System Copy:Failure when starting export with SAPINST
We are busy with a Unicode conversion and needs to start the export with sapinst. All pre unicode conversion steps are done, we upgraded from 4.6C to ECC6.0. It is a distrubuted system running on MSSQL. Started the export on the DB server and got the follwing error below.
Regards
Roger
INFO 2007-02-08 20:09:27
Execute step stepPreconditions of component |NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0.
INFO[E] 2007-02-08 20:09:27
FSL-02077 File system export (share) saploc does not exist.
INFO[E] 2007-02-08 20:09:27
FSL-02077 File system export (share) sapmnt does not exist.
ERROR 2007-02-08 20:09:27
CJS-00030 Assertion failed: in NW_ABAP_Export.stepPreconditions: Executable directory 'G:\usr\sap\HD3\SYS\exe\nuc\NTI386' must exist
ERROR 2007-02-08 20:09:27
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
ERROR 2007-02-08 20:09:27
FCO-00011 The step stepPreconditions with step key |NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0|stepPreconditions was executed with status ERROR .
INFO 2007-02-08 20:09:36
An error occured and the user decide to stop.\n Current step "|NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0|stepPreconditions".
Hi All
These are the steps I had to perform when I faced the issue -
Background:
Faced the issue when I was exporting the DB instance (SQL 2000) using SAPINST.
Steps:
1. We are running NW04S Portal System.Copied the E:\usr\sap\DEV.... files from CI to DB server.
2. Defined sapmnt/saploc shares for E:\usr\sap folder on DB server.
3. Created the folder E:\usr\sap\DEV\SYS\exe\uc\NTI386\mssjdbc and copied the files base.jar,util.jar,sqlserver.jar,spy.jar files from E:\usr\sap\DEV\JC00\j2ee\jdbc folder.
4. Retry the SAPINST. Final confirmation screen appeared.
5. Checked all the parameters for correctness and clicked on start...export started and finished completely.
All these steps I have done just looking at the log file.One thing I am not still clear is why SAPINST is looking for \usr\sap/...files/folder in DB instance instead of App server.
Would appriciate if any one can clarify this.
Thanks
Naresh P.
Similar Messages
-
Procedure of System copy in Solman 4.0 through sapinst based on ABAP+JAVA
Hello Everyone,
Iam on solman 4.0 based on netweaver 2004s based on ABAP+JAVA instance and database oracle 10g and on windows 2003 platform.I want to perform system copy for solman 4.0 through sapinst and if someone can provide step wise step procedure with 10-20 lines for system copy with sapinst ,it shall be gr8 help.
I hv gone through the system copy guide on OSS also but its too long and confusing also ,a 12-20 steps procedure shall be useful and helpful . Also Iam performing system copy where source system and taget system are same ie; the current sytem where application is installed , i wanna copy tat only and perform system copy on tat server only.plz revert to tat also.
Requested to revert at earliest as this is very urgent. Points guaranteed.My Email id is [email protected]
Thanks and Reagrds,
SomyaI don´t think, that the system copy guide is confusing, it has basically a step-by-step procedure, depending on the "way" use use (a backup or R3load).
There are several ways of doing a system copy and depending on the one you want to use, the procedure is slightly different.
Markus -
N97 system error message when starting Maps
Hi all,
I do get a system error message when starting the maps app.
I know that this is not a new topic but I did not find after intensive search a solution.
- Firmware is updated
- soft reset done
- it seems that the app is not installed
- have deleted the cities folder and the qf file
Unfortunately no change - maps app does not start.
Not sure that this is important but I want to mention this for the sake of completeness:
- the maps did work once
- when I started them the next day and I was at a different location it still showed the location of the previous evening abnd did not recognize where the phone was
- after some time I could not start the the maps app.
Any help greatly appreciated!
BestAhhhhhh I want to scream. This phone is driving me crazy...so many problems.. latest among others is, opening maps it gives me the error like you all mentioned above.. so how and where do I go to download what you mentioned... and I did try to go into"download" and my phone just says I don't have enough memory to download anything.. HELP
-
FATAL: shared memory region is being held at - Error when installing SAP with sapinst
Hi guys
This error is kinda odd since i have installed 3 systems under the same OS/DB Conditions
Windows 2012 R2 with ASE 15.7.
14GB Memory
30GB PageFile
Firewall Off
On the previous two systems, when executing a System Copy using an Export File it completed with no problems.
On this System Installation, during ASE Server Setup, SAPINST fails, checking ASE logs it seems releted to memory, but I cant figure out what is the problem since 14GB would be enough, and it never happened on the previous installations.
Any idea what could be causing this?
init logs.
Finished loading file 'charset.loc'.
03/13/15 06:23:20 AM End output from 'charset'.
03/13/15 06:23:20 AM Character set 'utf8' has been successfully installed.
03/13/15 06:23:20 AM Task succeeded: install a character set(s).
03/13/15 06:23:20 AM Running task: set the default character set and/or default
sort order for the Adaptive Server.
03/13/15 06:23:20 AM Setting the default character set to utf8
03/13/15 06:23:20 AM Sort order 'binary' has already been installed.
03/13/15 06:23:21 AM SQL command: exec sp_configure 'default character set id',
190, binary
03/13/15 06:23:21 AM SQL command: exec sp_configure 'default sortorder id', 25,
utf8
03/13/15 06:23:21 AM Sort order 'binary' has been successfully set to the
default.
03/13/15 06:23:23 AM SQL command: shutdown
03/13/15 06:23:25 AM Waiting 15 seconds for the operating system to reclaim
resources before rebooting.
03/13/15 06:23:45 AM Calling the shell with
'"J:\sybase\AEC\ASE-15_0\bin\sqlsrvr.exe"
-d"J:\sybase\AEC\sybsystem\master.dat" -sAEC
-e"J:\sybase\AEC\ASE-15_0\install\AEC.log"
-i"J:\sybase\AEC\ini" -M"J:\sybase\AEC\ASE-15_0" '.
