TSV_TNEW_PAGE_ALLOC_FAILED - BCS load from data stream task

Hi experts,
We had a short dump when executing BCS Load from Data Stream task. The message is: TSV_TNEW_PAGE_ALLOC_FAILED.
No storage space available for extending an internal table.
What happened? How we can solve this error?
Thanks
Marilia

Hi,
Most likely, the remedy for your problem is the same as in my answer to your another question:
Raise Exception when execute UCMON

Similar Messages

Can we use 0INFOPROV as a selection in Load from Data Stream

Hi,
We have implemented BW-SEM BPS and BCS (SEM-BW - 602 and BI 7 ) in our company.
We have two BPS cubes for Cost Center and Revenue Planning and we have Actuals Data staging cube, we use 0SEM_BCS_10 to load actuals.
We created a MultiProvider on BPS cubes and Staging cube as a Source Data Basis for BCS.
Issue:
When loading plan data or Actuals data into BCS (0BCS_C11) cube using Load from Data Stream method, we have performance issue, We automated load process in a Process Chain. Some times it take about 20 hrs for only Plan data load for 3 group currencies and then elimination tasks.
What I noticed is, (for example/) when loading Plan data, system is also reading Actuals Cube which is not required, there is no selection available in Mapping or selection tab where I can restrict data load from a particular cube.
I tried to add 0INFOPROV into databasis but then it doen't show up as selection option in the data collection tasks.
Is there a way where I can restrict data load into BCS using this load option and able to restrict on cube I will be reading data from ?
I know that there is a filter Badi available, but not sure how it works.
Thanks !!
Naveen Rao Kattela

Thanks Eugene,
We do have other characteristics like Value Type (10 = Actual and 20 = Plan) and Version (100 = USD Actual and 200 = USD Plan), but when I am loading data into BCS using Load from Data Stream method, the request goes to all the underlying cubes, which in my case are Planning cubes and Actual Cube, but I don't want request to goto Actual Cube when I am running only Plan load. I think its causing some performance issue.
For this reason I am thinking if I can use 0INFOPROV as we use in Bex queries to filter the InfoProvider so that the data load performance will improve.
I was able to to bring in 0INFOPROV into DataBasis by adding 0INFOPROV in the characteristics folder used by the Data Basis.
I am able to see this InfoObject Data Stream Fileds tab. I checked marked it to use it in the selection and regenerated the databasis.
I was expecting that now this field would be available for selection in data collection method, but its not.
So If its confirmed that there is no way we can use 0INFOPROV as a selection then I would suggest my client for a redesign of the DataBasis it self.
Thanks,
Naveen Rao Kattela

BAdI UC_DATATRANSFER for BCS Mapping in "Load from Data Stream" method

Hello Everyone,
I need some help on finishing up the code for the UC_DATATRANSFER BAdI.
I have looked up in the SDN and other places, but could not get comprehensive breakdown of documentation except for the "F1" documentation available on the BAdI.
So, any help would be appreciated.
The Steps so far completed,
1. Have activated the BAdI and have created the filter value for the BAdI.
2. After the BAdI has been activated, I was able to go into the MAP method and have written the logic for profit center derivation from consolidation hierarchy.
The issue is there are four components for the Map method,
IT_DATA_SOURCE
IS_DATA_TARGET
ES_DATA_TARGET
ET_DATA_TARGET
The data is available from Source system in the table IT_DATA_SOURCE.
But this is not changeable as it is "Importing" type. Whereas the actual ET_DATA_TARGET which is passed over into FINALIZE method of the BAdI is not filled initially.
When I try to do a MOVE-CORRESPONDING from the IT_DATA_TARGET into ET_DATA_TARGET I continuously am getting the short dumps as both the tables length is not the same.
Did anyone else face the same issue as above when trying to do the BAdI implementation for Mapping.
I will really appreciate if any one can provide me a sample code if possible.
Let me know if you need additional information.
Thanks
Dharma.

Hello,
Thanks for looking into the question.
I already had tried doing that, I get the Short dump stating the object tables are not convertible.
When I looked into the table structures, I found out that the table structures "IS_DATA_TARGET", "ES_DATA_TARGET" & "ET_DATA_TARGET" belong to the same category in terms of these structures being flat structures or tables of length 484 as per the debugger.
Whereas the structure "IT_DATA_SOURCE" has the length 404.
Due to this reason when I say,
ET_DATA_TARGET = IT_DATA_SOURCE, I keep getting the short dumps.
Also, is your consolidation process legal or managerial.
Our Consolidation process is legal and we have the Company and Profit Center fields assigned to the Consolidation Unit role in the Data Basis definition.
Can you please let me know what is the structures length in your system.
Thanks
Dharma.

