Yes" / "Remove" when prompted by iTunes with
"Are you sure you want to remove the selcted songs from your iTunes library?"
but when I do, I do not get the 3 options that you mentioned
(Cancel, Keep Files, and Move To Recycle Bin) ?
Thank you
DaleB
==============================================================================
DaleB
Posts: 145
Registered: Jan 18, 2006
Re: iTunes forgets my CD files...how do I rebuild tune database?
Posted: Aug 18, 2008 4:13 AM in response to: Toocan Reply Email
Hi:
A related issue.
I made a copy (backup ?) of the Music folder in Windows Vista Home Premium 32-bit OS, to my Desktop. If something corrupts the Music in iTunes, will this be a "good enough" backup to be able to restore the music by moving it back into the Music folder, or will soemthing be missing ?
Thanx !
DaleB
==============================================================================

Hi:
I did not move them arounsd outsice of iTunes.
I copied & pasetd them in iTunes, but in some cases, they became subfolders.
e.g., I may have a main folder in iTunes called "Rolling Stones", and subfolder iteled after their Greatest Hits album "Hot Rocks". Initially,
Hot Rocks was a folder at the same level as Rolling Stones. Thenm I create a subfolder within Rollng Stones and then copied and pasted all of the MP3 files from the main folder (Hot Rocks) into the subfolder (Hot Rocks), and then deleted the main folder (Hot Rocks). But, iTunes now tells me it can find the songs. The Apple guy at best Buy showed me how to delete the current database without deleting the actual tunes, and then rebuild the database, all in a few mouse clicks. But, this was on a Mac...I do not know if iTunes for Windows has the same menu features as the Mac version. I just forgot the steps that he went through.
DaleB

SQL error in the database when accessing a table.

Hi,
I got below error at production server. Please suggest how to reslove this error.
 
 
 
Runtime Errors DBIF_RSQL_SQL_ERROR
 
Exception CX_SY_OPEN_SQL_DB
 
Date and Time 02.01.2011 15:55:06
 
 
 
 
 
Short text
 
SQL error in the database when accessing a table.
 
 
 
How to correct the error
 
Database error text........: "[10054] TCP Provider: An existing connection was
 
forcibly closed by the remote host.
 
[10054] Communication link failure"
 
Internal call code.........: "[RSQL/INSR/SWFCNTBUF ]"
 
Please check the entries in the system log (Transaction SM21).
 
 
If the error occures in a non-modified SAP program, you may be able to
 
find an interim solution in an SAP Note.
 
If you have access to SAP Notes, carry out a search with the following
 
keywords:
 
 
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
 
"CL_SWF_CNT_FACTORY_SHMEM======CP" or "CL_SWF_CNT_FACTORY_SHMEM======CM001"
 
| "ADD_INSTANCE"
 
 
 
Information on where terminated
 
Termination occurred in the ABAP program "CL_SWF_CNT_FACTORY_SHMEM======CP" -
 
in "ADD_INSTANCE".
 
The main program was "SAPMSSY1 ".
 
 
In the source code you have the termination point in line 16
 
of the (Include) program "CL_SWF_CNT_FACTORY_SHMEM======CM001".
 
The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
 
procedure "ADD_INSTANCE" "(METHOD)", but it was neither handled locally nor
 
declared
 
in the RAISING clause of its signature.
 
 
The procedure is in program "CL_SWF_CNT_FACTORY_SHMEM======CP "; its source
 
code begins in line
 
1 of the (Include program "CL_SWF_CNT_FACTORY_SHMEM======CM001 ".
 
 
 
 
Source Code Extract
 
 
Line
SourceCde
 
 
1
METHOD add_instance .
 
2
 
3
data: ls_id type swfcntbuf.
 
4
 
5
check buffer method - store in local buffer if necessary
 
6
retcode = cl_swf_cnt_factory=>add_instance( ibf_por = ibf_por instance = instance ).
 
7
 
8
CHECK m_buffer_method EQ mc_buffer_shared.
 
9
 
10
append key to list of tasks to add stored in database table SWFCNTBUF
 
11
will be evaluated by build process for shared memory area (UPDATE_BUFFER method)
 
12
 
13
ls_id-mandt = sy-mandt.
 
