TSV_TNEW_PAGE_ALLOC_FAILED when start export BSEG data

Dear all,
We need to download contents of database table BSEG into a local file via SAP GUI.
When we start we get TSV_TNEW_PAGE_ALLOC_FAILED.
SAP ECC 6.0 Oracle 10.2.0.2 and HP-UX 11.23
There is physical memory in the system of 50 GB.
SAP Memory      Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio %
                                                                                Roll area            2,50      6.551      6.664     131.072    131.072   IDs           97,06
Page area            0,12        315      1.136      65.536    196.608   Statement     76,00
Extended memory     12,43 2.084.864 2.101.248 16.773.120          0                  0,00
Heap memory                  500.446          0     501.962          0                  0,00
The MaxUse of Extended Memory does not exceed 2.101.248 and we still get
"Memory low. leave the transaction before taking a break!""
Can you please advice what should I tune to prepare the system to get all exports from BSEG for all fiscal years?
there are 10 000 000 in BSEG totaly
Thank you in advance.
Ruzica

This is basically SE16.
That is not the recommended way of doing that - it will
- allocate a LOT of memory on the source system - and that twice: once for reading the data and another time the same amount to fill the export table - and eventually dump (as you see it).
- create lots of traffic on your network
- will consume a lot of memory on the PC you download the data to. The grid is to be built on the client, if you're unlucky, your PC may run out of memory too
SE16 was not designed to "download" huge amounts of data, it's used to display table entries.
I suggest you create a small ABAP doing that, writing the output on the server and then either enable to user to access that file (using e. g. SAMBA) or send it via email.
Markus

Similar Messages

Http: 404 when starting 'manage user data' in EBP/SRM for the firs time.

We are customizing SRM 3.0 EBP 4.0 with SAPKU40005.
When we tried to create the first users we started to receive the following error 'http: 404 Page not Found' when starting 'manage user data'. (URL: http://[server]/sap/bc/bsp/bbpusermaint/!?client=400&language=EN&~logingroup=SPACE&addSession=1&parentBbpSession=SRP:[server]:0000.0005.d5ffd7b2.d87e
I've created the ADMIN user in the SU01 transaction. When logon in mySRM browser with this or any administrator user and try to 'manage user data' i get this error.
I've looked in the '(...)inetpub\wwwroot\sap' directory and didn't found any 'bc/bsp/...' directory.
Can someone please give me an hint ....
Tanks

Hello Carlos,
the BSP Framework you are now in has nothing to do with the ITS stuff like inetpub or wwwroot.
Get the docu for Web AS 6.20 and have a look into transaction SICF. There you can activate your application: follow the path sap/bc/bsp/bbpusermaint, right mouse click on the "node" and say activate.
This maybe solves your problem. But read a little bit of the doco on Internet Communication Framework (TX SICF) first.
Regards, Bernd

The developer 3 crashed,when i exported the data out xls ,why?

i have been reinstall office and developer 3,but it still no echo.
why?
thanks.

Try to be more definitive when posting. For instance, give the amount of records to be exported.
There are several reason SQL Dev got crashed when exporting into XLS file.
Usually this happened because the number of rows to be exported from the database is so big and therefore caused Java out of memory problem.
Eventhough, you are using the latest version of Office 2010, with its Excel (xlsx) could hold up to 1 million records, SQL Dev 3 currently does not able to export it into xlsx format.
There is solution for this by increasing Java heap memory.
Well, for me, the easier solution for exporting massive data (more than 65K records) is to export them using csv format. Then, you can proceed opening the csv on Excel.
Regards,
Buntoro

Installed itunes on xp but when started I get 'Data Execution Prevention' message

Have downloaded iTunes to XP but when i start the program all I get is an error text box with Data Execution Prevention message. We are running Firefox with AVG Anti Virus if this helps?
Thanks
SD

Try updating your QuickTime Player to the latest version. Does that clear up the DEP errors in iTunes?