Error while loading Reported Financial Data from Data Stream

Hi Guys,
I'm facing the following error while loading Reported Financial Data from Data Stream:
Message no. UCD1003: Item "Blank" is not defined in Cons Chart of Accts 01
The message appears in Target Data. Item is not filled in almost 50% of the target data records and the error message appears.
Upon deeper analysis I found that Some Items are defined with Dr./Cr. sign of + and with no breakdown. When these items appear as negative (Cr.) in the Source Data, they are not properly loaded to the target data. Item is not filled up, hence causing the error.
For Example: Item "114190 - Prepayments" is defined with + Debit/Credit Sign. When it is posted as negative / Credit in the source data, it is not properly written to the target.
Should I need to define any breakdown category for these items? I think there's something wrong with the Item definitions OR I'm missing something....
I would highly appreciate your quick assistance in this.
Kind regards,
Amir

Found the answer with OSS Note: 642591.....
Thanks

Problem loading from DATA MART to ODS, SERVICE-API

Hi gurus,
I have a problem loading data from data mart to ODS, full load.
But, if i try extractor itself (test in RSA3) it works fine.
I already replicated, generated,check transfer rules....datamart but when i try to load data, I get this to messages:
Message no. R3005
"The InfoSource 8TEST_MM specified in the data request, is not defined in the
source system."
Message no. RSM340
Errors in source system.
BTW: This test system was copied from production system. And so far I had no problems with system, but i never tried loading from data marts.
Any ideas?
Regards, Uros

Thanks, for your answer.
I already did that and everything is fine, I see the infosource, and if I test the extractor it works fine, but the infopackage gives me above mentioned errors.
I already looked through notes and I couldn't find anything useful.
I forgot to mention that I generated export data source from transacional ODS.
Regards, Uros

Table on delta loads from data mart

Hi,
I am loading data from two DSO's (let's call them A and B) to another DSO (B) in BI 7 with a BW3.5 delta infopackage.
Now I want to know where I can find information on the timestamp or last request from the last delta load from A and B to C.
So in fact I would like to know how the system knows which requests in A en B have not been loaded to C yet at the next delta load.
In which table can I find the information for ODS A and B that is used by the system to define what data in the change log has been loaded or not to ODS C or other targets. (In fact I should have a comparison table in BW as ROOS* in R3)
Thanks in advance!
Kind regards,
Bart

Hi Guys,
Thanks for the answers.
I know how to check everything in the Workbench, but I want to know where the information of the delta is stored technically.
Just for the sake of completeness:
Due to some issues; several successive loads from A and B were correctly loaded into DSO C (the 'new' table), but could not be activated. It is not possible to do a repeat or anything else. I am not going into too much detail, but just take this for granted.
The only way we can 'solve' the problem is to make the system believe that the 3 last loads (activated data) in A and the two last loads in B have not been loaded to C yet. Just deleting the last delta's in C and do a new delta from A and B to C will not work.
Therefore I want to 'manipulate' the table that is being read by a delta load. If I can change the timestamp or request numbers in that table, I can make the system believe that some requests have not been loaded to C yet.
Dirty, but it should work I think. But I am still figuring out what table contains information about the datamart data source (8A and 8B) and the last delta load to the targets.
Hope this is more clear.
Thanks in advance!
Kind regards,
Bart

Automatic loading from data marts

Hi All,
I have a cube which has a data flow wherein I have an ODS1 which gives data to ODS2 and then finally to the cube.
I have put this entire process in a process chain.
But many a times due to an erroneous record,. the ODS1 loading fails and then I have to manually correct the PSA and do a manual activation too in ODS1.
I
I now want to know whether the system will pick up the processes again from the process chain and do further loading automatically OR if there is a possibility of automated loading settings be defined in the infopackage so as to do subsequent data targets once I have done it successfully in ODS1???
Also, if I do such a setting, then the job will be done in my username or BWALEREMOTE??
Thanks,
Sharmishtha Biswas

Thnaks for ur reply,
But it is possible that the data mart does it automatically??
As I have observed that some of the subequent infoproviders get loaded automatically after I manually load and activate one data mart.
I wanted to find an explanation for this..
Thanks,
sharmishtha