14
ls_id-id = ibf_por.
 
15
 
>>>>>
INSERT swfcntbuf CONNECTION r/3*wfcontainer
 
17
FROM ls_id.
 
18
 
19
IF sy-subrc EQ 0.
 
20
Commit seems to be necessary always, even if INSERT has failed, to get rid of
 
21
database locks
 
22
COMMIT CONNECTION r/3*wfcontainer.
 
23
ENDIF.
 
24
 
25
ENDMETHOD.
 

duplicate here SQL error in the database when accessing a table.
Do not post the same question in more than on forum.

DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table

Hi Gurus,
Im getting DBIF_RSQL_SQL_ERROR: SQL error in the database when accessing a table error while I was importing support pack in the system. This is ERP 6.0 with EHP4 with MS SQL in back ground and I was applying the BASIS SP 04. It was in the TEST scenario and in the SPDD_SPAU_CHECK phase it threw the error.
Short text
    SQL error in the database when accessing a table.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
How to correct the error
    Database error text........: "[601] Could not continue scan with NOLOCK due to
     data movement."
    Internal call code.........: "[RSQL/FTCH/E071 ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "SAPLSVRT" or "LSVRTU01"
    "TR_LAST_IMPORT_OF_OBJECT"
SPAM is ending with the above short dump. I have checked the space availability and it is OK.
Kindly help.
Renju Aravind.

Hi,
this error is very often seen in case of a database corruptions. Please follow note 142731 and perform a complete database check. Send the results when they show errors.
Best regards
Clas

Iphoto won't quit, won't import photos, stalls while editing photos despite rebuilding the database

I have mountain lion and the newest version of iphoto. It won't quit unless I force quit it, it won't import photos, it won't let me edit photos without freezing up. I have tried rebuilding the database and repairing permissions without success

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If it freezes also try this:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
or with Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
Data/Library/Caches/com.apple.iPhoto folder
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
NOTE 2: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
If the new library doesn't freeze or act like your current library then your current library is the culprit.
In that case Apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Since only one option can be run at a time start with Option #3, followed by #4 and then #1 as needed.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

How do I rebuild the 'open with' contextual menus?

I'm running the latest version of OSX 10 Mountain Lion… the contextual menu 'open with' section shows multiple instances of the same programs, sometimes 6 or 8 of them. How can I rebuild the menu so that it shows only one copy of each program?

Rebuild LaunchServices Database
Open the Terminal application in your Utilities folder. At the prompt paste in the following command in its entirety:
find /System/Library/Frameworks -type f -name "lsregister" -exec {} -kill -seed -r \;
Press RETURN. Wait for the Terminal prompt to return after which you can quit the Terminal.

Getting error "SQL error in the database when accessing a table."

Hi All,
We are getting Dump Error SQL error in the database when accessing a table for the batch job EISSD/REQUISITION 14 / which includes program AQ20FD==========A2============. Please reply. The Dump error details are as follows
Short text
    SQL error in the database when accessing a table.
How to correct the error
    Database error text........: "ORA-01555: snapshot too old: rollback segment
     number 21 with name "_SYSSMU21$" too small"
    Internal call code.........: "[RSQL/FTCH/VBRK ]"
    Please check the entries in the system log (Transaction SM21).
Thanks
Padmakar Kudtarkar
Edited by: Rob Burbank on May 19, 2011 9:38 AM

