TS4522 Attempting to burn to DVD with no picture files I cannot get share to progress beyond 66%fon a short 2 minute video.

I cannot get share to progress beyond 66% when trying to burn to DVD a 2 minute video without pictures or titles.

The encoding process is probably complete but the actual burn job action hasn't initiated.
What often works is to go to the DVD Share dialogue window and under Settings>Menu Background, click the Add button.When the next window opens hit cancel.
To test whether it's wnow working, in your project, select a short section with the Range tool. Then share to DVD, choosing Hard Drive as Output Device.
If that test is successful, chances are good your full project will work as well.
Russ

Similar Messages

  • How do I correct the error; "PluginCoder error: no pligin DLLs" when attempting to burn a DVD with Premiere Elements 13

    I just upgraded to PE 13 - removed PE12 prior to installing PE13 and now I cannot burn a DVD on my Win 7 Pro 64bit PC.  In my first attempt at burning a DVD PE 13 did not see the DVD burner - drive "z:".  I have a WD MyBook 4TB USB HD and had Security configured which created a Virtual CD on the drive.  I disabled the virtual CD and rebooted.  This time PE13 recognized the DVD burner but when trying to burn a DVD I received the No DLLs message and had to cancel the burn.  I tried the burn again and the DVD burner was no longer recognized.
    I then removed PE13 and reinstalled it - no errors during the install.  Tried again and same result - no DLLs.
    Any help would be greatly appreciated.
    Thanks for your time,
    Mark

    PRE_help
    For Premiere Elements user, I would make note that the presets for burn to disc cannot be customized by the user within the program.
    a. The second thread that you pointed rkclarke36 to does talk about resolving this issue by changing the burn to disc frame rate from
    24 fps to 30 fps. But, that was for Premiere Pro, not Premiere Elements. In Premiere Pro, can the user really customize an Adobe burn to disc
    preset?
    For Premiere Elements
    If the burn to is to DVD disc for DVD-VIDEO, the user is
    confined to two frames rate, 25 interlaced frames per second or 29.97 interlaced frames per second. But, he/she cannot change the frame rate
    within the preset.
    If the burn to is to DVD disc for AVCHD DVD, the user again meets different presets, but cannot change the frame rate within the preset. For Premiere Elements 13 burn to AVCHD disc, the presets are
    Premiere Elements 13
    H.264 1440 x 1080i NTSC Dolby
    H.264 1440 x 1080i PAL Dolby
    H.264 1440 x 1080p NTSC Dolby
    H.264 1920 x 1080i NTSC Dolby
    H.264 1920 x 1080i PAL Dolby
    H.264 1920 x 1080p NTSC Dolby
    Except for the two 1080p presets with frame rate of 23.976 progressive frames per second, the other presets all have a frame rate of 29.97 interlaced frames per second NTSC or 25 interlaced frames per second.
    b. Mark has not yet offered the details of the Timeline content (video and/or stills) being taken to burn to DVD-VIDEO or AVCHD DVD. So, frame size as per your first mentioned link might be an avenue to pursue. I would include that with all my testing of Premiere Elements 4 to 13, I have not gotten this particular dll error
    with any oversized stills.
    ATR

  • I have an ipad 2 and want to put my dvds onto the ipad. i have converted the dvd into an mpeg4 file but cannot get it to open in i tunes does anyone know how i do this?

    i have an ipad 2 and want to put my dvds onto the ipad. i have downloaded handbrake and converted the file into mpeg4 file but i cannot get the file to open in itunes

    I have the same problem , i've converted my videos to mp4 , by using different programmes and tried to open them in itunes but it didnt .
    Some people suggested the following although it didnt help me , it might help you
    One suggested to paste the videos that you want in automatically add to itune (  go to your music folder m then click on itunes , then itunes media , and you will find it there )
    Others suggested to o to the ontrol panal , then programmes and features m then lick on quick time (. Or itunes) then Change then repair
    If it didnt help. And you find another method m please let me know
    Thank you

  • Dynamic Link (Adobe Premiere Pro to Encore) issues with burning a DVD from the project file