03/13/15 06:23:55 AM Calling the shell with '0 = return code.'.
03/13/15 06:24:11 AM Calling the shell with
'"J:\sybase\AEC\ASE-15_0\bin\sqlsrvr.exe"
-d"J:\sybase\AEC\sybsystem\master.dat" -sAEC
-e"J:\sybase\AEC\ASE-15_0\install\AEC.log"
-i"J:\sybase\AEC\ini" -M"J:\sybase\AEC\ASE-15_0" '.
03/13/15 06:24:11 AM waiting for server 'AEC' to boot...
03/13/15 06:24:21 AM SERVER ERROR: Failed to boot server 'AEC'.
03/13/15 06:24:21 AM SERVER ERROR: Couldn't reboot server 'AEC' after changing
internal tables.
03/13/15 06:24:25 AM CONNECTIVITY ERROR: Open Client message: 'ct_connect():
network packet layer: internal net library error: Net-Lib
protocol driver call to connect two endpoints failed
Failed to connect to the server - Error is 10061 No
connection could be made because the target machine
actively refused it.
03/13/15 06:24:25 AM CONNECTIVITY ERROR: Initialization of auditinit
connectivity module failed.
03/13/15 06:24:25 AM Task failed: set the default character set and/or default
sort order for the Adaptive Server. Terminating
configuration.
03/13/15 06:24:25 AM Configuration failed.
03/13/15 06:24:25 AM Exiting.
03/13/15 06:24:25 AM The log file for this session is
'J:\sybase\AEC\ASE-15_0\init\logs\log0313.007'.
03/13/15 06:24:25 AM Log close.
Install Log
00:0000:00000:00000:2015/03/13 06:24:13.07 kernel SySAM: Using licenses from: J:\sybase\AEC\\SYSAM-2_0\licenses\SYBASE.lic;J:\sybase\AEC\\SYSAM-2_0\licenses\SYBASE_ASE_DE.lic
00:0000:00000:00000:2015/03/13 06:24:13.70 kernel SySAM: Checked out license for 2 ASE_CORE (2020.1231/permanent/100C 0F04 3F88 1821).
00:0000:00000:00000:2015/03/13 06:24:13.70 kernel This product is licensed to: SAP, for use with SAP Business Applications.
00:0000:00000:00000:2015/03/13 06:24:13.70 kernel Checked out license ASE_CORE
00:0000:00000:00000:2015/03/13 06:24:13.70 kernel Adaptive Server Enterprise (Enterprise Edition)
00:0000:00000:00000:2015/03/13 06:24:13.71 kernel Using config area from primary master device.
00:0000:00000:00000:2015/03/13 06:24:13.71 kernel Warning: Using default file 'J:\sybase\AEC\AEC.cfg' since a configuration file was not specified. Specify a configuration file name in the RUNSERVER file to avoid this message.
00:0000:00000:00000:2015/03/13 06:24:13.73 kernel Allocating a shared memory segment of size 131137536 bytes.
00:0000:00000:00000:2015/03/13 06:24:13.73 kernel WARNING: shared memory segment is being held by another application
00:0000:00000:00000:2015/03/13 06:24:13.75 kernel FATAL: shared memory region is being held at 131104768 bytes but 131137536 bytes are required
00:0000:00000:00000:2015/03/13 06:24:13.75 kernel kbcreate: couldn't create kernel region.
00:0000:00000:00000:2015/03/13 06:24:13.75 kernel kistartup: could not create shared memory
Best
MartinAfter implementing solution in Note 2011550 - SYB: SAP ASE on Windows fails to start, issue was fixed
-
R3load system copy: Error on database export
Hello all,
I am trying to do a system copy via r3load - Export and then import on a WAS 640 oracle Netweaver based system which has both ABAP and JAVA stack. The source and target system are on the same win2000 host. I am getting below errors in the export stage of the system copy. I am following the sap doc: Homogeneous and Heterogeneous System Copy for SAP Systems based on SAP Web AS ABAP 6.40 SR1 .pdf
As per the doc the below are the main steps
1) Generate DLL-statements [Page 55] (Call transaction SE38 and run the program SMIGR_CREATE_DDL...Execute the program. The DDL statements are generated and are written to thespecified directory.)
2) Run SAPinst to export the database [Page 48].
3) Set up the target system [Page 60].
I am stuck at 2) with the below errors during the export.
For step 2, the sapinst asked me to enter
source <SID>
Source <DBSID>
Source schema: I gave this as SAP<SID>
no of process and alphabetic load.
Afer this...
R3ldctlExport.log reports the below errors
WARNING: no technical settings for table "WFQUE" in SAP data dictionary - defaults used
WARNING: no technical settings for table "WFSTO" in SAP data dictionary - defaults used
WARNING: value for DD28S.CONSTANTS not in quotes, view "COVMVSVW"
WARNING: value for DD28S.CONSTANTS not in quotes, view "DVTOPAY"
WARNING: value for DD28S.CONSTANTS not in quotes, view "V_LTDX"
WARNING: value for DD28S.CONSTANTS not in quotes, view "W3TEMPLATE"
DbSl Trace: ORA-24508 occured when executing SQL statement (parse error offset = 29)
ERROR: ExeRead for get_loc_table_inf failed
ORA-24508: Message 24508 not found; product=RDBMS; facility=ORA
Error generating DDLINF.TPL
(UPT) Info: Preparing tables and tablespace entries.
(UPT) Info: Distributing tables and tablespace entries.
(WLL) Info: finished writing location lists
And sapinst reports several of the below errors...
ERROR 2007-06-17 17:24:14
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPUSER.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPDODS.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPPOOL.log
ERROR 2007-06-17 17:22:44
MSC-01015 Process finished with error(s), check log file D:\Program Files\sapinst_instdir\NW04SR1\WEBAS_ABAP_ORA_UC\EXP/SAPSDIC.log
...etc
*.TSK files are being created.
