TSM component

Dears,
There are 2 features for TSM component, one is Max Shelf Life, another is Max Floor Life.
Since we have some components which only concern Max Shelf Life, they don't care Max Floor Life.
Can we modeling component which only set Max Shelf Life? So that SAPME system only handle Max Shelf Life.
Then, user doesn't need to check out/In component whenever want to use the component, but system will check the expired date of component if it's expired than Max Shelf Life.
Thanks!

Hi,
You can consider having a customization around assembly that would automatically check out components.
I have not thought through all use cases, but it appears that you could also automatically check out all time sensitive components even on inventory receipt (assuming your floor life is equal to the shelf life). Once you do that floor life is tracked. This is a customization too.
Thanks,
Mikhail

Similar Messages

Is it possible to extend the TSM component's expired date?

Dears,
Is it possible to extend the TSM component's expired date?
Thanks!

Definitely it is possible, however, it is unlikely this feature would be implemented in ME 5.2 but rather in further releases.
And someone should contact e.g. Consulting team to "submit the request".
Regards,
Sergiy

Is it possible cummulative_floor_life for TSM component

Dears,
Since customer's requirement is whenever user put back TSM component to control environment, the cummulative floor life should be reset, they just want to control user can not take out the component from control environment over the max floor life every time, when user put back, the floor life should be reset.
Is it possible to set like this?
Thanks!

Hi,
I don't think so because that feature seems to have been included into the original design but moved out afterwards for some reason. Possibly it will be added in ME 6.0.
So, what I can think of is direct change to database, however, as usually it is not recommended.
Regards,
Sergiy

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it

With TSM adware removal tool I was able to remove unknown software that was making ads pop up when using Safari. So the y don't pop up anymore. The problem now is that when I open safari It is still downloading websites and after awhile it freezes the browser. I have to constantly go to Safari Preferences to remove them and then the browser will start working again. What can I do to stop this?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Problem with inputText in my custom component

Hi, I have a custom dataTable component that I'm trying to get to work. It has to be a custom component because dataTable doesn't support rowspan, colspan, multi line headers, and a rendered attribute for rows. The problem is, that when I wrap the column tag inside my row tag then the method for the inputText tag never gets called in the UPDATE_MODEL_VALUES phase.
I'm starting to think that JSF doesn't support 2 levels of tags between the inputText and dataTable. I'm hoping that someone can tell me what I have wrong with my components.
Here is the JSP snippet.
<cjsf:rptTable>
     <cjsf:data id="dataTable1" value="#{allAuthUser.tableRows}" var="myTableRow1">
          <cjsf:row>
               <cjsf:col>
                    <h:inputText id="tableTestFld" value="#{myTableRow1.testFld}" size="5" maxlength="5"/>
               </cjsf:col>
          </cjsf:row>
     </cjsf:data>
</cjsf:rptTable>Here is what it renders. It looks to me like everything renders fine. So I'm guessing that there is something in a component that is causing JSF during the life cycle to not be able to process correctly.
<table>
     <tbody>
          <tr>
               <td><input id="tblmaintForm:body:dataTable1_0:tableTestFld" name="tblmaintForm:body:dataTable1_0:tableTestFld" type="text" value="" maxlength="5" size="5"/></td>
          </tr>
          <tr>
               <td><input id="tblmaintForm:body:dataTable1_1:tableTestFld" name="tblmaintForm:body:dataTable1_1:tableTestFld" type="text" value="" maxlength="5" size="5"/></td>
          </tr>
          <tr>
               <td><input id="tblmaintForm:body:dataTable1_2:tableTestFld" name="tblmaintForm:body:dataTable1_2:tableTestFld" type="text" value="" maxlength="5" size="5"/></td>
          </tr>
     </tbody>
</table>Note: If I leave off the row tag it renders the same way except of course the <tr> and </tr> tags are missing. If I do this, then the backing method for the inputText tag is called and everything works fine. Why doesn't it work with the row tag in place?
Here are the components:
public class UIRptTable extends UIComponentBase {
     public UIRptTable() {
          setRendererType("tblmaint.rptTableRenderer");
     public String getFamily() {
          return "javax.faces.Output";
public class UIRptTableData extends HtmlDataTable {
     public UIRptTableData() {
          setRendererType("tblmaint.rptTableDataRenderer");
     public String getFamily() {
          return "javax.faces.Data";
public class UIRptTableRow extends UIOutput {
     public UIRptTableRow() {
          setRendererType("tblmaint.rptTableRowRenderer");
     public String getFamily() {
          return "javax.faces.Output";
public class UIRptTableCol extends UIColumn {
     public UIRptTableCol() {
          setRendererType("tblmaint.rptTableColRenderer");
     public String getFamily() {
          return "javax.faces.Column";
}Here is part of the faces-config file in case you need it.