    Hello,
    I am running Adobe Suite CS 5.1 on my Mac:
    2.8 GHz Quad Core
    6GB Memory
    I've been having issues with a few projects; using Dynamic Link, directly from my project in Premier, to send them to Encore:
    When attempting to burn a DVD, Encore will 'hang up' and not burn; I rarely burn to DVD, usually I'm always encoding for web, and just always use the 'default settings' in Encore.
    A few things to note:
    *In my project I'm using MOV files, from a Canon 7D, and MP4 files, from a Sony EX-1. 
    *I am working off of 3 separate hard drives; very large projects with over 5TBs of media files.
    *I noticed that after inserting a DVD, it caused one of my hard drives to eject; this happened once, as far as I know.
    *This only happens when I use Dynamic Link to send to Encore, via my Premiere Pro project file.
    *My Project settings are always: XDCam HD-1080p/24p
    Please help.
    Thanks

    So you must downrez at some point in the workflow. Some users have problems and/or think they get better quality out of direct PR/AME exports than using DL for this purpose.
    I would test the workflow by creating three short test sequences - one with a clip from one camera, a second from the other, and a third with both in a sequence using the same settings you are using in your edit. I would use the "drag a clip" to the new item method for making each of the first two sequences. By short I mean 30 seconds to 2 minutes with a mixture of still and action.
    Export using whatever method you pick of those recommended, but use CBR 8 instead of VBR etc. Bring the resulting files into Encore. Yes, look at the files exported on the computer, and look at Encore preview, etc, but also burn to a disk and watch on multiple TVs. There are lots of issues in best quality.

  • I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed.Help

    I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks

    Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting NVRAM / PRAM
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • I keep getting the error: "Menu Encoding Error... need to stop burning process" when I attempt to burn a DVD

    Very frustrating... I'm trying to burn a DVD and I've done it about 100 times before.  I've checked the mapping for errors and found none.  When I attempt to burn a DVD, the error mentioned above appears after a few minutes.  I've tried to update all software, restart the computer, and use other DVRs.  Any adivice would be most helpful.  Thanks in advance!

    Hi
    To be able to help we need more exact information and that You try out every suggestion as precise as possibly.
    First step is as always - separate encoding from burn-process - By Save as a DiskImage from File menu in iDVD (as suggested by Old Toad)
    If problem persists in encoding part then
    • iDVD got a corrupted pref file - very common problem
    • Space on Start-Up (Mac OS) hard disk get's too low to be able to store the temp. files from iDVD and Mac OS (can not be stored elsewhere)
    • Material feed into iDVD - can not be digested as strange video codecs and audio files in .mp3 .wma and other exotic formats.
    iDVD pref file - to find out if this is the problem - Easiest and most secure way is to - Create a new User-account and log into this. Re-try iDVD - If it now works OK then the problem is very close to 100% in the pref file. Either do Your work in the new Account or go back and trash the old pref file.
    Space on Start-Up HD - I never go under 25Gb to let iDVD and Mac OS run OK
    Material - Here You need to supply specific information
    • Video - from what Camera - in what codec - If You can open a video file in QuickTime-Player then here open Inspector and read Video format/Codec: nnnnnnnn, size and frame rate - and tell us
    • Audio - All audio I use is in .aiff 16-bit 48kHz (as from my miniDV Camera or 44.1 kHz as from Audio-CDs all other is converted to this. iTunes is even more problematic. Here I collect all needed audio into a new PlayList and this I BURN out as a standard Audio-CD (.aiff) (never .mp3) and in my movie projects I use the files from this CD.
    Yours just trying and Guessing Bengt W

  • Burning a DVD with Final Cut Pro 10 stops at 95%, why ?

    Burning a DVD with Final Cut Pro X stops at 95%, why ?

    Stops completely? Mine stopped at 95% for quite a few minutes then finished.  This is usually the time in the process where the lead out is being burned and it will not show progress for some time.  If it is taking more than 10 to 15 minutes from that point you may have another problem.
    stephen

  • HOW to Burning A dvd with 5.1 audio AND WATCH IT AT HOME ?

    I have had I nightmare with the compressor application trying to burn 5.1 audio and the film together had no luck . I wonder what does a guy do to listen to 5.1 files in his home cinema set up ? I know that I can bounce the 5.1 audio into the film in logic but can I burn a dvd with the 5.1 audio and film and take it home and listen to what I have done in a non studio environment ?
    Would much appreciate some help on this cause frustration is not the word to discribe me going nuts for like 5 hours trying to figure out how that non musical program works .
    Thanks for any feedback ...

