TS3408 I am unable to use Safari because the web pages fail to load or does not load graphics. I am not pleased with the current Safari and will now have to use a secondary browser.

My issues is with multiple websites. Buttons do not work, pages do not load completly or the graphics are not visible. I need to use another browser such as FIrefox or Chrome.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Similar Messages

I got my iphone 5 3 weeks ago and the battery life is very short. It drains out very fast. Does anyone know if it's a problem with the iOS or with my phone? Because I'm a bit concerned

I recieved my iPhone 5 3 weeks ago and the battery life completely *****! After doing a few things and maybe using it for about 30 minutes the phone start overheating like crazy then the battery starts dropping very fast. Does anyone know if it's a problem with the iOS or with my phone? And is anyone else expierenceing these problems?

It sounds like you have an app that is incorrectly continuously using data and power... from normal use the phone should NOT be getting that warm... only constant video playing via data like Netflix for example would result in that...
I'd say that you should remove all apps in the recent app tray... tunr phone off... then once you power back on...
Hold BOTH home and sleep wake buttons together until you see a white apple symbol... then release both buttons...
This will ensure you have no apps running...
I've experienced a hang up with mail while out and about that has resulted in this on my iPhone as well... Once I performed these steps it was fixed... it seemed like it got stuck and that's what caused the warm phone and battery drain...
I notived that when it gets stuck (mail app that is) I will see the text connecting at the bottom and it never changes to "updated" like it should... this is my trigger that it's gotten stuck.
Have not really figured out what causes mail app to get stuck yet...

Hello there! I have a 2nd generation Ipod and right now I cannot use a lot of app because of its old software. Is there a way to solve it?

Hello there! I have a 2nd generation Ipod and right now I cannot use a lot of app because of its old software. Is there a way to solve it?

Only by purchasing a newer model iPod.
To more easily find compatible apps for your 2G
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.

Neither Firefox or other web browser will access the net UNLESS I use the restore feature. The next day the problem occurs again and again I have to use the restore feature? It works on my laptop so not ISP problem do I have a trojan or something?

It seems that no browser will work. Firefox is my preferred browser but IE wont work either unless I use the restore function and then they work fine. However if I close my computer down for any reason they wont work and again I have to use the restore function. My email program works just fine (I use Agent) my ISP says there is no problem with my connection. My Firefox on my laptop works just fine and it uses the same connection as my desktop where the problem is.

This can be a problem with the file [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.
See:
* http://kb.mozillazine.org/Session_Restore
See also:
* http://kb.mozillazine.org/Firefox_crashes
* [[Firefox crashes]]

Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

Safari keeps giving and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
It only seams to have a problem with https sites.
Any help would be appreciated

The "s" in "https" indicates the site is a secure server--usually a site that will require a password. Connections to secure servers can be blocked by parental controls. Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)? If so, check the settings to make sure they will allow the connection.

FF not printing right hand side of the web page using MAC OSX

FF is not printing out the right hand side of the web page. 1/2 to 1 inch i text is just cut off. Never had a problem in the past with this. Just happened, I believe after I upgraded FF. I am using MacBook Pro OSX.
== This happened ==
Every time Firefox opened
== I believe after I download the new FF update

Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10.4; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
I have had problems with Firefox printing pages through most of the Firefox versions. I have tried printing in different ways to no avail.
Among my attempts:
printing to pdf, printing selected text, scaling down the page, using the print mode if the art. offers one. None seem to fix the problem.
Not only does the right margin text get cut off but oftentimes only the first page prints, the rest of the article doesn´t. It just happened again so I went to Safari and the problem disappeared. I believe there´s a serious problem here.
Below see a shot of what the preview of a 12 page article becomes when printed.
http://www.npr.org/templates/transcript/transcript.php?storyId=128222247

Question about using PowerShell to detect web page availability and then perform alternate action.

I have a specific Windows 7 machine that needs to always display a specific Intranet page. (it shows an internal status page in kiosk mode).
If this machine every loses connectivity to the web server, unfortunately, the browser shows the typical "web page could not be retrieved" error message and it never recovers. I need to manually reload the page when the connection is restored.
I'm thinking if it would be possible to write a PowerShell script that checks the connectivity/availability of the Intranet page and if it detects an error, it would launch a browser that points to a local file html file which would say something more professional
and graceful like "site temporarily down for maintenance." Also, if the PowerShell script could run on a regular interval, when the Intranet page becomes available again, it would close the browser that is showing the maintenance page and start
showing the page with the original Intranet site.
For the Intranet site checking, I was looking at the invoke-webrequest: as the mechanism.
Any guidance would be appreciated as I am new to PowerShell.

With these lines you get the static content of the web page:
$page = new-object net.webclient
$page.UseDefaultCredentials = $True
$Page.DownloadString(“http://www.intranet.local.com/”)
You could first check whether the web server is pingable, then use the lines above to see whether there is a HTML response.
If the web server doesnt respond you could kill the browser process and then open a HTML page stored locally on the Win 7 client:
Invoke-Item .\ErrorPage.html
If the web server responds, kill the browser and restart it showing the Intranet page.
All this run from a scheduled task.

