TS3694 what is error 3014.It is listest in the apple error directory but with no **** solution provided by apple!!

whatis this **** error and how do we overcome it? Apple does not provide a solution!

Create a new profile as a test to check if your current profile is causing the problems.
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]]
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Similar Messages

What does it means when you turn on the macbook and a file with a "?" mark flashes?

What does it means when you turn on the macbook and a file with a "?" mark flashes?

It usually means some system files are missing or corrupted. Reinstalling OS X is the fix:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes:Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufac

I am trying to update my iTunes to 10.5.1 so that I can upgrade my 3GS phone but am getting the following error message when trying to install the itunes: Install step failed: Run pre upgrade script for apple mobile device support. Contact software manufacturer for assistance. I am on a MacBook pro running 10.5.8 OS. Has anyone seen this before and how can I get it resolved.
Thanks for your help in advance....

Did you ever figure out the problem? "Contact Software Manufacturer"?? That sounds ominous... I've got the same issue and I'm pretty durn aggravated right about now....
Thanks!

I get an error stating I need to accept the Adobe Acrobat TOS but there I do not see a place to complete this task. Any ideas how to solve?

Everytime I click a .pdf file on a webpage, I get an error stating I need to accept the Adobe Acrobat TOS but there I do not see a place to complete this task. Any ideas how to solve?

Open Adobe Reader, then accept the EULA.

I keep receiving an error 8268 when downloading content from the iTunes Store. Does anyone have solution for it?

I keep receiving an error 8268 when downloading content from the iTunes Store. Does anyone have solution for it?

contact iTunes Customer support to resolve this issue. They will provide you a fresh copy of the song

TS3694 what do i do???my phone has error 1015.

my phone sofware updation has been failed.it showing that here is an error 1015.
what do i do now?please give the solution for me.

Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Hello, what do I have to do to resolve the unknown error message (-42032) ?

Hello,
When I open iTunes, I have a pop-up saying "Unknown error happen (-42032).
Do someone know how I can resolve this incident ?
Do I have to re-instal iTunes
Many thanks in advance for your answer.
Philippe

I would look at the previous discussions with the same error. You can find those on the right-had side of the page under the heading: More Like This.

I am using Dreamweaver CS4 but when I try to launch I get an error code 150:30 and then an Ftp error after Ok is pressed on the first error. How do I resolve the issue?

How do I resolve error 150:30 with an FTP error following the closing of the window for the first error?

Mac?
Really pay attention to the Important: items here:
Error "Licensing has stopped working" | Mac OS

TS3694 what is a 3014 error

can anyone tell me why i get a 3014 error when i try to update my phone and what it means????

Did you look at the "Network connection or download errors" section of the support article from which you seem to have come?
http://support.apple.com/kb/TS3694
That covers the 3014 error specifically and offers tips that, while not specific to that exact error, may also be of help.
Regards.

I have uninstalled and reinstalled the new iTunes but it still will not work. I keep getting the error mesage relating to MSVCR80.dll, the installation error 7 (windows error 126). I have tried moving and removing the dll files including the QTMovie dll

I have tried uninstalling and reinstalling iTunes 15 times regarding the latest release and still get the MSVCR80.dll and Error 7 (Windows error 126) messages.
I have tried moving the dll filesincluding the QTMovie dll file to now avail. Can anyone please help, as I am sure you all, like me, have thousnads of dollars and songs invested in this system and need a fix fast. Can anyone please help???

Dear avid iTunes users - I have cracked it!!!
The response from Apple/iTunes was extremely poor and did not solve the problem.
I have a look in msconfig and observed which applications/services were running - one of which was the 'Apple Application Support'
So ... I had a look at what was in this folder and found the APS Daemon.exe file causing all the trouble.
So ... I simply deleted the Apple folder found in C:\program files\common files\.
I did a restart and did not get the MSCVCR80.dll or Error 7 (windows 126) error messages.
I reinstalled the current version of iTunes (for the 16th time!)
Hey presto!!!
IT WORKED :-O Woooohooo!!!
So ... to all those smarty-pants boffin-brianiacs out there (apple/iTunes): this is how you do it!!!!!!!!!!
YOU DO NOT NEED TO UNINSTALL ALL THE APPLE/QUICKTIME OR RELATED PROGRAMS - JUST DELETE THE APPLE FOLDER IN THE C:\PROGRAM FILES DIRECTORY.
Nuff said.

Whenever I open itunes (not try and sync), I get a duplicate file name was specified error. It also gives me the same error when I try and download music, saying it cant. I just downloaded itunes so not much could have gone wrong so far.

Before you ask, i tried going through the third-party add-on document and opening it up in safemode did not fix it. Also, I am running it as administrator and that is not helping either.

I DID IT! I FIXED IT, FINALLY!!! At least it worked for me. Here's what I did: from Control Panel/Programs/Programs and Features/Uninstall or Change Program, I right-clicked on iTunes and selected Repair. After that ran and completed, I went to Computer/Local Disk (C:)/Program Files. From the list, I right-clicked on iTunes and selected “Run as Administrator.” After that I tried to purchase music from iTunes, and it worked! I hope this makes sense and works for you. Good luck!

What is involved in going from local user accounts to active directory accounts with CCM 9.1.2?

