TS5376 R6034 Error / Solution / Continuing Problem

A short time back I accepted to receive the update to iTunes on my PC. Right after receiving it, I get the R6034 error. I've gone through all of the recommended steps to resolve the problem, to no avail.Very dissapointing. Now I can't trust AAPL. Any ideas? At this point I've had to uninstall iTunes to stop the poppup stating the R6034 Error, so no longer able to have iTunes on my PC. Yes, I have Apple machines and devices as well. Strangely enough, I was just forced to go thru a long and drawnout process of changing my Apple ID, which I've had for 15+ years plus changing my PW (ok, I can get past this one) But no iTunes on my PC? Very dissappointing. Really odd: Trying to send this message I'm having to select the product(s) that are tied to my ID -- It only allows one product and for this purpose I thought it best that I put in iTunes, and it isn't available as a selection -- It has to be ME -- what the heck am I missing here? HELP

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

Similar Messages

TS5376 R6034 error

I've done everything in the troubleshooting (checked .dll's, uninstalled, rebooted, downloaded and installed new) and I am still getting the R6034 C Runtime library error and the Windsow 1114 iTunes did not install properly error. Is there anything else that can fix this?

Click here and follow the instructions. You may need to uninstall and reinstall iTunes and all related components multiple times.
(99673)

HT1349 I get an R6034 error (Microsoft Visual C++ Runtime Library) when I try to start iTunes on my HP. Any suggestions on how to resolve this problem?

When trying to open iTunes I get an R6034 error for the iTunes.exe. It appears to be caused by Microsoft Visual C++ Runtime Library. I'm using an HP DOS machine. When downloading an update to iTunes, an iTunes Error 7 (Windows error 1114) appears stating that iTunes did not install correctly. Does anyone have a suggestion for resolving this situation?

This is one link. Please go through Microsoft and find a safe repair to the problem.
http://www.errorrepair.com/?t202kw=runtime%20error%20r6034%20fix

TS5376 version 11.1.4 R6034 error - followed instructions, still broke

Version 11.1.4 R6034 error - followed instructions, still broke
What do I do after un-installing, rebooting, deleting DLLs, and re-installing 3 times and I still get the same error?
Instructions say to uninstall all related iTunes/apple products. Why do the instructions not provide a list of related products?
Does related products mean Bonjour too? QTMovies.dll looks like "Quick time" should I un-install that too?
Maybe apple could test their code before asking everyone to upgrade to the latest version.
Maybe the code that does the install could check for prerequsits before trashing a working version of itunes.

Follow the instructions in this user tip. You may need to run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99468)

Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

Event Viewer reporting continuous problem with Firefox

I had to disable McAfee Site Advisor because if enabled I could not use the back and forth arrows on the browser in some instances. In trying to track this problem down I discovered there is a continuous problem reported in Event Viewer with this information:
The entry <C:\USERS\CINDY\APPDATA\LOCAL\MOZILLA\FIREFOX\PROFILES\PV0GC0WS.DEFAULT\CACHE\_CACHE_003_> in the hash map cannot be updated.
Context: Application, SystemIndex Catalog
Details:
A device attached to the system is not functioning. (0x8007001f)
Can anyone please help with this?

The error could be something trivial, it will depend really on what problems you are having, and I note you have made a few other posts.
* One article you may find useful is [[Basic troubleshooting]]
* Also see [[Safe Mode]] & [[Troubleshooting extensions and themes]]
** Note when using safe mode normally do not make changes in the first dialogue Window you see just click on the continue button (Unless you really do want to reset something)
** Also note whilst Safe Mode does disable plugins, it will not always stop all external software interacting with firefox .
A basic principle of troubleshooting is to reduce as many unknown interactions as possible, so in the case of Firefox disabling or removing as many extras as possible.
If you are determined to check what is in the firefox caches then use ''about.cache'' simply type it into the location bar and hit return, it is relatively user friendly and shows masses of info about what is cached, there is also an [https://addons.mozilla.org/en-us/firefox/addon/cacheviewer/ add-on cacheviewer] Even without the add-on you may be able to figure out what the item is, and whether or not it is updating.
I do not even use Vista, but presumably an event log entry may not necessarily relate directly to Firefox use.
''"in the hash map cannot be updated.
Context: Application, SystemIndex Catalog "''
I would hazard a guess that the above message may relate to disk indexing; if so it will possibly have nil impact upon Firefox operation.
I do recall problems being mentioned on this forum about Site Advisor and Firefox, and note some versions are on the [https://www.mozilla.com/en-US/blocklist/ blocklist] for Firefox 4. If you have problems with SiteAdvisor it would be worth ensuring you have the very latest compatible release of Site Advisor.