System Copy:Failure when starting export with SAPINST

We are busy with a Unicode conversion and needs to start the export with sapinst. All pre unicode conversion steps are done, we upgraded from 4.6C to ECC6.0. It is a distrubuted system running on MSSQL. Started the export on the DB server and got the follwing error below.
Regards
Roger
INFO 2007-02-08 20:09:27
Execute step stepPreconditions of component |NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0.
INFO[E] 2007-02-08 20:09:27
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2007-02-08 20:09:27
FSL-02077 File system export (share) sapmnt does not exist.
ERROR 2007-02-08 20:09:27
CJS-00030 Assertion failed: in NW_ABAP_Export.stepPreconditions: Executable directory 'G:\usr\sap\HD3\SYS\exe\nuc\NTI386' must exist
ERROR 2007-02-08 20:09:27
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-02-08 20:09:27
FCO-00011 The step stepPreconditions with step key |NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0|stepPreconditions was executed with status ERROR .
INFO 2007-02-08 20:09:36
An error occured and the user decide to stop.\n Current step "|NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0|stepPreconditions".

Hi All
These are the steps I had to perform when I faced the issue -
Background:
Faced the issue when I was exporting the DB instance (SQL 2000) using SAPINST.
Steps:
1. We are running NW04S Portal System.Copied the E:\usr\sap\DEV.... files from CI to DB server.
2. Defined sapmnt/saploc shares for E:\usr\sap folder on DB server.
3. Created the folder E:\usr\sap\DEV\SYS\exe\uc\NTI386\mssjdbc and copied the files base.jar,util.jar,sqlserver.jar,spy.jar files from E:\usr\sap\DEV\JC00\j2ee\jdbc folder.
4. Retry the SAPINST. Final confirmation screen appeared.
5. Checked all the parameters for correctness and clicked on start...export started and finished completely.
All these steps I have done just looking at the log file.One thing I am not still clear is why SAPINST is looking for \usr\sap/...files/folder in DB instance instead of App server.
Would appriciate if any one can clarify this.
Thanks
Naresh P.

Why does biobench freeze sometimes when starting to accuire data?

Sometimes when I try to start logging data it will not display any data and the time axis will not advance. If I hit the "Stop" button, it will stop after a short delay. The only way to get it to work again is to reboot the computer. Any suggestions?

Sometimes when I try to start logging data it will not display any data and the time axis will not advance. If I hit the "Stop" button, it will stop after a short delay. The only way to get it to work again is to reboot the computer. Any suggestions?

How to export the data as integer into excel sheet?

Hi All,
I am working on export to excel functionality and using JEXCEL API to create it. When I export the data to excel sheet, the data are stored in text format in the excel sheet. If I click on summation button on excel sheet, it is not summing up the column values since it is stored as the text format.
I am writing the following code:
for(Iterator iter = columnInfos.keySet().iterator(); iter.hasNext();){
String attributeName = (String)iter.next();
for(int index = 0; index < dataNode.size(); index++){
try{
IWDNodeElement nodeElement = dataNode.getElementAt(index);
String colVal = nodeElement.getAttributeAsTex(attributeName);
Label value = new Label(j, index + 1, colVal);
sheet.addCell(value);
j++;
Here colVal is the variable which holds the data in string format. So I was just trying to convert it into integer format and used Integer.parseInt(colVal).
But Label keyword accepts only the int,int,string arguments.
Is there any other option to change it as integer value while exporting to excel sheet.
Pls suggest.
This is very urgent.
Regards,
Subashini.