    Ah, got it.
    Since you have Compressor I would guess you also have DVD Studio Pro. Anyway a quick movie showing how to do it. Drag the m2v and audio into the asset bin (you will see it in the lower left of the movie) then it goes through the steps. Note the audio and video streams are not the same length, I just threw it together quickly to show you. Of course menus can be fanbcier and all the rest and there may be some gotchas in the details, but it will generally work. Also make sure to set a First Play for the disc. Usually it is good to have a small couple seconds of black frames or warning on a track before jumping off to the next thing, and you can set the Track to be first play in this case if you like. try to use good media (DVD-R/+R) brands like Taiyo Yuden, cheaper media can cause issues.
    http://www.dvdstepbystep.com/quick.mov
    Well there are alot of things to take into consideration, but that should give you a good jump start

  • Will iDVD burn a dvd with surround sound?

    I have a quicktime movie with surround sound I'd like to burn to a DVD. Will iDVD burn this and keep the surround intact?
    If not, will the latest Toast do this?
    If not, are there any other OSX apps that will burn a dvd with surround, preferably a cheap one? I know DVDSP will do it, but that's overkill for burning one disc.
    Power Mac G5 quad 2.5 and Mini duo 1.66   Mac OS X (10.4.7)  

    Hey don't get me wrong, dolby digital surround is way
    better than ProLogic, but give the dudes credit that
    came up with ProLogic in the pre-dolby digital days
    some credit, it is "true" surround.
    Sure, it is surround, but it's not the same as having four separate channels. There are limitations to what you can encode, and you can end up with unintended issues on both stereo and surround material. It was a cool invention that was a big improvement on stereo, but it just isn't the same as actually having the channels. It just isn't "four true distinct signals" - it simply can't reproduce everything four true distinct signals can.
    I should have said I need actual discrete channels.

  • Burning a DVD with m4v music videos purchased from iTunes

    Instead of buying Apple TV, I would like to burn a DVD with my collection of music videos purchased on iTunes. Most of them are Protected MPEG-4 video files, having the extension .m4v
    My question what I need to do to burn a DVD with these files, without loosing the quality and maintaining the video's aspect ratio? I don't mind to upgrade my iDVD programme to the version of 2008 and QuickTime to the version of Pro, if that will help to resolve my problem. Currently iDVD 6 does not support the protected m4v files, hence I can't burn them into a DVD for watching on TV screen. Your advice is highly appreciated.

    This is from the Terms of Service page for iTunes. The bottom line is that you can't burn the videos to DVD.
    10. Purchase or Rental of Apple Content
    Usage Rules
    Your use of the Products is conditioned upon your prior acceptance of the terms of this Agreement.
    (I edited out the sections that do not pertain to your question.)
    (vi) You shall not be entitled to burn video Products or ring tone Products.
    The complete document can be found at http://www.apple.com/legal/itunes/us/service.html. If you live in a country other that the United States, you will have to get the document that applies to you.
    Message was edited by: Glo H

  • How can I reclaim memory/storage so I can burn a DVD with iDVD?

    How can I reclaim memory/storage so I can burn a DVD with iDVD?

    Move your iPhoto Library and/or your iTunes library to and external HD that is formatted OS X Extended (journaled) and run them from there. Be sure to try the libraries on the EHD before you delete them from the boot drive.
    This should easily free up the 25 GB minimum needed for iDVD to create and burn video DVD efficiently.
    Follow this workflow to help assure the best qualty video DVD:
    Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image  menu option. This will separate the encoding process from the burn process.
    To check the encoding mount the disk image, launch DVD Player and play it.  If it plays OK with DVD Player the encoding is good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.