<component>
     <component-type>tblmaint.rptTable</component-type>
     <component-class>com.monsanto.ag_it.fieldops.aim.tblmaint.component.UIRptTable</component-class>
</component>
<component>
     <component-type>tblmaint.rptTableData</component-type>
     <component-class>com.monsanto.ag_it.fieldops.aim.tblmaint.component.UIRptTableData</component-class>
</component>
<component>
     <component-type>tblmaint.rptTableRow</component-type>
     <component-class>com.monsanto.ag_it.fieldops.aim.tblmaint.component.UIRptTableRow</component-class>
</component>
<component>
     <component-type>tblmaint.rptTableCol</component-type>
     <component-class>com.monsanto.ag_it.fieldops.aim.tblmaint.component.UIRptTableCol</component-class>
</component>

<render-kit>
     <renderer>
          <component-family>javax.faces.Output</component-family>
          <renderer-type>tblmaint.rptTableRenderer</renderer-type>
          <renderer-class>com.monsanto.ag_it.fieldops.aim.tblmaint.renderer.RptTableRenderer</renderer-class>
     </renderer>
</render-kit>
<render-kit>
     <renderer>
          <component-family>javax.faces.Data</component-family>
          <renderer-type>tblmaint.rptTableDataRenderer</renderer-type>
          <renderer-class>com.monsanto.ag_it.fieldops.aim.tblmaint.renderer.RptTableDataRenderer</renderer-class>
     </renderer>
</render-kit>
<render-kit>
     <renderer>
          <component-family>javax.faces.Output</component-family>
          <renderer-type>tblmaint.rptTableRowRenderer</renderer-type>
          <renderer-class>com.monsanto.ag_it.fieldops.aim.tblmaint.renderer.RptTableRowRenderer</renderer-class>
     </renderer>
</render-kit>
<render-kit>
     <renderer>
          <component-family>javax.faces.Column</component-family>
          <renderer-type>tblmaint.rptTableColRenderer</renderer-type>
          <renderer-class>com.monsanto.ag_it.fieldops.aim.tblmaint.renderer.RptTableColRenderer</renderer-class>
     </renderer>
</render-kit>I sure hope that someone can help me out. Please let me know if you need any additional information.
Thanks,
Ray

Hi, Ray!
1) I was trying to put a button in the column header (for sorting) and I couldn't get that to work. That involved the >colhdr tag. I got that to work but I don't remember the fix. I'll look it up and reply back with that when I can.Dealing the first part of your trouble, you need NOT a custom component.
I have looked through the implementation of RepeaterRenderer, as you advised me, and found that the multi-header possibility is included in the implementation of dataTable control.
The code below is the part of source of repeater.jsp with only change:
<d:data_repeater>  <h:dataTable>
And it works fine.
<h:dataTable id="table"
binding="#{RepeaterBean.data}"
     rows="5"
value="#{RepeaterBean.customers}"
var="customer">
<f:facet name="header">
<h:outputText value="Customer List"/>               <!� First Header row -- >
</f:facet>
<h:column>
<%-- Visible checkbox for selection --%>
<h:selectBooleanCheckbox
id="checked"
binding="#{RepeaterBean.checked}"/>
<%-- Invisible checkbox for "created" flag --%>
<h:selectBooleanCheckbox
id="created"
binding="#{RepeaterBean.created}"
rendered="false"/>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Account Id"/>               <!�Second Header row -- >
</f:facet>
<h:inputText id="accountId"
binding="#{RepeaterBean.accountId}"
required="true"
size="6"
value="#{customer.accountId}">
</h:inputText>
<h:message for="accountId"/>
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Customer Name"/>               <!�Second Header row -- >
</f:facet>
<h:inputText id="name"
required="true"
size="50"
value="#{customer.name}">
</h:inputText>
<h:message for="name"/>
</h:column>
<h:column>
<f:facet name="header">                    <!�Second Header row -- >
<h:outputText value="Symbol"/>
</f:facet>
<h:inputText id="symbol"
required="true"
size="6"
value="#{customer.symbol}">
<f:validateLength
maximum="6"
minimum="2"/>
</h:inputText>
<h:message for="symbol"/>
</h:column>
<h:column>
<f:facet name="header">                    <!�Second Header row -- >
<h:outputText value="Total Sales"/>
</f:facet>
<h:outputText id="totalSales"
value="#{customer.totalSales}">
<f:convertNumber
type="currency"/>
</h:outputText>
</h:column>
<h:column>
<f:facet name="header">                    <!�Second Header row -- >
<h:outputText value="Commands"/>
</f:facet>
<h:commandButton id="press"
action="#{RepeaterBean.press}"
immediate="true"
value="#{RepeaterBean.pressLabel}"
type="SUBMIT"/>
<h:commandLink id="click"
action="#{RepeaterBean.click}"
immediate="true">
<h:outputText
value="Click"/>
</h:commandLink>
</h:column>
</h:dataTable>
You may have a look at HTML source to prove that dataTable is already what you need:
<table id="myform:table">
<thead>
<tr><th colspan="6" scope="colgroup">Customer List</th></tr>
<tr>
<th scope="col"></th>
<th scope="col">Account Id</th>
<th scope="col">Customer Name</th>
<th scope="col">Symbol</th>
<th scope="col">Total Sales</th>
<th scope="col">Commands</th>
</tr>
</thead>
<tbody>
2.) The second trouble is still unsettled as previously. Right now I have different task at my job, and I can�t continue investigation of this problem.
But when you find smth., please let me know. I�ll be very grateful.
Regards,
Oleksa Stelmakh