We are currently using local user accounts with CUCM 9.1.2 and are looking at integrating it into the active directory structure.
We do utilize the same structure for user ID's.
I am looking to find out what the changeover will entail and if anything else needs to be done prior to the integration.
We also have Unity syncing up with CUCM for users as well as Contact Center sync'ed up for our ACD system.
Thanks
Mike

Hey Mike,
The process is pretty straight forward. CUCM 9.X supports the coexistence of AD integrated users and local users so you don't have to worry about local accounts disappearing if they don't have an AD account. The biggest thing to watch out for is that if you decide to revert back for whatever reason then the accounts that were in AD will be marked for deletion (from the CUCM, not AD) and will be removed after approximately 24 hours.
I recommend the following if you'd like to move to AD.
Run a DRS backup of CUCM. This is not necessary for the integration but is good practice in my opinion. I'd also do a full export of your users using the BAT so you can reimport users to how they were before the integration should you decide to revert for any reason.
Determine if you want to put the user's extensions in the telephonenumber field or ipPhone field in AD. Once you make a decision, I recommend populating that information in AD so it is available when you do the integration.
Make sure your local CUCM user accounts usernames are exactly the same as your domain accounts. That way when you do the integration the local users become AD users and keep all of their phone associations, group memberships, etc. If you need to change the usernames then be sure to notify your users ahead of time so they can start logging into UCCX or UCM user pages, etc. using their new username.
Create an account in AD that has read-only rights to your directory. Set the password to never expire. You will use this account later for the integration.
In CUCM, go into Serviceability and make sure the "Cisco DirSync" service is activated on the Publisher server.
Also in CUCM, navigate to the administration page and do the following:
Go to System > LDAP > LDAP System and Check the box to enable Synchronizing. Confirm the LDAP server type and attribute for User ID is accurate. This is typically Microsoft Active Directory and sAMAccountName respectively.
Go to System > LDAP > LDAP Directory
Click Add New
Give it a name (whatever you want).
Put in the Distinguished Name of the AD integration account you created earlier. For example, if you created an account called ciscoldap in the Service Accounts OU in the abc.com domain then it would look something like this... CN=ciscoldap,OU=Service Accounts,DC=abc,DC=com
Enter the password for the account.
Enter the search base. This can be a specific OU where your users exist, a parent OU which contains other OUs which contain all of your users or the entire domain. If you do the entire domain then in the abc.com example you would specify DC=abc,DC=com.
Select the option to perform a sync with AD on periodic intervals. The lowest interval you can set is every 6 hours.
Select either the telephonenumber or ipPhone field to be used for the user's extensions. This will be whatever you decided and populated in AD in an earlier step.
Add your primary and any backup domain controllers and ports. If they are just domain controllers and you are not using SSL then specify port 389. If they are also global catalog servers then you can do port 3268.
Click Save and Click the "Perform Full Sync Now" button.
I recommend that you also use LDAP for authentication as well so you only have one username and password to remember which is all controlled by AD. To add this do the following:Go to System > LDAP > LDAP Authentication.
Click Add New
Check the box to use LDAP Authentication
Add the same Distinguished name, passwords and user seach base that you used for your integration account earlier under the synchronization section. Also add the same primary and secondary LDAP servers and ports you used earlier.
Click Save
You can go a step further and create a filter to only pull in the users within the search base you specified and apply that. For example, maybe only pull in users that have their ipPhone field populated. Let me know if you have any questions on that or any of the above.
I hope this helps!

Canon iP4200 - an error occured while trying to add the printer Error -9672

It seems I am one of the hoard of folks unable to add my printer (in my case, a canon iP4200) to the Airport Extreme network.
I have repaired permissions
I have reinstalled the lastest driver
I have read through the discussions
The airport was sold in part because "You'll be able to print to your USB printer with it."
Is there an Airport expert out there who can fix this?

What firmware does your base station have?
What version of the Canon driver are you using?
iFelix

Foxfire error message that I already have the application running. But when I check the system manager, I don't see that Foxfire is running.

Often, when I click on Foxfire, I get an message saying that Foxfire is already running and I have to close it to start it agai. But when I look at the sys manager (ctl/alt/delete) it does nopt show that Foxfire is running.

Sounds like it is hanging when you exit and later try to restart Firefox.
* How to stop the running Firefox process
** In Task Manager, does firefox.exe show in the '''Processes''' tab?
** See: http://kb.mozillazine.org/Kill_application
**Windows 7 Task Manager: http://www.techrepublic.com/blog/window-on-windows/reap-the-benefits-of-windows-7s-task-manager/2576
* What may cause Firefox to hang at exit
** http://support.mozilla.com/en-US/kb/Firefox+hangs
** http://kb.mozillazine.org/Firefox_hangs
** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
* You may need to try Firefox Safe Mode
** You may need to use '''Safe Mode''' to locate the problem: http://kb.mozillazine.org/Safe_Mode
**Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''before''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''one at a time''' until the problem reappears. '''You MUST close and restart Firefox after EACH change''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
** See the following for more information
*** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
*** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
*** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting
'''Other issues that need your attention'''
The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.
*Next Generation Java Plug-in 1.6.0_23 for Mozilla browsers
**'''''Security update version 1.6.0_24 released 2011-02-10'''''
#'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Since installation of 8.1.2 I get an error message each time I use the browser--"a problem occurred with this webpage so it was reloaded". I have iPad 2.

I Have an iPad 2. Since download of iOS 8.1.2 every time I use the browser--usually Google --this message comes up "a problem occurred with this webpage so it was reloaded". Touchpad also seems slow and jerky.

Its not necessarily freezing - just being slow to build.
May have something to do with this being a secured site - I an giving Opera a test run & this part of the apple site does not go into compressed load - but the non-secure parts of the site do. The issue may be that some sites like apples just have too much unimportant junk on the screen because the designers are on an internal network a few offices away from the server and never see all the issues that com up.

TS3694 what is error 3014.It is listest in the apple error directory but with no **** solution provided by apple!!

Similar Messages

Maybe you are looking for