Removing zeros from data stream

Hi
I have incoming data (plz see attached diagram which shows the 2 states of the for loop '0' and default) which is a 1-D array of 64 bit real data .....it goes through the loop which removes zeros from the array.
As I have 3 elements in the 1-D array (call them x,y,z ), the loop works very well for all values of 'y' and 'z' .
However when x gets towards 1 and below say 10e-3 (it never is a negative number), the loop is rounding everything to 1 and then when the value gets between 1 and 0 (10e-3 for example) the loop leaves it out altogether and I just get y,z values saved.
Plz help me sort this out .
Cheers
Baz
Attachments:
zeros.PNG ‏25 KB
zeros.PNG ‏25 KB

If you want a tolerance comparison, try the attached VI. I rewrote it from one in vi.lib after an earlier post.
This account is no longer active. Contact ShadesOfGray for current posts and information.
Attachments:
CheckForEquality(DBL).vi ‏23 KB

Oracle BI Publisher no columns loaded from data model

Hello Guys,
I use Oracle BI Publisher 11g. Have created a data model by using
the JDBC thin connection to a 11g database. The creation of the data model
worked fine using a SQL query. Now in the report creation wizard, I select
the "guide me" option to see how nice the wizard is.
The problem comes here, on the second window I should select the columns
but I only read "no columns available". Why is that?

Hi Metalray
For BIP report sample XML data is importent. with sample data you cannot generate the BIP reports.
Follow the below steps, you can achieve your expected BIP output
After crating data set in the data medel save the data model then click on
--get XML output option on right side of the top-corner.
-- then selet no. for the nuber of rows to return dropdown option,
--then click on Run. Then save the sample data by clicking on Save as sample data option.
--then it will take you to the data model page, now again save the data model
--and use it for creating the reports.
Now you were able to see the available columns in the the second window of guide me option
please mark if it helps you..

SEM BCS - Step for Load from Datastream

Hi,
What are steps to configuration "Load from DataStream".
What kind of infocube that i should use?
Thanks in advance.

Hi,
There are rather lot threads reg the issue.
For example:
Re: BCS configuration
Re: How is data loaded into the BCS cubes?
Re: Which info object should be used for Financial statement line (BPS and BCS)
Re: SEM-BCS: Load from data stream
Feel free to ask if something is not clear.

SEM-BCS:Data Stream Upload

Hi! All.
I am facing an issue in Data Stream upload.....The Target field 0Company is 6 char. and the source field 0Company code is 4 char. in length....the system gives an error ...the value Target field exceeds source field..use info object with greater length.....however, upon mapping Company to another infoobject...with 6 char..used instead of 0comp-Code...the system returns yet
another error that its not coming from source system or source system can't be determined i.e. the new info object.......
I was thinking changing target field length to four...any work around this issue...If the target field is changed i.e. 0company what implications will it have or just changing the field in data model do the trick??
Thanks for your input....
Victor

Hello Viktor,
If i understood well your problem i faced the same thing in the past.
When costumizing the load from data stream include the lenght to 4 characters or try to include an offset of 2.
Hope is helps.
If yes award points.
Best regards,
João Arvanas

Data collection task execution in UCMON

Dear Friends
I am using flexible upload method and load from data streams for data upload. Both methods are assigned to my data collection method which in turn is assigned to the task. When i execute the data collection task in consolidation monitor the system executes only the load from data streams and does not give me the option of selecting the method to execute.
To differenciate it i created a new task and assigned only flexible upload method and when i execute this task the system still executes the load from data streams method.
Can anyone guide me as to where i am going wrong?
Cheers
Shivkumar

Hi Mani
I could not follow what you meant to say
"I have done same what u describe, but do not have the issue. Create seperate method for data steam and FU. Then merged both in one method and assigned such method to one task and no issue.. I face that u described,
Can you assign the method to the task, starting from the same starting period and check again."
Do you mean to say that you did whatever i am doing and you too faced the same problem. But the strange behaviour of the system is when i execute it in "Execute with selection screen" mode the system shows all the methods, however if i run it in update mode the system executes only the "Load from data streams" even if the "Flexible upload" method is assigned.
BTW where do you set the validity for a task?
Cheers
Shivkumar

Consolidation Group in Target Cube (Data Collection Task)

Dear Experts,
In consolidation Monitor, While doing Data Collection task via Load from Data Stream, after doing Updation, WHen I see the content of Target InfoCube in RSA1, In GL account Line item I do not get COnsolidation Group Value.
Like
GL account Company CCode Cons Group Currency PV LC PV GC
100000 3000 3000 (Blank) USD 1000 44000
1) Is it necessary to Have Value in Consolidation Group?
2) If Yes, What is the utility and how to get value in this column.?
Regards
Ritesh M.