Hi Gopal,
Pls refer the following link.
/people/subramanian.venkateswaran2/blog/2006/08/16/exporting-table-data-to-ms-excel-sheetenhanced-web-dynpro-binary-cache
I have used the same coding which is mentioned in this link.
And also I cannot use integer.parseInt(colval) because new Label() will accept only the int,int,string as parameters.
Here goes my to excel method code which exports the data to excel sheet .
private FileInputStream toExcel(IWDNode dataNode, Map columnInfos) {
String fileName = "output.xls";
IWDCachedWebResource cachedExcelResource = null;
int i = 0;
try{
File f = new File("output.xls");
WritableWorkbook workbook = Workbook.createWorkbook(f);
WritableSheet sheet = workbook.createSheet("First Sheet", 0);
for(Iterator coluinfoitr = columnInfos.keySet().iterator(); coluinfoitr.hasNext();){
Label label = new Label(i, 0, (String)columnInfos.get(coluinfoitr.next()));
sheet.addCell(label);
i++;
int j = 0;
for(Iterator iter = columnInfos.keySet().iterator(); iter.hasNext();){
String attributeName = (String)iter.next();
for(int index = 0; index < dataNode.size(); index++){
try{
IWDNodeElement nodeElement = dataNode.getElementAt(index);
String colVal = nodeElement.getAttributeAsText(attributeName);
Label value = new Label(j, index + 1, colVal);
sheet.addCell(value);
catch (Exception e){
wdComponentAPI.getMessageManager().reportException(" Data Retrive Err :" + e.getLocalizedMessage(),false);
j++;
workbook.write();
FileInputStream excelCSVFile = new FileInputStream(f);
cachedExcelResource = getCachedWebResource(excelCSVFile, fileName, WDWebResourceType.getWebResourceType("xls", "application/ms-excel"));
wdContext.currentContextElement().setExcelDownload(cachedExcelResource.getURL());
workbook.close();
It is exporting the data in text format. So I am unable to sum up the column values in the excel sheet.
I need an alternate solution wherein I can export the data in integer format to excel sheet and then sum up the column values by clicking on summation button.
Hope I am clear now.
Pls suggest.
Regards,
Subashini.

EXPORT to MEMORY ID Vs. EXPORT to DATA BASE IDX table??

Hi,
Some times we use EXPORT to MEMORY ID and some times we EXPORT to DATABASE IDX table, pls. let me know,
1) When we use EXPORT to MEMORY ID?
2) When we use EXPORT to DATA BASE IDX table?
3) I knew that in the (1) case, data wuld be stored in shared memory for session live.......but, what about (2) case,Where its stored, is it storeas really in data base? like other data (say, sales order data) this exported data also persists for ever in the Oracle data bse? or this table (idx) is a logical data base?
Thank you

First of make it a point to read the SAP documentation if you have any doubts: [http://help.sap.com/abapdocu_70/en/ABAPEXPORT_DATA_CLUSTER_MEDIUM.htm#!ABAP_ALTERNATIVE_4@4@|http://help.sap.com/abapdocu_70/en/ABAPEXPORT_DATA_CLUSTER_MEDIUM.htm#!ABAP_ALTERNATIVE_4@4@]
SAP has defined a predefined DB table INDX as a reference (you can create your custom table similar to INDX if you want). When you EXPORT the data to this table, a new record is created in the table & the data exported will be stored in RAW format.
This data remains in the INDX table even after the session is terminated.
BR,
Suhas

Export Of Data In The .CSV Format With Column Headings On Top

I'm trying to export data in the .csv format from a report (Crystal Reports XI Release 2). When I export the data, the heading appears in the first few columns on the left hand side (i.e. columns "A" thru "G") for every row, rather as a column heading on top. These header describe the data beneath it. I tried various combinations of export options. The file needs an extension .csv (or .xls) for the tool that uses the data. Any suggestions how I can accomplish this ?

Abhishek,
I tried to apply your solution, but forgot that the Crystal Reports support desk updated my version of Crystal Reports XI to Release 2 for a previous problem. My CDs are Crystal Reports XI Release 1. Now I can't export at all until I figure out how to turn on the export option. I do have access to older version (version unknown) that came with one of business system. The options it has are "Character", "Tab", and "Delimeter" for "Separated Values (CSV)". It does not have the option that you mentioned. Is there a similar option with this older version ? Lastly, How can I turn on the "Export" for "Crystal Reports XI Release 2" ? Thanks ! ! !