Mini dvi to Component Video adapter !

Help !
Where Can I Find "mini dvi to Component Video adapter" ?
Help !

"there is no such thing in apple store"
I MAID,
Begging your pardon, but I just tried the above linked Search Results, and what you seek is apparently on the list, as the search was performed exactly as you specified. You can read the description of the various items for sale and tell us what is different about the one that you need. That way we can perform a new search for you, or, in the alternative, you can search for yourself. If the Apple Store doesn't have what you want, search CompUSA.

Hi, I have an iMac running Mavericks that I am trying to hook up an older HDTV as a second HD monitor through the minidisplay port to component 3 color RCA. HDMI is not an option with this set. I have SD working, but need to find a HD conversion set up.

Presently I have a mini display port>VGA adaptor, running to a convertor box I picked up that handles S-video out, which is working fine for SD. I also have a VGA to Component Video (5 wire RCA) adaptor cable. Connecting Component adaptor dircetly to the mini display adaptor doesn't seem to work, neither does plugging it into a VGA port on the SD convertor box. I am guessing there is another convertor box out there that will help me make the transition from mini display to Component. Even if it means having a handful of adaptors plugged in. does anyone know where to find such a wonderful and magical device?
Thanks

Your setup works fine for DV, because you used a DV deck and most likely DV footage. But now you are working with 720p HD footage (what format, BTW? HDV, dvcpro HD?). That same setup won't work for monitoring HD. Now you need an HD box or card to send out a proper HD signal. And since you have an older G5, you won't find any current solutions. You'll have to look at used capture cards that are PCIx. Or you and look at the Matrox MXO, that connects to the computer via a monitor connection. DVI.

HT201335 I want to hook up an Apple TV device to my TV but only have one HDMI connection that's already used for my HD cable box. Can I connect the Apple TV device to my TV that has s video, PC in and component jacks unused ?

I want to hook up Apple TV but my One HDMI Jack on my TV is already connected to my HD cable box. My TV has jacks for s video, component, and PC in jacks.
Can I use one of them to connect to Apple TV with some type of cable to my newer I-pad ?

Here are the Apple TV outputs.
What other outputs does your HD cable box have?
Apple TV (2nd and 3rd generation): Guide to ports and connectors
http://support.apple.com/kb/HT5713
 Cheers, Tom

Why do I need to declare "defaultButton" ? (In a component form part of view stack)

After doing some research and some help from FlexGuy in another thread, I realize that I need to make sure I have custom components initialized before accessing parts of the component. Just recently I was thrown for a long time when I tried to first click on a form field that was part of a component in my view stack, I'd get:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at mx.managers::FocusManager/focusInHandler()[C:\autobuild\galaga\frameworks\projects\framew ork\src\mx\managers\FocusManager.as:601]
With the debugger it's occuring in the focusInHandler method of FocusManager.as: (apparently _defaultButton is null.)
// restore the default button to be the original one
                if (defButton && defButton != _defaultButton)
                    defButton.emphasized = false;
                    defButton = _defaultButton;
                   _defaultButton.emphasized = true;
This prompted me, on a whim, to delcare a defaultButton:
<mx:Form id="empForm" defaultButton="{submitButton}">
which refers to my submit button:
<mx:Button id="submitButton" click="submitEmployee()" label="{submitLabel}"/>
My question, is why is this necessary? In some examples I don't see this declared at all, but I seem to need it? (I'm calling creationPolicy="all" to make sure my components are initialized but I still seem to have to this defaultButton declared?)

