TSV_TNEW_PAGE_ALLOC_FAILED - error -Short Dump - Storage Problems

Dear Gurus,
I am new at SAP Basis, can you please help with the following;
One of our FI System Analyst is running a FI report that gives the followin error:
ABAP runtime errors    TSV_TNEW_PAGE_ALLOC_FAILED
       Occurred on     30.04.2008 at 11:11:14
>> Short dump has not been completely stored. It is too big.
Please help

Is the report a standart report or a custom one?
If custom, then the report might be using too much memory. You have to look into the report to optmize it.

Similar Messages

Run time error (short dump) executing program SCAN_BW_REFERENCES in SE80

Hi experts,
I am not an ABAPer, or Basis person, rather a hybrid functional/technical Key User for our Business Warehouse system (BW 3.5, Netweaver 2004). We have a user who cannot save BW reports to his favorites and he is getting a number of error messages. OSS note 887002 seems to address this and indicates that I should run program SCAN_BW_REFERENCES from transaction SE80. The program is supposed to perform the checks for BW objects assigned to the Favorites and identify situations causing terminations in BW frontend applications. I have attempted to execute this program on several occassions and always get run-time errors (short dumps). Here is the error:
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time          2008.09.17 19:00:49
ShrtText
     No storage space available for extending an internal table.
What happened?
     You attempted to extend an internal table, but the required space was
     not available.
I have been informed by our Basis group that I have reached a memory limit, but they will not extend the memory paramters. Any ideas on a work-a-round or a way to minimize the number of records this program is pulling in, in an attempt to get it to run?
Thanks,
HC

Hi,
The only response I got from Basis was that they would not extend the memory parameters because they are for all users in the system. Not sure what that means.
The full dump is too large to paste here. I think what I will do is to see if our ABAPers can create a modified version of this program to include selection by user. Typically it is for only one user that I need to run the program, and that surely would fall within the space requirements.
Thanks for your answer.
//HC

Error (Short Dump) while posting any Material document

Hello All Experts,
I am facing an error (short dump) while doing all material document related transactions (for example MIGO,MB1A etc) . I am getting the below message:-
Short text of error message:
Document number 1000 5000000000 2009 was already assigned
Earlier, I had posted some material documents using the same transactions.
Kindly help
Regards,
Atul

Hi Atul,
Please use T-code OMBT to check the number range status of material document. You can click on the 'Intervals' button to check the 'Current number', the last material document number the system was created so far. Try to change the 'Current number' to a number greater than 5000000001, save the change, and post material document again.
Hope it can solve your issue.
Cheers

Report Painter GR214 generation error - Short dump 4.6C

While generating a report with more than twenty sections, the system short dumps with the error message GR214 pointing to "MESSAGE_TYPE_X"
"%_T01JR0 " or "########################################"
"INSERT_ROW_FORMULA_NEW"
Any leads to fix this?
The generation error happens only when I include a last line formula in the last section, Till then it is working fine.

Hi,
The error you are receiving could be caused by a large number of row blocks in your report definition, (you can check the report definition with report RGRRDC00). A report should not contain too many row and column blocks. It is not possible to give an upper bound for the number of row blocks (since the length of the coding depends on other parts of the report as well). However, even a complicated Report Writer or Report Painter report should not contain more than 50 row blocks, and reports with more than 100 row blocks should not be defined.
In this case the report(s) have to be redefined. Please also refer to the note 387916 for further information regarding this issue.
When there are more than 30 variables in a report, please have a look at the note 332091.
Please reduce the number of row blocks in the report by using the function 'Edit' -> 'Rows' -> 'Explode' in the Report Painter
definition. This function enables several rows to be created for one row block (in the Report Painter definition one row block is just one row). Report Painter (and Report Writer) are designed to display hierarchical reports where the rows in the few row blocks are built up using the 'Explode' function.
regards
Waman

Error (short dump) while doing Print review of PO

Freinds,
Business Scenario:We have developed a custom message type for PO output based on standard message type NEU.Also we have created a custom requirement type such taht print as well email output can created by system.
Problem:While doing print preview (via TCode ME23N)of the custom output we manage to see the print preview of PO -->then come back.
But while coming back we get a short dump related to include CL_HANDLE_MANAGER_MM==========CM005.
If any one of you have faced this problem eralier please let us know about the solution.
Regards,
Shailesh Seth

