TS3276 Sound works fine on all programs, but has suddenly stopped on Apple Mail. No "submarine" sound when I send or receive email. I checked the settings in "Preferences" in Apple Mail and it is set to "submarine" as the sound. Any help?
Sound works fine on all programs, but has suddenly stopped on Apple Mail. No "submarine" sound when I send or receive email. I checked the settings in "Preferences" in Apple Mail and it is set to "submarine" as the sound. Any help?
deleted previously imported key chain originated from the previous system (why doesn't apple provide a migration for my key chain?). after the deletion mail can receive and send again and dreamweaver starts without hanging.
Similar Messages
-
Why can't I get alert tones when I send or receive email. I checked Sounds and volumes are at max.
Why can't I get alert tones when I send or receive email. I checked Sounds and volumes are at max.
Have you got notifications muted ? Only notifications (including games) get muted, so the iPod and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you can mute notifications by the switch on the right hand side of the iPad, or via the taskbar : double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar. The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
My iPad makes no sound when I send or receive email even though sound is on
When I send or receive emails on my ipad, I do not get a sound at all even though I have set it to swoosh and ding. What else should I be setting?
Have you got notifications muted ? Only notifications (including games) get muted, so the Music and Videos apps, and headphones, still get sound.
Depending on what you've got Settings > General > Use Side Switch To set to (mute or rotation lock), then you either mute notifications by the switch on the right hand side of the iPad above the volume switch, or via the taskbar in iOS 6 (double-click the home button; slide from the left; and it's the icon far left; press home again to exit the taskbar), Control Centre in iOS 7 (swipe up from the bottom edge of the screen and it's the right-most of the line of 5 icons) . The function that isn't on the side switch is set via the taskbar instead : http://support.apple.com/kb/HT4085 -
I run Windows 7 on a Dell Laptop with i5 processor - SRS premium sound that works well except when using Firefox browser. Example of problem - listening to CNN news on TunedIn online Radio - volume cranked all the way up provides about 20% of the audio volume when listening to the same on Google Chrome.
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you. -
App working fine on all emulators but not on real devices
hi, i made a 3d scene using height map it worked perfect on sun emulator but did not work on real device Nokia 6280 and instead said nullpointer exception there is no err with jar file or any other small error.
When i run that same application on sonyerricson emulator then it did not show anything at all just blank screen on all phone of sony erricson
plz help me regarding this issue
thanks
byehi,
can u describe more detail about your application.I think you are using any API that is not implemented on real device. -
Do the settings under Preferences Project SWF SIze and Quality have any impact on HTML5 output?
I can see how Audio quality and Jpeg quality could be affected by making changes here, but I'm not sure if it actually makes any changes in the HTML5 version. Can anyone shed some light?
Hi Noel,
Me again, sorry for that.
The default quality for slides is Low (8-bit), to have the smallest filesize for output possible. But in a lot of situations this quality is too low, after all this means that you only have 256 colors (like in GIF-images) which is too low for most photographic images and certainly also for images with (partial) transparency. And as you perhaps already saw in the forums, some fonts do gain a lot if you increase slide quality.
To increase slide quality you have two options:
either you check each slide and change the quality to High or Optimized if necessary, and only then;
or you just override the slide quality at publishing and in that case you uncheck the mentioned option 'Retain slide quality', and set all slides to High
The second option is the easiest one but means that all slides will have High = 24-bit = 16777216 colors available. This will result in a larger filesize than option 1 where you only increase the quality for the slides that need it. If you choose option 1 you do not uncheck 'Retain slide quality'.
Never used it, but for a quick publish with lowest quality you could also use option 2 if you have changed some slides to higher quality, to have all slides again at the low quality.
Lilybiri -
My HP C6300 All in one has suddenly stopped working
Both Printer and Advent laptop tell me that they are both connected to my Netgear router but nothing happens. When I click on the printer logo all I recieve is an 'Error' message! I have tried everything on the support site without success. I am using windows vista. Help!!
Start > Control Panel > Printers. Delete all instances of the printer.
1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
2. Click >> Start >> Control panel >> Printers.
3. Click the Add a printer
4. Select Local printer
5. Select Create a new port and select Standard TCP/IP Port and click Next button.
6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
8. If you are asked, use the currently installed driver.
9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
10. You may be asked to share the printer. Choose NO.
11. The Print Test Page box appears. Go ahead and print it.
12. Click Finish.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
My wireless printer is working for my husband's iPad mini and my hp laptop. My iPad 2 suddenly stopped printing yesterday - where can I check printer settings on my iPad 2?
To delete, tap "Edit" (tap to enlarge image)
-
Samson C01U worked fine on G4 PPC but has extensive digital hiss on Imac
I love this microphone, and used to use it on a G4 PPC where it worked absolutely fine. The only noise it picked up was from the noisy computer. Now I have a quiet Imac and the Mic pics up a lot of digital noise. It isn't amplifying anything in the room. For instance if I turn the input level all the way down in Apple MIDI Setup all the way down it still comes through. Any ideas how to remedy this? Is this a power to USB port issue?