For example, if I describe for one particular package...
SAPSSEXC.TSK has entries like the below
D DM45T E ok
D DM46S E ok
D DOKCLU E err
D DOKHL E xeq
D DOKIL E xeq
D DSYST E xeq
D DYNPSOURCE E xeq
D ENLFDIR E xeq
D EUDB E xeq
D EUGUITEXT E xeq
D EUOBJ E xeq
D EUOBJEDIT E xeq
A log file SAPSSEXC.log exists which notes the termination of the r3load export process.
EXP) TABLE: "DM42S"
(EXP) TABLE: "DM42T"
(EXP) TABLE: "DM43T"
(EXP) TABLE: "DM45L"
(EXP) TABLE: "DM45T"
(EXP) TABLE: "DM46S"
(NT) Error: DOKCLU : normal NameTab from 20041108162211 younger than alternate NameTab from 20010201171049!
Syslog: k CQF : DOKCLU &20010201171049&2004110rscpgdio 47myCluster (55.13.Exp): 874: received return code 64 from rscpCheckNTTimeStamps.
myCluster (55.13.Exp): 875: suspicious create timestamp of alternate nametab encountered.
myCluster (55.13.Exp): 879: create timestamps of nametab: 20041108162211; alternate nametab: 20010201171049.
myCluster (55.13.Exp): 297: error when retrieving physical nametab for table DOKCLU.
(CNV) ERROR: code page conversion failed
rc = 2
.--============.| RSCP - Error || Error from: Codepage handling (RSCP) 3 || code: 64 RSCPECALL Illegal mixture of procedure calls. || Altername NameTab too old || module: rscpgdio no: 47 line: 2876 T100: TS007 || TSL01: CQF p3: DOKCLU &20010201171049&2004110|| |`--
'(rscpMC) Warn: env I18N_NAMETAB_TIMESTAMPS not set
(DB) INFO: disconnected from DB
I:\usr\sap\VIK\SYS\exe\run/R3load.exe: job finished with 1 error(s)
I:\usr\sap\VIK\SYS\exe\run/R3load.exe: END OF LOG: 20070617185123
Also some of the other log files for other packages terminate with:" disconnected from db" in the middle of the export.
What I tried: I tried putting in the latest patch level for r3ldctl, r3load and r3szchk kernel files. It was at kernel patch 43. I upgraded to latest 175 from market place. And restarted sapinst again to start the export again. Again I face the same problem. Sapinst aborts at this stage again. I basically took the whole sapexedb patch 175 and yupdated the kernel but it did not help.
If any of you out there can lead me in the right direction so that I can get over this stumbling block, would be grateful.
Many Thanks, Vikram
[email protected]Could anybody please tell what is the required codepage for oracle?
Our system has NLS_LANG=AMERICAN_AMERICA.WE8DEC
Thanks a lot! -
Homogeneous system copy on windows abap + java with a backup online
Hello gurus, I need to perform a refresh (HSC) from our production to our test system. we have a daily backup online that I want to use for restoring the test system .
from the procedure it's not clear how to proceed .
as my point of view i should say :
1) perform a restore redirect using backup online
2) export on the production the java side using database specific tools
3) import the java side on the restored database (when it stops to ask me to restore database i will use the backup created by the export procedure)
4) apply all the logs to the end of export of java to put the database in a consistente state
5) finish the procedure of import
my question marks are related to the step 2) and 3) . the restored database will keep the data of java side from the second backup (export) run by sapinst?
and.. do I have to apply logs till the export is finished to put db in a consistente state?
someone of you have performed it once ?
any advice is greatly apprechatedHello guys,so just to be clear again
on the target system I have to execute
db2 drop database <SID> and following delete the content of sapdata?
I have seen on this website the possibility to execute the redirect restore using the comman "replace existing" . Can I apply this without deleting anything ?
ftp://ftp.software.ibm.com/ps/products/db2/info/vr9/pdf/letter/en_US/db2hae90.pdf
REPLACE EXISTING If a database with the same alias as the target database alias already exists, this parameter specifies that the restore utility is to replace the existing database with the restored database. This is useful for scripts that invoke the restore utility, because the command line processor will not prompt the user to verify deletion of an existing database.
For the java side , once the the restore redirect has been performed successful do I have to use the option for recreating the WAS AS JAVA only as system copy only? This will populate my java side correctly with the data of my exporting system?
best regards -
System copy error when using DB depending methods
Hi,
I would like to do a system copy to transfer the database instance to another host.
My current system is ERP6.0 under NW 7.0 SR3 with DB2 9.1.7.
The kernel level is 7.20 REL running under windows 2003 R2 enterprise version.
I used the SPM 1.0 with database depended methods.
An error occurred when processing Grant Database Privileges On Tables under execute process.
Refer to below error taken from sapinst.log:
UPDATE COMMAND OPTIONS USING S OFF
DB20000I The UPDATE COMMAND OPTIONS command completed successfully.
UPDATE COMMAND OPTIONS USING A OFF
DB20000I The UPDATE COMMAND OPTIONS command completed successfully.
UPDATE COMMAND OPTIONS USING X ON
DB20000I The UPDATE COMMAND OPTIONS command completed successfully.
UPDATE COMMAND OPTIONS USING O OFF
ERROR 2014-08-05 14:41:39.29
MDB-01999 Error occured, first error is: <SQL0104N An unexpected token "" was found following ")". Expected tokens may >
ERROR 2014-08-05 14:41:39.169
MUT-03025 Caught ESAPinstException in module call: .