No, ConsGoups are determined later, during the ConsGroup-dependent tasks.

Unexpected query results during large data loads from BCS into BI Cube

Gurus
We have had an issue occur twice in the last few months but its causing our business partners a hard point. When they send a large load of data from BCS to the real time BI Cube the queries are showing unexpected results. We have the queries enabled to report on yellow requests and that works fine it seems the issue occurs as the system is processing the closing of the request and opening the next request. Has anyone encountered this issue if so how did you fix it?
Alex

Hi Alex,
There is not enough information to judge. BI queries in BCS may use different structure of real-time, basic, virtual cubes and multiproviders:
http://help.sap.com/erp2005_ehp_02/helpdata/en/0d/eac080c1ce4476974c6bb75eddc8d2/frameset.htm
In your case, most likely, you have a bad design of the reporting structures.

Data flow tasks faills while loading from database to excel

Hello,
I am getting error while loading from oledb source to excel and the error as shown below.
Error: 0xC0202009 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
Error: 0xC0209029 at DFT - Company EX, OLE DB Destination [198]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "input "OLE DB Destination Input" (211)" failed because error code 0xC020907B occurred, and the error row
disposition on "input "OLE DB Destination Input" (211)" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the
failure.
Error: 0xC0047022 at DFT - Company EX: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "OLE DB Destination" (198) failed with error code 0xC0209029. The identified component returned an error from the ProcessInput
method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Error: 0xC02020C4 at DFT - Company EX, OLE DB Source 1 [1]: The attempt to add a row to the Data Flow task buffer failed with error code 0xC0047020.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0209029. There may be error messages posted before this with more information on why the thread has exited.
Error: 0xC0047038 at DFT - Company EX: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "OLE DB Source 1" (1) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine
called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Error: 0xC0047021 at DFT - Company EX: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
Any help would be appreciated ASAP.
Thanks,
Vinay s

You can use this code to import from SQL Server to Excel . . .
Sub ADOExcelSQLServer()
' Carl SQL Server Connection
' FOR THIS CODE TO WORK
' In VBE you need to go Tools References and check Microsoft Active X Data Objects 2.x library
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "EXCEL-PC\EXCELDEVELOPER" ' Enter your server name here
Database_Name = "AdventureWorksLT2012" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM [SalesLT].[Customer]" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
' Dump to spreadsheet
With Worksheets("sheet1").Range("a1:z500") ' Enter your sheet name and range here
.ClearContents
.CopyFromRecordset rs
End With
' Tidy up
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Also, check this out . . .
Sub ADOExcelSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim rs As ADODB.Recordset
Set rs = New ADODB.Recordset
Server_Name = "LAPTOP\SQL_EXPRESS" ' Enter your server name here
Database_Name = "Northwind" ' Enter your database name here
User_ID = "" ' enter your user ID here
Password = "" ' Enter your password here
SQLStr = "SELECT * FROM Orders" ' Enter your SQL here
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & _
";Uid=" & User_ID & ";Pwd=" & Password & ";"
rs.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A2:Z500")
.ClearContents
.CopyFromRecordset rs
End With
rs.Close
Set rs = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Finally, if you want to incorporate a Where clause . . .
Sub ImportFromSQLServer()
Dim Cn As ADODB.Connection
Dim Server_Name As String
Dim Database_Name As String
Dim User_ID As String
Dim Password As String
Dim SQLStr As String
Dim RS As ADODB.Recordset
Set RS = New ADODB.Recordset
Server_Name = "Excel-PC\SQLEXPRESS"
Database_Name = "Northwind"
'User_ID = "******"
'Password = "****"
SQLStr = "select * from dbo.TBL where EMPID = '2'" 'and PostingDate = '2006-06-08'"
Set Cn = New ADODB.Connection
Cn.Open "Driver={SQL Server};Server=" & Server_Name & ";Database=" & Database_Name & ";"
'& ";Uid=" & User_ID & ";Pwd=" & Password & ";"
RS.Open SQLStr, Cn, adOpenStatic
With Worksheets("Sheet1").Range("A1")
.ClearContents
.CopyFromRecordset RS
End With
RS.Close
Set RS = Nothing
Cn.Close
Set Cn = Nothing
End Sub
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.

TSV_TNEW_PAGE_ALLOC_FAILED - BCS load from data stream task

Similar Messages

Maybe you are looking for