TS4079 siri keeps saying connect to internet: but I am connected?
I have turned Siri both off/on several times. I am also connected to internet, but everytime I use Siri it says please connect to internet
I have Norton Internet Security 2005 and have not had problems except with CDDB with a proxy server.
Assuming you are using the Norton forewall, but something should work with other firewalls.
As suggested, try turning off NIS briefly and see if you can connect then. If you can try the following:
Make sure you have all updates.
Go in to the firewall settings - configure programs.
Delete references to itunes and quicktime. You may find them listed under Apple.
Restart the computer.
Then go into the firewall and manually configure these programs:
In Program Files\iTunes - iTunes.exe and iTunesHelper.exe
In Program Files\Quicktime - QuicktimePlayer.exe, qttask.exe and QTInfo.exe.
In fact for me the automatic configuration worked fine, but doing it manually seems to have worked for some people.
Another thing that can cause connectivity problems, go into Internet Explorer Tools>Internet Options>Connextions>LAN Settings and make sure that "Automatically detect settings" is checked.
Similar Messages
-
I can't update my iPad because it keeps saying I'm not connected to Internet but I am connected
Connect iPad to iTunes and Check For Update (tap to enlarge image)
-
siri keeps saying she cant take any request right now please try again in a little while she was working fine when i first talked to her please help
You may want to try and reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing, Wall Paper, Sound etc will be reset -
I use my computer everyday in our office and have no issue connecting to the internet/wifi, but when my boss comes in and tries to connect it doesn't work. It tells her she has internet, but won't connect to the wifi. We've tried a few different tactics(the basic ones I've seen on here), but nothing seems to be working for us. My computer automatically connects to our wifi.
Just recently the Airport Extreme has started with the blinking amber colored light on the front, which I believe means something is wrong? Can anyone help us figure out what's going on and why we can't get my boss' computer to connect as it should?
Thank you!Here's an update:
Now the light is not blinking. It's a solid, consistant green. I don't know if it helps to narrow it down or anything, but I just figured I'd mention it. -
Says can't connect to internet but actually is connected
I kept getting an error message "Cannot connect to internet" So after going round and round for almost an hour - reseting, reconfiguring network, trying ethernet cable instead of wifi etc. I chose "continue without internet" and bingo it's working now. so I must have a magic ATV that works without internet
And by the way during all these shenanigans two other computers on the same network were connecting to the router and internet fine.Hi vazandrew, thanks for trying to help but actually the ATV is connected to the internet as I am able to continue watching the show I was watching when it fell. And just to confirm that it is not streaming from any local device, I went and selected a brand new show that I have never watched and it streamed fine.
So there is something strange going on with my ATV.
I am listing below the exact sequence of events for you to analyse:
Watching a show and in the middle of it, it dropped out and some kind of error message came up saying something like "Sorry your show can not continue due to no internet connection" (don't remember what exactly).
Went over to my macbook and it was still connected fine - opened several new browser pages, refreshed them, etc.- all fine
Went back to ATV and went to settings > menu > general > network etc. and re-configured but kept getting message something like "you are connected to wi-fi/router GVT-blah blah" (ours) but you have no internet connection.
Went back and reconfigured network several times, logged in/out of user account several times but still no joy.
Went to settings > menu > general > reset all, reconfigured everything to factory default, logged back in, then got the dreaded endless spinning wheel with an eventual message saying something like "could not set date and time"
Went and changed to configure date /time manually but couldn't find the field to do so so went back and changed back to auto.
Also changed region from US to Brazil
Spent about an hour doing all of the above several times and also checked my macbook several times to confirm internet connection was all good, including a speed test.
Tried ethernet cable connected directly from router to ATV, it showed as connected to router on ATV but still kept giving me message of no internet.
Disconnected ethernet cable and switched back to w-fi and reset and reconfigured all again but same message saying something like "connected to router, but no internet - continue without internet?
