TS3479 I have a iMac mid 2011 with Mac OSx Lion 10.7.4. I was using iMovie suddenly today I found iMovie is not starting a window is popping up saying "iMovie requires a graphics card that is compatible with Quartz Extreme. One or more of your graphics ca
I have an iMac Mid 2011 model intel i5 with AMD Redeon HD6750M 512 MB graphic card, 8 MB RAM.
I was using the imovie the other day and down loaded some of the vedio clips from Sony camcorder.
All of a sudden today while I was trying to open the iMovie it did not a window poped up saying that
iMovie requires requires a graphic card that is compatible with Quartz Extreme................
What is these nonsence thing happening ........
Can any body provide some clue how to resolve the issue
Thanks and regards in advance
Bijan
If it was previously working then try a smc and pram reset.
If that doesn't fix it then see if vlc can handle the video.
Similar Messages
-
Do you have a problem connecting to Wi-Fi? (iMac Mid 2011 Model)Mac OSX Lion 10.7.3
Did you just start up or restart your mac recently? If you did you might have experineced a problem with your Wi-Fi. I was unable to access anything that required Wi-Fi. So what I did was I restarted my iMac and my Wi-Fi was working again.
What might have caused the problem
A. The Wi-Fi chip did not start or restart (During the process of Starting or Restarting your iMac)
B. It could be a bug in Mac OSX Lion 10.7.3 or lower.
I hoped this helped you outIf it was previously working then try a smc and pram reset.
If that doesn't fix it then see if vlc can handle the video. -
I have a imac mid 2011 model, why can't i connect to airplay? And the airplay icon does not show in the menu.
Hi there cjperido,
You may find the troubleshooting steps in the article below helpful.
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/ts5209
-Griff W. -
The apple store is so unhelpful. I have an iMac computer operating on Mac OSX 10.5.8. I want to upgrade to the latest Mountain Lion operating system so I can work with the iCloud on my computer and download my emails. I can't seem to purchase this on-line as it keeps telling me to go to the app store. I haven't got the app store on my computer as I am told I need iCloud for which I need the new operating system, which I can't download or purchase as I am sent back to an instruction telling mee to go to the app store icon.
How difficult can it be to simply purchase the software on-line have it shipped to you so you can install it, in the event it cannot be downloaded as it appears it can't be based on my curent operating systems being Mac OSX 10.5.8.Requirements for OS X 10.6 'Snow Leopard'
http://support.apple.com/kb/SP575
Whilst Apple have withdrawn Snow Leopard from download, you can still get it from Apple by calling 1-800-MY-APPLE (if you are in the USA) and they will supply the SL DVD for $30. You can also purchase the code to use to download Lion from the same number.
Requirements for Mountain Lion:
http://www.apple.com/osx/specs/ -
I have an Imac G5 running on Mac OSX 10.4.11 and would like to upgrade to Lion. I need to upgrade to Snow Leopard first but the aplle dealer tell us here the Snow Leopard is no more available on Power PC. Can anyone help?
Does your Mac meet Lion's requirements?
Apple - OS X Lion - Technical specifications
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Snow Leopard requirements:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation -
Migrate from Exchange Server 2011 to Mac OSX Lion Mail Server
Hi all,
I'm looking to migrate from Exchange Server 2011 to Mac OSX Lion Mail Server. I work for a company with roughly 30 employees and they use exchange for mail, contacts and calendars. We want to take full advantage of OSX Server and to completly get off of exchange.
What are the best ways to do this? Are there any tools available to help this process?I agree with the points made by Strontium90. If you have any PCs then Apple's mail/contacts/calendar software is a poor choice. Kerio Connect as a mail/contacts/calendar server would not only support Macs but would also do a good job supporting PCs running Outlook.
If you are going to become a pure Apple site, then you could use just the Apple software and this would be cheaper than using Kerio. For 30 users this might be a suitable solution, however even in a pure Apple environment many people prefer Kerio. For example I find Kerio much more pleasent when dealing with email addresses across multiple domains, email aliases, email group addresses, and so on. Kerio also has built-in email archiving, that is keeping a record of all emails. Kerio also provides a web-browser client for accessing email, calendar and contacts. It is worth noting that as standard Mountain Lion Server no longer includes a webmail feature. While I personally find the Kerio webclient rather ugly it does work.
There are some annoyances I have with Kerio, firstly they have always charged a 'maintenance' fee for their software. This provided access to software updates, and in the past also provided access to Kerio technical support. Unfortunately they now only let you make two (2) support cases per year for that cost, and you now have to pay extra for any more cases. Also while they added support for EWS (Exchange Web Service) to allow using Outlook 2011 for Mac as a supported email client, they did a poor job of this so that it does not work properly with any other EWS compatible client. This means it will not work in EWS mode with Apple Mail, nor with Outlook for Windows. While there are other ways to connect these other clients, this seems a foolish move and there have been plenty of requests to fix this.
Apple's Mail client uses EWS to connect to a 'real' MS Exhange server. -
I bought a new mac including 10.8 Mountain Lion. (How) can I now install 10.8 on my older iMac (mid-2011) which came with 10.6?