ERROR 2014-08-05 14:41:39.279
FCO-00011 The step drop_saptools with step key |NW_ABAP_DB|ind|ind|ind|ind|0|0|NW_CreateDBandLoad|ind|ind|ind|ind|createdbandload|0|NW_Postload|ind|ind|ind|ind|postload|0|NW_Postload_DB6|ind|ind|ind|ind|db6|0|drop_saptools was executed with status ERROR ( Last error reported by the step: Error occured, first error is: <SQL0104N An unexpected token "" was found following ")". Expected tokens may >).
INFO 2014-08-05 14:41:39.372
Creating file C:\Program Files\sapinst_instdir\BS2005\ERP60SR3\LM\COPY\DB6\SYSTEM\DISTRIBUTED\AS-ABAP\DB\__instana_tmp.xml.
INFO 2014-08-05 14:41:39.841
Removed file C:\Program Files\sapinst_instdir\BS2005\ERP60SR3\LM\COPY\DB6\SYSTEM\DISTRIBUTED\AS-ABAP\DB\instslana.xml.
INFO 2014-08-05 14:41:39.841
Creating file C:\Program Files\sapinst_instdir\BS2005\ERP60SR3\LM\COPY\DB6\SYSTEM\DISTRIBUTED\AS-ABAP\DB\instslana.xml.Hi Maria,
I backup the DB2 V9.1 using offline & restore it in V9.7 and then it will success when processing Grant
Database Privileges On Tables under execute process.
Thanks. -
System copy errors during ABAP export ECC 5.0
Hi
I'm need to do system system copy for our ECC 5.0 system on Win/ora platform. I have followed the system copy document from SMP. I'm getting the below error while exporting the ABAP schema. Could someone guide me on how to fix this.
ERROR 2008-12-25 11:32:27
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPCLUST.log
=======================
(NT) Error: AABLG: normal NameTab from 20050112230750 younger than alternate NameTab from 20000323230317!
(SYSLOG) INFO: k CQF : AABLG&20000323230317&20050112230750& rscpgdio 47
(RSCP) ERROR: -
3-
(RSCP) ERROR: code: 64 RSCPECALL
(RSCP) ERROR: Altername NameTab too old
(RSCP) ERROR: module: rscpgdio location: 47 line: 3007
(RSCP) ERROR: TSL01: CQF p3: AABLG&20000323230317&20050112230750&
(RSCP) ERROR: -
myCluster (55.20.Exp): 924: received return code 64 from rscpCheckNTTimeStamps.
myCluster (55.20.Exp): 925: suspicious create timestamp of alternate nametab encountered.
myCluster (55.20.Exp): 929: create timestamps of nametab: 20050112230750; alternate nametab: 20000323230317.
myCluster (55.20.Exp): 299: error when retrieving physical nametab for table AABLG.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
======================
ERROR 2008-12-25 11:32:27
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPPOOL.log
===========================
(NT) Error: AT01: normal NameTab from 20050112234859 younger than alternate NameTab from 20011002204708!
(SYSLOG) INFO: k CQF : AT01&20011002204708&20050112234859& rscpgdio 47
(CNVPOOL) Altername NameTab too old AT01&20011002204708&20050112234859& Abort.
(CNVPOOL) conversion failed for row 0 of table VARKEY = 010100
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) INFO: environemnt variable "I18N_POOL_WIDTH" is not set. Checks are active.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
=========================
ERROR 2008-12-25 11:32:27
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSSEXC.log
===========================
(NT) Error: DOKCLU: normal NameTab from 20050112230750 younger than alternate NameTab from 20000323224119!
(SYSLOG) INFO: k CQF : DOKCLU&20000323224119&20050112230750& rscpgdio 47
(RSCP) ERROR: -
3-
(RSCP) ERROR: code: 64 RSCPECALL
(RSCP) ERROR: Altername NameTab too old
(RSCP) ERROR: module: rscpgdio location: 47 line: 3007
(RSCP) ERROR: TSL01: CQF p3: DOKCLU&20000323224119&20050112230750&
(RSCP) ERROR: -
myCluster (55.20.Exp): 924: received return code 64 from rscpCheckNTTimeStamps.
myCluster (55.20.Exp): 925: suspicious create timestamp of alternate nametab encountered.
myCluster (55.20.Exp): 929: create timestamps of nametab: 20050112230750; alternate nametab: 20000323224119.
myCluster (55.20.Exp): 299: error when retrieving physical nametab for table DOKCLU.
(CNV) ERROR: data conversion failed. rc = 2
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
========================
ERROR 2008-12-25 11:32:27
MSC-01015 Process finished with error(s), check log file C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSDIC.log
========================
(EXP) INFO: check for inactive NameTab entries: Ok.
(RSCP) INFO: I18N_NAMETAB_TIMESTAMPS not in env: checks are ON (Note 738858)
(DB) INFO: disconnected from DB
=======================
Thanks & Regards
JaganC:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPCLUST.log
C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPPOOL.log
C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSSEXC.log
C:\Program Files\sapinst_instdir\ECC50\COPY\EXPORT\ABAP\COPY\UC\DBEXP/SAPSDIC.log
paste the above logs here.
Thanks
SM -
OS X crash report when starting XBMC with an Apple Remote
Hello,
I need help regarding a crash report on OS X 10.6.8 when using an Apple Remote (AR) to launch XBMC.
I use my Mac Mini (MM) with XBMC (11 or 12), i use my AR to start and control XBMC.
System:
- OS X 10.6.8 aka SL
- XBMC 12 aka Frodo
For several months i occasionally had crashes when starting-up XBMC via the AR (MENU button), I do not know if it came from OS X or XBMC. Instead of the XBMC loading screen i have a little gray window during 1-2 seconds and then the OS X crash.
Initially I thought of a problem with the alternative driver I use, Candelair. I use it since I started with PLEX / XBMC. So I deleted Candelair, i installed it again but nothing changes. I can do without Candelair, so I now i'm no longer using it. I also proceed to a "clean install" of OS X since then in order to avoid problems due to residual files from Candelair.