Finally in desperation, I chose "Continue without internet"
The screen then went to the Netflix one month free sub option that we subscribed to when we first got the ATV, which I chose and went through the iTunestore account log-in.
Bingo..all working again supposedly with no internet.
Finally just to confirm 100% that the ATV is not streaming via another local device, I shut them all down and the ATV is still streamed fine.
And as I said above, I am able to continue streaming the interrupted show and also chose other Netflix shows that I have never watched before (for now).
If you ask me, very buggy! -
I'm connected to Internet but can't connect to app store?
I'm connected to the Internet but then can't connects to app store. Why is that?
Did any one set restriction to App Store?
Settings>General>Restrictions -
Connection error. Connect to Internet but I'm connected
Hi there,
I help customers downloading ebooks with ADE. I have a customer who can't open his ebook and hi gets this message:
"connexion error: ADE can't connect to the activation server. Make sure you are connected to internet"
He assures he is connected to internet.
Anyone has any advise, suggestions on how to work this around?
I'll really appreciate your help.I help customers downloading ebooks with ADE. Brave person ... Good luck
ADE messages are sometimes not quite appropriate.
I suggest trying the following in this order.
Order chosen for easiest first, rather than most likely to work first.
~~~
(1) Remove any old authorizations (ctrl-shift-D to ADE, cmd-shift-D if on Mac).
Restart ADE, and try to authorize again.
(2) (Temporarily) disable any firewall and try again.
(3) (Temporarily) disable any antivirus and try again.
(4) Try the older but more reliable v1.7.2.
I feel like a broken record suggesting this one; but it has proved the solution in lots of different situations,
including this one. http://forums.adobe.com/message/5051168
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editions.html
The forum software is sometimes corrupting the link above. There shouldn't be a blank in 'editio ns.html'. The following redirects to the same page: http://tinyurl.com/diged172 -
Airport not connecting to Internet, but I can connect directly
Hi - My Airport Extreme (4th Generation) suddenly popped up and told me it was reporting problems. I cannot remember exactly what the issue was, but I think it was something with the IP address. (sorry, I know that's not helpful.) Since then I have talked with my ISP, found I can directly connect via the ethernet, and wiped the Airport back to factory settings. Any suggestions? I can connect to the Airport, but it doesn't go out to the Internet. Again, it's not the ISP, because I can connect with the Ethernet. Thanks!
A little more info - I remembered the error had to do with Bridge mode, telling me I had to either turn it on or off. And the current issue is that it does not have an IP address??? But I see an IP address on there - it's not pulling it from the modem??? Thanks!
-
Safari cannot open webpage "not connected to internet",but i am connected
I am connected to the internet by inputting the key in the back of my router. when I type the webpage I want in the Safari search box ,I get a message that safari cannot open the page and that I am not connected to the internet. what to do?
Hi policiaacostado,
That is never fun if you cannot get online with your iPad. To resolve the issue, take a look at the article below to get you back up an running with Wi-Fi on your iPad.
If your iPhone, iPad, or iPod touch won’t connect to a Wi-Fi network
https://support.apple.com/en-us/HT204051
Take it easy,
-Norm G. -
Connected to internet but won't connect to imessage.
Hi
The wi-fi service provider is imagine and e-mail, surfing the web all works fine. When i try to hook up imessage the ipod seems to search for ages and then states there might be a problem with my connection; even though i can still downlaod apps, e-mail and use the web. I read that i need to change my DSN number to 8888 and then try to re-connect. Once i do this i go back into DNS and put back in the original number!!!!!!
Does anyone know the solution and if i do need to change my DNS# connection what effect will this have on other applications.
thanksIt may be a DNS issue. In the address bar, enter just the following:
173.194.73.99
and hit enter
That's the direct IP address for one of Google's servers. If it's just a DNS issue, that should still take you directly to Google's home page. It's easy enough to fix if that's the case, but I'd rather not get into it until you can confirm if the above works. -
I have a iPad 2 I brought it yesterday and it has an update for iOS 6.1 but it won't let me download it. It keeps saying your no longer connected to the Internet but I'm connected to my wifi. Can you help please
Hi Blueandpink,
If you are running iOS 4, you will need to update the iPad via iTunes on your computer (can't do OTA updates unless you have iOS 5 or higher).