You will need to buy it at the app store. The license for the pre-installed OS on your new machine is only for that machine. Only OS's purchased from the app store can be installed on more than one machine (as long as you own it).
-
I have an iMac mid yr 2009 with snow leopard. I checked and my howdoi.swf 8.o r22 is power pc and my HP sofware updater is also power pc. How can I update these appls to be compat with Lion, as I am not computer savvy. or should I wait awhile to install Lion?
Lion upgrade questions and answers: Apple Support Communities
You may want to hold off upgrading to Lion for a bit and check with the HP site to see if they will update their HP software for Lion compatbility. -
Specs: OS X 10.8.2; iMac Mid-2011.
Anyone else having this issue? What wasyour fix?Thanks for the reply, but I did a silly thing - or didn't do due diligence:
After updating my AppleTV its setting for Airplay was set to "off". I just reset it to "on" and all is well in my Airplay-world.
However, thanks to you, I now know how to getting to the Airplay settings - didn't know that before. -
I have an iMac mid 2011 running slowly. What can I do?
I have an iMac Intel mid 2011. It's running very slowly. What can I do?
Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with visits to: OS X Maintenance - MacAttorney;
The X Lab: The X-FAQs;
The Safe Mac » Mac Performance Guide;
The Safe Mac » The myth of the dirty Mac;
Mac maintenance Quick Assist.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
Repair the Hard Drive - Lion/Mountain Lion/Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilites Menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD disk icon and click on the arrow button below.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Restart your computer normally and see if this has helped any. Next do some maintenance:
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
Note: Alsoft ships DW on a bootable DVD that will startup Macs running Snow Leopard or earlier. It cannot start Macs that came with Lion or later pre-installed, however, DW will work on those models.
Suggestions for OS X Maintenance
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or later and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive.
Under no circumstances should you install so-called maintenance software from MacPaw or ZeoBit (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You do not need special software to maintain your computer.
Helpful Links Regarding Malware Protection
If you are having an immediate problem with ads popping up see The Safe Mac » Adware Removal Guide and AdwareMedic.
Open Safari, select Preferences from the Safari menu. Click on Extensions icon in the toolbar. Disable all Extensions. If this stops your problem, then re-enable them one by one until the problem returns. Now remove that extension as it is causing the problem.
The following comes from user stevejobsfan0123. I have made minor changes to adapt to this presentation.
Fix Some Browser Pop-ups That Take Over Safari
Common pop-ups include a message saying the government has seized your computer and you must pay to have it released (often called "Moneypak"), or a phony message saying that your computer has been infected, and you need to call a tech support number (sometimes claiming to be Apple) to get it resolved. First, understand that these pop-ups are not caused by a virus and your computer has not been affected. This "hijack" is limited to your web browser. Also understand that these messages are scams, so do not pay any money, call the listed number, or provide any personal information. This article will outline the solution to dismiss the pop-up.
Quit Safari
Usually, these pop-ups will not go away by either clicking "OK" or "Cancel." Furthermore, several menus in the menu bar may become disabled and show in gray, including the option to quit Safari. You will likely have to force quit Safari. To do this, press Command + option + esc, select Safari, and press Force Quit.
Relaunch Safari
If you relaunch Safari, the page will reopen. To prevent this from happening, hold down the 'Shift' key while opening Safari. This will prevent windows from the last time Safari was running from reopening.
This will not work in all cases. The shift key must be held at the right time, and in some cases, even if done correctly, the window reappears. In these circumstances, after force quitting Safari, turn off Wi-Fi or disconnect Ethernet, depending on how you connect to the Internet. Then relaunch Safari normally. It will try to reload the malicious webpage, but without a connection, it won't be able to. Navigate away from that page by entering a different URL, i.e. www.apple.com, and trying to load it. Now you can reconnect to the Internet, and the page you entered will appear rather than the malicious one.
An excellent link to read is Tom Reed's Mac Malware Guide.
Also, visit The XLab FAQs and read Detecting and avoiding malware and spyware.
See these Apple articles:
Mac OS X Snow Leopard and malware detection
OS X Lion- Protect your Mac from malware
OS X Mountain Lion- Protect your Mac from malware
OS X Mavericks- Protect your Mac from malware
About file quarantine in OS X
If you require anti-virus protection Thomas Reed recommends using ClamXAV. (Thank you to Thomas Reed for this recommendation.)
From user Joe Bailey comes this equally useful advice:
The facts are:
1. There is no anti-malware software that can detect 100% of the malware out there.
2. There is no anti-malware that can detect everything targeting the Mac.
3. The very best way to prevent the most attacks is for you as the user to be aware that
the most successful malware attacks rely on very sophisticated social engineering
techniques preying on human avarice, ****, and fear.
4. Internet popups saying the FBI, NSA, Microsoft, your ISP has detected malware on
your computer is intended to entice you to install their malware thinking it is a
protection against malware.
