TS3992 Trying to commence first ever Storage & Backup but it fail and messages "The last backup could not be completed." "Last Backup-Never". Any clues?
Trying to commence first ever Storage & Backup but it fails and massages "the Last backup could not be completed" "Last Backup - Never".
Welcome to the Apple Community.
You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up
Similar Messages
-
Please Help..
Trying to restore / update ipod 3rd generation - keep getting error message - The ipod touch could not be restores. An unknown error occurred (-1).Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The "device may need service" means a hardware problem. in that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My iPhone 3GS 16gb, is stuck in restore mode, downloaded and tried to do a restore multiple times. Keep getting an error The iPhone "iPhone" could not be restored. Unknown error occured (-1). Cannot get it out of restore mode, keeps rebooting!
I have tried to hold the "home" and "power" button to reboot
I have tried powering it off
I have tried, to unplug the cable, hold the "home" button and then plug it in.
Can't check the SN or warranty, cause it is stuck in restore mode.
Is the hard drive gone? Should there be something replaced.http://support.apple.com/kb/TS3694#error1
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
Usually this is caused by your antivirus or firewall blocking iTunes access to the Internet. It can also occur if the phone is jailbroken or if the computer you are using was ever used to jailbreak an iDevice. -
Why do I get "The last backup could not be completed" Last backup: 5/4/12 at 11:16 am every time I try to back up my iphone 4s? I also get a message that my iphone hasn't been backuped in 32 weeks?
Welcome to the Apple Community.
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable. -
Hi, I'm trying to set up my Time Machine, but I get this message: The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. how to resolve?
Did you reboot the TC? That is always the first step.
Reboot the whole network if that is not enough.
If you still have issues.. come back to us but generally the best way is to factory reset the TC and start over.
We need a bit more info on the whole network layout and what OS you are running. What model TC you have?? -
I cannot install iTunes 10.6.3 on Windows7 (64 bit). I keep getting the following message: "The installation package could not be opened. Verify that the package exists and that you can access it or contact the application vendor to verify that this is a valid Windows installer program." Anybody have a solution?
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?
What version of iTunes are you using? The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
B-rock -
I am trying to change country to US for iTunes on my iPad. After I select US in account setting and press NEXT I get message: "Cannot connect to iTunes" and then "The iTunes Store could not process your request. Please true again later". Help please.
downloaded the updated iTunes and that did nothing. I then went through the form about $ very VERY carefully and discovered one field left blank. Once that was filled in, everything worked and I now have my free app.
-
i was trying to update my iphone 3gs ios but in iphone it is saying that iphone could not be activated because the activation server is temporarily unavialable so now what should i do now plz help mee
usually that means the iPhone was hacked to unlock it from the original carrier
-
How do I view and manage certain files that I have stored in iCloud? I know that I can delete an entire backup, but is it possible to delete certain photos/contacts/notes etc. from that backup?
No.
-
When I attempt to purchase gems from Clash of Clans, I get a message that my purchase could not be completed. I have ample funds available for the purchase, and have tried changing my account and downloading app in the new account.
This has only been occurring for the last 2 months...Contact iTune Support
http://www.apple.com/support/itunes/contact.html -
I am trying to watch the movie Taken but everytime i try and watch it a message pops up that says "the operation could not be completed"
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
When trying to restore or update my Iphone 4 it errors out with message:..."could not be restored because the firmware file is not compatible." How do I resolve this?
Ask him if he has 'jailbroken' the ipod touch. Some jailbreaking firmware resets it to Ipad firmware and so it is very difficult to restore as itunes simply doesnt recognise it for what it is. It's Apple's solution to try and stop mass jailbreaking.
-
Do u have to have a computer/pc to use home sharing? I have apple tv not sure if it's 2nd or 3rd generation or even if it's first generation. My laptop is broken and in the shop, can I run my apple tv off my iPad?
If you have home sharing turned on in the settings of your apple tv and your iPad you can AirPlay from your iPad to the apple tv. When you play a video there is a tv icon on the right side of the play/pause/fwd/rwd icons. Click that and choose your apple tv. Your apple tv and iPad must be on the same network.
-
Why am I getting this message when I try to open my ITunes: "The Itunes app could not be opened. An unknown error occurred (-50)."?
http://support.apple.com/kb/TS3694#error14
These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Maybe you are looking for
-
Hi, I am trying to schedule the indexing of a report in explorer and I am getting the below error. I am using an administrator user id for this. Failed to update information space Internal error com.businessobjects.datadiscovery.persistence.exception
-
How do I transfer my photos from one external hard drive to another?
I have a 500 GB eternal hard drive that I use as storage for all my photos. My iphoto uses this drive as the default library for my iphoto. I have run out of space on this drive. I have a new 1TB external drive that is mac OS formatted that I would l
-
"as of" irregularities...
Hi. I am running the following query - SELECT * FROM analyst AS OF TIMESTAMP TO_TIMESTAMP('2011-03-30 15:00:00', 'YYYY-MM-DD HH24:MI:SS'); where I received the results as expected (same as current). I then ran it with the date 2011-03-29 and again re
-
Strip multiple @domain used in username on AD Integration with Cisco ISE?
Hi there , How to strip multiple domain suffixes from username through ISE with AD being used as external Identity Source. Username is being used in username@domain format. Cisco ISE 1.2 patch 4 introduced strip prefix or suffix @domain realm from us
-
Reading of attributes of characteristics in APO DP
I am using APO DP V5. Within DP, I have a characteristic with associated navigation and display attributes. Is it possible, using macro function, to read these attributes so that they can be used in macro coding? Thanks, Bob Austin.