check the OSS note 358293, 548857, 923695

Runtime error-short dump

Hi,
please correct me where i went wrong...
RANGES: r_daterange FOR vbak-audat.
RANGES:GRG_DATERANGE FOR VBAK-AUDAT.
PERFORM CHECK_SELECT_OPTIONS USING DATE_FROM
 DATE_TO
 CHANGING R_DATERANGE[].
if sales order number is the selection criteria
if not salesorder_no is initial.
 clear :wa_vbak, wa_vbfa, wa_costlist_in.
 refresh:t_vbak, costlist_in.
 select avbeln aauart bposnr bnetpr
 into table t_vbak
 from vbak as a
 inner join vbap as b
 on avbeln = bvbeln
 where a~vbeln = salesorder_no
 and a~audat in r_daterange
 and a~kunnr = partner_number
 and b~abgru NE ' ' .
***INCLUDE /VWNA/LINSD_BAPI_INV_GET_INF01 .
*& Form CHECK_SELECT_OPTIONS
 text
 -->P_DATE_FROM text
 -->P_DATE_TO text
 <--P_R_DATERANGE[] text
FORM CHECK_SELECT_OPTIONS USING P_DATE_FROM LIKE VBAK-AUDAT
 P_DATE_TO LIKE VBAK-AUDAT
 CHANGING PRG_DATERANGE LIKE GRG_DATERANGE[].
DATA: WA_DATERANGE LIKE GRG_DATERANGE.
CLEAR WA_DATERANGE.
REFRESH PRG_DATERANGE.
WA_DATERANGE-SIGN = 'I'.
iF ( P_DATE_FROM IS INITIAL ) AND ( P_DATE_TO IS INITIAL ).
ELSEIF P_DATE_FROM IS INITIAL.
 WA_DATERANGE-OPTION = 'LE'.
 MOVE P_DATE_TO TO WA_DATERANGE-LOW.
ELSEIF P_DATE_TO IS INITIAL.
 WA_DATERANGE-OPTION = 'GE'.
 MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
ELSE.
 WA_DATERANGE-OPTION = 'BT'.
 MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
 MOVE P_DATE_TO TO WA_DATERANGE-HIGH.
ENDIF.
APPEND WA_DATERANGE TO PRG_DATERANGE.
clear wa_daterange.
When i execute the code its creating a short dump and the message is :
The current ABAP/4 program attempted to execute an ABAP/4 Open SQL
statement in which the WHERE condition contains an IN itab operator.
The IN itab operator is used with internal tables which
have the following structure:
SIGN(1) OPTION(2) LOW LIKE db_field HIGH LIKE db_field
The OPTION column should contain only one of the following values:
"EQ LE GE CP BT NE LT GT NP NB"
The value " " is not allowed here. Please help me in resolving the error..
Thanks,
Challa

Hi
This will happen when P_DATE_FROM IS INITIAL AND P_DATE_TO IS INITIAL.
You are populating the range table with just sign as 'I' and option is not populated.
change your code to:
WA_DATERANGE-SIGN = 'I'.
iF ( P_DATE_FROM IS INITIAL ) AND ( P_DATE_TO IS INITIAL ).
ELSEIF P_DATE_FROM IS INITIAL.
WA_DATERANGE-OPTION = 'LE'.
MOVE P_DATE_TO TO WA_DATERANGE-LOW.
APPEND WA_DATERANGE TO PRG_DATERANGE.
ELSEIF P_DATE_TO IS INITIAL.
WA_DATERANGE-OPTION = 'GE'.
MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
APPEND WA_DATERANGE TO PRG_DATERANGE.
ELSE.
WA_DATERANGE-OPTION = 'BT'.
MOVE P_DATE_FROM TO WA_DATERANGE-LOW.
MOVE P_DATE_TO TO WA_DATERANGE-HIGH.
APPEND WA_DATERANGE TO PRG_DATERANGE.
ENDIF.
*APPEND WA_DATERANGE TO PRG_DATERANGE.
clear wa_daterange.
Regards
Navneet

Short dump during ME23N transaction due to missing field in KOMP table

Hi All,
We have just upgraded to Business Suite 7.0 and are experiencing the following error:
Short dump during processing of transaction ME23N - error is in program SAPLV61A when the system calls the following field: KOMP_SERVICE_PARAM2 (this does not exist in KOMP). We need to get this resolved as soon as possible, It appears that SAP have removed this field from the table KOMP but the standard programme is still looking for this field. Can anyone provide an oss note number or insight into how to resolve this issue please.
Many Thanks
Amanda