5. Some of the anti-malware products on the market are worse than the malware
from which they purport to protect you.
6. Be cautious where you go on the internet.
7. Only download anything from sites you know are safe.
8. Avoid links you receive in email, always be suspicious even if you get something
you think is from a friend, but you were not expecting.
9. If there is any question in your mind, then assume it is malware.
Troubleshooting Applications
I recommend downloading a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaner, or Cocktail that you can use for removing old log files and archives, clearing caches, etc. Corrupted cache, log, or temporary files can cause application or OS X crashes as well as kernel panics.
If you have Snow Leopard or Leopard, then for similar repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later.
Basic Backup
For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
1. A Time Machine preferences panel as part of System Preferences;
2. A Time Machine application located in the Applications folder. It is
used to manage backups and to restore backups. Time Machine
requires a backup drive that is at least twice the capacity of the
drive being backed up.
Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Get Backup
3. Deja Vu
4. SuperDuper!
5. Synk Pro
6. Tri-Backup
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
Referenced software can be found at MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Pre-Mavericks
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Mavericks and later
Open Activity Monitor in the Utilities folder. Select All Processes from the View menu. Click on the CPU tab in the toolbar. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time (>=70,) then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file. -
Hello, I Have a iMac 21.5 inch Mid 2011 running latest version it can (10.7.5) I have purchased 10.8.4 directly from the app store. How can I update the computer to it? Do I simply just double click on on it?
Thanks!If the installer's on your computer, double-click it and follow the onscreen directions. If not, log into the Mac App Store with the Apple ID used to buy it, click on the Purchases tab, and download it.
(88469) -
anyone have this experience?
We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.
-
My Macbook will not start like it normally does, it says update required. What is wrong?
My macbook says "update required" everytime i turn it on. It just shows me a grey screen and then I have to log in with my password. I cannot see my account picture either. What to do? I have recently reset my Macbook.
Back up all data.
If you have more than one user account, you must be logged in as an administrator to carry out these instructions. I've tested them only with the Safari web browser. If you use another browser, they may not work as described.
Triple-click anywhere in the line below on this page to select it:
sudo fdesetup sync
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. You'll be prompted for your login password. Nothing will be displayed when you type it. If you don’t have a login password, you’ll need to set one before you can run the command. You may get a one-time warning not to screw up. Confirm. You don't need to post the warning.
If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Log in as one and start over.
Wait for a new line ending in a dollar sign (“$”) to appear. You can then quit Terminal. Test. -
IMac (mid 2011) with HDD replaced does not start- I have grey (sometimes blue or green) screen
I had a similar issue in June and despite the efforts of Genius team nothing changed until I uninstall Flash player and reinstall the last version. So, this I did the same and it semeed to work but instead of working more than 2 months , this time it was only for one day and crashed. I had some kind of blue vertical stripes all over the screen.
I did not revived it since.
When I start in Recovery mode, after I select the disc to boot from, I get a grey screen.
I tried all other mode I know, nothing changed.
Could it be a hardware issue?Anyone know? :(
-
I just upgraded to Mountain Lion after purchasing Apple TV yesterday from Best Buy.
I have signed in on the same wi-fi network (comcast 30mbps)
I was able to see photos from my wifes Iphone but not my IMac or Mac Air
Both computers connect but I am only getting audio.
I updated software on Apple TV
I shut everything down and reset my router. My Mac Air 13" 2012 was able to see the desk top but not anything that I was doing and then it disconnected.
I also tested the internet speed on the Apple TV but it just told me it was finished. (no results)WEP as a security measure is laughable nowadays. Even a kindergarten kid with a netbook can crack the password in a few minutes. Try using WPA2 if available on the device. And the Macs will be quite happy connecting with that protocol.
Maybe you are looking for
-
ALV report run In background gives 2 spool numbers
Hi , The ALV report which I am running in Background gives me 2 spool numbers after the Job is created in sm37. I am just executing my ALV report by running it in backgroung procressing, but I get 2 spool one has all the correct data of the ALV and 1
-
"Server Busy" Error in Windows 8.1
Since yesterday, I have been unable to use Dreamweaver due to a "Server Busy" error coming up when I start the program. I have installed the available update through CC and am still etting the error, and all documentation on said error is for earlie
-
Email client issue Symbian Belle
Hello everyone. I just installed Symbian Belle in my nokia N8, and configured the email client with my Gmail account. I'm getting a strange error when I try to read any message of my inbox. Every time that I try to read a message, all that I can se
-
SCOM Reporting Server Installation Give Error The specified SQL Server instance is not valid
Hi All, I am trying to install SCOM 2012 SP1 Reporting Server on a Windows Server 2012 running SQL Server 2012 SP1. The SQL Server also host instance for SCCM 2012 SP1 named SCCM, and not in clustered environment. For SCOM 2012 SP1, I choose SQL inst
-
I hope someone can help me. I have a document with an imported logo. The logo has one color, supposed to be PMS 267-C. The document has two colors of text, PMS 267-C and black. Can I convert process to spot in InDesign for the document so that it pri