If you have a first generation iPad, unfortunately you won't be able to update to iOS 6 (iOS 5 is the highest you can update to on the original iPad).
If you are on an iPad 2, 3, or 4th generation with iOS 5 and it still isn't working, try holding down on both the Sleep AND Home buttons at the same time for about 10-15 seconds (ignore the red slider button). Keep holding it until the Apple Logo appears. When you see the Apple logo on the black screen, let go of the buttons. This “reset” fixes a lot of iPad issues and might work to resolve the update issue. Try updating again.
Hope this helps!
~Joe -
My iPod is up to a 4.1 ios, and it won't update to a 5.1 which I need for some of my apps for school. It keeps saying that my internet connection is bad; but, it works just fine. What do I need to do?
If you get a network timeout error, then disabling the computer's security software duirng the download and update usually resovles that error.
If that is not the error what is the wording of the error message.
Note that only a 3G or 4G iPod can go to iOS 5. A 2G iPod can only go to iOS 4.2.1 -
ipad is frozen. game i was playing shows small in center of screen. does not turn off. siri says not connected to internet, but i cannot get ipad to do anything...frozen.
Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
The brand new I pad air has just a grey screen and Siri says "connect to internet" but obviously no graphics to enable to do this
Frozen or unresponsive iPad
Resolve these most common issues:
• Display remains black or blank
• Touch screen not responding
• Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
Cheers, Tom -
Every time I'm trying to update my 4s with iOS 6.1.2, keeps showing message that I'm not connect to Internet, but I am, anybody experiencing the same issue???? Help!
I was able to update my iPhone 4S to 6.1.1, BUT :: I could not update to 6.1.1. from my iPhone. I received the same message as everyone else saying that my iPhone was not connected to the Internet, which is was. (I was able to access my mail etc. via Internet.)
Instead I connected my iPhone to my computer via ITunes via the cable. I then downloaded the software on my computer and updated the iPhone from the computer. While I was downloading the software on to my computer, which is only connected to the Internet via ethernet, the same message as above appeared on my iPhone about not being connected to the Internet. I pressed cancel. The software continured to download on to the computer and then on the iPhone.
Maybe you are looking for
-
Hello I am trying to query a MS Access database using the servlet container provided by tomcat. Sometimes the query has no problem in executing itself...but I keep getting a general error on my tomcat display: java.sql.SQLException: General error at
-
ECC - SXI_MONITOR - How to resend Only System Error Not Application Error Automatically ?
Hi All, is there any way to re-send or re-process only system error which occured due to QRFC_SHORT_DUMP. We should not re-send Application Errror. I have tried the program RSXMB_RESTART_MESSAGES , it restarts all System Error and Application Error.
-
JVM 1.5.0_15 crash on RHEL 5 with JBoss 4.3.0
Hello, we had a JVM crash on our new production architecture. Here are the specifics : OS : Red Hat Enterprise Linux Server release 5.2 (Tikanga) Kernel : 2.6.18-92.el5 CPU : 2x Dual Core Xeon 5160 @ 3.00GHz MemTotal: 8046252 kB JVM : java version "1
-
SAP Controls tutorial code problem
Hello all, I'm working on a SAP tutorial and I can't get this piece of their code to work. We're on version 4.7, basis version 6.2. This is a link to the tutorial and here is a segment of code that does not pass the syntax check. http://help.sap.co
-
I Am looking for parameterisation documents and UAT test cases of all modules,
Hello Team, Flexcube 12 version test cases, I do have them but looking for flexcube old version. If any body can share it will be help full and there will be some meaning in become a member of this group. my id is [email protected]