Any ideas? Thanks!Dig thru the links in this Google Search: [+using a Samson C01U with an intel imac|http://www.google.com/custom?hl=en&client=pub-6263300333013957&cof=FORID%3A1%3B GL%3A1%3BLBGC%3A336699%3BLC%3A%230000ff%3BVLC%3A%23663399%3BGFNT%3A%230000ff%3BG IMP%3A%230000ff%3BDIV%3A%23336699%3B&ie=ISO-8859-1&oe=ISO-8859-1&q=using+a+Samso n+C01U+with+an+intelimac&btnG=Search]
-
I can not connect to iTunes from ipad
This what Apple's iTunes specific error codes support article says about that particular error.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network. -
Hello, my father recently passed (using his ID) and I took over the payments on his mac and took his computer. I am not that familiar with mac, but am usually computer savy. However, this one has me stumped. I have no problem starting the built in cam and it seems to work fine with all other programs I've tried using it with. However, it will not work with yahoo. Whether I use normal yahoo messenger or if I try using Yahoo through I chat. The cam button will not light up, therefore, it is not clickable. Which ultimately means I cannot use my cam on yahoo, which is something I use 99% of the time compared to other programs. So why is this happening and what solutions can I take to try and fix this? The mac I am using is: Mac OS X, Version 10.7.4
Thank you for any and all help, it is much appreciated.Welcome to Apple Discussions!
1) If the iTunes preference window is open when you connect your iPod, the iPod will not be recognized by iTunes.
Also, iPods can work with many iTunes libraries, so that is not the problem here.
Is all the software on your computer up to date?
iTunes
iPod Updater
Updating iPod's Software
Does the iPod show up in My Computer when connected to your computer? Does it say Do Not Disconnect?
Try the steps listed here...
iPod shows up in Windows but not in iTunes
If you are going to use your iPod with multiple iTunes libraries (home and school)...
Using iPod with multiple computers
2) What part aren't you understanding. Here are a couple of free programs you can use to convert videos...
MPEG Streamclip
Videora iPod Converter
The programs should come with documentation and instructions to convert videos.
3) You can go to file-->add file to library, file-->add folder to library, or have iTunes open and drag the files into the iTunes library while viewing the library.. You can also import from CDs.
iTunes needs to be adding the songs to the iPod. You cannot just add the song files to the iPod.
btabz -
Volume on all games is dead but rest of sound works fine?
Checked the volume of all the games individually and they all work fine but no sound! All other sounds work fine.I have the 4th generation ipad
Never mind! All fixed, im new to iphone 4, didnt realise the switch at the side of the phone turned sound off. sorry
-
I have just finished the upgradation to an iOS 6.1.3 and have lost sound in Music and Videos. I am using an iPhone 4S. My iPhone doesn't produce sound when playing Youtube or local camera videos. However ringtones and notifications sound works fine.It is quite strange as well. Have you encountered this issue before?If yes then what's the solution?
I had major issues with the iPhone 4s battery, however it’s resolved.
The tech who set the phone up at the Apple store did so with little training.
if you have a mobile me account. First go and move all your data to the cloud by going on your computer and logging in at me.com/move. The cloud has replaced mobile me, so there is no need for those two accounts
Also make sure that for any of your email accounts you set them up to fetch, not push. My tech person set them all to have the email servers push data to the phone. The new iphone4s antenna is extremely strong so it will continually try to access stuff that is pushed–***** a lot of battery life doing this. It makes it worse if you have exchange 2010 accounts. Something about changes made to exchange really suck battery life from devices that access such accounts.
turning of locator and the push notifications from facebook--they have a lot! -
Question
WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp
-
I m trying to send a email and sms alert to people and it works fine on all systems expect on Iphone,the problem is swedish charcters doesn't show on iphones used by people in sweden but works absolutely fine on iphones in india.
the code i m using is right below,plz have a look and not into the problem as problem is a bit strange.
$headers = "MIME-Version: 1.0\n" ;
$headers .= "Content-Type: text/plain; charset=\"UTF-8\"\n";
$headers .= "X-Priority: 1 (Highest)\n";
$headers .= "X-MSMail-Priority: High\n";
$headers .= "Importance: High\n";
// Additional headers
$headers .= 'From: Rakesh <[email protected]>' . "\r\n";
foreach($disemail as $email)
$to = $email;
$subject = $succMessage['email_subject'];
$message = $smsText;
mail($to,'=?UTF-8?B?'.base64_encode($subject).'?=',$message,$header);
if (stripos($_SERVER['HTTP_USER_AGENT'], 'MSIE') !== FALSE) {
$smsText = utf8_encode($smsText);i have tried this new charset combination specifically for iphone and i m waiting for response from sweden alliance.....i hope this works fine as iso works great for 8-bit characters.
would like to have your thoughts though.
$headers .= "Content-Type:text/plain; charset=\"iso-8859-1\"\n format=flowed Content-Transfer-Encoding: quoted-printable";
Maybe you are looking for
-
I rented a movie from itunes on my ipad and now want to play it on my appletv, but cannot get it to show up. What do I need to do?
-
Whenever I want to play a video on my iPod, on any app, the video automatically connects to my TV. How can I stop this and play the videos on my iPod?
-
Child actions are not allowed to perform redirect actions. partial view
I'm using ASP .NET MVC 5 I'm trying to use Create view with the index view to show the created item in the same page. For that I'm using _CreateCategory as the partial view and I added following to the index view {Html.RenderAction("Create", Model);}
-
J_security_check with mysql db?
Hi, I've been trying to figure out this problem for a while now. I have the following in my web.xml <security-constraint> <web-resource-collection> <web-resource-name>All JSP direct access</web-resource-name> <url-pattern>members/*</url-pattern> <htt
-
Tracking number of JSPs a user visits in a session
Hi everyone: My coworkers and I need to track the number of pages a user visits while visiting our site. We set a cookie in the login servlet. If they're not logged in and they visit 5 pages, we want to redirect their request for a 6th JSP to "please