I thought that this problem was due to XBMC, i sent LOGS to devs, nothing at all, the only thing they can say is that when the problem occurs, XBMC receives two instructions instead of two when I press the supposed start, and LAUNCH QUIT Menu button:
http://forum.xbmc.org/showthread.php?tid=145389&pid=1448778#pid1448778
I thought it might be the latest version of XBMC, the dates match, so I created a "sandbox" on OS X 10.6.8, installed XBMC 11 without any addon, or similar program. It does not matter, I always have "crash reports.".
Except if this is a problem of drivers, the native OS X, or a failure of the AR itself. I don't know waht to do.
I have no idea if you have any?
Thank you
Nemrod
PS the link to the last crash report : http://pastebin.com/raw.php?i=zcs0LdZhHi,
It seems that the problem occurs when my mac idle.
Nemrod -
System copy stuck on "Import ABAP" with "Invalid Migration Key"
Dear Team,
I'm performing a system copy from AS400/DB2 (of our ECC DEV) to AIX/DB2. Export has been completed successfully, while importing it is stuck on the "Import ABAP" phase with error "Invalid Migration Key". However the key is generated with correct parameters only and even we have tried the key from SAP NOTE: 1768158 but of no use.
Below is brief about systems environment:
Source System
OS : AS/400 (IBM i-Series V6R1)
DB : DB/400 (Integrated DB with IBM i)
NW: NW 7.00 ( ECC 6.0 with SP11)
Target System
OS : AIX 7.1
DB: DB2 10.1 with FP3
NW: NW 7.00 ( ECC 6.0 with SP11)
The process is being performed using SWPM SP05
Kindly find the test_MIGKEY.log for analysis and let me know if any ideas.
Thanks in advance,
SUJITI found below error , are you doing this in distributed environment ?
Is source and target kernels are same ?
Found error in the log.
DbSl Trace: DbSlConnect to 'ECT' as 'sapect' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'ECT' as 'sapect' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR: invalid migration keybut the system wrote other errors instead, for example, (DB) ERROR: db_connect rc = 256, this does not involve an incorrect migration key. The errors should refer here to the actual cause (for example, the connect to the DB does not work). In this case, first check the database connect with the command <Z2 R3trans -x or R3load -testconnect, that must be executed as <sid>adm.Also make sure that the R3load that is used during the export and import has the same kernel release (for example, 7.00). You can check the relevant version of the R3load using 'R3load -version'.
=================== -
Commons-logging Error when starting JRun with Flex
Created new JRun Server and deployed Flex2 to this server.
Receiving this error when starting up this server instance.
Starting Macromedia JRun 4.0 (Build 92909), logicerm2 server
07/13 22:23:28 info JRun Naming Service listening on *:2911
07/13 22:23:28 warning No sessionSecret has been specified in
jrun.xml. Installi
ng a self generated sessionSecret.
07/13 22:23:28 info No JDBC data sources have been configured
for this server (s
ee jrun-resources.xml)
07/13 22:23:28 info JRun Web Server listening on *:8102
07/13 22:23:28 info Deploying enterprise application
"default-ear" from: file:/C
:/JRun4/servers/logicerm2/default-ear/
07/13 22:23:28 info Deploying web application "JRun Default
Web Application" fro
m: file:/C:/JRun4/servers/logicerm2/default-ear/
07/13 22:23:29 info Web Services in default-ear#default-war:
07/13 22:23:29 info AdminService
07/13 22:23:29 warning default-war web application has
'reload' as true in jrun-
web.xml. Consider setting it false if the application is
running in production e
nvironment.
07/13 22:23:29 warning default-war web application has
'compile' as true in jrun
-web.xml. Consider setting it false if the application is
running in production
environment.
07/13 22:23:29 user JSPServlet: init
07/13 22:23:29 info Deploying web application "Flex Data
Services" from: file:/C
:/JRun4/servers/logicerm2/flex/
07/13 22:23:29 user JSPServlet: init
07/13 22:23:29 user FlexMxmlServlet: init
07/13 22:23:29 INFO Loading configuration file
C:\JRun4\servers\logicerm2\flex\W
EB-INF\flex\flex-webtier-config.xml
07/13 22:23:30 INFO Loading configuration file
C:\JRun4\servers\logicerm2\flex\W
EB-INF\flex\flex-config.xml
07/13 22:23:30 user FlexMxmlServlet: Starting Adobe Flex Web
Tier Compiler
07/13 22:23:30 user FlexMxmlServlet: Adobe Flex Web Tier
Compiler Build: 143451
07/13 22:23:30 user MessageBrokerServlet: init
07/13 22:23:31 user FlexSwfServlet: init
07/13 22:23:31 user FlexInternalServlet: init
07/13 22:23:31 info Deploying web application "Flex Admin Web
Application" from:
file:/C:/JRun4/servers/logicerm2/flex-admin/
07/13 22:23:31 user JSPServlet: init
07/13 22:23:31 user MessageBrokerServlet: init
07/13 22:23:31 info Deploying web application "Flex Data
Services Samples" from:
file:/C:/JRun4/servers/logicerm2/samples/
07/13 22:23:31 user JSPServlet: init
07/13 22:23:31 user FlexMxmlServlet: init
07/13 22:23:32 INFO Loading configuration file
C:\JRun4\servers\logicerm2\sample
s\WEB-INF\flex\flex-webtier-config.xml
07/13 22:23:32 INFO Loading configuration file
C:\JRun4\servers\logicerm2\sample
s\WEB-INF\flex\flex-config.xml
07/13 22:23:32 user FlexMxmlServlet: Starting Adobe Flex Web
Tier Compiler
07/13 22:23:32 user FlexMxmlServlet: Adobe Flex Web Tier
Compiler Build: 143451
07/13 22:23:32 user MessageBrokerServlet: init
07/13 22:23:32 error Could not pre-load servlet:
MessageBrokerServlet
[1]org.apache.commons.logging.LogConfigurationException:
org.apache.commons.logg
ing.LogConfigurationException:
org.apache.commons.logging.LogConfigurationExcept
ion: Invalid class loader hierarchy. You have more than one
version of 'org.apa
che.commons.logging.Log' visible, which is not allowed.