Dear,
This problem is caused by a missing initialization of the structure KOMP in the program SAPLV61A.
The problem may also occur during , when the "Create PO automatically" indicator (TVAP-ALEKZ) is set for the relevant item category in the item category Customizing (transaction VOV7). In this case, the data of the purchase order item that was previously processed is used for the back update of the sales order from the purchase order in KOMP.
Add the following import parameter to the function module RV_KONV_SELECT:
    Parameter name        COMM_ITEM_I
    Typing          LIKE
    Associated type            KOMP
    Optional        X
    Pass Value       X
Please refer the OSS note 1261566.
Regards,
R.Brahmankar

Short Dump when deleting CMR/DMR

Hi,
When I delete a CMR or DMR the system hangs and I get a Short Dump. I have traced the line where the dump is occuring, but cannot figure why the error/short dump occurs.
INCLUDE FV45KFKD_VBKD_FUELLEN_TEIL_2
FORM VBKD_FUELLEN_TEIL_2 USING VALUE(US_POSNR)
IF NOT DA_WARNUNG IS INITIAL AND
 SVBKD-TABIX > 0.
 CLEAR DA_WARNUNG.
 IF VBKD-FKDAT EQ DA_FKDAT.
 SET CURSOR FIELD 'VBKD-FKDAT'.
 WRITE VBKD-FKDAT TO DA_DATUMC DD/MM/YYYY.
 MESSAGE W221 WITH DA_DATUMC. <== The error is occuring when this statement is exceuted.
 ENDIF.
ENDIF.
Although the short dump thing the error occurs when trying do the next ste PERFORM VBKD_FUELLEN_IAOM USING US_POSNR.
Thanks in advance
Naing

I would check if you have any code in userexit_check_vbkd for example.
NOTE: sapmv45a processes not only sales orders but contracts, CMR/DMR,... so please be careful with your code in userexits and make sure you restrict it to proper document types/transactions.
Ideally you need to write your userexits in such a way that they all can be switched-off easily (like put all code in each userexit between if sy-uname = 'SAPLOOK' ... endif. for example) in this case when you are logged on with SAPLOOK ID - userexits are off.
The bottom line is - if you are able to perform any action (delete DMR/CMR) when your exits are OFF -> the problem is somewhere in your exits.
The problem may NOT be in the code where dump occurs, it can be well in advance
One small flag or incorrect read statement which re-sets workarea of internal table in one of your userexits may cause problems down the line.

Short dump while executing Ztransaction

Hi,
I am doing module pool programming by desinging the screens, handling events and running it thru a Z-trnasaction.
My first query is how do I debug a module pool prg.. so as to understand that the error/short dump is because of my code or due to some other reason ...
My second query is that I am getting a short dump with "DIAG_RFC_EXCEPTION" ... I do have access to SM59 ... do I need to check for some other RFC propeties ??... Is this error related to Basis guys??? & the line where it is dumping is as follows :-
Einzelbildverarbeitung Transaktionsvarianten/Batch-Input/CATT
 call function 'SYSTEM_SCREEN_INPUT'
 exporting
 modul = p_repid.
endform. " %_CTL_INPUT
Thank You,
SB

Hi SB,
One way to debug module pool(Pop-up) is like this :
 Many times we would like to start debugging from a Pop-up screen, but the editor doesn't allow us to do that.
*Instead, we have to start debugging all the way from main screen.
*Enclosed is a 3 line script would allow us to make our edits in a Pop-up.
*Create a file with following code and save it as 'debugger.txt' in your local drive and drag and drop it (from Windows explorer) on to the Pop-up box and the debug mode will be on.
FILE CONTENTSMany times we would like to start debugging from a Pop-up screen, but the editor doesn't allow us to do that. Instead, we have to start debugging all the way from main screen. Enclosed is a 3 line script would allow us to make our edits in a Pop-up. Create a file with following code and save it as 'debugger.txt' in your local drive and drag and drop it (from Windows explorer) on to the Pop-up box and the debug mode will be on!
Code: (File Contents)
[FUNCTION]
Command=/H
Title=Debugger
Type=SystemCommand
Hope this will help you to find out the error while debugging the pop up .
Cheers
Sunny

Short Dump in rfc call in background

Hi All,
I am getting an RFC error short dump in a background program the short dump message says "RFC_ERROR_SYSTEM_FAILURE: no system found in another group for import queue", the same RFC works fine in foreground and in another background program. I looked into the target system, there is no dump generated.
I tested it in one system it works fine but in another it generates a short dump. I am trying to understand why this is happening any inputs are welcome.
Thanks in advance,
Barjinder

It has been resolved the called FM was raising an exception and it was not captured in the calling FM.
Thanks to all.

