TS3682 when i want to restore backup from icloud this message will appare on my iphone 4s *move your mobileme account to icloud* whats mainig of this messave?
when i want to restore backup from icloud this message will appare on my iphone 4s *move your mobileme account to icloud* whats mainig of this message?
Apple has shutdown MobileMe. You have to switch over to iCloud.
Similar Messages
-
My Iphone has a message Iphone disabled, connct to Itines. When I connect to Itunes I get a message "there is a passcode on your Iphone cannot connect.. Now what?
You have to put iPhone into Recovery Mode and Restore. Open iTunes on your computer. Connect iPhone to computer with USB Cable. Hold both home and power buttons for about 20 seconds until iTunes recognizes iPhone in Recovery Mode. Click the Restore button of iTunes.
-
How do I prevent icloud from overwriting my contacts when doing a restore backup from PC to iphone?
My icloud contact list is screwed up. I have my contact list in my PC backup. I've removed icloud from iphone AND changed apple ID and icloud ID, yet when I attempt to restore backup from PC to iphone, my correct contact list shows up momentarily, then reverts to the screwed up icloud contact list.
I understand that my PC backup is set to connect to icloud; however, one would think by removing the email address associated with apple or icloud that it would not be able to connect to icloud when I do a restore backup from PC to iphone. Yet each time I find icloud connected via my old email address after attempting the restore.
How do I fix this? This seems like an icloud bug, since it connects via my old email/ID.The problem may be that the iphone is immediately syncing with icloud and losing the newly restored data. You might turn off your router. Once restored, turn off icloud on the device, turn on the router, then turn on the iphone.
(I'm going by memory on this, and that hasn't been too reliable lately.) -
Need help with restore backup from icloud
Hi.
A few days ago I've deleted data and settings from my iPad and updated it to 8.1.2. Then, I wanted to restore backup from iCloud, but got error, that I can't restore my backup. Tried three last copies, other wifi, many solutions from support - the same error. Support said me, my backups are broken. And they can't help me.
OK. I've found some programs in internet for download backups and restore it. Only trials. And they work, they see my backups, download and show me my data. I need to buy program to restore data to my iPad. I don't want to buy, because, if that programs can restore my data, why Apple support can't do this?Photos and videos from your camera roll are backed up to iCloud when you do an iCloud backup.
This article tells you how to restore an iCloud backup:
http://support.apple.com/kb/TS4036 -
How to restore backup from different device
Hallo... seems I have problem with downloading backup from my older ipad mini (16gb) into newer ipad mini retina (32gb)... during the first setup it aksed me if I want to restore backup from older device, but since my older ipad and its backup was on ios 8.0.2 and newly purchased ipad was still on 7.1.2 i needed to skip this and upgrade os first. now I have new device set up and running ios 8 but I can not get into it backup from older device. what to do?
Resetting the iPad back to factory defaults should take you to the setup process and let you restore to an iCloud backup : Settings > General > Reset > Erase All Content And Settings
Back up and restore your iOS device with iCloud or iTunes :
You can go through the iOS Setup Assistant again by erasing all the content on the device. Just tap Settings > General > Reset > Erase All Content and Settings. This will remove all content from your device, so do this only if you already have a backup. The iOS Setup Assistant is the only way to restore a backup. -
Had 3G, moved to 3GS. Backed up 3G and restored 3GS from backup with no problem on a Dell computer. But now when I want to add songs, I get itunes message of death that the new iphone is synced to another computer and now wants to erase everything. How can I add music without erasing everything on my new iphone?
Yes, I was aware of this but the phrase "Any items imported from audio CDs or acquired from other sources will not copy from your device to the iTunes library." is what worries me. Will this eliminate my Notes, Calendar Events, etc or will it apply mostly just to the music?
-
I would like to know if "Restore Backup" to my new phone will load up all the information I have which backed up from my other phone. I only "clicked" on "Backup" when I connected the new phone to my computer. I was afraid to click on "Restore Backup" to have all the other information I had from my other iPhone load up to my new iPhone. Hope you can help. What is the difference between "Backup" and "Restore Backup"; is all that different from synching.Thanks. Ana
That's up to you. Do you want the data on your old phone on your new phone? If so, you follow the directions here:
http://support.apple.com/kb/HT2109
If you want to setup your new phone as a new device, then there is nothing you need to do. -
I wish to update my ipad 2 from ios 4.3.3 to ios 7, i follow all the steps and until the end, when i want to restore back, it occurs error 3004. How? and now i can't even use my ipad at all, it's empty.
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers. -
When I try to turn on my new iPhone 5s, the ONLY options it gives me is to either backup from the iCloud or restore backup from iTunes. I have already restored the backup from iTunes, so I don't know why it keeps telling me to restore the backup. And why won't it give me any other options? I can't text, call, etc. My phone will do NOTHING.
Any suggestions?It seems you restored from a blank back up if it is still asking you to choose one of those options. Set it up as new then manually restore from back up with iTunes on your computer and be sure to check the date of the back up an which phone the back up is from.