(Caused by org.apache.co
mmons.logging.LogConfigurationException: Invalid class loader
hierarchy. You ha
ve more than one version of 'org.apache.commons.logging.Log'
visible, which is n
ot allowed.) (Caused by
org.apache.commons.logging.LogConfigurationException: or
g.apache.commons.logging.LogConfigurationException: Invalid
class loader hierarc
hy. You have more than one version of
'org.apache.commons.logging.Log' visible,
which is not allowed. (Caused by
org.apache.commons.logging.LogConfigurationExc
eption: Invalid class loader hierarchy. You have more than
one version of 'org.
apache.commons.logging.Log' visible, which is not allowed.))
at
org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactory
Impl.java:543)
at
org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactory
Impl.java:235)
at
org.apache.commons.logging.impl.LogFactoryImpl.getInstance(LogFactory
Impl.java:209)
at
org.apache.commons.logging.LogFactory.getLog(LogFactory.java:351)
at
org.apache.commons.httpclient.params.DefaultHttpParams.<clinit>(Defau
ltHttpParams.java:53)
at
flex.messaging.services.http.HTTPProxyAdapter.<init>(HTTPProxyAdapter
.java:111)
at
sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native
Method)
at
sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown
Source)
at
sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown
Sou
rce)
at java.lang.reflect.Constructor.newInstance(Unknown Source)
at java.lang.Class.newInstance0(Unknown Source)
at java.lang.Class.newInstance(Unknown Source)
at
flex.messaging.util.ClassUtil.createDefaultInstance(ClassUtil.java:71
at
flex.messaging.Destination.createAdapter(Destination.java:277)
at
flex.messaging.Destination.initDestination(Destination.java:103)
at
flex.messaging.services.HTTPProxyService.createDestination(HTTPProxyS
ervice.java:78)
at
flex.messaging.services.AbstractService.createDestinations(AbstractSe
rvice.java:82)
at
flex.messaging.config.MessagingConfiguration.createServices(Messaging
Configuration.java:187)
at
flex.messaging.config.MessagingConfiguration.configureBroker(Messagin
gConfiguration.java:84)
at
flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:10
5)
at
jrun.servlet.WebApplicationService.loadServlet(WebApplicationService.
java:1242)
at
jrun.servlet.WebApplicationService.preloadServlets(WebApplicationServ
ice.java:789)
at
jrun.servlet.WebApplicationService.postStart(WebApplicationService.ja
va:291)
at
jrun.deployment.DeployerService.initModules(DeployerService.java:711)
at
jrun.deployment.DeployerService.createWatchedDeployment(DeployerServi
ce.java:242)
at
jrun.deployment.DeployerService.deploy(DeployerService.java:430)
at
jrun.deployment.DeployerService.checkWatchedDirectories(DeployerServi
ce.java:179)
at
jrun.deployment.DeployerService.run(DeployerService.java:891)
at
jrunx.scheduler.SchedulerService.invokeRunnable(SchedulerService.java
:223)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.j
ava:426)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
Caused by:
org.apache.commons.logging.LogConfigurationException:
org.apache.comm
ons.logging.LogConfigurationException: Invalid class loader
hierarchy. You have
more than one version of 'org.apache.commons.logging.Log'
visible, which is not
allowed. (Caused by
org.apache.commons.logging.LogConfigurationException: Inval
id class loader hierarchy. You have more than one version of
'org.apache.common
s.logging.Log' visible, which is not allowed.)
at
org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogF
actoryImpl.java:397)
at
org.apache.commons.logging.impl.LogFactoryImpl.newInstance(LogFactory
Impl.java:529)
... 30 more
Caused by:
org.apache.commons.logging.LogConfigurationException: Invalid class
l
oader hierarchy. You have more than one version of
'org.apache.commons.logging.
Log' visible, which is not allowed.
at
org.apache.commons.logging.impl.LogFactoryImpl.getLogConstructor(LogF
actoryImpl.java:385)
... 31 more
[0]flex.messaging.config.ConfigurationException: Unable to
create service 'flex.
messaging.services.HTTPProxyService' for 'proxy-service' due
to the following er
ror: org.apache.commons.logging.LogConfigurationException:
org.apache.commons.lo
gging.LogConfigurationException: Invalid class loader
hierarchy. You have more
than one version of 'org.apache.commons.logging.Log' visible,
which is not allow
ed. (Caused by
org.apache.commons.logging.LogConfigurationException: Invalid cla
ss loader hierarchy. You have more than one version of
'org.apache.commons.logg
ing.Log' visible, which is not allowed.) (Caused by
org.apache.commons.logging.L
ogConfigurationException:
org.apache.commons.logging.LogConfigurationException:
Invalid class loader hierarchy. You have more than one
version of 'org.apache.c
ommons.logging.Log' visible, which is not allowed. (Caused by
org.apache.commons
.logging.LogConfigurationException: Invalid class loader
hierarchy. You have mo
re than one version of 'org.apache.commons.logging.Log'
visible, which is not al
lowed.)).
at
flex.messaging.config.MessagingConfiguration.createServices(Messaging
Configuration.java:202)
at
flex.messaging.config.MessagingConfiguration.configureBroker(Messagin
gConfiguration.java:84)
at
flex.messaging.MessageBrokerServlet.init(MessageBrokerServlet.java:10
5)
at
jrun.servlet.WebApplicationService.loadServlet(WebApplicationService.
java:1242)
at
jrun.servlet.WebApplicationService.preloadServlets(WebApplicationServ
ice.java:789)
at
jrun.servlet.WebApplicationService.postStart(WebApplicationService.ja
va:291)
at
jrun.deployment.DeployerService.initModules(DeployerService.java:711)
at
jrun.deployment.DeployerService.createWatchedDeployment(DeployerServi
ce.java:242)
at
jrun.deployment.DeployerService.deploy(DeployerService.java:430)
at
jrun.deployment.DeployerService.checkWatchedDirectories(DeployerServi
ce.java:179)
at
jrun.deployment.DeployerService.run(DeployerService.java:891)
at jrunx.scheduler.SchedulerS07/13 22:23:33 user
FlexSwfServlet: init
ervice.invokeRunnable(SchedulerService.java:223)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.j
ava:426)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)
PLEASE Help!!!
