TS4118 My icloud does not want to back up from my Ipad
I have updated my Ipad to 5.0.1, registered with icloud but my documents from my Pages does not want to sync with icloud at all. Nothing is visible on my icloud account when I log in online.
Everything has been checked again and again. I have also registered icloud with my iMac. Not so sure what could be the problem.
Anyone out there, please kindly assist.
In itunes, click on the name itunes on top left, click preferences, click devices, then you will see all of your backups.
Similar Messages
-
HT5621 my icloud does not want to reset to my current apple id . Why is this happening?
My icloud does not want to recognize my current apple ID. it will not reset from my previous ID. How can i reset my Icloud preferences??
You have to sign out by clicking the 'Delete account' button first, and before you do that turn off 'Find My iPad' if it's running.
-
I went to iCloud and my mail doesn't recognize my password but even worst my iTunes does not want to open because it says my library is blocked somewhere on a hard disk where I have no access ...
HELP HELPTo confirm, your existing mail client isn't communicating with your existing and remote mail services at Dreamhost? Which mail client are you using (Apple mail?), and how is mail on the client set up?
It would initially seem that your client is still referencing the server, either for its inbound or outbound mail. (And I'm not sure how unplugging the server helps here, unless there's some sort of a configuration issue, or a duplicate network address or such.) This would usually be something within the configuration of the mail client.
The Mac OS X Server is significantly easier than the many other servers and server operating systems I've dealt with over the years, but it requires reading the manuals and/or some knowledge of networking and of server environments.
Small shops and home folks without the time or inclination to "spin up" on these server areas can be well-served with some help initially configuring the server. Servers are different from clients. Stuff that you're implicitly used to using when you're running a client -- the DHCP server, for instance -- are what the servers provide you with.
As for Mac OS X Server and particularly if you head outside of the default settings and sequences and off into the customizations, which is what has happened here, you might want to engage some assistance. Not just for the direct and obvious initial set-up sequence, but also for getting you set-up and started with backups and other such tasks. Before you get too deep in here and get too much underway and too much saved on your disks, do seriously consider getting somebody in to help set this box up for you.
Mac OS X Server is not "no IT", but it is rather closer to "less IT" than most. Particularly once you get it configured and running. -
My iphone 3gs suddenly turned off and does not want to turn back on.
My iphone 3gs all of sudden turned off and does not want to turn back on.
Charge it with a wall charger for 15 minutes, then hold the HOME and SLEEP buttons until an Apple logo appears, about 10 seconds.
-
I recovered a back up from my time machine via a wired connection after getting the 'white screen of death'. Now Time Machine does not recognise any back ups on the time machine when connected wirelessly and wants to do a first back up of the whole machine. How do I get my mac to recognise these older back ups? It connects to the wifi network the time machine creates fine, with the same name and password.
I recommend the following.
1. Reset the TC to factory.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
2. Rename the TC to SMB standard.
That means short names.. 2-20 characters but less than 10 is excellent. eg TCGenx (use number for x that is actual generation of the TC)
No spaces.
Pure alphanumeric. No apostrophe.
3. Ensure IPv6 is set to link-local..
Do the same thing for ethernet if that is used.
4. Manually mount the TC disk in Finder.
Use Go in the top menu.. connect to server.
Type in
AFP://TCname.local (where TCname is your new short name for the TC and local is default domain .. it helps using the domain I found).
You will then find the computer either can or cannot find the network resource.. if it fails something else is wrong with the actual network and you will need to fix that.
It will request the password if it is found.. password is public by default unless you changed it.. type in the password and check to keep it in your keychain.
5. Delete current TM setup and redo it with the newly named TC.
See A4 here. http://pondini.org/TM/Troubleshooting.html
If your backups cannot be found, try B6 again, now that you actually know that the disk has been properly discovered. -
iCloud does not back up iMac HD...seems crazy why not...Appl passing up money for backing-up Mac's? What is the best Cloud back-up solution and can a Cloud Clone be made?
I had a problem where it would not backup any more. Some of the diagnostics that they had me do were:
1. Repair Disk on the TM drive
2. Try backing up by clicking/holding the TM Icon and choose Backup Now
If failed:
3. Reboot Leopard
4. Try step 2 again
If Failed:
5. Disk Utility repair permissions
6. Try step 2 again
If Failed:
7. Log out and login as administrator
8. Launch Console from the Utilities Folder
9. In the System Log Search for "Time Machine"
10. Use that to help figure out problems and call Apple Care -
My iphone 5c switched off and does not want to switch back on?
Hi all,
I need some help please... my phine switched off and does not want to switch on.
I have charged it on my computer for at least an hour yet there has been no luck. It is only about 3 months old.
Regards
NakkieThank you Razmee209,
This solved my question, I tried it earlier but I guess I did not hold it in long enough.
Thank you so much.
Regards
Nakkie -
HT1689 how can i undisable my ipod touch when itunes does not want to connect?
My brother's ipod touch 4th generation was cracked on the screen and was not able to see anything after a while. We finally fixed it and now it says "IPOD DISABLED CONNECT TO ITUNES". We tried connecting it and itunes does not want to connect because it says that the ipod has a passcode and until we unlock it, it will do it. So we our stuck and on top of that, the ipod's power button does not work, so we waited to uncharge the ipod so we can try to connect it again and it still won't do it. We do not know what to do, and we cannot afford to buy a new one. Is there a solutiong for this? Thank You.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
iCloud does not backup. On my iPhone 4S it states "There was a problem completing the backup. Please try again later." after attempting to Back Up Now. I've spent far too much time trying to discover a work around to this issue, and I've been on this forum and others in search of answers, to no avail.