Fire fow will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Firefox will not let me use curtain buttons and drop down menus for web sites. i had version 7.01 and upgraded to verson 8.02b and it did it on both of them. and the web pages work find if i use chrome

Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
Download a fresh Firefox copy and save the file to the desktop.
*Firefox 21.0.x: http://www.mozilla.org/en-US/firefox/all.html
Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
*Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will lose all personal data like bookmarks and passwords from profiles of other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
If you keep having problems then also create a new profile.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

HT1567 GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE PO

GOOD DAY I JUST WANNA ASK IF,, WHAT IS THE POSSIBLE THING FOR ME TO DO IF MY IPOD 2ND GEN HAS A PROBLEM WITH THE BACKLIGHT,,, IT ALWAYS TURNS INTO DIM WHEN I USE IT ,,, BUT SOMETIMES IT WORKS JUST FINE,,, PLS TELL ME WHAT TO DO,, THANKS AND MORE POWER

Please don't shout.
Has the unit EVER been jailbroke? Has it EVER been dropped? Did it EVER get excessively wet? Did you EVER load a pirated developer's version of the IOS?
If "No" to all the above, first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore and you have IOS-6 or lower, go into Recovery Mode per the instructions here. Also, if you have IOS-7, read this.

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

1. I have an iPod which has purchases synced with I tunes with an apple ID. I now have an iPad with a new ID for cloud. I have cloud storage capacity of 5gb which came with the iPad. How can I use one ID and store my existing music in cloud?

HI Frostyfrog
CHeck out iTunes Match which has an annual fee of £21 or thereabouts. You can store a maximum of 25,000 songs there and they all become available on your other kit, iPhone, iPad and iPod. I know it works as I have over 23000 songs uploaded of which only a few we're bought through iTunes.
it works by comparing your music to the whole iTunes music dadata base so you access the same tunes that you could get from iTunes. If you have obscure stuff, it uploads your own music to the cloud as a copy.
I Find it incredible that on my iPhone with its 16gb memory I can view almost 200 gb of music (ie my 23000 songs) and play any of them. Anything I add to iTunes becomes available via the cloud fairly quickly from a few minutes or a little longer if adding a lot.
The first time you use it it will take quite a while to match your music if you have a lot, but after that it is all automatic. Read the stuff on the apple site. Your PC needs to be at least running Vista. I recommend it and at less than 50p a week it's good value.
Good luck

Trying to get my fcp project to burn to dvd at the highest quality? Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

Ive used compressor and then tried to put it in dvdsp put its not working. I am having problems with the audio or when i burn it , i cant play the dvd? any help would be appreciated

I suspect you are attempting to burn an HD DVD, which will not play on a DVD player...
But if you provide more details such as the settings you are applying in Compressor, then we would be able to provide you more accurate information.
How are you adding the files to Compressor?
In FCP, what are your footage properties (command-9) and sequence settings (command-0)

What table and fileds we have to use to develop a report for blocked

what table and fileds we have to use to develop a report for blocked invoices?

VBRK-RFBSK
<b>     Error in Accounting Interface
A     Billing document blocked for forwarding to FI
B     Posting document not created (account determ.error)
C     Posting document has been created
D     Billing document is not relevant for accounting
E     Billing Document Canceled
F     Posting document not created (pricing error)
G     Posting document not created (export data missing)
H     Posted via invoice list
I     Posted via invoice list (account determination error)
K     Accounting document not created (no authorization)
L     Billing doc. blocked for transfer to manager (only IS-OIL)
M     Analyst Approval refused (only IS-OIL)
N     No posting document due to fund management (only IS-PS)</b>
Regards
prabhu

Using Tiscali Webmail with Firefox 6. If I try and delete an email the Ok and Cancel buttons are disabled and nothing happens, have to use F5 to take me back. IE8 works so is this a compatibility issue?

Using Tiscali Webmail with Firefox 6. If I try and delete an email the Ok and Cancel buttons are disabled and nothing happens, have to use F5 to take me back. IE8 works so is this a compatibility issue?

It appears OP solved the problem: [/questions/874744]

How can I save the web page by using the Page Title as the file name ?

When i use Internet Explorer ,I can save the web page by using Page Title as the file name(as default no need to adjust anything). But when i use Firefox ,It can not use the Page Title to save as the file name. How can I do that like in Internet Explorer?

See:
*File Title: https://addons.mozilla.org/firefox/addon/834
*Title Save: https://addons.mozilla.org/firefox/addon/712

I have a eMac PowerMac4 and use quarkXpress (v 5) and filmaker pro 6 (v 1) and will be purchasing a new iMac soon. Will I have problems using these programs?

I currently have an eMac and will be buying a new iMac soon and need to use the QuarkXpress (have v. 5) and FileMakerPro (have 6 v. 1) software for a current formatted newsletter I produce. While I can get the latest version of FileMaker pre-installed by Apple, Quark is no longer available at Apple. If I purchase QuarkXpress 8 (I have read there are problems with v. 9), will I be able to add my current files to the iMac and have everything work? Thanks.

I found that the QuarkXPress (v. 5) has the ability to Export and Save As....
I tried save as, but didn't see any way to have it saved as anything other than the Quark.
I also have found this in a apple forum:
This solved my questionRe: Will Quark 7.5 work with the new Lion upgrade?
Aug 31, 2011 7:35 AM (in response to machttps)
Have just installed Lion and Quark 7.5 works well plus Adobe CS3 with the Java Run updates etc very pleased with the new Lion from Appple.
I don't understand how this poster could get Quark to work on Lion, I thought I read Quark requires rosetta to run it (or maybe the Fix for the end of August took care of that). However, this person had the 7.5 already, but I can only upgrade to a certain level while in Tiger, so this apparently is where the problem arises (?).
I also have come across a disc to update Quark to 5.01, but that's not much I suppose.
Any help is GREATLY appreciated!

TS3408 I am unable to use Safari because the web pages fail to load or does not load graphics. I am not pleased with the current Safari and will now have to use a secondary browser.

Similar Messages

Maybe you are looking for