BernieThis can happen if you have the default-ear that JRun creates
and you install the /samples files for Flex Data Services installed
together.
The problem is with the commons-logging.jar. If you copy the
commons-logging.properties file from the
samples\WEB-INF\flex\jars\commons-logging.properties directory to
the samples\WEB-INF\classes\commons-logging.properties directory,
it will resolve the problem.
This is listed as Adobe FDS bug: 179227 -
ABAP+JAVA system copy using 3rd party export/import tools
Hi all,
I am trying to do a homogenous system copy. I am following the syscopy guide for SAP NW 7.0 SR3 ABAP+JAVA systems
We are running AIX 5.L and Oracle.
My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
I know it is possible to restore the database from an offline backup using BRTools rather than r3load and jload, and I just wanted to see if I can restore from a snap as it would save a lot of time in the procedure.
Any help or ideas would be much appreciated.
Thanks!>My question is this. We are using an IBM XiV system for our disk storage, and we are able to restore from "snaps" which is their version of images. Does anyone know if it is possible to restore or "import" the data in a system copy using an outside tool like this? If so, do you have any information on how to?
That approach is not supported.
The reason is: combined instances write the instance name and hostname in various places, on the filesystem in .properties files, in the JDBC configuration, depending on the java applications you run on top in various other places. What you're trying to do is effectively "renaming" an instance.
Technically it's possible to do it and to get it run, yes, but the supported way is running sapinst and choose ABAP + Java system copy. This will prevent you from lots of (not really documented) manual work after the copy.
Markus -
TSV_TNEW_PAGE_ALLOC_FAILED when start export BSEG data
Dear all,
We need to download contents of database table BSEG into a local file via SAP GUI.
When we start we get TSV_TNEW_PAGE_ALLOC_FAILED.
SAP ECC 6.0 Oracle 10.2.0.2 and HP-UX 11.23
There is physical memory in the system of 50 GB.
SAP Memory Curr.Use % CurUse[KB] MaxUse[KB] In Mem[KB] OnDisk[KB] SAPCurCach HitRatio %
Roll area 2,50 6.551 6.664 131.072 131.072 IDs 97,06
Page area 0,12 315 1.136 65.536 196.608 Statement 76,00
Extended memory 12,43 2.084.864 2.101.248 16.773.120 0 0,00
Heap memory 500.446 0 501.962 0 0,00
The MaxUse of Extended Memory does not exceed 2.101.248 and we still get
"Memory low. leave the transaction before taking a break!""
Can you please advice what should I tune to prepare the system to get all exports from BSEG for all fiscal years?
there are 10 000 000 in BSEG totaly
Thank you in advance.
RuzicaThis is basically SE16.
That is not the recommended way of doing that - it will
- allocate a LOT of memory on the source system - and that twice: once for reading the data and another time the same amount to fill the export table - and eventually dump (as you see it).
- create lots of traffic on your network
- will consume a lot of memory on the PC you download the data to. The grid is to be built on the client, if you're unlucky, your PC may run out of memory too
SE16 was not designed to "download" huge amounts of data, it's used to display table entries.
I suggest you create a small ABAP doing that, writing the output on the server and then either enable to user to access that file (using e. g. SAMBA) or send it via email.
Markus -
Application Launch Failure when starting Office 2004 and Adobe Photoshop
I've had my powerbook G4 for 3 months now with no problems what so ever, but recently my word, exel, powerpoint applications and even adobe photoshop cs give me a:
Application launch failure:
The application "Word" could not be launched because of a shared library error: "3<Microsoft Word><CarbonLib><CFMPriv_ImageCapture>"
i've google this problem for several days with no solution. I've tried, deleting the pref files, reinstalling office, disk verified my hdd. Nothing worked.
Does anyone have an idea what's wrong?
Powerbook G4 Mac OS X (10.4.6) 512MB RAMHi, miek. Welcome to the Discussions.
Here is some general advice on troubleshooting shared library errors.
A shared library error, in general terms, implies a missing, corrupted, or incompatible application or operating system framework. Details on frameworks and shared libraries (heavy technical reading) can be found in the "Frameworks" section of the "Software Development Overview" chapter of the Apple Developer Connection document Mac OS X Technology Overview, and the Framework Programming Guide.
Causes for shared library errors include:
• The affected application has been corrupted and must be reinstalled.
• Running incompatible versions of two applications with interdependent shared libraries.
• Disk or permission corruption.
• Corrupted operating system installation.
To resolve shared library errors:
1. As a start, perform a general checkup by running the procedure specified in my Resolving Disk, Permission, and Cache Corruption FAQ.
2. If the problem persists and only one application is affected, uninstall, then reinstall the affected application. See my "Uninstalling applications" FAQ for important advice on uninstalling software.
3. If the problem persists, multiple applications are affected, or the shared library in question is part of the operating system, then reinstall Mac OS X using the Archive and Install process. See my "General advice on performing an Archive and Install" FAQ.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link. -
Command line hangs when starting OC4J with MapViewer
Hello,
I have a simple development setup with a stand-alone oc4j instance installed via the MapViewer Quick Start Kit, on an 11g database, on a Windows XP workstation.