Exporting LDIF Data in gunzip format

Hi All,
When you export suffix data, if the filename of the export file ends with .gz, ODSEE automatically compresses the file.
[http://docs.oracle.com/cd/E35622_01/html/821-1216/whatsnew7.html#scrolltoc].
I tried exporting the suffix data in .gz format using below command:
./dsconf export -h host -p port "dc=test,dc=com" /home/oracle/test.gz
Although it created the file but I was not able to see the contents and gunzip command throwed me the error "not in gzip format".
So, does this command work, I mean export the data in .gz format or I am missing something here?
I was able to export the data in ldif using the same command.
Regards,
Sunny

My bad, the file name has to be test.ldif.gz.

Why does Logic Pro 9 add 0.3s silence at start of all my tracks when I "export all tracks as audio files"?

OK - when I "export all tracks as audio files" it works fine - I get a load of exported tracks (annoyingly with the stupid "_bip" prefix at the end).
But I find that they all have about 0.3s silence inserted at the start. WHY??!!!
I checked, and on the timeline all the tracks start with their first note at the beginning of the track so there is no silence in the arrangement. But still this silence on export.
This Logic feature is so badly designed - why can't it do the simplest things as expected.

rbdavis wrote:
Thank you I will look into plug-in latency compensation. However, there is no latency or need for latency compensation when outputting offline files in this way. Latency compensation is for live playback where real-time processing matters. So this is flawed software design, hence my comments about it being illogical.
"there is no latency or need for latency compensation when outputting offline files.....etc"
You don't fully understand how Logic's audio engine and buffering scheme works... not that anyone fully does except the programmers. Basically your above statement is incorrect, as some plugins have built-in-latency and others don't, but that's not the complete picture. The problem is a combination of a plugin's built-in-latency and how Logic buffers data. Logic deactivates the audio engine when stopped, all plugins and software instruments become deactivated including the ability to load or purge data buffers with the exception of a software instrument or audio track that is selected for "live" input.
(Look up Plug-in-Latency Compensation in the manual for a full explation of the choices available)
I won't disagree with you about the software design, however, rather than flawed I tend to think of it as antiquated. The positive side of this is extremely low processor use and the ability to design templates with all plugins and software instruments loaded and ready to start a new project. The downside most Logic users are familiar with... unexpected overloads in the middle of a project when a approaching a region that makes use of processor intensive plugins, Loops that don't match up perfectly when starting a project from bar 1 and/or missing notes at the beginning of MIDI loop if starting at bar 1.... plus a half dozen other anomalies related to Logic's "efficient" audio engine. The efficiency concept made sense back when computers didn't have enough power to handle active or semi-active plugins, seems it causes more problems than not these days.

When I tried to Mail Merge for Data is is not exporting any data.

HI,
EBS-12.1.3
DB-11gR1
OS - RHEL 5.6
[With my Login User and SysAdmin Login User] When I enter into to the "People -> Enter and Maintain" Form and then I press the "Export Button", there is error Alert
Function is not available to this responsibility. Change Responsibilities or Connect to the System Administrator
I Added the Function "HR ADI Seeded Integrator Form Functions" into the "AE HRMS Manager" Responsiblity. It is also working and Export Data icon is enable.
Problem:
But Problem is when I tried to Mail Merge for Data is is not exporting any data.
====================================================================
Steps
1.Move to the "People -> Recruirment" and then "Request Recruitment Letter" .
2. Enter the New Request. as
Letter Name "App. Letter Contract Site",
Automatic or Manual = Manual.
Select the Name from the LOVs for the Request for Detail Block.
3. Press the "Export Data" icon.
4. Integrator Page Appear with my Custom Integrator Name as "Appointment Letter - Contact Site".
5. Select the "Word 2003" from the View List. and Reporting is Checked.
6. Review the Folowing Enteries as:
Integrator Appointment Letter - Contact Site
Viewer Word 2003
Reporting Yes
Layout App. Letter Contract Site
Content XXHR_MBE_APP_LET_CONT_SITE_V
Session Date 2011/08/02
Mapping XXHR_MBE_APP_LET_CONT_SITE_V Mapping
7. Press "Create Document" Button.
8. It will open the Excel 2003 and then Word 2003. But no data down download from the Form.
9. It open the Mail Merge Letter but no Data is Display.
===========================================================
Note:
a. I am following the Steps from the Link:"http://apps2fusion.com/at/38-ss/351-generate-recruitment-letters-web-adi".
b. From the "Desktop Integrator Manager", "Oracle Web ADI", "HRMS Web ADI", it is working fine and Dowload the Data.
===========================================================
Thanks
Vishwa

Please try the solution in ("Function not available to this responsibility" Error While Cliclking On Forms Personalisation [ID 1263970.1]) and see if it helps.
Thanks,
Hussein

I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (what does this mean?)