Short dump for rsa3

Hi sapxperts,
I am getting error ,short dump when i execute the RSA3 for inventory management data Source 2LIS_03_BX.
Please somebody help with regards to Inventory management stuff .
thank you.

hi stalin,
Heres how to proceed.
execute tcode RSA3.Give your datasource name.In the below screen there is a Grid.
There you can see a list of characteristics available.You can put some values there for a characteristics.
For ex- If you see company code there. Try putting some values there.
This will filter out the selection and lesser values will be extracted.
hope it helps,
regards,
Parth.

Short Dump       TSV_TNEW_PAGE_ALLOC_FAILED

Hi All,
I am facing the short dump "TSV_TNEW_PAGE_ALLOC_FAILED" problem in my PRD system.
Please find ST22 log and suggest the solution:
Runtime Errors         TSV_TNEW_PAGE_ALLOC_FAILED
Date and Time          18.11.2009 12:12:09
Short text
     No more storage space available for extending an internal table.
What happened?
     You attempted to extend an internal table, but the required space was
     not available.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
     Try to find out (e.g. by targetted data selection) whether the
     transaction will run with less main memory.
     If there is a temporary bottleneck, execute the transaction again.
     If the error persists, ask your system administrator to check the
     following profile parameters:
     o ztta/roll_area            (1.000.000 - 15.000.000)
            Classic roll area per user and internal mode
            usual amount of roll area per user and internal mode
o ztta/roll_extension       (10.000.000 - 500.000.000)
        Amount of memory per user in extended memory (EM)
o abap/heap_area_total      (100.000.000 - 1.500.000.000)
        Amount of memory (malloc) for all users of an application
        server. If several background processes are running on
        one server, temporary bottlenecks may occur.
        Of course, the amount of memory (in bytes) must also be
        available on the machine (main memory or file system swap).
        Caution:
        The operating system must be set up so that there is also
        enough memory for each process. Usually, the maximum address
        space is too small.
        Ask your hardware manufacturer or your competence center
        about this.
        In this case, consult your hardware vendor
abap/heap_area_dia:        (10.000.000 - 1.000.000.000)
        Restriction of memory allocated to the heap with malloc
        for each dialog process.
Parameters for background processes:
abap/heap_area_nondia:        (10.000.000 - 1.000.000.000)
        Restriction of memory allocated to the heap with malloc
        for each background process.
Other memory-relevant parameters are:
em/initial_size_MB:         (35-1200)
        Extended memory area from which all users of an
        application server can satisfy their memory requirement.
or analysis
The internal table "\FUNCTION-POOL=EL40\DATA=GL_NODETAB[]" could not be further
extended. To enable
Error handling, the table had to be delete before this log was written.
As a result, the table is displayed further down or, if you branch to
the ABAP Debugger, with 0 rows.
At the time of the termination, the following data was determined for
the relevant internal table:
Memory location: "Session memory"
Row width: 2160
Number of rows: 1782088
Allocated rows: 1782088
Newly requested rows: 4 (in 1 blocks)
to correct the error
The amount of storage space (in bytes) filled at termination time was:
Roll area...................... 4419712
Extended memory (EM)........... 2002743520
Assigned memory (HEAP)......... 2000049152
Short area..................... " "
Paging area.................... 32768
Maximum address space.......... " "
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"TSV_TNEW_PAGE_ALLOC_FAILED" " "
"SAPLEL40" or "LEL40U11"
"ISU_ELWEG_HIERARCHY_BUILD"
Please help me out to resolve the issue.
Regards,
Nitin Sharma

hI cHANDRU,
tHANKS FOR YOUR RESPONSE:
pLEASE FIND BELOW MENTIONED DETALS:
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SVPSAPECP01"
Database type..... "MSSQL"
Database name..... "ECP"
Database user ID.. "ecp"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Nov 18 2008 22:53:36"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQL_Server_8.00 "
Patch level. 185
Patch text.. " "

Short dump errors desc--how to resolve

I would like to know the short dump errors meaning and how to resolve it. i have the following errors
1. TSV_TNEW_PAGE_ALLOC_FAILE----
for this the description for ERROR ANALYSIS is : The internal table "IT_24" could not be enlarged further. To allow error handling, the table has to be deleted before this log was created.HOW TO CORRECT THE ERROR is : the amount of storage space was (in bytes) filled at termination time was:
Roll area..........1708928
Extended memory (EM).........440057520
Assigned memory (HEAP).......465813648
short area.........." "
Paging area.....33857536
Maximum address space....." "
2. DBIF_DSQL2_SQL_ERROR----
HOW TO CORRECT THE ERROR is:
Database error text......."ORA-01555: snapshot too old: rollback segment number 2 with name "PRS_0" too small"
Database error code - 1555
Triggering SQL statement......."FETCH NEXT"
Internal call code................"[DBDS / NEW DSQL]"
Please check the entries in the system log (Trasaction SM21)
3. TSV_LIN_ALLOC_FAILED----
this error analysis which also gives HOW TO CORRECT THE ERROR is almost the same like the first error description which i have written like memory space and so on
i would appreciate if u could clarify these errors and how to resolve it. Thanks in advance.