-
i am getting an error message while managing my cloud it says "cannot turn off backup" when i want to remove apps from the clous. how do i fix?
Hey ktillis88,
Thanks for the question. Based on the information you have provided, the following resource may be helpful:
iCloud: Understanding Backup alert messages
http://support.apple.com/kb/TS4576
"Backups for appname cannot be turned off at this time."
This message occurs if disabling Backup for an app on your iOS device does not complete successfully. Wait a few minutes and then attempt to disable Backup for the app again. If you continue to receive this alert, contact iCloud Support for assistance.
Thanks,
Matt M. -
i have upgraded ipad with the latest version of ios. However, while restoring backup from itunes to ipad, a password is being asked. i do not have password, how to go about?
Restore from iCloud Backup
1. Erase all contents and settings (Settings>General>Reset>Erase all content and settings)
2. You'll be asked twice to confirm
3. You'll see Apple logo and progress bar
4. You'll see a big iPad logo on screen
5. Configuration start
6. Set language
7. Set country
8. Enable Location Service
9. Select network, enter password and join network
10. You'll be given 3 options (a) Setup as New iPad (b) Restore from iCloud Backup (c) Restore from iTune Backup
11. Selected Restore from iCloud Backup -
I tried to restore backup from itune to my new iphone 5s but have forgotten the password what should I do?
JennyGEL wrote:
I ... have forgotten the password what should I do?
Which password?
If you mean the passcode to your iPhone, here's the solution:
http://support.apple.com/kb/HT1212
If you mean the encryption password to your backup on your computer:
Warning: Make sure it's a password you will remember or write it down for safekeeping. If you encrypt an iPhone backup in iTunes and forget your password, you can't restore from backup and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and chooseset up as a new device when iTunes prompts you to select the backup from which to restore. -
What can i do when i want to restore if i have deleted my text message(sms)
what can i do when i want to restore if i have deleted my text message(sms)...
please helpProvided you have recently synced you phone then the SMS are stored in the iPhone backup made by iTunes during the sync process. If you restore you can choose to restore from backup which should mean that you don't lose the SMS.
-
ITunes asks me all the time when i Want to restore my iPhone 4s a code to unlock my safety
I did something wrong and When I wanted to restore my iPhone itunes asks me al the time the password to unlock my iPhone's backup and I try I'd password, my iPhone's id etc and it doesn't work and I dont know what to do And now I'm stuck and cannot use my cell at all?
please help meMachiah wrote:
I did something wrong and When I wanted to restore my iPhone itunes asks me al the time the password to unlock my iPhone's backup and I try I'd password, my iPhone's id etc and it doesn't work and I dont know what to do And now I'm stuck and cannot use my cell at all?
please help me
It sounds like the problem is you have forgotten the password for your password-protected backup. See: iOS: Troubleshooting encrypted backups - Apple Support -
We wanted to perform backup from command prompt but we want
OS: :Linux
DB version: 10.2
I am doing weekly hot backup.
I used rman for my backup.
No issue on backup.
I just ran the backup succesufully (on 070307).
But Enterprise Manager is not updated.
Its still showing last backup performed on 07 Nov 2006.
But from command prompt by using rman its showing current backup (on 070307).
I think EM shown backup status only
if user used EM to perform backup.
Is it correct?
If yes how to fix this issue, we wanted to perform backup from command prompt but we want backup status should be updated in the EM simultaneously.
DHi,
Within EM it is assumed that a control file backup will take place unless you specifically ask it to perform through a recovery catalog. I can't remember at the moment how to do this as I am at home but when you go into the admin/maintenance side of EM there will be an option to chose recvoery catalog. However saying that, EM should still report back even if a control file backup has been carried out.
also i think if you are using a comand prompt then EM will not know about it. You will have to define the job from EM for it to register.
rgds
alan
Maybe you are looking for
-
My Skype number is not working. No sounds, No rin...
I really haven't needed it so I have not tried it in months. But, I tried to add this number to my paypal account and found it wasn't working. Then I tried to call it. No sounds at all. No ringing, no busy signal - nothing. I will not post my num
-
As I was downloading a word processing application I made sure I Unchecked ANY boxes that asked me to change my homepage or my default web browser to something "other than what it already was". But when all was said and done I suddenly have "BING" as
-
How to convert my MM alias into an AppleID to use it with iCloud?
I used MobileMe and created a mail that became my Apple ID. Then I created an alias that became my main e-mail so now with iCloud I wish that aslias could become my Apple ID. I don't care to loose the first Apple ID but "How to convert my MM alias in
-
Hi All, I am getting the following error when tried to connect to the sap system Database is SQLSERVER trc file: "dev_disp", trc level: 1, release: "640" Thu May 22 18:21:37 2008 kernel runs with dp version 130(ext=102) (@(#) DPLIB-INT-VERSION-130) l
-
Converting Tif file to GIF or JPEG
Could you provide me with an example to convert a TIF file to GIF or JPEG with the JIMI or tell me of a good link where I can learn how to do this?. I downloaded the JIMI library but I cannot find documentation or a clear example to carry out this co