I recently updated my iTunes to the most recent version and I am receiving an error message when starting up iTunes: iTunes was unable to load data class information from sync services. Reconnect or try again later. (Does anyone know what this means and if it is going to cause me issues?)

http://support.apple.com/kb/TS2690?viewlocale=en_US&locale=en_US

Error 8 when starting the extracting the program-data load error:status 51

Dear all,
I am facing a data exracton problem while extracting data from SAP source system (Development Client 220). The scenario and related setting are as the flowings:
A. Setting:
We have created 2 source system one for the development and another for the quality in BW development client
1. BW server: SAP NetWeaver 2004s BI 7
PI_BASIS: 2005_1_700 Level: 12
SAP_BW: 700 Level:13
Source system (Development Client 220)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: SunOS
Source system (Quality Client 300)
2. SAP ERP: SAP ERP Central Component 6.0
PI_BASIS: 2005_1_700 Level: 12
OS: HP-UX
B. The scenario:
I was abele to load the Info provider from the Source system (Development Client 220), late we create another Source system (Quality Client 300) and abele to load the Info provider from that,
After creating the another Source system (Quality Client 300), initially I abele to load the info provider from both the Source system , but now I am unable to load the Info provider from the (Development Client 220),
Source system Creation:
For both 220 and 300, back ground user in source system is same with system type with same authorization (sap_all, sap_new, S_BI-WX_RFC) And user for source system to bw connection is dialog type (S_BI-WX_RFC, S_BI-WHM_RFC, SAP_ALL, SAP_NEW)
1: Now while at the Info Package : Start data load immediately and then get the
e-mail sent by user RFCUSER, and the content:
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Service API .
2:Error in the detail tab of the call monitor as under,
bi data upload error:status 51 - error: Error 8 when starting the extracting the program 
Extraction (messages): Errors occurred
Error occurred in the data selection
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted (red)
bw side: status 03: "IDoc: 0000000000007088 Status: Data passed to port OK,
 IDoc sent to SAP system or external program"
r/3 side: status 51: IDoc: 0000000000012140 Status: Application document not posted
 Error 8 when starting the extraction program
Info IDoc 1 : Application document posted (green)
 r/3 side: "IDoc: 0000000000012141 Status: Data passed to port OK
 IDoc sent to SAP system or external program"
 bw side: "IDoc: 0000000000007089 Status: Application document posted,
 IDoc was successfully transferred to the monitor updating"
Have attached screen shots showing error at BW side.
 check connection is ok, tried to restore the setting for bw-r3 connection though same problem
 Have checked partner profile.
what's wrong with the process? 
Best regards,
dushyant.

Hi,
 Refer note 140147.
Regards,
Meiy

'Error 8 occurred when starting the data extraction program'

Hello Experts,
I am trying to pull master data (Full upload) for a attribute. I am getting an error on BW side i.e. 'The error occurred in Service API .'
So I checked in Source system and found that the an IDOC processing failure has occurred. The failure shows 'Error 8 occurred when starting the data extraction program'.
But when I check the extractor through RSA3, it looks fine.
Can someone inform what might be the reason of the failure for IDOC processing and how can this be avoided in future. Because the same problem kept occurring later as well.
Thanks
Regards,
KP

Hi,
Chk the idocs from SM58 of source system are processing fine into ur target system(BI system)...?
Chk thru Sm58 and give all * and target destination as ur BI system and execute and chk any entries pending there?
rgds,
Edited by: Krishna Rao on May 6, 2009 3:22 PM

TSV_TNEW_PAGE_ALLOC_FAILED when start export BSEG data

Similar Messages

Maybe you are looking for