It's a way of proving that you are able to purchase content from that country's store i.e. that you have a valid billing address in it
From Why can’t I select None when I edit my Apple ID payment information? - Apple Support :
If you changed your country or region
When you change the country or region of an existing Apple ID, you must provide a payment method and update your billing options. If you want to remove your payment method after you change the country or region, you can change your payment information to None.

IE Script error when double clicking on a view in Abap Webdynpro component

Hello experts,
I am running mini SAP trial version 2004 with Internet explorer 7.0 and also installed gui patch 23.
I am making a sample application in SE80 and when double clicking on a view in Abap Webdynpro component I get following error:
<b>Internet Explorer Script Error</b>
An error has occured in the script on this page.
Line: 1
Char: 1
Error: 'wdp_show_menu' is undefined
Code: 0
URL: http://satellite5200:8000/sap/bc/wdvd/painting.html?_vdrespkey=EOJ6V1JQMX0VLTQ7AP6DQM64Y&_vdframe=painting&sap-client=000
Do you want to continue running scripts on this page?
Thanks in advance.
Bhupendra

Hi Bhupendra,
If you are seeing this error in the Se 80 editor , i guess you can ignoire that ...While running the application it will not show any error.
Thanks
Anzy

Create a new view in a enhance component

Hi All,
I want to create a new view for sales order and quatation in a component BP_factsheet.When i craete new view ,it is asking about some value like model node, bol entity, higher level, bol realtion.after that is is asking context node ,bsp application ,custome controller and view type.How can i get these value .when i create a new view then have to add these view in run time repositry under a window or not?
Thanks in advance....
Vishwas

Hello Vishwas,
You might be interested in knowing how to customise the new UI to add a new view using the enhancement concept.
Please refer to the published document on the service marketplace:
http://help.sap.com/saphelp_crm60/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
refers to the link at
service.sap.com/okp
Inside this go to:
SAP CRM 2006s: Learning Map for Technology Consultants
wherein you can find the cookbook to perform similar operation in detail.
SAP CRM UI Cookbook
I hope this helps.

Creating a new view in a component

HI,
I am trying to create a new view in a BSP component using the wizard. But the context nodes are not getting created. Its throwing up an error - "View not copied with wizard; processing not possible".
What could be the problem ? Pls help.
Regards,
Aravind.

Hi Arvind,
Before posting error, please search for it.
Here is what i found here in 2007 forum itself.
I guess you have not enhanced your component and your view.
Without enhancing the component it is not possible to add a new context node.
Here is a very helpful, follow it and the the other link within this thread,
both are very useful in this regard.
Web Client Context Node Enhancement
Thanks & Regards
Shiven

Error While Adding a Software Component

Hi All,
While adding a software component in the SLD, i am getting the below error. Can anybody please suggest me the possible reason for the same.
Storing changes to persistence failed. Please check both your J2EE engine and database are in a healthy running state. (Error: CIM_ERR_FAILED: [NWMss][SQLServer JDBC Driver][SQLServer]Could not allocate space for object 'BC_SLD_CHANGELOG' in database 'X7A' because the 'PRIMARY' filegroup is full.)
Also i would like to know what is a software unit in a SLD??
Thanks in advance,
Kulwant

Is there any DC checked in?