The problem: When I start the oc4j instance everything seems to start up successfully - the AS Control, the MapViewer EAR, etc.., but the command line window hangs after the last command is executed. It does not return to the command prompt. And if I close the Command Prompt window the oc4j instance automatically shuts down. Any thoughts on why this is hanging? Or is this normal behavior? Thank you. The text of the startup is shown below.
(Oh...and if you have any idea why I am getting a string of [ConverterRule] WARNINGS, please let me know. Thanks.)
-Dan
------- Output below --------
C:\app\oracle\product\11.1.0\db_1\oc4j_mv\j2ee\home>java -jar oc4j.jar
WARNING: Code-source C:\app\oracle\product\11.1.0\db_1\oc4j_mv\j2ee\home\applica
tions\mapviewer\web\WEB-INF\lib\dms.jar (from WEB-INF/lib/ directory in C:\app\o
racle\product\11.1.0\db_1\oc4j_mv\j2ee\home\applications\mapviewer\web\WEB-INF\l
ib) has the same filename but is not identical to /C:/app/oracle/product/11.1.0/
db_1/oc4j_mv/lib/dms.jar (from <code-source> (ignore manifest Class-Path) in MET
A-INF/boot.xml in C:\app\oracle\product\11.1.0\db_1\oc4j_mv\j2ee\home\oc4j.jar).
If it contains different versions of the same classes, it will be masked as the
latter is already visible in the search path of loader mapviewer.web.web:0.0.0.
WARNING: Code-source C:\app\oracle\product\11.1.0\db_1\oc4j_mv\j2ee\home\applica
tions\mapviewer\web\WEB-INF\lib\ojdl.jar (from WEB-INF/lib/ directory in C:\app\
oracle\product\11.1.0\db_1\oc4j_mv\j2ee\home\applications\mapviewer\web\WEB-INF\
lib) has the same filename but is not identical to /C:/app/oracle/product/11.1.0
/db_1/oc4j_mv/diagnostics/lib/ojdl.jar (from <code-source> (ignore manifest Clas
s-Path) in META-INF/boot.xml in C:\app\oracle\product\11.1.0\db_1\oc4j_mv\j2ee\h
ome\oc4j.jar). If it contains different versions of the same classes, it will be
masked as the latter is already visible in the search path of loader mapviewer.
web.web:0.0.0.
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Short,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Short)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Byte,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Byte)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Integer,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Integer)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Long,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Long)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Float,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Float)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Double,null)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(null,java.lang.Double)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ValidatorRule end
WARNING: [ValidatorRule]{faces-config/validator} Merge(javax.faces.LongRange)
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.DateTime,null
Mar 10, 2009 10:51:19 AM com.sun.faces.config.rules.ConverterRule end
WARNING: [ConverterRule]{faces-config/converter} Merge(javax.faces.Number,null)
2009-03-10 10:51:20.500 NOTIFICATION oms root path: C:\app\oracle\product\11.1.
0\db_1\oc4j_mv\j2ee\home\applications\mapviewer\web\
09/03/10 10:51:20 mbean domain: mapviewer
2009-03-10 10:51:20.500 NOTIFICATION OMSConfig mbean regisred.
2009-03-10 10:51:20.500 NOTIFICATION MapTileServer root path: C:\app\oracle\pro
duct\11.1.0\db_1\oc4j_mv\j2ee\home\applications\mapviewer\web\
09/03/10 10:51:20 mbean domain: mapviewer
2009-03-10 10:51:20.515 NOTIFICATION MCSConfig mbean regisred.
2009-03-10 10:51:20.515 NOTIFICATION MapViewer server version: Ver1033p5_B081010
2009-03-10 10:51:20.515 NOTIFICATION using default config file: C:\app\oracle\pr
oduct\11.1.0\db_1\oc4j_mv\j2ee\home\applications\mapviewer\web\WEB-INF\conf\mapV
iewerConfig.xml
2009-03-10 10:51:20.515 WARNING dcsf:true
2009-03-10 10:51:20.531 WARNING destroying ALL mapmaker instances.
2009-03-10 10:51:20.531 WARNING dcsf:true
09/03/10 10:51:20 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
2009-03-10 10:51:20.578 NOTIFICATION Spatial Provider shapefileSDP has been regi
stered.
2009-03-10 10:51:20.578 NOTIFICATION Map Recycling thread started.
2009-03-10 10:51:20.593 NOTIFICATION *** Oracle MapViewer started. ***
2009-03-10 10:51:21.515 NOTIFICATION *** Oracle MapTileServer started. ***
2009-03-10 10:51:21.531 NOTIFICATION *** Oracle Feature of Interest (FOI) Server started ***
---> This is where it hangs up. It just sits here and never returns to the command prompt.I guess I've come to the conclusion that it's normal for the command window to remain open while mapviewer is running. I just don't recall that from my previous installations.
-- considered answered.
Maybe you are looking for
-
How can I run a dos command from java on windows 98, 95?
The usage of cmd.exe in the java program to run a dos command on windows 98. 95 doesn't work as the equivalent command is command.exe But using the command.exe in the java program makes my program to hang.
-
Question on saving information in iMovie.......
I want to restore my Macbook Air. What should I do to save the information (including video, video I made, etc) in iMovie? What should I do after restoration? Thanks!
-
With what does iPhone Reminders Sync?
I can change the time period for which Reminders will sync. But I can't identify what reminders is syncing with. What is the source?
-
IChat freezing and not responding during video chats!
I'll start a video chat, and then about 20-30 seconds in, the chat will freeze, and iChat will become completely unresponsive. Then, I have to force quit it, start it back up, and only run into the same problem again! Any help would be greatly apprec
-
In need of some confirmati​on
I had verizon for 3-6 days back in feb, I wont drag a huge story but........... its may and I havent recieved the small portion of my deposit that was said to be returned when a special department looked it over. I guess Im asking if they actually e