The query where we are getting error in Standard program AQ20FD==========A2============ for Job
EISSD/REQUISITION 14 / is as follows:
select VBRKBUKRS VBRKFKART VBRKFKDAT VBRKFKTYP VBRKGJAHR VBRKKUNAG VBRKKUNRG VBRKKURRF VBRKVBELN VBRKWAERK VBRP~AUBEL
       VBRPAUPOS VBRPFKIMG VBRPKVGR2 VBRPKZWI1 VBRPMATNR VBRPMWSBP VBRPNETWR VBRPPSTYV VBRPVBELN VBRPVGBEL VBRP~VGPOS
       VBRPVKBUR VBRPVKGRP VBRPVRKME VBRPWAVWR
into (VBRK-BUKRS , VBRK-FKART , VBRK-FKDAT , VBRK-FKTYP , VBRK-GJAHR , VBRK-KUNAG , VBRK-KUNRG , VBRK-KURRF , VBRK-VBELN
     , VBRK-WAERK , VBRP-AUBEL , VBRP-AUPOS , VBRP-FKIMG , VBRP-KVGR2 , VBRP-KZWI1 , VBRP-MATNR , VBRP-MWSBP , VBRP-NETWR
     , VBRP-PSTYV , VBRP-VBELN , VBRP-VGBEL , VBRP-VGPOS , VBRP-VKBUR , VBRP-VKGRP , VBRP-VRKME , VBRP-WAVWR )
from ( VBRK
       inner join VBRP
       on VBRPVBELN = VBRKVBELN )
       where VBRK~BUKRS in SP$00004
         and VBRK~FKDAT in SP$00001
         and VBRK~KUNAG in SP$00002
         and VBRK~VBELN in SP$00006
         and VBRP~MATNR in SP$00003.
%dbacc = %dbacc - 1.
if %dbacc = 0.
    stop.
endif.
check SP$00004.
check SP$00001.
check SP$00002.
check SP$00006.
check SP$00003.
add 1 to %count-VBRK.
%linr-VBRK = '01'.
extract %fg01.
%ext-VBRP01 = 'X'.
    extract %fgwrVBRP01.
endselect.

Root cause of "SQL error in the database when accessing a table. "

Dear experts,
I meet this dump "SQL error in the database when accessing a table" when executing a sql.
Sql:
    SELECT sesssessno poscrm_serplan_id poscrm_ser_h_id poscrm_ser_i_id
           possolution_id sessbundle_id sessdbid sessinstno pos~crm_ordered_prod
           sessdbid sessinstno
      INTO CORRESPONDING FIELDS OF TABLE et_sess_list
      FROM dsvassessadmin AS sess JOIN service_posn_sm AS pos
        ON possession_id     = sesssessno
      FOR ALL ENTRIES IN lt_contractno
      WHERE sess~contractno = lt_contractno-contract_no
       AND sess~status IN lt_status_range
       AND bundle_id IN lt_bundle_id
       AND pos~solution_id GT 0
This sql works well in dev system SD7, however, it causes dump in another dev system "SMV".
Can anyone give me any ideas?
Thanks

Hi Jovito,
This is info from ST22
Short text
    SQL error in the database when accessing a table.
What can you do?
    Note which actions and input led to the error.
    For further help in handling the problem, contact your SAP administrator
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
How to correct the error
    Database error text........: "SQL0101N The statement is too long or too
     complex. SQLSTATE=54001"    Internal call code.........: "[RSQL/OPEN/DSVASSESSADMIN ]"
    Please check the entries in the system log (Transaction SM21).
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
    "CL_AGS_SERVICE_SERV===========CP" or "CL_AGS_SERVICE_SERV===========CM018"
    "GET_OVS_SESSION_LIST"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    The exception must either be prevented, caught within proedure
    "GET_OVS_SESSION_LIST" "(METHOD)", or its possible occurrence must be declared
     in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
It seems that after translation the native sql is too long. But I think this can be solved.

How can i open the database by force?

my database is crash because the machine power problem, when i restart again, oracle error say the control file is older than the system tablespace file,
so i have to create the controlfile again, then , the database need recover , but my database is not archived, it can't take a media recoer , what should i do?
how can i open the database even lost some data?

Pallofa,
Try open img file using some software.
You need a software to mount the img file.
http://techie-buzz.com/how-to/mount-iso-files-as-a-virtual-cd-dvd-drive.html
If thinstead of using an img file, just use this command.
repair-bde e: d: -rp xxxx-xxxxx-xxxxxx-xxxxx -f -lf c:\log.txt
where d is the portable disk whereyou want the data and d drive should at least
equal to e drive.
Where xxxx-xxxx-xxxxx is the 48 digit recovery password.
-lf will generate a log file and point to a certain location, here I have pointed to c drive.
After repair-bde is completed, run chkdsk /f on D drive, then try to access your data.
Manoj Sehgal

How can I know the database is using Cost Based or Rule Based?