Error while opening a component in ACC

I am getting error while trying to open component in ACC. I can the component is running, but when tried to open it (either thro Open component or by double clicking on it) am getting the following error.
Any idea on the cause of this error?
Server exception:
java.lang.ClassNotFoundException: com.package.MyComponent
at atg.nucleus.SimpleComponentState.readObject(SimpleComponentState.java:593)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1849)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:306)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:155)
at atg.rmi.context.ContextualSkeletonImpl_Stub.invoke(Unknown Source)
at atg.rmi.context.ContextualStub.invokeSkeleton(ContextualStub.java:121)
at atg.security.proxy.UserSessionProxy$SessionStubHandler.invoke(UserSessionProxy.java:180)
at atg.rmi.context.ContextualStub.invoke(ContextualStub.java:95)
at $Proxy2.getConfigInfo(Unknown Source)
at atg.ui.component.model.ComponentClientImpl.getConfigInfo(ComponentClientImpl.java:352)
at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:214)
at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:198)
at atg.ui.component.ComponentBrowser.editSelectedComponent(ComponentBrowser.java:748)
at atg.ui.component.ComponentBrowser$EditAction.actionPerformed(ComponentBrowser.java:735)
at atg.ui.common.DevTree$MousePopupAdapter.applyDefaultAction(DevTree.java:266)
at atg.ui.common.DevTree$MousePopupAdapter.mouseClicked(DevTree.java:289)
at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:253)
at java.awt.Component.processMouseEvent(Component.java:6266)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4247)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Client exception:
java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.lang.ClassNotFoundException: com.package.MyComponent
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:178)
at atg.rmi.context.ContextualSkeletonImpl_Stub.invoke(Unknown Source)
at atg.rmi.context.ContextualStub.invokeSkeleton(ContextualStub.java:121)
at atg.security.proxy.UserSessionProxy$SessionStubHandler.invoke(UserSessionProxy.java:180)
at atg.rmi.context.ContextualStub.invoke(ContextualStub.java:95)
at $Proxy2.getConfigInfo(Unknown Source)
at atg.ui.component.model.ComponentClientImpl.getConfigInfo(ComponentClientImpl.java:352)
at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:214)
at atg.ui.component.ComponentEditor.showComponentEditor(ComponentEditor.java:198)
at atg.ui.component.ComponentBrowser.editSelectedComponent(ComponentBrowser.java:748)
at atg.ui.component.ComponentBrowser$EditAction.actionPerformed(ComponentBrowser.java:735)
at atg.ui.common.DevTree$MousePopupAdapter.applyDefaultAction(DevTree.java:266)
at atg.ui.common.DevTree$MousePopupAdapter.mouseClicked(DevTree.java:289)
at java.awt.AWTEventMulticaster.mouseClicked(AWTEventMulticaster.java:253)
at java.awt.Component.processMouseEvent(Component.java:6266)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
at java.awt.Component.processEvent(Component.java:6028)
at java.awt.Container.processEvent(Container.java:2041)
at java.awt.Component.dispatchEventImpl(Component.java:4630)
at java.awt.Container.dispatchEventImpl(Container.java:2099)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4247)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
at java.awt.Container.dispatchEventImpl(Container.java:2085)
at java.awt.Window.dispatchEventImpl(Window.java:2478)
at java.awt.Component.dispatchEvent(Component.java:4460)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Caused by: java.lang.ClassNotFoundException: com.package.MyComponent
at atg.nucleus.SimpleComponentState.readObject(SimpleComponentState.java:593)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1849)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1947)
at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1871)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at sun.rmi.server.UnicastRef.unmarshalValue(UnicastRef.java:306)
at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:155)
... 33 more
Edited by: Gopinath Ramasamy on Sep 3, 2012 1:32 PM

If you have everything else in place then you may also try to check RMI specific java system property "java.rmi.server.codebase". Try adding the JAR containing your classes into the server's RMI codebase system property as "-Djava.rmi.server.codebase=http://myapp/classes.jar" in the java options of your server startup script. But you should first check what is the existing codebase value and then can specify additional JARs if you feel they should be made available for download to client. Refer http://docs.oracle.com/javase/1.5.0/docs/guide/rmi/codebase.html
You also mentioned about accessing component through REST call. Can you elaborate a little more on the whole environment and scenario that how/where exactly you are using ACC to view that component?

Error while using Image component to display a child flash file

Hi
I'm using Xcelsius version 4.5. I used the "Image Component" to import a child flash file(.swf) into the parent flash file.
I gave the path "D:\246024\Loblaw\Dashboard Docs\New Folder\trend input.swf" in the general tab of the image component.
After exporting the .xlf into a flash file , it works fine in the system in which i created it. If i open the same flash file in any other system the parent file opens but the child flash file imported through the image component is not displayed.
Please help me out in solving this issue
Thanks
Anitha

yes, you will face the same problem as its still looking for the path of the swf.
you need to have the SWF on specific location which is accessable by the Parent SWF
usually web page or something which is accessable for all.
good luck

TSM component

Similar Messages

Maybe you are looking for