Hi,
TSV_TNEW_* error are the memory problems in BI, you need to wait untill the system load is reduced...check the TA: SM37 and then repeat the failed steps, it will be successful.
DBIF_* are database releated errors....oracle backend error, u need to find out where the error has occured in the SQL statement and fix the error.
Usually these errors will the locks.
Oracle 8i error message says:
ORA-01555
snapshot too old: rollback segment number string with name "string"
too small
Cause: Rollback records needed by a reader for consistent read are overwritten
by other writers.
Action: Use larger rollback segments.
Regards,
Vijay
Message was edited by:
Vijaya Kumar Malyavantham

Short dump with error :TSV_TNEW_INDEX_NO_ROLL_MEMORY

This is the error that i'm getting
ABAP runtime errors TSV_TNEW_INDEX_NO_ROLL_MEMORY
Occurred on 29.01.2007 at 20:27:13
>> Short dump has not been completely stored. It is too big.
No roll storage of length 64094208 available for internal table index.
What happened?
Each transaction requires some main memory space to process
application data. If the operating system cannot provide any more
space, the transaction is terminated.
Please advice.
Points Assured
Regards,
Ravikanth.

It is as it says - a problem of not enough (ROLL) memory.
- You can ask basis to look into it - whether ROLL memory on app server can be increased.
- You can run whatever you are running at a time when the load on the system is less.
- You can check the code that runs to see why it should look for so much memory - maybe you can change the code so it uses less memory.

Custom error message in user exit is giving Short dump

Hi All,
We have a scenario where in if any user try to create/Change/Delete particular types of contract in SAP system we have to issue error message
saying ZIN/ZIR contract creation/Change/Deletion is blocked in SAP. This has to be done from the web application. So we are putting below code
in user exit MV45AFZZ in the form USEREXIT_SAVE_DOCUMENT_PREPARE.
CONSTANTS: lc_vbcpic01 TYPE sy-uname VALUE u2018VBCPIC01u2019, u201CWeb application user ID
         lc_zin           TYPE vbak-auart VALUE u2018ZINu2019,
                     lc_zir            TYPE vbak-auart VALUE u2018ZIRu2019,
                     lc_text(32)    TYPE c VALUE u2018Check long text for more detailsu2019.
DATA: l_uname TYPE sy-uname.
CLEAR: l_uname.
MOVE sy-uname TO l_uname.
*If user ID is not the Web application ID then block the creation/Change/Deletion
IF   l_uname NE lc_vbcpic01
AND ( vbak-auart EQ lc_zin
OR    vbak-auart EQ lc_zir ).
MESSAGE e830(zv) WITH lc_text.
ENDIF.
This code is working fine while creating/Changing the contract i.e. Giving us error message so that user wonu2019t be able to create/change the contract.
But when we delete the contract from VA42, Control is coming to this message statement and is giving Short dump. Below is the error analysis of the dump.
Error Analysis:
During "Exit Command" processing, the program tried to send a " " message.
This is not allowed at this point in processing.
The program had to be terminated.
Screen name.............. "SAPMV45A"
Screen number............ 4001
If any one has come across such scenario/any work around for this problem please let me know your inputs. Your inputs are highly appreciated.
I am working on 4.6C version of SAP.
Note: When i issue information/Warning message contract is getting deleted after displaying the message.
Thanks,
Vinod.

I exactly replicated the same in DELETE_DOCUMENT also
I am getting the Dump. I tried with exit also , but it continued and deleted. To avoid deletion we have to use Leave program or LEAVE TO CURRENT TRANSACTION.
Delete Function is Defined as EXIT command. so it is not possible to give error message. To convice you i just copied demo program and raised the error message.
it is also giving the dump.
copy the demo program DEMO_DYNPRO_AT_EXIT_COMMAND and make this change , information to error .
MODULE cancel INPUT.
MESSAGE e888(sabapdocu) WITH text-001 ok_code input1 input2.
IF ok_code = 'CANCEL'.
    CLEAR ok_code.
    LEAVE PROGRAM.
ENDIF.
ENDMODULE.
and see...

TSV_TNEW_PAGE_ALLOC_FAILED - error -Short Dump - Storage Problems

Similar Messages

Maybe you are looking for