Hi all expertise,
How can I know the database is using Cost Based or Rule Based?
If cost based it is using, what methods are need to use to minimize the cost when database is running? And which tables I can see the performance of the database?
Thanks
Amy

how to see database setting ?
use this
SQL> sho parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 1
optimizer_features_enable string 9.2.0
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_max_permutations integer 2000
optimizer_mode string CHOOSE
choose means if table statistics is available then it will use cost
else
use rule based optimizer
for seeing performnace of table use
set autotrace on
and run your query
if it doen't show cost.it means it use rule based
for using cost based
u will calculate table statistics
9i
dbms_stats.gather_table_stats('owner','table');
8i
analyze table <table_name> compute statistics;
hope it will help you
kuljeet pal singh

DBIF_RSQL_SQL_ERROR with SQL error in the database when accessing a table.

dear all,
i have done a system copy from production server into quality server. quality was scrapped and freshly installed with SAP then used the DB flush method to carry out the system copy. i had to change the DBS_ORA_SCHEMA in environment variables to SAP<SOURCE SID> from SAPSR3. the sap version is ECC6.0,DB is ORACLE10.2 on WIN NT.
after MMC opened, i get "SQL error in the database when accessing a table" error is coming. in SM21, I am getting "Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000 )
Database error 8103 at SEL access to table TBTCO
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
Database error 8103 at FET access to table TBTCP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
> Short dump "081018 130339 sibqty_Q TY_00 " generated
Transaction Canceled 00 671 ( DBIF_RSQL_SQL_ERROR 20081018130339sibqty_QTY_00 SAPSYS 000
Delete session 001 after error 023
Database error 8103 at DEL access to table TMSALOGAR
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Database error 8103 at FET access to table SNAP
Run-time error "DBIF_RSQL_SQL_ERROR" occurred
> Short dump "081018 130432 sibqty_Q TY_00 " generated
Transaction Canceled SY 002 ( SQL error in the database when accessing a table. )
Database error 8103 at FET access to table TSP02"
please find the st22 DUMP:
ow to correct the error |
Database error text........: "ORA-08103: object no longer exists"
Internal call code.........: "[RSQL/READ/TBTCO ]"
Please check the entries in the system log (Transaction SM21).
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
"SAPMSSY2" or "SAPMSSY2"
"INITIATE_JOB_START"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
The exception must either be prevented, caught within proedure
"INITIATE_JOB_START" "(FORM)", or its possible occurrence must be declared in
the
RAISING clause of the procedure.
|
please do me this favor if you know to avoid this problem..
thanks a lot..

Hello Anuj,
This is because the COUNT(*) is returning a value which is longer than the INT4 data type it is expecting. If you restrict the selection by introducing a WHERE clause, then you won't get the dump:
DATA: dyn_from TYPE string,
 dyn_where TYPE string,
 gx_sql_err TYPE REF TO cx_sy_open_sql_error,
 gv_text TYPE string.
dyn_from = `DD01L INNER JOIN DD02L ON DD02L~AS4LOCAL = DD01L~AS4LOCAL AND DD02L~AS4VERS = DD01L~AS4VERS`.
dyn_where = `DOMNAME LIKE 'Z%'`.
TRY .
 SELECT COUNT(*) FROM (dyn_from) WHERE (dyn_where).
 WRITE: / sy-dbcnt NO-GROUPING.
CATCH: cx_sy_open_sql_db INTO gx_sql_err,
 cx_sy_dynamic_osql_semantics INTO gx_sql_err,
 cx_sy_dynamic_osql_syntax INTO gx_sql_err.
ENDTRY.
IF gx_sql_err IS BOUND.
gv_text = gx_sql_err->get_text( ).
WRITE: / gv_text.
ENDIF.
BR,
Suhas

TS3276 how do i rebuild the database when starting up Mail version 5.2?

Similar Messages

Maybe you are looking for