  • How can I increase resolution when burning a dvd with elements 11 premiere

    How can I increase resolution when burning a dvd with elements 11 premiere
    I am trying to generate a slide show DVD....the pictures on the TV are poor quality

    Welcome to the forum.
    As Steve points out, a DVD-Video is set in resolution, to 720 x 480 (for NTSC), in either Standard 4:3, or Widescreen 16:9. That is as good as it can get, and is not a limitation of PrE, but of the DVD-Video specs, which were written a long time ago.
    The best that one can get is to play that DVD-Video on an up-rezzing DVD player, or most BD players, that also have up-rezzing, to an HD TV monitor. Those players have dedicated chips, JUST for up-rezzing.
    Then, and per Peru Bob's questions, I attain the ultimate Still Images to DVD-Video, by doing my Scaling in Photoshop, and using either the Bicubic Sharper, or Bicubic Smoother Scaling algorithms. I Scale my Camera RAW Images to match my Project's Frame Size, and Crop, where necessary to match the Aspect Ratio of my Images, to the Aspect Ratio of the Project, i.e. if going to a 16:9 Widescreen, I will lose some pixels top and bottom, but I account for that, per my asesthetic.
    Note: some PrE users insist that the Scaling in PrE is as good as Photoshop's, but my critical eyes point to using PS. Also, I do NOT use JPEG, which is a lossy, compressed format, and will Save_As PSD from Photoshop, for ultimate quality.
    Good luck, and please let us know the pixel x pixel dimensions of your Images.
    Hunt

  • I have created an iMovie file and have created an iDVD menu file. I am now ready to burn a DVD. But my superdirve is broken. If I put my files on a mac without iMovie or iDVD, can I burn my DVD with Toast 11?

    I have created an iMovie file and have created an iDVD menu file. I am now ready to burn a DVD. But my superdirve is broken. If I put my files on a mac without iMovie or iDVD, can I still burn my DVD with Toast 11?

    no need for Toast ..
    tell iDVD to create a disk-image
    transfer dmg to othe Mac
    launch the Disk Utility, burn that dmg .......

  • Error when tryying to burn ny dvd with Encore

    I am getting a error when tryying to burn ny dvd with Encore
    PCG "baseball_and_more" has an error at 00;00;00.
    Internal software error:0% line basball_and_more -PGC Info name == baseball_and_more ref == Bpgc, time 00;00;00
    Anyone know what this is due to?
    If I add another clip before the base_ball_and_more then I get the same erro but at 16:45:0I 4
    This seems related to changing the M/N field in the adobe media encoder. If I use defaults while encoding in premier
    I dont get them error in Encore. But if I change the defaults ( hope fully to get better DVD results) I get the error.

    First, back on the main page http://forums.adobe.com/community/encore enter
    pcg
    into the SMALL forum search window on the right and read previous discussions
    Second, try exporting from Premiere as DV AVI type 2 and give that to Encore... use the Automatic encoding setting and let Encore make the decision on what will best fit on a DVD

  • What's the best output format to burn a dvd with?

    what's the best output format to burn a dvd with? I normally select a h264, but i don't know which preset i should use (between "match source high bitrate and hd1080...)

    A DVD is Standard Definition... export using the MPEG2-DVD preset and import the TWO (audio and video) files in Encore for authoring
    CS5-thru-CC PPro/Encore tutorial list http://forums.adobe.com/thread/1448923 will help
    The bottom section of the link above has several Adobe links, and other information, on downloading Premiere Pro CS6 and the bundled Encore CS6, and the TWO ADDED downloads for the Encore library content, to author a DVD or BluRay... and the tutorial list includes learning how to use Encore... pay particular attention to the picture in reply 3 at this link - https://forums.adobe.com/thread/1516173

Maybe you are looking for

  • Output is not as good as the preview

    This post is tied to the others, although I know from experience that older posts don't get answered especially if there are already replies....So this is a new one. First, to clarify things, I already encoded my project (64 min 34 sec) in Compressor

  • Is it possible to install ios 5 on a 2nd gen touch,i would love to give this to my daughter for her to play games with and none of the games are supported

    is it possible to install ios 5 on a 2nd gen touch,i would love to give this to my daughter for her to play games with and none of the games are supported

  • How to animate a combo box?

    I have a combo box that get's populated from a web service. This may happen in the background as the user is doing other tasks. I would like the combo box to jiggle or bounce up and down when it receives it's data. Can anyone offer some insights into

  • Update to Iphoto 9.4.2

    I've just downloaded the upgrading to iPhoto version 9.4.2. When i'm trying to open iPhoto, I get these messages "Photo Library must be updated to work with this version of iPhoto" and "Photo library will not be readable by previous versions of iPhot

  • Is iOS 6.0.1 effects home button?

    Is iOS 6.0.1 will effects home button? my iPhone 4 home button seems not really sensitive now and need to press few times then only able to exit the application. How to check is the home button issue?