Every time i download something i get this error message "Fireclam Problem"

Every time i download anything i get this problem once the download is completed.
Fireclam Problem
The program executable (null) could not be found.
Make sure that ClamAV/ClamWin is installed properly and check the Fireclam settings
I downloaded the add-on Fireclam, it didn't help.
Please HELP how do i make this error message stop popping up. Thanks :)

Hi, Kmkriel,
I did some research on the add on and all that came up are the crashes for that add on. Please disable the add on and see if the error message continues.
After reading about the add on, it seems that ClamAV/ClamWin needs to be installed in order for the scan to take place before the download.
If this continues when the add on is disabled please do a virus scan. Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Post Moved Continual-problem-with-SMTP-passwor...

Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Continual-problem-with-SMTP-password-being-blocked/td-p/...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Post Moved to Other BB Queries http://community.bt.com/t5/Other-BB-Queries/Continual-problem-with-SMTP-password-being-blocked/td-p/...
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

TS1424 Runtime Error! R6034 Error 7 (Windows error 1114)

Today (27/01/2014) I installed the latest available iTunes and iCloud Control Panel updates, restarted my laptop etc, now when I click to open the iTunes programme, a Windows dialogue box appears saying "Runtime Error! R6034 An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information." When I click 'OK', another dialogue box appears saying "iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 1114)"
I am reluctant to uninstall iTunes as I have a lot of music on there from CDs that I no longer own and with nearly 3000 songs in my library I do not want to have to try and get everything back on there. Can someone please give me some guidance as to whether this is a fault with my laptop or an error with Apple, and if all my music will be wiped by uninstalling and reinstalling iTunes. Thanks.
Ally

Hey there AllyBaxter,
It sounds like you have installed the latest iTunes update and now you cannot launch the program without this error message. First, before any troubleshooting is done you can use this article to find out the location of your iTunes library and back it up:
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
I would next use the troubleshooting from the following article to troubleshoot the iTunes error message you are getting:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Uninstalling iTunes should not compromise your library, but having a back up of your library is always a good idea.
Thank you for using Apple Support Communities.
All the very best,
Sterling

Microsoft Visual C++ Runtime Library R6034 error with CS6

When I start up the 64bit version of Photoshop CS6 I get the R6034 error. After about 20 times to delete the error message 64bit CS5 starts. This does not happen with the 32 bit version. How do I fix this?

Thanks for following up.
There were no error messages that I saw during the installation process.
The error message comes up when I start the 64 bit CS6 Photoshop the "CS6
logo" starts, but then freezes when the R6034 error windows start. Each
error wiindow closes with a click, but then another one opens. This goes on
for 18 to 20 windows, Then CS6 opens and seems to work fine, including all
the plug-ins from Nik, OnOne, etc.
My Dell desktop system is Win 7 Ultimate, Service Pack 1, 12gb ram and 64
bit OS. The exact same issue occurs on my Dell laptop with is also Win 7
Ultimate, Service Pack 1, 16gb and 64 bit Operating System.
The 32 bit CS6 Photoshop opens with no errors on either PC.
I re-installed the laptop from the Set-up.exe. The were no errors during
the re-install but the same problems occurred after the re-install. The
same R6034 errors occurred, but the CS6 went ahead and started with all the
the plugins and actions remained without any additional steps.
The CS6 64 bit seems to be functional, (whew) but it is a pain to go
through all the error windows. I don't know what if there is anything that
won't work because of the C++ Runtime Library difficulty.
Chuck Bruce

Solutions for problems with QuickTime files in After Effects CC (12.0)

We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components.
Please read that post and let us know here on this forum thread if you have any questions or comments.
Also, please let us know if the proposed solution works for you.

Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   ???                                     0x04981f90 0 + 77078416
1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

I attempted to install the new version of itunes and I keep getting a R6034 error

I attempted to install the new version of Itunes and I keep getting a R6034 error. What do I do?

Hi davemac123,
Thanks for visiting Apple Support Communities.
I recommend removing and reinstalling iTunes using these steps:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
You can find the article with these steps and more information here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Best,
Jeremy

How to fix r6034 error application(itunes) load of visual c++ runtime library incorrect

I received a R6034 error which states application attempted load of microsoft visual c++ run time library incorrectly while updating itunes application. I have uninstalled itunes and attempted to reinstall it several times but each time I get the same result - R6034 error. i have restarted the pc and then retired the install process to no avail. how can i correct this problem??
I need itunes to work

@RAcuna1
It's better to consult Apple support
http://www.apple.com/in/support/
The problem maybe due to corrupt package from their download.
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows 7 x64, Outlook 2010 and iCloud configuration - error "Outlook configuration problem"

I'm running Windows 7 x64
I had iCloud 1.x working with Outlook 2007 x32. A few months back I upgraded to Office 2010 x64, which (of course) broke the iCloud integration. I've waited for the "fix", and have now tried to get it working again with iCloud 2.11. I've tried repairing, I've uninstalled/reinstalled iCloud, I've set different default profiles, I've changed mail accounts...nada.
No matter what I do, when I get to the point of opening up the iCloud configuration and try to set up Mail, Contacts, Calendars, etc. I immediately get the following error:
"Outlook configuration problem.
Setup can't continue because Outlook isn't configured to have a default profile. Check your Outlook settings and try again."
Any suggestions?

Hi,
Regarding the issue here, Please first take an attempt to repair your Outlook personal folder file (.pst) :
How to repair your Outlook personal folder file (.pst)
We might also take a try to reinstall the Windows Search feature:
If your installation of Windows Search got damaged, we can remove and reinstall it in the following way.
Control Panel-> Programs-> Turn Windows features on or off
Deselect: Windows Search
Press OK and wait until the installer is finished.
Reboot your computer.
Repeat the above steps to enable it again.
If still have troubles with outlook search, we may need to take a look in the Event Viewer and look for any errors logged by the “Search” or “Microsoft Outlook”, And if they are not helpful to you, please post them back in together
and we will help you troubleshoot it.
In addition, we might consider seek help in the forum below regarding outlook issues:
Outlook IT pro discussions
http://social.technet.microsoft.com/Forums/office/en-US/home?forum=outlook
Hope this may help
Best regards
Michael Shao
TechNet Community Support

So is it just me, or is Mavericks a bust? My MBP runs way hotter now. I don't have time for trial and error solutions. Is Apple offering a way to downgrade back to Mountain lion? I want out of Mavericks ASAP.

So is it just me, or is Mavericks a bust? My MBP runs much hotter since the upgrade. Why do I need ot sit around watching Activity Monitor, manually controlling my fans, and deleting extensions that I enjoy using. Don't even get me started on the Quicktime/Mov issues. I had none of these issues on Mountian Lion. Searching these forums, I see it's not just me. Why would Apple release a new system w/o peoperly testing it on MBPs?
I don't have time for trial and error solutions. I've tried the obvious ones. No help. Is Apple offering a way to downgrade back to Mountain lion? Or better yet, a Mavericks update that adresses these problems? As of now, I want out of Mavericks ASAP.
My processor is 2.6 GHz Intel Core i7.
8 GB 1600 MHZ DDR3 memory.
13inch MBP purchased ust over a year ago- 1-13.

jonny a wrote:
Nope, it'a not just me, see above. And yup- I'm backed up, But I don't own a Mountain lion install disc. That's why I was posting here in the first place. Thanks
Nobody owns a ML install disc - ML was only ever distributed as a download from the Mac App Store.
If you have a Time Machine backup, you can boot into recovery mode and restore from your Moutain Lion TM backup volume. If you have a system clone, then you can boot from the clone, and just clone ML back onto your internal drive.
Going back to your previous installation from a backup should be trivially simply if you have the backup in hand.

TS5376 R6034 Error / Solution / Continuing Problem

Similar Messages

Maybe you are looking for