Before receiving my iPhone 4S in the mail on October 17th, I upgraded my iPhone 3GS to iOS 5 on the morning of the 15th. In using iCloud on that device, everything "just worked" as we're told that it should. As this problem has become apparent with my 4S, I have gone back and disabled iCloud on my old 3GS, but this has not solved my problem.
I've found many other customers in my searches that have had this same, or similar, issue. Some users claimed that turning off and on iCloud solved their problem. Some claimed that restoring their iPhone to factory settings and then reclaiming backed up data solved their peoblem. Some claimed that creating a new Apple account, using it to backup through iCloud, and then logging into their original Apple account solved their problem. None of these solutions worked for me.
Some users have speculated that this is some kind of corrupt account issue. I'm beginning to feel this way as well.
I'm not really interested in going to the Genius Bar, because frankly I've been more effective on my own and I haven't been impressed with their knowledge in the past. I am willing to call AppleCare to try to get some flag raised in Apple's Engineering department as a last resort, but I'm curious how widespread this issue is and if anybody has had any luck with this route yet.I don't want version and I want to go back to iOS 7.1.2 please tell me how to do it.
You can't. There's no going back to a previous iOS on an iPhone. Apple doesn't support it. Have you taken the phone into an Apple store Genius bar to have them take a look at it? Be sure to make an appointment before going in. -
please asking some help
my ipod touch felt down and since show me the appel sign and does not want to go further but it's charging correctly. when I connect it to the computer it's ask for a passcode that i dont remember.Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked.I have an ipad mini. From one moment to another a document that was created and used on pages app ( on the ipad mini) does not want to open ( When pressed it states " document cant be opened). How can I make this document open again?
I have tried back ups and restoring, resetting, and even updating the pages app. And nothing has worked. -
M phone is ded and does not want to turn on.
okay I have an iPhone5c,my iPhone is dead at the very moment, I thought maybe it was just dead, I tried to charge it anyay it does not want to turn back on,at all the screen was just black most of the time it comes out as the little battery with the red charging and the bottom is the plug , although my charger is broken but it always comes out as the stuff just said but im holding the slep button to turn on as always it does not work CAN YOU PLEASE HELP ME NOW!!!!!!!!!!!!!!!I have ios 8.1 update the latest update.
If ti has been connected to a known-good charger/cable/outlet, and left to charge for at least 30 minutes, then try this. Disconnect it from the charger. Press & hold the Home button & SleepWake buttons firmly for up to 1 minute, watching for an Apple logo to appear. If it does, then let go of the buttons and let the device reboot. If it does not, then contact Apple for support options. Your device may have a hardware failure and need to be serviced/replaced.
-
i'm trying to install iOS 5.0 but getting message that my computer does not have enough space to backup my iPad and continuing will result in loss of all media on iPad. an option seemed to be backing up on iCloud, but i think you have to have iOS 5.0 to install iCloud.
how do i install iOS 5.0 without losing anything on my iPad?If you really do not have enough space on your HDD for a backup of your iPad, you do not have enough space at all. Free up at least 15% of your HDD, in any case more than 0.8GB for the iPad update.
Make backups on an external disk.
After freeing up enough space, try again. -
Changed my Apple ID email, but ICloud does not recognize my new login, only my old one (which is now non-existent) and requires the password to do anything. Everytime I go onto the ICloud page it shows my old email and requires the password, but I can't exactly type in a password because that won't work. I can't find a way to change my email or delete ICloud.
If the old ID is an earlier version of your current ID, do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device). -
Windows does not want detect my DVD drive
I do have HP Pavilion dv7-1133cl after uisng Windows Recovery my Windows Vista does not want to recognize DVD drive.
When I have followed all advices what I have read here on chats I have find message:
Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code39)
I do not know what to do with this problem.
I will be really grateful for any help or advice what to do with it.
Regards
GregoryThis is usually caused by a known software issue and happens across the board will all computer manufacturers due to a conflict with media burning/ripping applications...
You can either run this file , go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
Manually delete the registry entries
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
UpperFilters
LowerFilters
Step 1: Start Registry EditorStart Registry Editor
Start Registry Editor...type "regedit" into the run box on the start menu.
Step 2: Delete the UpperFilters registry entry
In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
Expand SYSTEM, and then expand CurrentControlSet.
Expand Control, and then expand Class.
Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
In the details pane of Registry Editor, on the right side, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?
Step 3: Delete the LowerFilters registry entry
In the details pane of Registry Editor, on the right side, click LowerFilters.
Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
Exit Registry Editor.
Step 4: Restart your computer
Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.
Maybe you are looking for
-
I've just lost my ipad yesterday...i changed my old email with the new one but i'm not complete the registration for the itunes yet...and shortly i lost my ipad...now i'm trying to login to icloud to find my lost ipad but this message appear "your a
-
Releasing credit sales order confirmation
Hi We are using credit limit check. If the customer has credit issues, the sales order will get retained and the confirmation is lock. The issue is that after the released of the sales order the confirmation is not being unlock and the sales order is
-
In CR 2008 , there is an option to export group tree as bookmarks in pdf. In my report , for some groups items , the group header is not shown in the report. Even if the group header is not shown , these items will be listed in group tree, As per my
-
About 1 year ago I helped to set up Firefox on my mother's computer. It worked fine until a couple of days ago. Now it no longer connects to the internet. The system is Windows XP, service pack 3. Internet Exporer does connect to the Internet on this
-
Can destination ASCP server be a fesh install?
We have 32-bit Linux OLTP 11.5.10 and would like to use HP-UX PA_RISC 64-bit destination server. Can this server be a fresh install of 11.5.10 with the latest ASCP rollup, or does it have to be a clone (export/import) of the OLTP system? Thanks.